aboutsummaryrefslogtreecommitdiff
path: root/drivers/dma
AgeCommit message (Collapse)Author
2010-10-13ioat2: fix performance regressionDan Williams
Commit 0793448 "DMAENGINE: generic channel status v2" changed the interface for how dma channel progress is retrieved. It inadvertently exported an internal helper function ioat_tx_status() instead of ioat_dma_tx_status(). The latter polls the hardware to get the latest completion state, while the helper just evaluates the current state without touching hardware. The effect is that we end up waiting for completion timeouts or descriptor allocation errors before the completion state is updated. iperf (before fix): [SUM] 0.0-41.3 sec 364 MBytes 73.9 Mbits/sec iperf (after fix): [SUM] 0.0- 4.5 sec 499 MBytes 940 Mbits/sec This is a regression starting with 2.6.35. Cc: <stable@kernel.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Maciej Sosnowski <maciej.sosnowski@intel.com> Reported-by: Richard Scobie <richard@sauce.co.nz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-23dmaengine: fix interrupt clearing for mv_xorSimon Guinot
When using simultaneously the two DMA channels on a same engine, some transfers are never completed. For example, an endless lock can occur while writing heavily on a RAID5 array (with async-tx offload support enabled). Note that this issue can also be reproduced by using the DMA test client. On a same engine, the interrupt cause register is shared between two DMA channels. This patch make sure that the cause bit is only cleared for the requested channel. Signed-off-by: Simon Guinot <sguinot@lacie.com> Tested-by: Luc Saillard <luc@saillard.org> Acked-by: saeed bishara <saeed.bishara@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-22dma/shdma: move dereference below the NULL checkDan Carpenter
"param" can be NULL here, so only dereference it after the check. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-08-12Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: mmc_spi: Fix unterminated of_match_table of/sparc: fix build regression from of_device changes of/device: Replace struct of_device with struct platform_device
2010-08-10Merge branches 'master' and 'devel' into for-linusRussell King
Conflicts: arch/arm/Kconfig arch/arm/mm/Kconfig
2010-08-09Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (30 commits) DMAENGINE: at_hdmac: locking fixlet DMAENGINE: pch_dma: kill another usage of __raw_{read|write}l dma: dmatest: fix potential sign bug ioat2: catch and recover from broken vtd configurations v6 DMAENGINE: add runtime slave control to COH 901 318 v3 DMAENGINE: add runtime slave config to DMA40 v3 DMAENGINE: generic slave channel control v3 dmaengine: Driver for Topcliff PCH DMA controller intel_mid: Add Mrst & Mfld DMA Drivers drivers/dma: Eliminate a NULL pointer dereference dma/timb_dma: compile warning on 32 bit DMAENGINE: ste_dma40: support older silicon DMAENGINE: ste_dma40: support disabling physical channels DMAENGINE: ste_dma40: no disabled phy channels on ux500 DMAENGINE: ste_dma40: fix suspend bug DMAENGINE: ste_dma40: add DB8500 memcpy channels DMAENGINE: ste_dma40: no flow control on memcpy DMAENGINE: ste_dma40: arch updates for LCLA and LCPA DMAENGINE: ste_dma40: allocate LCLA dynamically DMAENGINE: ste_dma40: no premature stop ... Fix up trivial conflicts in arch/arm/mach-ux500/devices-db8500.c
2010-08-06Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/genesis-2.6 into ↵Russell King
devel-stable Conflicts: drivers/net/irda/sh_irda.c
2010-08-06of/device: Replace struct of_device with struct platform_deviceGrant Likely
of_device is just an alias for platform_device, so remove it entirely. Also replace to_of_device() with to_platform_device() and update comment blocks. This patch was initially generated from the following semantic patch, and then edited by hand to pick up the bits that coccinelle didn't catch. @@ @@ -struct of_device +struct platform_device Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: David S. Miller <davem@davemloft.net>
2010-08-04DMAENGINE: at_hdmac: locking fixletYong Wang
atc_chain_complete shall be called with atchan->lock held and bh disabled. Signed-off-by: Yong Wang <yong.y.wang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-08-04DMAENGINE: pch_dma: kill another usage of __raw_{read|write}lYong Wang
Use {read|write}l instead of __raw_{read|write}l since PCH DMA controller is PCI device. Signed-off-by: Yong Wang <yong.y.wang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-08-04dma: dmatest: fix potential sign bugKulikov Vasiliy
'cnt' is unsigned, so this code may become wrong in future as dmatest_add_threads() can return error code: cnt = dmatest_add_threads(dtc, DMA_MEMCPY); thread_count += cnt > 0 ? cnt : 0; ^^^^^^^ Now it can return only -EINVAL if and only if second argument of dmatest_add_threads() is not one of DMA_MEMCPY, DMA_XOR, DMA_PQ. So, now it is not wrong but may become wrong in future. The semantic patch that finds this problem (many false-positive results): (http://coccinelle.lip6.fr/) // <smpl> @ r1 @ identifier f; @@ int f(...) { ... } @@ identifier r1.f; type T; unsigned T x; @@ *x = f(...) ... *x > 0 Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-08-04ioat2: catch and recover from broken vtd configurations v6Dan Williams
