| Age | Commit message (Collapse) | Author |
|---|
|
This was just to facilitate product enablement with pre-production hw.
Allows us to kill quite a bit of cruft.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
... and add a helpr function for the places where we want a flag.
This way we can use ring->id to index into arrays.
v2: Resurrect the missing beautification-space Chris Wilson noted.
I'm moving this space around because I'll reuse ring_str in the next
patch.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
We have always been using the wrong bit -- it's bit 12. However, the
bit also doesn't do anything -- hardware has always accepted the
MI_FLUSH command even when it was specced not to.
Given that there is only one MI_FLUSH emitted in all of the driver
stack on gen6+ (in i965_video.c of the 2d driver, and it should be
using other code to do its flush instead), just remove the MI_FLUSH
enable instead of trying to fix it.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
This reverts commit 42ff6572e5a4a7414330a4ca91f0335da67deca9.
New forcewake voodoo makes this no longer necessary.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
Two things seem to do the trick on my ivb machine here:
- prevent the gt from powering down while waiting for seqno
notification interrupts by grabbing the force_wake in get_irq (and
dropping it in put_irq again).
- ordering writes from the ring's CS by reading a CS register, ACTHD
seems to work.
Only the blt&bsd ring on ivb seem to be massively affected by this,
but for paranoia do this dance also on the render ring and on snb
(i.e. all gpus with forcewake).
Tested with Eric's glCopyPixels loop which without this patch scores a
missed irq every few seconds.
This patch needs my forcewake rework to use a spinlock instead of
dev->struct_mutex.
After crawling through docs a lot I've found the following nugget:
Internal doc "SNB GT PM Programming Guide", Section 4.3.1:
"GT does not generate interrupts while in RC6 (by design)"
So it looks like rc6 and irq generation are indeed related.
v2: Improve the comment per Eugeni Dodonov's suggestion.
v3: Add the documentation snipped. Also restrict the w/a to ivb only
for -fixes, as suggested by Keith Packard.
Cc: stable@kernel.org
Cc: Eric Anholt <eric@anholt.net>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Eugeni Dodonov <eugeni.dodonov@intel.com>
Tested-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
In the pre-gem days with non-existing hangcheck and gpu reset code,
this timeout of 3 seconds was pretty important to avoid stuck
processes.
But now we have the hangcheck code in gem that goes to great length
to ensure that the gpu is really dead before declaring it wedged.
So there's no need for this timeout anymore. Actually it's even harmful
because we can bail out too early (e.g. with xscreensaver slip)
when running giant batchbuffers. And our code isn't robust enough
to properly unroll any state-changes, we pretty much rely on the gpu
reset code cleaning up the mess (like cache tracking, fencing state,
active list/request tracking, ...).
With this change intel_begin_ring can only fail when the gpu is
wedged, and it will return -EAGAIN (like wait_request in case the
gpu reset is still outstanding).
v2: Chris Wilson noted that on resume timers aren't running and hence
we won't ever get kicked out of this loop by the hangcheck code. Use
an insanely large timeout instead for the HAS_GEM case to prevent
resume bugs from totally hanging the machine.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
Previous to this commit, testing easily reproduced a failure where the
seqno would apparently arrive after the IRQ associated with it, with test programs as simple as:
for (;;) {
glCopyPixels(0, 0, 1, 1);
glFinish();
}
Various workarounds we've seen for previous generations didn't work to
fix this issue, so until new information comes in, replace the IRQ
waits on the BLT ring with polling.
Signed-off-by: Eric Anholt <eric@anholt.net>
Tested-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
The docs say this is required for Gen7, and since the bit was added for
Gen6, we are also setting it there pit pf paranoia. Particularly as
Chris points out, if PIPE_CONTROL counts as a 3d state packet.
This was found through doc inspection by Ken and applies to Gen6+;
Reported-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
v2 by danvet: Use a new flag to flush the render target cache on gen6+
(hw reuses the old write flush bit), as suggested by Ben Widawsdy.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
[danvet: this seems to fix cairo-perf-trace hangs on my snb]
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
"STALL_AT_SCOREBOARD" is much clearer than "STALL_EN" now that there are
several different kinds of stalls. Also, "INSTRUCTION_CACHE_INVALIDATE"
is a lot easier to understand at a glance than the terse "IS_FLUSH."
