aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2011-09-20ARM: pm: preallocate a page table for suspend/resumeRussell King
Preallocate a page table and setup an identity mapping for the MMU enable code. This means we don't have to "borrow" a page table to do this, avoiding complexities with L2 cache coherency. Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-20ARM: pm: force non-zero return value from __cpu_suspend when abortingRussell King
Ensure that the return value from __cpu_suspend is non-zero when aborting. Zero indicates a successful suspend occurred. Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-28ARM: pm: avoid writing the auxillary control register for ARMv7Russell King
For ARMv7 kernels running in the non-secure world, writing to the auxillary control register causes an abort, so we must avoid directly writing the auxillary control register. If the ACR has already been reinitialized by SoC code, don't try to restore it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-28ARM: pm: some ARMv7 requires a dsb in resume to ensure correctnessRussell King
Add a dsb after the isb to ensure that the previous writes to the CP15 registers take effect before we enable the MMU. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-28ARM: pm: arm920/926: fix number of registers savedRussell King
ARM920 and ARM926 save four registers, not three. Fix the size of the suspend region required. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-28ARM: pm: CPU specific code should not overwrite r1 (v:p offset)Russell King
r1 stores the v:p offset from the CPU invariant resume code, and is expected to be preserved by the CPU specific code. Overwriting it is not a good idea. We've managed to get away with it on sa1100 platforms because most happen to have PHYS_OFFSET == PAGE_OFFSET, but that may not be the case depending on kernel configuration. So fix this latent bug. This fixes xsc3 as well which was saving and restoring this register independently. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-28ARM: 7066/1: proc-v7: disable SCTLR.TE when disabling MMUWill Deacon
cpu_v7_reset disables the MMU and then branches to the provided address. On Thumb-2 kernels, we should take care to clear the Thumb Exception enable bit in the System Control Register, otherwise this may wreak havok in the code to which we are branching (for example, an ARM kernel image via kexec). Reviewed-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-28ARM: 7065/1: kexec: ensure new kernel is entered in ARM stateWill Deacon
Commit 540b5738 ("ARM: 6999/1: head, zImage: Always Enter the kernel in ARM state") mandates that the kernel should be entered in ARM state. If a Thumb-2 kernel kexecs a new kernel image, we need to ensure that we change state when branching to the new code. This patch replaces a mov pc, lr with a bx lr on Thumb-2 kernels so that we transition to ARM state if need be. Reviewed-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-24ARM: 7003/1: vexpress: Add clock definition for the SP805.Nick Bowler
It seems that an entry for the SP805 watchdog in the table of clocks was missing. This results in the sp805_wdt driver rejecting the device with the following errors: sp805-wdt mb:wdt: Clock not found sp805-wdt mb:wdt: Probe Failed!!! sp805-wdt: probe of mb:wdt failed with error -2 While not obviously stated in the hardware docs, the onboard SP810's "REFCLK" is connected to a 32.768KHz crystal, and this drives the watchdog. Add a struct clk and corresponding lookup entry for it. Signed-off-by: Nick Bowler <nbowler@elliptictech.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-22ARM: 7051/1: cpuimx* boards: fix mach-types errorsEric Bénard
I made some changes to the entry in the ARM Machine Registry after submission which was the wrong thing to do. This patch should help to fix this error. Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-19ARM: 7019/1: Footbridge: select CLKEVT_I8253 for ARCH_NETWINDERAxel Lin
Since commit 8560a6cfc9818edde1fd8677961714b264ffa03d "arm: Footbridge: Use common i8253 clockevent", ARCH_NETWINDER needs to select CLKEVT_I8253. This patch fixes below build error with "make netwinder_defconfig". LD .tmp_vmlinux1 arch/arm/mach-footbridge/built-in.o: In function `isa_timer_init': isa-rtc.c:(.init.text+0x12c8): undefined reference to `clockevent_i8253_init' isa-rtc.c:(.init.text+0x12d0): undefined reference to `i8253_clockevent' arch/arm/mach-footbridge/built-in.o:(.data+0x198): undefined reference to `i8253_clockevent' make: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-15ARM: 7015/1: ARM errata: Possible cache data corruption with hit-under-miss ↵Catalin Marinas
enabled This patch is a workaround for the 364296 ARM1136 r0p2 erratum (possible cache data corruption with hit-under-miss enabled). It sets the undocumented bit 31 in the auxiliary control register and the FI bit in the control register, thus disabling hit-under-miss without putting the processor into full low interrupt latency mode. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-15ARM: 7014/1: cache-l2x0: Fix L2 Cache size calculation.Srinivas Kandagatla
