aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/exynos
AgeCommit message (Collapse)Author
2013-03-20drm/exynos: Check g2d cmd list for g2d restrictionsYoungJun Cho
This patch checks command list from user for g2d restrictions. For now, g2d driver wasn't considered for G2D hardware restrictions properly. The below is the restrictions to G2D hardware and this patch considers them. - width or height value in the command list has to be in valid range (1 to 8000 pixels) - The requested area should be less than buffer size. - right has to be bigger than left. - bottom has to be bigger than top. Changelog v2: - Fix merge conflict. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2013-03-20drm/exynos: Add a new function to get gem buffer sizeInki Dae
This patch adds a new function to get gem buffer size. And this funtion could be used for g2d driver or others can get gem buffer size to check if the buffer is valid or not. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <inki.dae@samsung.com>
2013-03-20drm/exynos: Deal with g2d buffer info more efficientlyYoungJun Cho
This patch adds g2d_buf_info structure and buffer relevant variables moves into the g2d_buf_info to manage g2d buffer information more efficiently. Changelog v2: - Fix merge conflict. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2013-03-20drm/exynos: Clean up some G2D codes for readabilityYoungJun Cho
This patch just cleans up G2D codes for readability. For this, it changes the member of g2d_cmdlist_node, obj_type into buf_type. Changelog v2: - Revert irrelevant codes. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2013-03-20drm/exynos: Fix G2D core malfunctioning issueYoungJun Cho
This patch fixes G2D core malfunctioning issue once g2d dma is started. Without 'DMA_HOLD_CMD_REG' register setting, there is only one interrupt after the execution to all command lists have been completed. And that induces watchdog. So this patch sets 'LIST_HOLD' command to the register so that command execution interrupt can be occured whenever each command list execution is finished. Changelog v2: - Consider for interrupt setup to each command list and all command lists And correct typo. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2013-03-20drm/exynos: clear node object type at gem unmapYoungJun Cho
This patch clears node object type in G2D unmap cmdlist. The obj_type of cmdlist node has to be cleared in g2d_unmap_cmdlist_gem() so that the node can be reused in g2d_map_cmdlist_gem(). Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2013-03-20drm/exynos: Fix error routine to getting dma addr.YoungJun Cho
This patch fixes error routine when g2d_userptr_get_dma_add is failed. When sg_alloc_table_from_pages() is failed, it doesn't call sg_free_table() anymore. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2013-03-20drm/exynos: Replaced kzalloc & memcpy with kmemdupAlexandru Gheorghiu
Replaced calls to kzalloc followed by memcpy with call to kmemdup. Patch found using coccinelle. Signed-off-by: Alexandru Gheorghiu <gheorghiuandru@gmail.com> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-03-20drm/exynos: fimd: calculate the correct address offsetLeela Krishna Amudala
Calculate the correct address offset values for alpha and color key control registers based on exynos4 and exynos5 user manuals. Also remove VIDOSD_C_SIZE_W0 macro and fix comments about registers for size and alpha. Signed-off-by: Leela Krishna Amudala <l.krishna@samsung.com> Acked-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-03-20drm/exynos: Make mixer_check_timing staticSachin Kamat
Fixes the following sparse warning: drivers/gpu/drm/exynos/exynos_mixer.c:821:5: warning: symbol 'mixer_check_timing' was not declared. Should it be static? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-03-20drm/exynos: modify the compatible string for exynos fimdVikas Sajjan
modified compatible string for exynos4 fimd as "exynos4210-fimd" and exynos5 fimd as "exynos5250-fimd" to stick to the rule that compatible value should be named after first specific SoC model in which this particular IP version was included as discussed at https://patchwork.kernel.org/patch/2144861/ Signed-off-by: Vikas Sajjan <vikas.sajjan@linaro.org> Acked-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-02-27drm/exynos: convert to idr_alloc()Tejun Heo
Convert to the much saner new idr interface. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: David Airlie <airlied@linux.ie> Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27drm: don't use idr_remove_all()Tejun Heo
