aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/intel_display.c
AgeCommit message (Collapse)Author
2014-03-05drm/i915: Use DIV_ROUND_UP() when calculating number of required FDI lanesVille Syrjälä
If we need precisely N lanes to satisfy the FDI bandwidth requirement, the code would still claim that we need N+1 lanes. Use DIV_ROUND_UP() to get a more accurate answer. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-05drm/i915: Perform pageflip using mmio if the GPU is terminally wedgedChris Wilson
After a hang and failed reset, we cannot use the GPU to execute the page flip instructions. Instead we can force a synchronous mmio flip. (Later, we can reduce the synchronicity of the mmio flip by moving some of the delays off to a worker, like the current page flip code; see vblank tasks.) References: https://bugs.freedesktop.org/show_bug.cgi?id=72631 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-05drm/i915: kill dev_priv->pc8.gpu_idlePaulo Zanoni
Since the addition of dev_priv->mm.busy, there's no more need for dev_priv->pc8.gpu_idle, so kill it. Notice that when you remove gpu_idle, hsw_package_c8_gpu_idle and hsw_package_c8_gpu_busy become identical to hsw_enable_package_c8 and hsw_disable_package_c8, so just use them. Also, when we boot the machine, dev_priv->mm.busy initially considers the machine as idle. This is opposed to dev_priv->pc8.gpu_idle, which considered it busy. So dev_priv->pc8.disable_count has to be initalized to 1 now. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-05drm/i915: put runtime PM only at the end of intel_mark_idlePaulo Zanoni
Because intel_mark_idle still touches some registers: it needs the machine to be awake. If you set both the autosuspend and PC8 delays to zero, you can get a "Device suspended" WARN when gen6_rps_idle touches registers. This is not easy to reproduce, but happens once in a while when running pm_pc8. Testcase: igt/pm_pc8 Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-05drm/i915: Accurately track when we mark the hardware as idle/busyChris Wilson
We currently call intel_mark_idle() too often, as we do so as a side-effect of processing the request queue. However, we the calls to intel_mark_idle() are expected to be paired with a call to intel_mark_busy() (or else we try to idle the hardware by accessing registers that are already disabled). Make the idle/busy tracking explicit to prevent the multiple calls. v2: We can drop some of the complexity in __i915_add_request() as queue_delayed_work() already behaves as we want (not requeuing the item if it is already in the queue) and mark_busy/mark_idle imply that the idle task is inactive. v3: We do still need to cancel the pending idle task so that it is sent again after the current busy load completes (not in the middle of it). Reported-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-05drm/i915: use power domain api to check vga power stateImre Deak
This way we can reuse the check on other platforms too. Also factor out a version of the function that doesn't check if the power is on, we'll need to call this from within the power domain framework. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-05drm/i915: use drm_i915_private everywhere in the power domain apiImre Deak
The power domains framework is internal to the i915 driver, so pass drm_i915_private instead of drm_device to its functions. Also remove a dangling intel_set_power_well() declaration. No functional change. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-05drm/i915: Reject changes of fb base when we have a flip pendingChris Wilson
This should be impossible due to the wait for outstanding flips that the caller is meant to perform prior to updating the scanout base. Paranoia tells me to check anyway. References: https://bugs.freedesktop.org/show_bug.cgi?id=75502 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-05drm/i915: re-add locking around hw state readoutJesse Barnes
To silence locking complaints. This was a rebase failure on my part in commit fa9fa083d0606cb323f6105c17702460ea0a6780 Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Tue Feb 11 15:28:56 2014 -0800 drm/i915: read out hw state earlier v2 Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-04drm/i915: rename modeset_update_power_wellsPaulo Zanoni
To modeset_update_crtc_power_domains, since this function is responsible for updating all the power domains of all CRTCs after a modeset. In the future we should also run this function on all platforms, not just Haswell. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-04Merge tag 'drm-intel-next-2014-02-14' of ↵Dave Airlie
