aboutsummaryrefslogtreecommitdiff
path: root/drivers/char/agp/intel-agp.c
AgeCommit message (Collapse)Author
2014-01-29Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm updates from Dave Airlie: "Been a bit busy, first week of kids school, and waiting on other trees to go in before I could send this, so its a bit later than I'd normally like. Highlights: - core: timestamp fixes, lots of misc cleanups - new drivers: bochs virtual vga - vmwgfx: major overhaul for their nextgen virt gpu. - i915: runtime D3 on HSW, watermark fixes, power well work, fbc fixes, bdw is no longer prelim. - nouveau: gk110/208 acceleration, more pm groundwork, old overlay support - radeon: dpm rework and clockgating for CIK, pci config reset, big endian fixes - tegra: panel support and DSI support, build as module, prime. - armada, omap, gma500, rcar, exynos, mgag200, cirrus, ast: fixes - msm: hdmi support for mdp5" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (595 commits) drm/nouveau: resume display if any later suspend bits fail drm/nouveau: fix lock unbalance in nouveau_crtc_page_flip drm/nouveau: implement hooks for needed for drm vblank timestamping support drm/nouveau/disp: add a method to fetch info needed by drm vblank timestamping drm/nv50: fill in crtc mode struct members from crtc_mode_fixup drm/radeon/dce8: workaround for atom BlankCrtc table drm/radeon/DCE4+: clear bios scratch dpms bit (v2) drm/radeon: set si_notify_smc_display_change properly drm/radeon: fix DAC interrupt handling on DCE5+ drm/radeon: clean up active vram sizing drm/radeon: skip async dma init on r6xx drm/radeon/runpm: don't runtime suspend non-PX cards drm/radeon: add ring to fence trace functions drm/radeon: add missing trace point drm/radeon: fix VMID use tracking drm: ast,cirrus,mgag200: use drm_can_sleep drm/gma500: Lock struct_mutex around cursor updates drm/i915: Fix the offset issue for the stolen GEM objects DRM: armada: fix missing DRM_KMS_FB_HELPER select drm/i915: Decouple GPU error reporting from ring initialisation ...
2014-01-06agp: Support 64-bit APBASEBjorn Helgaas
Per the AGP 3.0 spec, APBASE is a standard PCI BAR and may be either 32 bits or 64 bits wide. Many drivers read APBASE directly, but they only handled 32-bit BARs. The PCI core reads APBASE at enumeration-time. Use pci_bus_address() instead of reading it again in the driver. This works correctly for both 32-bit and 64-bit BARs. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-11-14drm/i915: Kill legeacy AGP for gen3 kmsDaniel Vetter
Thus far we've tried to carefully work around the fact that old userspace relied on the AGP-backed legacy buffer mapping ioctls for a bit too long. But it's really horribly, and now some new users for it started to show up again: http://www.mail-archive.com/mesa-dev@lists.freedesktop.org/msg45547.html This uses drmAgpSize to figure out the GTT size, which is both the wrong thing to inquire and also might force us to keep this crap around for another few years. So I want to stop this particular zombie from raising ever again. Now it's only been 4 years since XvMC was fixed for gen3, so a bit early by the usual rules. But since Linus explicitly said that an ABI breakage only counts if someone actually observes it I want to tempt fate an accelarate the demise of AGP. We probably need to wait 2-3 kernel releases with this shipping until we go on a killing spree code-wise. v2: Remove intel_agp_enabled since it's unused (Ville). Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Dave Airlie <airlied@gmail.com> Acked-by: Dave Airlie <airlied@gmail.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-03Drivers: char: remove __dev* attributes.Greg Kroah-Hartman
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: David Airlie <airlied@linux.ie> Cc: Matt Mackall <mpm@selenic.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21char: remove use of __devexitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: David Airlie <airlied@linux.ie> Cc: Olof Johansson <olof@lixom.net> Cc: Mattia Dongili <malattia@linux.it> Cc: Kent Yoder <key@linux.vnet.ibm.com> Cc: Rajiv Andrade <mail@srajiv.net> Cc: Marcel Selhorst <tpmdd@selhorst.net> Cc: Sirrix AG <tpmdd@sirrix.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-arm-kernel@lists.infradead.org Cc: openipmi-developer@lists.sourceforge.net Cc: platform-driver-x86@vger.kernel.org Cc: tpmdd-devel@lists.sourceforge.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-25agp/intel-agp: remove snb+ host bridge pciidsDaniel Vetter