idr_destroy() can destroy idr by itself and idr_remove_all() is being deprecated. Drop its usage. * drm_ctxbitmap_cleanup() was calling idr_remove_all() but forgetting idr_destroy() thus leaking all buffered free idr_layers. Replace it with idr_destroy(). Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: David Airlie <airlied@linux.ie> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-25Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm merge from Dave Airlie: "Highlights: - TI LCD controller KMS driver - TI OMAP KMS driver merged from staging - drop gma500 stub driver - the fbcon locking fixes - the vgacon dirty like zebra fix. - open firmware videomode and hdmi common code helpers - major locking rework for kms object handling - pageflip/cursor won't block on polling anymore! - fbcon helper and prime helper cleanups - i915: all over the map, haswell power well enhancements, valleyview macro horrors cleaned up, killing lots of legacy GTT code, - radeon: CS ioctl unification, deprecated UMS support, gpu reset rework, VM fixes - nouveau: reworked thermal code, external dp/tmds encoder support (anx9805), fences sleep instead of polling, - exynos: all over the driver fixes." Lovely conflict in radeon/evergreen_cs.c between commit de0babd60d8d ("drm/radeon: enforce use of radeon_get_ib_value when reading user cmd") and the new changes that modified that evergreen_dma_cs_parse() function. * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (508 commits) drm/tilcdc: only build on arm drm/i915: Revert hdmi HDP pin checks drm/tegra: Add list of framebuffers to debugfs drm/tegra: Fix color expansion drm/tegra: Split DC_CMD_STATE_CONTROL register write drm/tegra: Implement page-flipping support drm/tegra: Implement VBLANK support drm/tegra: Implement .mode_set_base() drm/tegra: Add plane support drm/tegra: Remove bogus tegra_framebuffer structure drm: Add consistency check for page-flipping drm/radeon: Use generic HDMI infoframe helpers drm/tegra: Use generic HDMI infoframe helpers drm: Add EDID helper documentation drm: Add HDMI infoframe helpers video: Add generic HDMI infoframe helpers drm: Add some missing forward declarations drm: Move mode tables to drm_edid.c drm: Remove duplicate drm_mode_cea_vic() gma500: Fix n, m1 and m2 clock limits for sdvo and lvds ...
2013-02-21Merge tag 'driver-core-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg Kroah-Hartman: "Here is the big driver core merge for 3.9-rc1 There are two major series here, both of which touch lots of drivers all over the kernel, and will cause you some merge conflicts: - add a new function called devm_ioremap_resource() to properly be able to check return values. - remove CONFIG_EXPERIMENTAL Other than those patches, there's not much here, some minor fixes and updates" Fix up trivial conflicts * tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits) base: memory: fix soft/hard_offline_page permissions drivercore: Fix ordering between deferred_probe and exiting initcalls backlight: fix class_find_device() arguments TTY: mark tty_get_device call with the proper const values driver-core: constify data for class_find_device() firmware: Ignore abort check when no user-helper is used firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER firmware: Make user-mode helper optional firmware: Refactoring for splitting user-mode helper code Driver core: treat unregistered bus_types as having no devices watchdog: Convert to devm_ioremap_resource() thermal: Convert to devm_ioremap_resource() spi: Convert to devm_ioremap_resource() power: Convert to devm_ioremap_resource() mtd: Convert to devm_ioremap_resource() mmc: Convert to devm_ioremap_resource() mfd: Convert to devm_ioremap_resource() media: Convert to devm_ioremap_resource() iommu: Convert to devm_ioremap_resource() drm: Convert to devm_ioremap_resource() ...
2013-02-21drm/exynos: Add device tree based discovery support for G2DAjay Kumar
This patch adds device tree match table for Exynos G2D controller. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-02-21drm/exynos: hdmi: support extra resolutions using drm_display_mode timingsSean Paul
This patch programs the core and timing generator registers using the timing data provided in drm_display_mode and not using hard-coded configurations. Additional PHY configs has been added. This allows us to support more permissible resolutions and refresh rates. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Shirish S <s.shirish@samsung.com> Signed-off-by: Akshay Saraswat <Akshay.s@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-02-21drm/exynos: mixer: set correct mode for range of resolutionsRahul Sharma
With this patch, mixer driver find the correct resolution mode for the range of resolutions, upto 1080 vertical lines. Resolution will be categorized to NTSC SD, PAL SD or HD and the correct mode is set to the mixer configuration register. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-02-21drm/exynos: implement display-mode-check callback in mixer driverRahul Sharma
This patch adds the implementation of check_timing callback in the mixer driver. Based on the mixer version, correct set of restrictions will be exposed by the mixer driver. A resolution will be acceptable only if passes the criteria set by mixer and hdmi IPs. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-02-21drm/exynos: add display-mode-check operation to exynos_mixer_ops structRahul Sharma