ssh://git.freedesktop.org/git/drm-intel into drm-next - Fix the execbuf rebind performance regression due to topic/ppgtt (Chris). - Fix up the connector cleanup ordering for sdvod i2c and dp aux devices (Imre). - Try to preserve the firmware modeset config on driver load. And a bit of prep work for smooth takeover of the fb contents (Jesse). - Prep cleanup for larger gtt address spaces on bdw (Ben). - Improve our vblank_wait code to make hsw modesets faster (Paulo). - Display debugfs file (Jesse). - DRRS prep work from Vandana Kannan. - pipestat interrupt handler to fix a few races around vblank/pageflip handling on byt (Imre). - Improve display fuse handling for display-less SKUs (Damien). - Drop locks while stalling for the gpu when serving pagefaults to improve interactivity (Chris). - And as usual piles of other improvements and small fixes all over. * tag 'drm-intel-next-2014-02-14' of ssh://git.freedesktop.org/git/drm-intel: (65 commits) drm/i915: fix NULL deref in the load detect code drm/i915: Only bind each object rather than for every execbuffer drm/i915: Directly return the vma from bind_to_vm drm/i915: Simplify i915_gem_object_ggtt_unpin drm/i915: Allow blocking in the PDE alloc when running low on gtt space drm/i915: Don't allocate context pages as mappable drm/i915: Handle set_cache_level errors in the status page setup drm/i915: Don't pin the status page as mappable drm/i915: Don't set PIN_MAPPABLE for legacy ringbuffers drm/i915: Handle set_cache_level errors in the pipe control scratch setup drm/i915: split PIN_GLOBAL out from PIN_MAPPABLE drm/i915: Consolidate binding parameters into flags drm/i915: sdvo: add i2c sysfs symlink to the connector's directory drm/i915: sdvo: fix error path in sdvo_connector_init drm/i915: dp: fix order of dp aux i2c device cleanup drm/i915: add unregister callback to connector drm/i915: don't reference null pointer at i915_sink_crc drm/i915/lvds: Remove dead code from failing case drm/i915: don't preserve inherited configs with nothing on v2 drm/i915/bdw: Split up PPGTT cleanup ...
2014-03-03drm/i915: fix assert_cursor on BDWPaulo Zanoni
We need to read the correct register, not a register that doesn't exist and will trigger "Unclaimed register" messages when we touch it. Also rearrange the checks in an attempt to prevent this error from happening again. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [Jani: dropped an extra empty line introduced.] Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-03-02drm/i915: sprinkle staticDaniel Vetter
Apparently we've missed a few more than what Fengguang's 0-day tester recently reported in i915_irq.c ... Makes sparse happy again (ignore some spurious stuff about ksyms of exported functions). Cc: kbuild test robot <fengguang.wu@intel.com> Cc: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-27Merge tag 'drm-intel-next-2014-02-07' of ↵Dave Airlie
ssh://git.freedesktop.org/git/drm-intel into drm-next - Yet more steps towards atomic modeset from Ville. - DP panel power sequencing improvements from Paulo. - irq code cleanups from Ville. - 5.4 GHz dp lane clock support for bdw/hsw from Todd. - Clock readout support for hsw/bdw (aka fastboot) from Jesse. - Make pipe underruns report at ERROR level (Ville). This is to check our improved watermarks code. - Full ppgtt support from Ben for gen7. - More fbc fixes and improvements from Ville all over the place, unfortunately not yet enabled by default on more platforms. - w/a cleanups from Ville. - HiZ stall optimization settings (Chia-I Wu). - Display register mmio offset refactor patch from Antti. - RPS improvements for corner-cases from Jeff McGee. * tag 'drm-intel-next-2014-02-07' of ssh://git.freedesktop.org/git/drm-intel: (166 commits) drm/i915: Update rps interrupt limits drm/i915: Restore rps/rc6 on reset drm/i915: Prevent recursion by retiring requests when the ring is full drm/i915: Generate a hang error code drm/i915: unify FLIP_DONE macro names drm/i915: vlv: s/spin_lock_irqsave/spin_lock/ in irq handler drm/i915: factor out valleyview_pipestat_irq_handler drm/i915: vlv: don't unmask IIR[DISPLAY_PIPE_A/B_VBLANK] interrupt drm/i915: Reorganize display pipe register accesses drm/i915: Treat using a purged buffer as a source of EFAULT drm/i915: Convert EFAULT into a silent SIGBUS drm/i915: release mutex in i915_gem_init()'s error path drm/i915: check for oom when allocating private_default_ctx drm/i915/vlv: WA to fix Voltage not getting dropped to Vmin when Gfx is power gated. drm/i915: Get rid of acthd based guilty batch search drm/i915: Use hangcheck score to find guilty context drm/i915: Drop WaDisablePSDDualDispatchEnable:ivb for IVB GT2 drm/i915: Fix IVB GT2 WaDisableDopClockGating and WaDisablePSDDualDispatchEnable drm/i915: Don't access snooped pages through the GTT (even for error capture) drm/i915: Only print information for filing bug reports once ... Conflicts: drivers/gpu/drm/i915/intel_dp.c