drm/i915 now takes care itself of setting up the gtt for these chips. Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-25Merge tag 'v3.5-rc4' into drm-intel-next-queuedDaniel Vetter
I want to merge the "no more fake agp on gen6+" patches into drm-intel-next (well, the last pieces). But a patch in 3.5-rc4 also adds a new use of dev->agp. Hence the backmarge to sort this out, for otherwise drm-intel-next merged into Linus' tree would conflict in the relevant code, things would compile but nicely OOPS at driver load :( Conflicts in this merge are just simple cases of "both branches changed/added lines at the same place". The only tricky part is to keep the order correct wrt the unwind code in case of errors in intel_ringbuffer.c (and the MI_DISPLAY_FLIP #defines in i915_reg.h together, obviously). Conflicts: drivers/gpu/drm/i915/i915_reg.h drivers/gpu/drm/i915/intel_ringbuffer.c Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-12drm/i915 + agp/intel-gtt: prep work for direct setupDaniel Vetter
To be able to directly set up the intel-gtt code from drm/i915 and avoid setting up the fake-agp driver we need to prepare a few things: - pass both the bridge and gpu pci_dev to the probe function and add code to handle the gpu pdev both being present (for drm/i915) and not present (fake agp). - add refcounting to the remove function so that unloading drm/i915 doesn't kill the fake agp driver v2: Fix up the cleanup and refcount, noticed by Jani Nikula. Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-06char/agp: add another Ironlake host bridgeEugeni Dodonov
This seems to come on Gigabyte H55M-S2V and was discovered through the https://bugs.freedesktop.org/show_bug.cgi?id=50381 debugging. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50381 Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-19drm/i915: hook Haswell devices in placeEugeni Dodonov
This patch enables i915 driver to handle Haswell devices. It should go in last, when things are working stable enough. Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-03-29agp/intel: add ValleyView AGP driverJesse Barnes
... and bind it right to the PCI id. Note that there are still a few things to fix here: - we need to move the tlb flush to a better place in drm/i915. - we need to check snoop support on vlv and implement it. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: squash follow-on patch and add todo items to commit msg.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-01-17agp/intel: Add pci id for hostbridge from has/qemuBen Widawsky
This is needed to run the simulator. Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: added a comment in case people wonder what it's for.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2011-05-13agp/intel: add Ivy Bridge supportJesse Barnes
Just use the Sandy Bridge routines. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-02-04agp: ensure GART has an address before enabling itStephen Kitt
Some BIOSs (eg. the AMI BIOS on the Asus P4P800 motherboard) don't initialise the GART address, and pcibios_assign_resources() can ignore it because it can be marked as a host bridge (see https://bugzilla.kernel.org/show_bug.cgi?id=24392#c5 for details). This was handled correctly up to 2.6.35, but the pci_enable_device() cleanup in 2.6.36 96576a9e1a0cdb8 ("agp: intel-agp: do not use PCI resources before pci_enable_device()") means that the kernel tries to enable the GART before assigning it an address; in such cases the GART overlaps with other device assignments and ends up being disabled. This patch fixes https://bugzilla.kernel.org/show_bug.cgi?id=24392 Note that I imagine efficeon-agp.c probably has the same problem, but I can't test that and I'd like to make sure this patch is suitable for -stable (since 2.6.36 and 2.6.37 are affected). Signed-off-by: Stephen Kitt <steve@sk2.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Maciej Rutecki <maciej.rutecki@gmail.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Kulikov Vasiliy <segooon@gmail.com> Cc: Florian Mickler <florian@mickler.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-14agp/intel: Fix device names of i845 and 845GOswald Buddenhagen