This patch adds the display mode check operation to exynos_mixer_ops in drm-common-hdmi. In Exynos SoCs, mixer IP can put certain restrictions on the proposed display modes. These restriction needs to be considered during mode negotiation, which happens immediately after edid parsing. Both, mixer check-mode and hdmi check-timing callbacks are called one after another and ANDed result is returned back. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-02-21drm/exynos: release resources properly when fb creation is failed.YoungJun Cho
This patch releases allocated resources properly when exynos_user_fb_create() is failed. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2013-02-21drm/exynos: fix wrong pointer access at vm close.YoungJun Cho
This patch fixes wrong pointer access issue to filp->f_op and filp->private_data. The exynos_drm_gem_mmap_ioctl() changes filp->f_op and filp->private_data temporarily and restore them to use original ones in exynos_drm_gem_mmap_buffer() but there was no lock between the changing and the restoring so wrong pointer access to filp->f_op and filp->private_data was induced by vm close callback. So this patch uses mutex lock properly to resolve this issue. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2013-02-21drm/exynos: Add missing braces around sizeofSachin Kamat
Fixes the following checkpatch warning: WARNING: sizeof *sgt should be sizeof(*sgt) Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-02-21drm/exynos: consider exception case to fb handle creationInki Dae
GETFB ioctl request creates a new handle to only one gem object so it should check if the given fb has one gem object. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2013-02-21drm/exynos: fix iommu address allocation orderInki Dae
This patch modifies iommu address allocation order from 64k to 4k. 64k order causes waste of the io space and this was our mistakes. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2013-02-14drm/<drivers>: simplify ->fb_probe callbackDaniel Vetter
The fb helper lost its support for reallocating an fb completely, so no need to return special success values any more. Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-02-14drm/fb-helper: don't disable everything in initial_configDaniel Vetter
This should be done in the drivers for two reasons: - it gets in the way of fastboot efforts - it links the fb helpers with the crtc helpers instead of going through the real interface vfuncs, forcing i915 to fake all the ->disable callbacks used by the crtc helper to avoid ugly Oopsen v2: Resolve conflicts since drivers still call drm_fb_helper_single_add_all_connectors. Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-02-14drm: review locking for drm_fb_helper_restore_fbdev_modeDaniel Vetter
... it's required. Fix up exynos and the cma helper, and add a corresponding WARN_ON to drm_fb_helper_restore_fbdev_mode. Note that tegra calls the fbdev cma helper restore function also from it's driver-load callback. Which is a bit against current practice, since usually the call is only from ->lastclose, and initial setup is done by drm_fb_helper_initial_config. Also add the relevant drm DocBook entry. v2: Add promised WARN to restore_fbdev_mode. Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-02-08Merge branch 'fbcon-locking-fixes' of ↵Dave Airlie
ssh://people.freedesktop.org/~airlied/linux into drm-next This pulls in most of Linus tree up to -rc6, this fixes the worst lockdep reported issues and re-enables fbcon lockdep. (not the fbcon maintainer) * 'fbcon-locking-fixes' of ssh://people.freedesktop.org/~airlied/linux: (529 commits) Revert "Revert "console: implement lockdep support for console_lock"" fbcon: fix locking harder fb: Yet another band-aid for fixing lockdep mess fb: rework locking to fix lock ordering on takeover
2013-01-25drm: Convert to devm_ioremap_resource()Thierry Reding
Convert all uses of devm_request_and_ioremap() to the newly introduced devm_ioremap_resource() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages so all explicit error messages can be removed from the failure code paths. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Cc: David Airlie <airlied@linux.ie> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-25drm/exynos: add check for the device power statusShirish S
V2: Add mutex protection, while read. The hdmi and mixer win_commit calls currently are not checking the status of IP before updating the respective registers, this patch adds this check. Signed-off-by: Shirish S <s.shirish@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-01-25drm/exynos: Make 'drm_hdmi_get_edid' staticSachin Kamat
Fixes the following warning: drivers/gpu/drm/exynos/exynos_drm_hdmi.c:111:13: warning: symbol 'drm_hdmi_get_edid' was not declared. Should it be static? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-01-25drm/exynos: fimd and ipp are broken on multiplatformArnd Bergmann
While the exynos DRM support in principle can work on multiplatform, the FIMD and IPP sections of it both include the plat/map-base.h header file, which is not available on multiplatform. Rather than disabling the entire driver, we can just conditionally build these two parts. Without this patch, building allyesconfig results in: drivers/gpu/drm/exynos/exynos_drm_fimc.c:19:27: fatal error: plat/map-base.h: No such file or directory drivers/gpu/drm/exynos/exynos_drm_ipp.c:20:27: fatal error: plat/map-base.h: No such file or directory Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2013-01-25drm/exynos: don't include plat/gpio-cfg.hArnd Bergmann