On some platforms (MacPro3,1) the BIOS assigns the ioatdma device to the incorrect iommu causing faults when the driver initializes. Add a quirk to catch this misconfiguration and try falling back to untranslated operation (which works in the MacPro3,1 case). Assuming there are other platforms with misconfigured iommus teach the ioatdma driver to treat initialization failures as non-fatal (just fail the driver load and emit a warning instead of triggering a BUG_ON). This can be classified as a boot regression since 2.6.32 on affected platforms since the ioatdma module did not autoload prior to that kernel. Cc: <stable@kernel.org> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Reported-by: Chris Li <lkml@chrisli.org> Tested-by: Chris Li <lkml@chrisli.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-08-04DMAENGINE: add runtime slave control to COH 901 318 v3Linus Walleij
This extends the DMA engine driver for the COH 901 318 used in the U300 platform with the generic runtime slave control command. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-08-04DMAENGINE: add runtime slave config to DMA40 v3Linus Walleij
This extends the DMA engine driver for the DMA40 used in the U8500 platform with the generic runtime slave configuration interface. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-08-04dmaengine: Driver for Topcliff PCH DMA controllerYong Wang
Topcliff PCH is the platform controller hub that is going to be used in Intel's upcoming general embedded platforms. This adds the driver for Topcliff PCH DMA controller. The DMA channels are strictly for device to host or host to device transfers and cannot be used for generic memcpy. Signed-off-by: Yong Wang <yong.y.wang@intel.com> [kill GFP_ATOMIC, kill __raw_{read|write}l, locking fixlet] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-08-04Merge branch 'master' into for-nextJiri Kosina
2010-08-04Fix spelling contorller -> controller in commentsStefan Weil
Cc: Jiri Kosina <trivial@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-07-27intel_mid: Add Mrst & Mfld DMA DriversVinod Koul
This patch add DMA drivers for DMA controllers in Langwell chipset of Intel(R) Moorestown platform and DMA controllers in Penwell of Intel(R) Medfield platfrom This patch adds support for Moorestown DMAC1 and DMAC2 controllers. It also add support for Medfiled GP DMA and DMAC1 controllers. These controllers supports memory to peripheral and peripheral to memory transfers. It support only single block transfers. This driver is based on Kernel DMA engine Anyone who wishes to use this controller should use DMA engine APIs This controller exposes DMA_SLAVE capabilities and notifies the client drivers of DMA transaction completion Config option required to be enabled CONFIG_INTEL_MID_DMAC=y Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-07-05Merge branch 'master' of ↵Paul Mundt
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: include/linux/serial_sci.h Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-07-02of/dma: fix build breakage in ppc4xx adma driverDan Williams
Convert ppc4xx adma driver to use new node pointer location Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-07-01Merge branch 'timb' into dmaengineDan Williams
2010-07-01drivers/dma: Eliminate a NULL pointer dereferenceJulia Lawall
If td_desc is NULL, just skip both kfrees. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression E,E1; identifier f; statement S1,S2,S3; @@ if ((E == NULL && ...) || ...) { ... when != if (...) S1 else S2 when != E = E1 * E->f ... when any return ...; } else S3 // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-07-01dma/timb_dma: compile warning on 32 bitDan Carpenter
This silences a compile warning on 32 bit systems: drivers/dma/timb_dma.c:203: warning: cast to pointer from integer of different size Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-06-22DMAENGINE: ste_dma40: support older siliconLinus Walleij
This makes sure the DMA40 driver will also work on the oldest silicon revisions that have the on-chip memory on another location in the DB8500 and also requires explicit suspend before starting or resuming a logical channel. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> [added parenthesis to the definition of U8500_DMA_LCPA_BASE_ED] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-06-22DMAENGINE: ste_dma40: support disabling physical channelsJonas Aaberg
This makes it possible to disable physical channels. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-06-22DMAENGINE: ste_dma40: fix suspend bugJonas Aaberg
This fixes a bug when suspending channels: first make the checks, then suspend the channel, not the other way around. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-06-22DMAENGINE: ste_dma40: allocate LCLA dynamicallyLinus Walleij
Switch to allocating LCLA in memory instead of having a fixed address. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-06-22DMAENGINE: ste_dma40: no premature stopJonas Aaberg
Correct bug that could cause paused channels to stop. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-06-22DMAENGINE: ste_dma40: interrupts only on dstJonas Aaberg
We don't want interrupts when the source is done, only when the destination is done and everything is complete at the recieveing end of a transfer. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-06-22DMAENGINE: ste_dma40: avoid doing unnessecary suspendJonas Aaberg