They got mixed up when the switch was converted to a table in 2007. Signed-off-by: Oswald Buddenhagen <ossi@kde.org> [ickle: minor changes for 2.6.37+] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-11-23drm/i915: restore gtt on resume in the drm instead of in intel-gtt.koDaniel Vetter
This still uses the agp functions to actually reinstate the mappings (with a gross hack to make agp cooperate), but it wires everything up correctly for the switchover. The call to agp_rebind_memory can be dropped because all non-kms drivers do all their rebinding on EnterVT. v2: Be more paranoid and flush the chipset cache after restoring gtt mappings. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-10-19agp/intel: Also add B43.1 to list of supported devicesChris Wilson
This was a missing piece from 41a5142 that dropped recognition of the AGP module for the second B43 variant. Reported-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2010-09-08agp/intel: make intel-gtt.c into a real source fileDaniel Vetter
Now that the disentangling is complete, stop including intel-gtt.c from intel-agp.c. The linux build system _really_ doesn't allow .c source files with the same name as the module. It fails with the following message when trying to build such a bugger: make[3]: Circular drivers/char/agp/intel-agp.o <- drivers/char/agp/intel-agp.o dependency dropped. Instead of renameing intel-agp.c I've simply created a new module out of intel-gtt.c. Renaming intel-agp.ko to something else is not an option for it will surely kill someones boot process. This also paves the way to use the gtt code without loading the agp driver. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-08agp/intel: split out gmch/gtt probe, part 2Daniel Vetter
This just splits the device list into two and moves the gtt related stuff to intel-gtt.c. The two new devices lists also lose the not longer needed fields. There where only about 5 cases anyway with both a gmch and a possible agp port, so the duplication of entries is rather small. Additionally kill 2 out of the three Ironlake mobile entries that only differed in host bridge pci id. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-07intel_agp,i915: Add more sandybridge graphics device idsZhenyu Wang
New pci ids for GT2 and GT2+ on desktop and mobile sandybridge, and graphics device ids for server sandybridge. Also rename original ids string to reflect GT1 version. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: stable@kernel.org Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-07agp/intel: Fix cache control for SandybridgeZhenyu Wang
Sandybridge GTT has new cache control bits in PTE, which controls graphics page cache in LLC or LLC/MLC, so we need to extend the mask function to respect the new bits. And set cache control to always LLC only by default on Gen6. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: stable@kernel.org Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-08-21drm/i915,intel_agp: Add support for Sandybridge D0Zhenyu Wang
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-08-21agp/intel: set 40-bit dma mask on SandybridgeZhenyu Wang
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-08-05agp: intel-agp: do not use PCI resources before pci_enable_device()Kulikov Vasiliy
IRQ and resource[] may not have correct values until after PCI hotplug setup occurs at pci_enable_device() time. The semantic match that finds this problem is as follows: // <smpl> @@ identifier x; identifier request ~= "pci_request.*|pci_resource.*"; @@ ( * x->irq | * x->resource | * request(x, ...) ) ... *pci_enable_device(x) // </smpl> Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-01agp/intel: Support the extended physical addressing bits on Sandybridge.Zhenyu Wang
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> [anholt: Split this patch out of a larger patch for Sandybridge fixes] Signed-off-by: Eric Anholt <eric@anholt.net>
2010-04-23agp: use scratch page on memory remove and at GATT creation V4Jerome Glisse