Patch 9eb3e9e6f3 "drm/exynos: add support for ARCH_MULTIPLATFORM" allowed building the exynos hdmi driver on non-samsung platforms, which unfortunately broke compilation in combination with 22c4f42897 "drm: exynos: hdmi: add support for exynos5 hdmi", which added an inclusion of the samsung-specific plat/gpio-cfg.h header file. Fortunately, that header file is not required any more here, so we can simply revert the inclusion in order to build the ARM allyesconfig again without getting this error: drivers/gpu/drm/exynos/exynos_hdmi.c:37:27: fatal error: plat/gpio-cfg.h: No such file or directory Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2013-01-25drm/exynos: Remove "internal" interrupt handlingSean Paul
Remove the "internal" interrupt handling since it's never invoked and remove "external" reference. This patch removes a bunch of dead code and clarifies how hotplugging is handled in the HDMI driver. Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-01-25drm/exynos: Add missing static specifiers in exynos_drm_rotator.cSachin Kamat
Fixes the following warnings: drivers/gpu/drm/exynos/exynos_drm_rotator.c:737:24: warning: symbol 'rot_limit_tbl' was not declared. Should it be static? drivers/gpu/drm/exynos/exynos_drm_rotator.c:754:27: warning: symbol 'rotator_driver_ids' was not declared. Should it be static? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-01-25drm/exynos: Replace mdelay with usleep_rangeSean Paul
Replace the unnecessary atomic mdelay calls with usleep_range calls. Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-01-25drm/exynos: Make ipp_handle_cmd_work staticSachin Kamat
Fixes the following warning: drivers/gpu/drm/exynos/exynos_drm_ipp.c:872:6: warning: symbol 'ipp_handle_cmd_work' was not declared. Should it be static? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-01-25drm/exynos: Make g2d_userptr_get_dma_addr staticSachin Kamat
Fixes the following warning: drivers/gpu/drm/exynos/exynos_drm_g2d.c:327:12: warning: symbol 'g2d_userptr_get_dma_addr' was not declared. Should it be static? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-01-25drm/exynos: consider DMA_NONE flag to dmabuf importInki Dae
This patch considers DMA_NONE flag for other drivers not using dma mapping framework with iommu such as 3d gpu driver or others. For example, there might be 3d gpu driver that has its own iommu hw unit and iommu table mapping mechnism. So in this case, the dmabuf buffer imported into this driver needs just only sg table to map the buffer with its own iommu table itself. So this patch makes dma_buf_map_attachment ignore dma_map_sg call and just return sg table containing pages if dma_data_direction is DMA_NONE. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2013-01-25drm/exynos: free sg object if dma_map_sg is failedInki Dae
This patch releases sgt's sg object allocated by sgt_alloc_table correctly. When exynos_gem_map_dma_buf was called by dma_buf_map_attachmemt(), the sgt's sg object was allocated by sg_alloc_tale() so if dma_map_sg() is failed, the sg object should be released. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2013-01-25drm/exynos: added validation of edid for vidi connectionSeung-Woo Kim
If edid of vidi from user is invalid, size calculated from a number of cea extensions can be wrong. So, validation should be checked. Changelog v2: - just code cleanup . declare raw_edid only if vidi->connection is enabled. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-01-25drm/exynos: let drm handle edid allocationsRahul Sharma
There's no need to allocate edid twice and do a memcpy when drm helpers exist to do just that. This patch cleans that interaction up, and doesn't keep the edid hanging around in the connector. v4: - removed error check for drm_mode_connector_update_edid_property which is expected to fail for Virtual Connectors like VIDI. Thanks to Seung-Woo Kim. v3: - removed MAX_EDID as it is not used anymore. v2: - changed vidi_get_edid callback inside vidi driver. Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-01-20drm: revamp framebuffer cleanup interfacesDaniel Vetter