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
[danvet: use INVALIDATE for ro cache flags for more consistency]
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
Not all PIPE_CONTROLs have a length of 2, so remove it from the #define
and make each invocation specify the desired length.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
[danvet: implement style suggestion from Ben Widawsdy]
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
While I think the previous code is correct, it was hard to follow and
hard to debug. Since we already have a ring abstraction, might as well
use it to handle the semaphore updates and compares.
I don't expect this code to make semaphores better or worse, but you
never know...
v2:
Remove magic per Keith's suggestions.
Ran Daniel's gem_ring_sync_loop test on this.
v3:
Ignored one of Keith's suggestions.
v4:
Removed some bloat per Daniel's recommendation.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
Various issues involved with the space character were generating
warnings in the checkpatch.pl file. This patch removes most of those
warnings.
Signed-off-by: Akshay Joshi <me@akshayjoshi.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
Prior to Ivybridge, the GFX_MODE would default to 0x800, meaning that
MI_FLUSH would flush the TLBs in addition to the rest of the caches
indicated in the MI_FLUSH command. However starting with Ivybridge, the
register defaults to 0x2800 out of reset, meaning that to invalidate the
TLB we need to use PIPE_CONTROL. Since we're not doing that yet, go
back to the old default so things work.
v2: don't forget to actually *clear* the new bit
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
|
|
|
Physically-addressed hardware status pages are initialized early in
the driver load process by i915_init_phys_hws. For UMS environments,
the ring structure is not initialized until the X server starts. At
that point, the entire ring structure is re-initialized with all new
values. Any values set in the ring structure (including
ring->status_page.page_addr) will be lost when the ring is
re-initialized.
This patch moves the initialization of the status_page.page_addr value
to intel_render_ring_init_dri.
Signed-off-by: Keith Packard <keithp@keithp.com>
Cc: stable@kernel.org
|
|
[anholt v2: Don't forget that when going from cached to uncached, we
haven't been tracking the write domain from the CPU perspective, since
we haven't needed it for GPU coherency.]
[ickle v3: We also need to make sure we relinquish any fences on older
chipsets and clear the GTT for sane domain tracking.]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
This patch depends on patch "drm/i915: fix user irq miss in BSD ring on
g4x".
Once the previous patch apply, ring_get_irq/ring_put_irq become unused.
So simply remove them.
Signed-off-by: Feng, Boqun <boqun.feng@intel.com>
Reviewed-by: Xiang, Haihao <haihao.xiang@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
On g4x, user interrupt in BSD ring is missed.
This is because though g4x and ironlake share the same bsd_ring,
their interrupt control interfaces have _two_ differences.
1.different irq enable/disable functions:
On g4x are i915_enable_irq and i915_disable_irq.
On ironlake are ironlake_enable_irq and ironlake_disable_irq.
2.different irq flag:
On g4x user interrupt flag in BSD ring on is I915_BSD_USER_INTERRUPT.
On ironlake is GT_BSD_USER_INTERRUPT
Old bsd_ring_get/put_irq call ring_get_irq and ring_get_irq.
ring_get_irq and ring_put_irq only call ironlake_enable/disable_irq.
So comes the irq miss on g4x.
To fix this, as other rings' code do, conditionally call different
functions(i915_enable/disable_irq and ironlake_enable/disable_irq)
and use different interrupt flags in bsd_ring_get/put_irq.
Signed-off-by: Feng, Boqun <boqun.feng@intel.com>
Reviewed-by: Xiang, Haihao <haihao.xiang@intel.com>
Cc: stable@kernel.org
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
They have been moved from the ringbuffer groups to their own group it
looks like. Fixes GPU hangs on gnome startup.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
Use Sandy Bridge paths in a few places.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
... to clarify just how we use it inside the driver and remove the
confusion of the poorly matching agp_type names. We still need to
translate through agp_type for interface into the fake AGP driver.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
Added a new function which waits for the ringbuffer space to be equal to
(total - 8). This is the empty condition of the ringbuffer, and
equivalent to head==tail.
Also modified two users of this functionality elsewhere in the code.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Required so that we don't obliterate the queue if initialising the
rings after the global IRQ handler is installed.