2014-02-18Merge tag 'drm-intel-fixes-2014-02-14' of ↵Dave Airlie
ssh://git.freedesktop.org/git/drm-intel into drm-fixes 3 fixes plus 1 prep patch, all four cc: stable. Jani will take over from here and the plan is that he'll do 3.14-fixes for the entire release just to work things out a bit. * tag 'drm-intel-fixes-2014-02-14' of ssh://git.freedesktop.org/git/drm-intel: drm/i915/dp: add native aux defer retry limit drm/i915/dp: increase native aux defer retry timeout drm/i915: Prevent MI_DISPLAY_FLIP straddling two cachelines on IVB drm/i915: Add intel_ring_cachline_align()
2014-02-14drm/i915: tune down user-triggerable dmesg noise in the cursor/overlay codeDaniel Vetter
Spotted while auditing the code for fencing issues. Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-14drm/i915: fix NULL deref in the load detect codeDaniel Vetter
Looks like I've missed one of the potential NULL deref bugs in Jesse's fbdev->fb embedded struct to pointer conversions. Fix it up. This regression has been introduced in commit 8bcd45534ddf68ab71aeed709dacd9cf65dc0f75 Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Fri Feb 7 12:10:38 2014 -0800 drm/i915: alloc intel_fb in the intel_fbdev struct Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-14drm/i915: add unregister callback to connectorImre Deak
Since commit d9255d57147e1dbcebdf6670409c2fa0ac3609e6 Author: Paulo Zanoni <paulo.r.zanoni@intel.com> Date:   Thu Sep 26 20:05:59 2013 -0300 it became clear that we need to separate the unload sequence into two parts: 1. remove all interfaces through which new operations on some object (crtc, encoder, connector) can be started and make sure all pending operations are completed 2. do the actual tear down of the internal representation of the above objects The above commit achieved this separation for connectors by splitting out the sysfs removal part from the connector's destroy callback and doing this removal before calling drm_mode_config_cleanup() which does the actual tear-down of all the drm objects. Since we'll have to customize the interface removal part for different types of connectors in the upcoming patches, add a new unregister callback and move the interface removal part to it. No functional change. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Antti Koskipää <antti.koskipaa@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-12drm/i915: kill intel_crtc_update_sarea_posDaniel Vetter
We assign the sarea_priv pointer only in the dma ioctl, which is disallowed when kernel modesetting is enabled. So this is dead code. Cc: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-12drm/i915: allow re-use BIOS connector config for initial fbdev config v3Jesse Barnes
The BIOS or boot loader will generally create an initial display configuration for us that includes some set of active pipes and displays. This routine tries to figure out which pipes and connectors are active and stuffs them into the crtcs and modes array given to us by the drm_fb_helper code. The overall sequence is: intel_fbdev_init - from driver load intel_fbdev_init_bios - initialize the intel_fbdev using BIOS data drm_fb_helper_init - build fb helper structs drm_fb_helper_single_add_all_connectors - more fb helper structs intel_fbdev_initial_config - apply the config drm_fb_helper_initial_config - call ->probe then register_framebuffer() drm_setup_crtcs - build crtc config for fbdev intel_fb_initial_config - find active connectors etc drm_fb_helper_single_fb_probe - set up fbdev intelfb_create - re-use or alloc fb, build out fbdev structs v2: use BIOS connector config unconditionally if possible (Daniel) check for crtc cloning and reject (Daniel) fix up comments (Daniel) v3: use command line args and preferred modes first (Ville) Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [danvet: Re-add the WARN_ON for a missing encoder crtc - the state sanitizer should take care of this. And spell-ocd the comments.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-12drm/i915: Pass explicit mode into mode_from_pipe_config v3Daniel Vetter
We want to reuse this in the fbdev initial config code independently from any fastboot hacks. So allow a bit more flexibility. v2: Forgot to git add ... v3: make non-static (Jesse) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-12drm/i915: read out hw state earlier v2Jesse Barnes