We have two classes of framebuffer - Created by the driver (atm only for fbdev), and the driver holds onto the last reference count until destruction. - Created by userspace and associated with a given fd. These framebuffers will be reaped when their assoiciated fb is closed. Now these two cases are set up differently, the framebuffers are on different lists and hence destruction needs to clean up different things. Also, for userspace framebuffers we remove them from any current usage, whereas for internal framebuffers it is assumed that the driver has done this already. Long story short, we need two different ways to cleanup such drivers. Three functions are involved in total: - drm_framebuffer_remove: Convenience function which removes the fb from all active usage and then drops the passed-in reference. - drm_framebuffer_unregister_private: Will remove driver-private framebuffers from relevant lists and drop the corresponding references. Should be called for driver-private framebuffers before dropping the last reference (or like for a lot of the drivers where the fbdev is embedded someplace else, before doing the cleanup manually). - drm_framebuffer_cleanup: Final cleanup for both classes of fbs, should be called by the driver's ->destroy callback once the last reference is gone. This patch just rolls out the new interfaces and updates all drivers (by adding calls to drm_framebuffer_unregister_private at all the right places)- no functional changes yet. Follow-on patches will move drm core code around and update the lifetime management for framebuffers, so that we are no longer required to keep framebuffers alive by locking mode_config.mutex. I've also updated the kerneldoc already. vmwgfx seems to again be a bit special, at least I haven't figured out how the fbdev support in that driver works. It smells like it's external though. v2: The i915 driver creates another private framebuffer in the load-detect code. Adjust its cleanup code, too. Reviewed-by: Rob Clark <rob@ti.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-08Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm update from Dave Airlie: "Exynos and Radeon mostly, with a dma-buf and ttm fix thrown in. It's a bit big but its mostly exynos license fix ups and I'd rather not hold those up since its legally stuff. Radeon has a couple of fixes from dma engine work, TTM is just a locking fix, and dma-buf fix has been hanging around and I finally got a chance to review it." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (30 commits) drm/ttm: fix fence locking in ttm_buffer_object_transfer drm/prime: drop reference on imported dma-buf come from gem drm/radeon: add quirk for d3 delay during switcheroo poweron for apple macbooks drm/exynos: move finish page flip to a common place drm/exynos: fimd: modify condition in fimd resume drm/radeon: fix DMA CS parser for r6xx linear copy packet drm/radeon: split r6xx and r7xx copy_dma functions drm/exynos: Use devm_clk_get in exynos_drm_gsc.c drm/exynos: Remove redundant NULL check in exynos_drm_gsc.c drm/exynos: Remove explicit freeing using devm_* APIs in exynos_drm_gsc.c drm/exynos: Use devm_clk_get in exynos_drm_rotator.c drm/exynos: Remove redundant NULL check in exynos_drm_rotator.c drm/exynos: Remove unnecessary devm_* freeing APIs in exynos_drm_rotator.c drm/exynos: Use devm_clk_get in exynos_drm_fimc.c drm/exynos: Remove redundant NULL check drm/exynos: Remove explicit freeing using devm_* APIs in exynos_drm_fimc.c drm/exynos: Use devm_kzalloc in exynos_drm_ipp.c drm/exynos: fix gem buffer allocation type checking drm/exynos: remove needless parenthesis. drm/exynos: fix incorrect interrupt induced by m2m operation. ...
2013-01-08drm/prime: drop reference on imported dma-buf come from gemSeung-Woo Kim
Increasing ref counts of both dma-buf and gem for imported dma-buf come from gem makes memory leak. release function of dma-buf cannot be called because f_count of dma-buf increased by importing gem and gem ref count cannot be decrease because of exported dma-buf. So I add dma_buf_put() for imported gem come from its own gem into each drivers having prime_import and prime_export capabilities. With this, only gem ref count is increased if importing gem exported from gem of same driver. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Kyungmin.park <kyungmin.park@samsung.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Rob Clark <rob.clark@linaro.org> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-01-07drm/exynos: move finish page flip to a common placeRahul Sharma
This patch implements the exynos_drm_crtc_finish_pageflip in exynos_drm_crtc.c. This avoids the duplication of same code in mixer, fimd and vidi. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Signed-off-by: Stephane Marchesin <marcheu@chromium.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-01-07drm/exynos: fimd: modify condition in fimd resumePrathyush K
If fimd is runtime suspended (by DPMS OFF), fimd_suspend does not call fimd_activate(false) and just returns. Similarily the check in fimd_resume should not resume if previously runtime_suspended. Instead the existing check does the opposite. So if fimd was not runtime suspended, suspend will turn off fimd but resume will not turn it on. This patch fixes this issue by reversing the condition. Signed-off-by: Prathyush K <prathyush.k@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-01-04drm/exynos: Use devm_clk_get in exynos_drm_gsc.cSachin Kamat
This eliminates the need for explicit clk_put and makes the cleanup and exit path code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-01-04drm/exynos: Remove redundant NULL check in exynos_drm_gsc.cSachin Kamat
devm_request_and_ioremap API checks for NULL. Hence explicit NULL check is not necessary. Saves some code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>