This patch fixes L2 Cache size calculations for L2C-210, L2C-310 and PL310, by changing the L2X0_AUX_CTRL_WAY_SIZE_MASK from 2 bits to 3 bits. The Auxiliary Control Register for L2C-210, L2C-310 and PL310 has 3bits [19:17] for Way size, however the existing code only uses 2 bits to get this value. This results in incorrect cachesize calculations. It also results in performing operations on the whole cache when we erroneously decide that the range is big enough (due to l2x0_size being too small) and also prints incorrect cachesize. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Acked-by: Will Deacon <will.deacon@arm.com> Cc: stable@kernel.org Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-15ARM: 6967/1: ep93xx: ts72xx: fix board model detectionPetr Štetiar
Fix the obvious error in board detection logic, because according to the TS's manual, the model is stored in the least three significant bits. For example the byte read on my ts-7300 is 0x23 and the detection then fails. Cc: Ryan Mallon <ryan@bluewatersys.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-15ARM: 6965/1: ep93xx: add model detection for ts-7300 and ts-7400 boardsPetr Štetiar
Cc: Ryan Mallon <ryan@bluewatersys.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-13Merge branch '3.1-fixes-for-rmk' of git://linux-arm.org/linux-2.6-wd into fixesRussell King
2011-08-12Merge branch 'x86-vdso-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-tip * 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-tip: x86-64: Rework vsyscall emulation and add vsyscall= parameter x86-64: Wire up getcpu syscall x86: Remove unnecessary compile flag tweaks for vsyscall code x86-64: Add vsyscall:emulate_vsyscall trace event x86-64: Add user_64bit_mode paravirt op x86-64, xen: Enable the vvar mapping x86-64: Work around gold bug 13023 x86-64: Move the "user" vsyscall segment out of the data segment. x86-64: Pad vDSO to a page boundary
2011-08-12Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (32 commits) ARM: mmp: Change the way we use timer 0 as clockevent timer. ARM: mmp: Switch to using timer 1 as clocksource timer. ARM: mmp: Also start timer 1 on boot. ARM: pxa168/gplugd: free correct GPIO ARM: pxa168/gplugd: get rid of mfp-gplugd.h ARM: pxa: fix logic error in PJ4 iWMMXt handling mach-sa1100: fix PCI build problem omap: timer: Set dmtimer used as clocksource in autoreload mode OMAP3: am3517crane: remove NULL board_mux from board file arm: mach-omap2: mux: use kstrdup() arch:arm:plat-omap:iovmm: remove unused variable 'va' Update Nook Color machine 3284 to common Encore name am3505/3517: Various platform defines for UART4 OMAP: hwmod: fix build break on non-OMAP4 multi-OMAP2 builds OMAP: Fix linking error in twl-common.c for OMAP2/3/4 only builds iMX: Fix build for iMX53 ARM: mx5: board-cpuimx51.c fixup irq_to_gpio() usage OMAP2+: PM: SmartReflex: use put_sync_suspend for IRQ-safe disabling OMAP3: beagle: don't touch omap_device internals OMAP1: enable GENERIC_IRQ_CHIP ...
2011-08-12Merge branch 'fixes' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into fixes
2011-08-12Merge branch 'fix' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into fixes
2011-08-12Merge branch 'imx-fixes-for-arnd' of ↵Arnd Bergmann
git://git.pengutronix.de/git/imx/linux-2.6 into fixes
2011-08-12ARM: cache: detect VIPT aliasing I-cache on ARMv6Will Deacon
The current cache detection code does not check for an aliasing I-cache if the D-cache is found to be VIPT aliasing. This patch fixes the problem by always checking for an aliasing I-cache on v6 and later. Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-12ARM: twd: register clockevents device before enabling PPIWill Deacon
The smp_twd clockevents driver currently enables the local timer PPI before the clockevents device is registered. This can lead to a kernel panic if a spurious timer interrupt is generated before registration has completed since the kernel will treat it as an IPI timer. This patch moves the clockevents device registration before the IRQ unmasking so that we can always handle timer interrupts once they can occur. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-12ARM: realview: ensure visibility of writes during resetWill Deacon
The various reset routines in mach-realview rely on an FPGA to power-cycle the board after writing some magic runes to memory-mapped registers. This patch adds a dsb() following the writes, so that they become visible before we mdelay(1000) in the arch_reset code. Without this patch, the timeout would expire sporadically, causing the reset to fail. Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-12ARM: perf: make name of arm_pmu_type consistentMark Rutland
Commit f12482c9 ("ARM: 6974/1: pmu: refactor reservation") changed {release,reserve}_pmu to take an enum arm_pmu_type as a parameter, but inconsistently named the parameter `type' or `device'. It would be nice if these were consistent. This patch makes use of enum arm_pmu_type consistent, always using `type'. Related printks are updated, explicitly mentioning `type' also. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-12ARM: perf: fix prototype of release_pmuMark Rutland
Commit f12482c9 ("ARM: 6974/1: pmu: refactor reservation") changed the prototype of release_pmu, but missed the stub for when CONFIG_CPU_HAS_PMU is not selected by the platform. This patch changes the prototype of the stub, preventing possible build failures when CONFIG_CPU_HAS_PMU is not selected. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: Don't do hypervisor calls on non-sun4v in DS driver.