We want to do this early on before we try to fetch the plane config, which depends on some of the pipe config state. Note that the important part is that we do this before we initialize gem, since otherwise we can't properly pre-reserve the stolen memory for framebuffers inherited from the bios. v2: split back out from get_plane_config change (Daniel) update for recent locking & reset changes (Jesse) Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Explain a bit more why we need to move this.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-12drm/i915: WARN in case we're enabling the pipe and it's enabledPaulo Zanoni
... and QUIRK_PIPEA_FORCE is not present. I initially thought that case was impossible and just added a WARN on it, but then I was told this case is possible due to QUIRK_PIPEA_FORCE. So let's add a WARN that serves two purposes: - tell us in case we have done something wrong; - document the only case where we expect this. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-12drm/i915: remove wait_for_vblank argument form intel_enable_pipePaulo Zanoni
Add a nice comment explaining why we shouldn't wait for a vblank on all cases, wait based on the HW gen, and add a comment saying we should probably skip that wait on some of the previous HW gens. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-12drm/i915: remove "dsi" argument form intel_enable_pipePaulo Zanoni
Now that we pass struct intel_crtc as an argument, we can check for DSI inside the function, removing one more of those confusing boolean arguments. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-12drm/i915: remove pch_port argument form intel_enable_pipePaulo Zanoni
Now that we pass struct intel_crtc as an argument, there's no need for it. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-12drm/i915: pass intel_crtc as argument for intel_enable_pipePaulo Zanoni
We want to remove those 3 boolean arguments. This is the first step. The "pipe" passed as the argument is always intel_crtc->pipe. Also adjust the function documentation. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-12drm/i915: remove the vblank_wait hack from HSW+Paulo Zanoni
When I forked haswell_crtc_enable I copied all the code from ironlake_crtc_enable. The last piece of the function contains a big comment with a call to intel_wait_for_vblank. After this fork, we rearranged the Haswell code so that it enables the planes as the very last step of the modeset sequence, so we're sure that we call intel_enable_primary_plane after the pipe is really running, so the vblank waiting functions work as expected. I really believe this is what fixes the problem described by the big comment, so let's give it a try and get rid of that intel_wait_for_vblank, saving around 16ms per modeset (and init/resume). We can always revert if needed :) Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-12drm/i915: don't wait for vblank after enabling pipe on HSWPaulo Zanoni
Because on Haswell, the pipe is never running at this point, so we hit the 50ms timeout waiting for nothing. We already have two other places where we wait for vblanks on haswell_crtc_enable, so we're safe. This gets us rid of one instance of "vblank wait timed out" for each mode set, which means driver init and resume are also 50ms faster. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-12drm/i915: add wait_for_vblank argument to intel_enable_pipePaulo Zanoni
Depending on the HW gen and the connector type, the pipe won't start running right after we call intel_enable_pipe, so that intel_wait_for_vblank call we currently have will just sit there for the full 50ms timeout. So this patch adds an argument that will allow us to avoid the vblank wait in case we want. Currently all the callers still request for the vblank wait, so the behavior should still be the same. We also added a POSTING_READ on the register: previously intel_wait_for_vblank was acting as a POSTING_READ, but now if wait_for_vblank is false we'll stkip it, so we need an explicit POSTING_READ. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-12drm/i915: split aligned height calculation out v2Jesse Barnes
For use by get_plane_config. v2: cleanup tile_height bits (Chris) Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-12drm/i915: Fix error path leak in fbdev fb allocationDaniel Vetter