[Jesse, you recently looked at refactoring the IRQ installation
routines, does moving the initialisation of ring buffer data structures away
from that routine make sense in your grand scheme?]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
We always skipped flushing the BLT ring if the request flush did not
include the RENDER domain. However, this neglects that we try to flush
the COMMAND domain after every batch and before the breadcrumb interrupt
(to make sure the batch is indeed completed prior to the interrupt
firing and so insuring CPU coherency). As a result of the missing flush,
incoherency did indeed creep in, most notable when using lots of command
buffers and so potentially rewritting an active command buffer (i.e.
the GPU was still executing from it even though the following interrupt
had already fired and the request/buffer retired).
As all ring->flush routines now have the same preconditions, de-duplicate
and move those checks up into i915_gem_flush_ring().
Fixes gem_linear_blit.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=35284
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: mengmeng.meng@intel.com
|
|
Grab the latest stabilisation bits from -fixes and some suspend and
resume fixes from linus.
Conflicts:
drivers/gpu/drm/i915/i915_drv.h
drivers/gpu/drm/i915/i915_irq.c
|
|
A lot of minor tweaks to fix the tracepoints, improve the outputting for
ftrace, and to generally make the tracepoints useful again. It is a start
and enough to begin identifying performance issues and gaps in our
coverage.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
|
|
Instead of reporting EIO upfront in the entrance of an ioctl that may or
may not attempt to use the GPU, defer the actual detection of an invalid
ioctl to when we issue a GPU instruction. This allows us to continue to
use bo in video memory (via pread/pwrite and mmap) after the GPU has hung.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Merge important suspend and resume regression fixes and resolve the
small conflict.
Conflicts:
drivers/gpu/drm/i915/i915_dma.c
|
|
During suspend, Linus found that his machine would hang for 3 seconds,
and identified that intel_ring_buffer_wait() was the culprit:
"Because from looking at the code, I get the notion that
"intel_read_status_page()" may not be exact. But what happens if that
inexact value matches our cached ring->actual_head, so we never even
try to read the exact case? Does it _stay_ inexact for arbitrarily
long times? If so, we might wait for the ring to empty forever (well,
until the timeout - the behavior I see), even though the ring really
_is_ empty."
As the reported HEAD position is only updated every time it crosses a
64k boundary, whilst draining the ring it is indeed likely to remain one
value. If that value matches the last known HEAD position, we never read
the true value from the register and so trigger a timeout.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
This is better handled through the tracepoints and just clutters the
debug logs.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
We weren't setting up the vfunc table when initialising the old DRI
ringbuffer, leading to such OOPSes as:
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<(null)>] (null)
PGD 10c441067 PUD 1185e5067 PMD 0
Oops: 0010 [#1] PREEMPT SMP
last sysfs file: /sys/class/dmi/id/chassis_asset_tag
CPU 3
Modules linked in: i915 drm_kms_helper drm fb fbdev i2c_algo_bit
cfbcopyarea video backlight output cfbimgblt cfbfillrect autofs4 ipv6
nfs lockd fscache nfs_acl auth_rpcgss sunrpc coretemp hwmon_vid mousedev
usbhid hid option usb_wwan snd_hda_codec_via asus_atk0110 atl1e
usbserial snd_hda_intel snd_hda_codec firmware_class snd_hwdep snd_pcm
snd_seq snd_timer snd_seq_device processor parport_pc thermal snd
thermal_sys parport 8250_pnp button rng_core rtc_cmos shpchp hwmon
rtc_core ehci_hcd pci_hotplug uhci_hcd soundcore tpm_tis i2c_i801
rtc_lib tpm serio_raw snd_page_alloc tpm_bios i2c_core usbcore psmouse
intel_agp sg pcspkr sr_mod evdev cdrom ext3 jbd mbcache dm_mod sd_mod
ata_piix libata scsi_mod unix
Jan 18 15:49:29 lithui kernel:
Pid: 3605, comm: Xorg Not tainted 2.6.36.2 #5 P5KPL-CM/System Product
Name
RIP: 0010:[<0000000000000000>] [<(null)>] (null)
RSP: 0018:ffff8801150d1d40 EFLAGS: 00010202
RAX: 000000000001ffff RBX: ffff88011a011b00 RCX: 000000000001a704
RDX: ffff880118566028 RSI: ffff880118566028 RDI: ffff880117876800
RBP: ffff8801150d1d48 R08: ffff8801195fe300 R09: 00000000c0086444
R10: 0000000000000001 R11: 0000000000003206 R12: ffff880117876800
R13: ffff880118566000 R14: ffff880117876820 R15: ffff8801150d1df8