Convert most AGP chipset to use scratch page as default entries. This help avoiding GPU querying 0 address and trigger computer fault. With KMS and memory manager we bind/unbind AGP memory constantly and it seems that some GPU are still doing AGP traffic even after GPU report being idle with the memory segment. Tested (radeon GPU KMS + Xorg + compiz + glxgears + quake3) on : - SIS 1039:0001 & 1039:0003 - Intel 865 8086:2571 Compile tested for other bridges V2 enable scratch page on uninorth V3 fix unbound check in uninorth insert memory (Michel Dänzer) V4 rebase on top of drm-next branch with the lastest intel AGP changeset (stable should use version V3 of the patch) Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Michel Dänzer <michel@daenzer.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-20agp/intel: put back check that we have a driver for the bridge.Dave Airlie
On my 945 laptop + radeon GPU, I was getting an oops on boot without this check which seems to have gotten dropped in the rework. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-20Merge remote branch 'anholt/drm-intel-next' of /home/airlied/kernel/drm-next ↵Dave Airlie
into drm-core-next * 'anholt/drm-intel-next' of /home/airlied/kernel/drm-next: (48 commits) agp/intel-gtt: kill previous_size assignments agp/intel-gtt: kill intel_i830_tlbflush agp/intel: split out gmch/gtt probe, part 1 agp/intel: kill mutli_gmch_chip agp/intel: uncoditionally reconfigure driver on resume agp/intel: split out the GTT support agp/intel: introduce intel-agp.h header file drm/i915: Don't touch PORT_HOTPLUG_EN in intel_dp_detect() drm/i915/pch: Use minimal number of FDI lanes (v2) drm/i915: Add the support of memory self-refresh on Ironlake drm/i915: Move Pineview CxSR and watermark code into update_wm hook. drm/i915: Only save/restore FBC on the platform that supports FBC drm/i915: Fix the incorrect argument for SDVO SET_TV_format command drm/i915: Add support of SDVO on Ibexpeak PCH drm/i915: Don't enable pipe/plane/VCO early (wait for DPMS on). drm/i915: do not read uninitialized ->dev_private Revert "drm/i915: Use a dmi quirk to skip a broken SDVO TV output." drm/i915: implement multifunction SDVO device support drm/i915: remove unused intel_pipe_get_connector() drm/i915: remove connector object in old output structure ...
2010-04-18agp/intel: split out gmch/gtt probe, part 1Daniel Vetter
This is essentially the last piece of code that's tying intel-gtt.c to intel-agp.c. Extract the probe code into it's own function so that it can be moved to intel-gtt.c. This requires some slight changes in the ordering of device probe function. This patch just implements that for better bisectability in case this introduces bugs. The biggest change is that the gmch/gtt code doesn't execute a pci resource fixup anymore. I've dug around in historical git trees, and this change is to support the agp port on an old HP server with the i440 intel chipset. So only needed for the agp driver. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-04-18agp/intel: kill mutli_gmch_chipDaniel Vetter
Always zero, i.e. unused. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-04-18agp/intel: uncoditionally reconfigure driver on resumeDaniel Vetter
Only two drivers were not in this table (7505 and g33), both non-mobile chipsets. So they were most likely just missing. This is another step to untangle the gtt from the agp driver. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-04-18agp/intel: split out the GTT supportDaniel Vetter
intel-agp.c contains actually two different drivers: An agp driver for _physical_ agp slots an the gtt driver that is used by the intel drm modules. Split them to prevent any further confusion. This patch just moves the code and includes intel-gtt.c in intel-agp.c Later patches will untangle these two drivers further. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-04-18agp/intel: introduce intel-agp.h header fileDaniel Vetter
Intel definitions have spilled into agp.h. Create a header file for them and also include it in efficion-agp.c 'cause it needs a few of them. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-04-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: Ignore LVDS EDID when it is unavailabe or invalid drm/i915: Add no_lvds entry for the Clientron U800 drm/i915: Rename many remaining uses of "output" to encoder or connector. drm/i915: Rename intel_output to intel_encoder. agp/intel: intel_845_driver is an agp driver! drm/i915: introduce to_intel_bo helper drm/i915: Disable FBC on 915GM and 945GM.