In Jesse's patch to switch the fbdev framebuffer from an embedded struct to a pointer the kfree in case of an error was missed. Fix this up by using our own internal fb allocation helper directly instead of reinventing that wheel. We need a to_intel_framebuffer cast unfortunately since all the other callers of _create still look better whith using a drm_framebuffer as return pointer. v2: Add an unlocked __intel_framebuffer_create function since our dev->struct_mutex locking is too much a mess. With ppgtt we even need it to take a look at the global gtt offset of pinned objects, since the vma list might chance from underneath us. At least with the current global gtt lookup functions. Reported by Mika. Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-12drm/i915: Use normal fb deref for the fbcon framebufferDaniel Vetter
Now that it's a normally kmalloce buffer we can use the usual cleanup paths. The upside here is that if we get the refcounting wrong will be able to catch it, since the drm core will complain about leftover framebuffers and kref about underflows. v2: Kill intel_framebuffer_fini - no longer needed now that we refcount all fbs properly and only confusing. v3: We actually still need to call unregister_private to remove the fb from the idr and drop the idr reference - the final unref doesn't do that. So much for remembering my own fb liftime rules. Reported by Imre Deak. Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v2) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-12drm/i915: Short-circuit no-op vga_set_state()Chris Wilson
Touching the VGA registers risks a hard machine hang, at least on this ivb machine after removing a conflicting efifb. This is more than likely related to the discovery that VGA IO decode on the more recent PCH platforms is terminally broken. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-12drm/i915: Propagate PCI read/write errors during vga_set_state()Chris Wilson
This has very little effect other than log the errors in case of failure, and we then hope for the best. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-12drm/i915: alloc intel_fb in the intel_fbdev structJesse Barnes
Allocate this struct instead, so we can re-use another allocated elsewhere if needed. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: WARN_ON if there's no backing storage attached to an fb, that's a bug.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-12drm/i915: Consolidate FUSE_STRAP in one set of definesDamien Lespiau
We had 2 set of defines for the same register, so make it one. Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-12drm/i915: Move num_plane to the intel_device_info structureDamien Lespiau
And rename it to num_sprites as this value doesn't count the primary plane. This limit lives with num_pipes really, and now that dev_priv->info is writable we can put it there instead. While at it, introduce a intel_device_info_runtime_init() where we'll be able to gather the device info fields at run-time. v2: rename num_plane to num_sprites (Ville Syrjälä) v3: rebase on top of latest drm-nightly Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> (for v2) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (for v2) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-12drm/i915: Always use INTEL_INFO() to access the device_info structureDamien Lespiau
If we make sure that all the dev_priv->info usages are wrapped by INTEL_INFO(), we can easily modify the ->info field to be structure and not a pointer while keeping the const protection in the INTEL_INFO() macro. v2: Rebased onto latest drm-nightly Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-11drm/i915: Prevent MI_DISPLAY_FLIP straddling two cachelines on IVBVille Syrjälä
According to BSpec the entire MI_DISPLAY_FLIP packet must be contained in a single cacheline. Make sure that happens. v2: Use intel_ring_begin_cacheline_safe() v3: Use intel_ring_cacheline_align() (Chris) Cc: Bjoern C <lkml@call-home.ch> Cc: Alexandru DAMIAN <alexandru.damian@intel.com> Cc: Enrico Tagliavini <enrico.tagliavini@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74053 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-30Merge remote-tracking branch 'airlied/drm-next' into drm-intel-next-queuedDaniel Vetter
Backmerge drm-next - I need to backmerge drm-intel-fixes patches touching the error capture code to be able to merge Ben's cleanup patches. Conflicts: drivers/gpu/drm/i915/i915_gpu_error.c Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-29Merge tag 'drm/for-3.14-rc1-20140123' of ↵Dave Airlie