FS: 00007f1038d456e0(0000) GS:ffff880001780000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000001187e7000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process Xorg (pid: 3605, threadinfo ffff8801150d0000, task
ffff88011b016e40)
Stack:
ffffffffa043b8e6 ffff8801150d1d98 ffffffffa041768b dead000000000000
<0> 0000000000000048 00007f1023f2a000 0000000000000044 0000000000000008
<0> ffff88010d26bd80 ffff880117876800 ffff8801150d1df8 ffff8801150d1ea8
Call Trace:
[<ffffffffa043b8e6>] ? intel_ring_advance+0x16/0x20 [i915]
[<ffffffffa041768b>] i915_irq_emit+0x15b/0x240 [i915]
[<ffffffffa03ea7b1>] drm_ioctl+0x1f1/0x460 [drm]
[<ffffffffa0417530>] ? i915_irq_emit+0x0/0x240 [i915]
[<ffffffff810dd8f1>] ? do_sync_read+0xd1/0x120
[<ffffffff81025b1f>] ? do_page_fault+0x1df/0x3d0
[<ffffffff810ed5c7>] do_vfs_ioctl+0x97/0x550
[<ffffffff8115c2ea>] ? security_file_permission+0x7a/0x90
[<ffffffff810edb19>] sys_ioctl+0x99/0xa0
[<ffffffff810024ab>] system_call_fastpath+0x16/0x1b
Code: Bad RIP value.
RIP [<(null)>] (null)
RSP <ffff8801150d1d40>
CR2: 0000000000000000
Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Herbert Xu <herbert@gondor.apana.org.au>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29153
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=23172
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
|
|
As the IMR for the USER interrupts are not modified elsewhere, we can
separate the spinlock used for these from that of hpd and pipestats.
Those two IMR are manipulated under an IRQ and so need heavier locking.
Reported-and-tested-by: Alexey Fisher <bug-track@fisher-privat.net>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
... and move it under the spinlock to gain the appropriate memory
barriers.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=32752
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Otherwise we may consume 20% of the CPU just handling IRQs whilst
rendering. Ouch.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
On i830 if the tail pointer is set to within 2 cachelines of the end of
the buffer, the chip may hang. So instead if the tail were to land in
that location, we pad the end of the buffer with NOPs, and start again
at the beginning.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Restore PIPE_CONTROL once again just for Ironlake, as it appears that
MI_USER_INTERRUPT does not have the same coherency guarantees, that is
on Ironlake the interrupt following a GPU write is not guaranteed to
arrive after the write is coherent from the CPU, as it does on the
other generations.
Reported-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Reported-by: Shuang He <shuang.he@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=32402
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
In order to enforce the correct memory barriers for irq get/put, we need
to perform the actual counting using atomic operations.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
|
|
If the tail advances beyond the autoreport HEAD value, then we need to
fallback to an uncached read of the HEAD register in order to ascertain
the correct amount of remaining space in the ringbuffer.
Reported-by: Fang, Xun <xunx.fang@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=32259
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Conflicts:
drivers/gpu/drm/i915/i915_gem.c
drivers/gpu/drm/i915/intel_dp.c
|
|
The workaround is hideous and we are using the STORE_DWORD on all other
generations on all other rings, so use for the gen5 render ring as
well.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
There's not much we can do here but hope for the best. However the first
failure happens quite frequently and if often remedied by the second
attempt to reset HEAD. So only print the error if that attempt also
fails.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=19802
Reported-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
|
|
The bulk of the change is to convert the growing list of rings into an
array so that the relationship between the rings and the semaphore sync
registers can be easily computed.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
This makes the various rings more consistent by removing the anomalous
handing of the rendering ring execbuffer dispatch.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
The pipe control object is allocated by the device for the sole use of the
render ringbuffer. Move this detail from the general code to the render
ring buffer initialisation.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