2011-08-11sparc: Don't do hypervisor calls on non-sun4v in DS driver.David S. Miller
Reported-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf symbols: Check '/tmp/perf-' symbol file ownership perf sched: Usage leftover from trace -> script rename perf sched: Do not delete session object prematurely perf tools: Check $HOME/.perfconfig ownership perf, x86: Add model 45 SandyBridge support perf tools: Add support to install perf python extension perf tools: do not look at ./config for configuration perf tools: Make clean leaves some files perf lock: Dropping unsupported ':r' modifier perf probe: Fix coredump introduced by probe module option jump label: Reduce the cycle count by changing the link order perf report: Use ui__warning in some more places perf python: Add PERF_RECORD_{LOST,READ,SAMPLE} routine tables perf evlist: Introduce 'disable' method trace events: Update version number reference to new 3.x scheme for EVENT_POWER_TRACING_DEPRECATED perf buildid-cache: Zero out buffer of filenames when adding/removing buildid
2011-08-11ARM: mmp: Change the way we use timer 0 as clockevent timer.Lennert Buytenhek
Instead of setting up a match interrupt for 'current_time + delta' on ->set_next_event(), program timer 0 to count down from 'delta - 1' and trigger an interrupt when it reaches zero. Signed-off-by: Lennert Buytenhek <buytenh@laptop.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-08-11ARM: mmp: Switch to using timer 1 as clocksource timer.Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@laptop.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-08-11ARM: mmp: Also start timer 1 on boot.Lennert Buytenhek
Currently, arch-mmp/time.c uses timer 0 both as a clocksource timer and as a clockevent timer, the latter by setting up a comparator interrupt to match on 'current_time + delta'. This is problematic if delta is small enough, as that can lead to 'current_time + delta' already being in the past when comparator setup has finished, leading to the requested event not triggering. As there is also a silicon issue that requires stopping a timer's counter while writing to one of its match registers, we'll switch to using two separate timers -- timer 0 as clockevent timer, which we'll start and stop on every invocation of ->set_next_event(), and timer 1 as clocksource timer, which will be free-running. This first patch enables timer 1 on boot, so that we can use it as clocksource timer. Signed-off-by: Lennert Buytenhek <buytenh@laptop.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-08-11ARM: pxa168/gplugd: free correct GPIOTanmay Upadhyay
Signed-off-by: Tanmay Upadhyay <tanmay.upadhyay@einfochips.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-08-11ARM: pxa168/gplugd: get rid of mfp-gplugd.hTanmay Upadhyay
Move definitions from mfp-gplugd.h to mfp-pxa168.h as they aren't gplugD specific. Signed-off-by: Tanmay Upadhyay <tanmay.upadhyay@einfochips.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-08-11ARM: pxa: fix logic error in PJ4 iWMMXt handlingLennert Buytenhek
This got added in: commit ef6c84454f8567d4968c210d7d194fb711ed3739 Author: Haojian Zhuang <haojian.zhuang@marvell.com> Date: Wed Nov 24 11:54:25 2010 +0800 ARM: pxa: add iwmmx support for PJ4 which does: - mrc p15, 0, r2, c15, c1, 0 - orr r2, r2, #0x3 @ enable access to CP0 and CP1 - mcr p15, 0, r2, c15, c1, 0 + @ enable access to CP0 and CP1 + XSC(mrc p15, 0, r2, c15, c1, 0) + XSC(orr r2, r2, #0x3) + XSC(mcr p15, 0, r2, c15, c1, 0) but then later does: - mrc p15, 0, r4, c15, c1, 0 - orr r4, r4, #0x3 @ enable access to CP0 and CP1 - mcr p15, 0, r4, c15, c1, 0 + @ enable access to CP0 and CP1 + XSC(mrc p15, 0, r4, c15, c1, 0) + XSC(orr r4, r4, #0xf) + XSC(mcr p15, 0, r4, c15, c1, 0) Signed-off-by: Lennert Buytenhek <buytenh@laptop.org> Acked-by Haojian <haojian.zhuang@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-08-10Merge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: drop experimental status for ARM_PATCH_PHYS_VIRT ARM: 7008/1: alignment: Make SIGBUS sent to userspace POSIXly correct ARM: 7007/1: alignment: Prevent ignoring of faults with ARMv6 unaligned access model ARM: 7010/1: mm: fix invalid loop for poison_init_mem ARM: 7005/1: freshen up mm/proc-arm946.S dmaengine: PL08x: Fix trivial build error ARM: Fix build error for SMP=n builds