Avoid doing unnessecary suspend when modifying logical channels. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-06-22DMAENGINE: ste_dma40: lock fixJonas Aaberg
Fix up some locking issues found by enabling lock debugging. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-06-22DMAENGINE: ste_dma40: deny ops on non-alloc channelsJonas Aaberg
Added checks to deny operating on none-allocated channels. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-06-22DMAENGINE: ste_dma40: various cosmetic clean-upsJonas Aaberg
This cleans up some extra newlines, removes some code duplication and moves the code to comply better with checkpatch. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-06-22DMAENGINE: ste_dma40: improve allocation error handlingJonas Aaberg
Better error handling when channel allocation fails. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-06-22DMAENGINE: ste_dma40: use kmem cacheJonas Aaberg
Use kmem cache instead of own cache, reducing code duplication and bug sources. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-06-22DMAENGINE: ste_dma40: moved freeing of client owned descPer Friden
fixed typo and moved freeing of client owned desc to free_dma. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-06-22DMAENGINE: ste_dma40: only write phy channel config first timeLinus Walleij
We only need to write the configuration to a physical channel if it is free, else it is already written. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-06-22DMAENGINE: ste_dma40: fixed lli_max=1 issuePer Friden
Fixed lli_max=1 issue in case of full lcla, currently this case is not properly handled. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-06-16Merge branch 'master' into for-nextJiri Kosina
2010-06-16fix typos concerning "initiali[zs]e"Uwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-06-02of/dma: fix build breakage in ppc4xx adma driverAnatolij Gustschin
Fixes build error caused by the OF device_node pointer being moved into struct device Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-06-02of/dma: mpc512x_dma.c: Fix build failuresAnatolij Gustschin
Fixes build errors caused by the: - OF device_node pointer being moved into struct device - removal of the match_table field from struct of_platform_driver Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-31Merge branch 'master' of ↵Paul Mundt
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
2010-05-30Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: DMAENGINE: DMA40 U8500 platform configuration DMA: PL330: Add dma api driver
2010-05-25kernel-wide: replace USHORT_MAX, SHORT_MAX and SHORT_MIN with USHRT_MAX, ↵Alexey Dobriyan
SHRT_MAX and SHRT_MIN - C99 knows about USHRT_MAX/SHRT_MAX/SHRT_MIN, not USHORT_MAX/SHORT_MAX/SHORT_MIN. - Make SHRT_MIN of type s16, not int, for consistency. [akpm@linux-foundation.org: fix drivers/dma/timb_dma.c] [akpm@linux-foundation.org: fix security/keys/keyring.c] Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (25 commits) sh: fix up sh7785lcr_32bit_defconfig. arch/sh/lib/strlen.S: Checkpatch cleanup sh: fix up sh7786 dmaengine build. sh: guard cookie consistency across termination in the DMA driver sh: prevent the DMA driver from unloading, while in use sh: fix Oops in the serial SCI driver sh: allow platforms to specify SD-card supported voltages mmc: let MFD's provide supported Vdd card voltages to tmio_mmc sh: disable SD-card write-protection detection on kfr2r09 mfd: pass platform flags down to the tmio_mmc driver tmio: add a platform flag to disable card write-protection detection sh: Add SDHI DMA support to migor sh: Add SDHI DMA support to kfr2r09 sh: Add SDHI DMA support to ms7724se sh: Add SDHI DMA support to ecovec mmc: add DMA support to tmio_mmc driver, when used on SuperH sh: prepare the SDHI MFD driver to pass DMA configuration to tmio_mmc.c mmc: prepare tmio_mmc for passing of DMA configuration from the MFD cell sh: add DMA slave definitions to sh7724 sh: add DMA slaves for two SDHI controllers to sh7722 ...
2010-05-23DMA: PL330: Add dma api driverJassi Brar
Add DMA Engine API driver for the PL330 DMAC. This driver is supposed to be reusable by various platforms that have one or more PL330 DMACs. Atm, DMA_SLAVE and DMA_MEMCPY capabilities have been implemented. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Reviewed-by: Linus Walleij <linus.walleij@stericsson.com> [dan.j.williams@intel.com: missing slab.h and ->device_control() fixups] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-05-24Merge branch 'master' of ↵Paul Mundt
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
2010-05-22sh: guard cookie consistency across termination in the DMA driverGuennadi Liakhovetski
If all descriptors on a channel are terminated or the channel is released, update the completed cookie counter to match the last cookie. This prevents inconsistency warning on resumed DMA operation. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-22sh: prevent the DMA driver from unloading, while in useGuennadi Liakhovetski
This prevents the driver from unloading, while it is in use. Unloading of the driver, while its DMA channels are held, leads to a kernel Oops. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-01 05:50:47 +0000