git://anongit.freedesktop.org/tegra/linux into drm-next drm/tegra: Changes for v3.14-rc1 (update) These patches fix some issues caused by the DRM panel support from the previous pull request and add two more panels (for the Toshiba AC100 as well as the Seaboard and Ventana). * tag 'drm/for-3.14-rc1-20140123' of git://anongit.freedesktop.org/tegra/linux: drm/tegra: Obtain head number from DT drm/panel: update EDID BLOB in panel_simple_get_modes() gpu: host1x: Remove unnecessary include drm/tegra: Use proper data type drm/tegra: Clarify how panel modes override others drm/tegra: Fix possible CRTC mask for RGB outputs drm/i915: Use drm_encoder_crtc_ok() drm: Move drm_encoder_crtc_ok() to core drm: provide a helper for the encoder possible_crtcs mask drm/tegra: Don't check resource with devm_ioremap_resource() drm/panel: Add support for Chunghwa CLAA101WA01A panel drm/panel: Add support for Samsung LTN101NT05 panel
2014-01-27drm/i915: move module parameters into a struct, in a new fileJani Nikula
With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-27drm/i915: We implement WaEnableVGAAccessThroughIOPort:ctg, elk, ilk, snb, ↵Ville Syrjälä
ivb, vlv, hsw Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-25drm/i915: Limit FIFO underrun reports on GMCH platformsVille Syrjälä
Currently we print all pipe underruns on GMCH platforms. Hook up the same logic we use on PCH platforms where we disable the underrun reporting after the first underrun. Underruns don't actually generate interrupts themselves on GMCH platforms, we just can detect them whenever we service other interrupts. So we don't have any enable bits to worry about. We just need to remember to clear the underrun status when enabling underrun reporting. Note that the underrun handling needs to be moved to the non-locked pipe_stats[] loop in the interrupt handlers to avoid having to rework the locking in intel_set_cpu_fifo_underrun_reporting(). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-24drm/i915: always check clocks when comparing pipe configsJesse Barnes
Now that we have DDI support, we can check these all the time. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-24drm/i915: quirk invert brightness for Acer Aspire 5336Jani Nikula
Since commit ee1452d7458451a7508e0663553ce88d63958157 Author: Jani Nikula <jani.nikula@intel.com> Date: Fri Sep 20 15:05:30 2013 +0300 drm/i915: assume all GM45 Acer laptops use inverted backlight PWM failed and was later reverted in commit be505f643925e257087247b996cd8ece787c12af Author: Alexander van Heukelum <heukelum@fastmail.fm> Date: Sat Dec 28 21:00:39 2013 +0100 Revert "drm/i915: assume all GM45 Acer laptops use inverted backlight PWM" fix the individual broken machine instead. Note to backporters: http://patchwork.freedesktop.org/patch/17837/ is the patch you want for 3.13 and older. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=54171 Reference: http://mid.gmane.org/DUB115-W7628C7C710EA51AA110CD4A5000@phx.gbl CC: stable@vger.kernel.org Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [danvet: Patch mangling for 3.14 plus adding the link to the original for 3.13.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-24drm/i915: Shuffle modeset reset handling aroundDaniel Vetter
Currently we're doing the reset handling a bit late, and we're doing it both in the driver load code and on resume. This makes it unusable for e.g. resetting the panel power sequence state like Paulo wants to. Instead of adding yet another single-use callback shuffle things around: - Output handling code is responsible to reset/init all state on its own at driver load time. - We call the reset functions much earlier, before we start using any of the modeset code. Compared to Paulo's new ->resume callback the only difference in placement is that ->reset is still called without dev->struct_mutex held. Which is imo a feature. v2: Rebase on top of the now merge dinq. Cc: Paulo Zanoni <przanoni@gmail.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-24drm/i915: Fix new_config and new_enabled for load detectVille Syrjälä
I forgot to set new_config and new_enabled appropriately in the load detect code. Fix it up. v2: Handle the other error path in intel_get_load_detect_pipe() too (Imre) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-24drm/i915: Set crtc->new_config to NULL for pipes that are about to be disabledVille Syrjälä
crtc->new_config is only relevant for pipes that are going to be active post-modeset. Set the pointer to NULL for all pipes that are going to be disabled. This is done to help catch bugs where some piece of code would go looking at crtc->new_config even if the data there is stale. v2: Clear new_config in disable_crtc_nofb() too (Imre) Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2025-08-18 02:03:35 +0000