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-25agp/intel: intel_845_driver is an agp driver!Daniel Vetter
... not a GTT driver. So the additional chipset flush introduced in commit 2162e6a2b0cd5acbb9bd8a3c94e1c1269b078295 Author: Dave Airlie <airlied@redhat.com> Date: Wed Nov 21 16:36:31 2007 +1000 agp/intel: Add chipset flushing support for i8xx chipsets. to fix a GTT problem makes absolutely no sense. If this would really be needed for AGP chipsets, too, we should add it to all i8xx agp drivers, not just one. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-03-18agp/intel: Don't do the chipset flush on Sandybridge.Eric Anholt
This CPU should be coherent with graphics in this direction, though flushing graphics caches are still required. Fixes a system reset on module load on Sandybridge with 4G+ memory. Signed-off-by: Eric Anholt <eric@anholt.net>
2010-03-18agp/intel: Respect the GTT size on Sandybridge for scratch page setup.Eric Anholt
This is similar to 14bc490bbdf1b194ad1f5f3d2a0a27edfdf78986 which respected it for how much of the GTT we would actually use. Now we won't clear beyond allocated memory when filling the GTT with scratch page addresses. Signed-off-by: Eric Anholt <eric@anholt.net>
2010-03-08Merge branch 'for-next' into for-linusJiri Kosina
Conflicts: Documentation/filesystems/proc.txt arch/arm/mach-u300/include/mach/debug-macro.S drivers/net/qlge/qlge_ethtool.c drivers/net/qlge/qlge_main.c drivers/net/typhoon.c
2010-03-04Merge branch 'drm-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (151 commits) vga_switcheroo: disable default y by new rules. drm/nouveau: fix *staging* driver build with switcheroo off. drm/radeon: fix typo in Makefile vga_switcheroo: fix build on platforms with no ACPI drm/radeon: Fix printf type warning in 64bit system. drm/radeon/kms: bump the KMS version number for square tiling support. vga_switcheroo: initial implementation (v15) drm/radeon/kms: do not disable audio engine twice Revert "drm/radeon/kms: disable HDMI audio for now on rv710/rv730" drm/radeon/kms: do not preset audio stuff and start timer when not using audio drm/radeon: r100/r200 ums: block ability for userspace app to trash 0 page and beyond drm/ttm: fix function prototype to match implementation drm/radeon: use ALIGN instead of open coding it drm/radeon/kms: initialize set_surface_reg reg for rs600 asic drm/i915: Use a dmi quirk to skip a broken SDVO TV output. drm/i915: enable/disable LVDS port at DPMS time drm/i915: check for multiple write domains in pin_and_relocate drm/i915: clean-up i915_gem_flush_gpu_write_domain drm/i915: reuse i915_gpu_idle helper drm/i915: ensure lru ordering of fence_list ... Fixed trivial conflicts in drivers/gpu/vga/Kconfig
2010-02-26drm/i915: Add dependency on the intel agp moduleZhenyu Wang
See http://bugzilla.kernel.org/show_bug.cgi?id=15021 Make sure that the appropriate AGP module is loaded and probed before trying to set up the DRM. The DRM already depends on the AGP core, but in this case we know the specific AGP driver we need too, and can help users avoid the trap of loading the AGP driver after the DRM driver. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-02-26agp/intel: Add a new Sandybridge HB/IG PCI ID combo.Eric Anholt
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-02-26drm/i915, agp/intel: Fix stolen memory size on SandybridgeZhenyu Wang
New memory control config reg at 0x50 should be used for stolen memory size detection on Sandybridge. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-02-26agp/intel: Use a non-reserved value for the cache field of the PTEs.Eric Anholt
I don't know if this is what we'll want to be using long term, we'll see. Signed-off-by: Eric Anholt <eric@anholt.net>
2010-02-26agp/intel: Add support for Sandybridge.Eric Anholt
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-02-22agp/intel: official names for Pineview and IronlakeZhenyu Wang
Print official names for Pineview and Ironlake, which is Intel GMA3150 and Intel HD graphics. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-02-09tree-wide: Assorted spelling fixesDaniel Mack
In particular, several occurances of funny versions of 'success', 'unknown', 'therefore', 'acknowledge', 'argument', 'achieve', 'address', 'beginning', 'desirable', 'separate' and 'necessary' are fixed. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Joe Perches <joe@perches.com> Cc: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-01-22intel-agp: Switch to wbinvd_on_all_cpusBorislav Petkov
Simplify if-statement while at it. [ hpa: we need to #include <asm/smp.h> ] Cc: Dave Jones <davej@redhat.com> Cc: David Airlie <airlied@linux.ie> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> LKML-Reference: <1264172467-25155-3-git-send-email-bp@amd64.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-01-15drm/i915: enable 36bit physical address for hardware status pageZhenyu Wang
This enables possible 36bit address mask on 965G that use physical address for hw status page. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-10Merge remote branch 'anholt/drm-intel-next' into drm-linusDave Airlie
Pull more Intel changes in, especially one to init the GTT properly