2011-08-10x86-64: Rework vsyscall emulation and add vsyscall= parameterAndy Lutomirski
There are three choices: vsyscall=native: Vsyscalls are native code that issues the corresponding syscalls. vsyscall=emulate (default): Vsyscalls are emulated by instruction fault traps, tested in the bad_area path. The actual contents of the vsyscall page is the same as the vsyscall=native case except that it's marked NX. This way programs that make assumptions about what the code in the page does will not be confused when they read that code. vsyscall=none: Trying to execute a vsyscall will segfault. Signed-off-by: Andy Lutomirski <luto@mit.edu> Link: http://lkml.kernel.org/r/8449fb3abf89851fd6b2260972666a6f82542284.1312988155.git.luto@mit.edu Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-08-10x86-64: Wire up getcpu syscallAndy Lutomirski
getcpu is available as a vdso entry and an emulated vsyscall. Programs that for some reason don't want to use the vdso should still be able to call getcpu without relying on the slow emulated vsyscall. It costs almost nothing to expose it as a real syscall. We also need this for the following patch in vsyscall=native mode. Signed-off-by: Andy Lutomirski <luto@mit.edu> Link: http://lkml.kernel.org/r/6b19f55bdb06a0c32c2fa6dba9b6f222e1fde999.1312988155.git.luto@mit.edu Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-08-10x86: Remove unnecessary compile flag tweaks for vsyscall codeAndy Lutomirski
As of commit 98d0ac38ca7b1b7a552c9a2359174ff84decb600 Author: Andy Lutomirski <luto@mit.edu> Date: Thu Jul 14 06:47:22 2011 -0400 x86-64: Move vread_tsc and vread_hpet into the vDSO user code no longer directly calls into code in arch/x86/kernel/, so we don't need compile flag hacks to make it safe. All vdso code is in the vdso directory now. Signed-off-by: Andy Lutomirski <luto@mit.edu> Link: http://lkml.kernel.org/r/835cd05a4c7740544d09723d6ba48f4406f9826c.1312988155.git.luto@mit.edu Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-08-10Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Really fix build without CONFIG_PCI powerpc: Fix build without CONFIG_PCI powerpc/4xx: Fix build of PCI code on 405 powerpc/pseries: Simplify vpa deregistration functions powerpc/pseries: Cleanup VPA registration and deregistration errors powerpc/pseries: Fix kexec on recent firmware versions MAINTAINERS: change maintainership of mpc5xxx powerpc: Make KVM_GUEST default to n powerpc/kvm: Fix build errors with older toolchains powerpc: Lack of ibm,io-events not that important! powerpc: Move kdump default base address to half RMO size on 64bit powerpc/perf: Disable pagefaults during callchain stack read ppc: Remove duplicate definition of PV_POWER7 powerpc: pseries: Fix kexec on machines with more than 4TB of RAM powerpc: Jump label misalignment causes oops at boot powerpc: Clean up some panic messages in prom_init powerpc: Fix device tree claim code powerpc: Return the_cpu_ spec from identify_cpu powerpc: mtspr/mtmsr should take an unsigned long
2011-08-10mach-sa1100: fix PCI build problemLinus Walleij
The PCI nanoengine driver in the SA1100 machine probably has not been building for some time. It probably dragged hardware.h in implicitly and now it doesn't anymore. After this an SA1100 build selecting all system variants will build successfully. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-08-11powerpc: Really fix build without CONFIG_PCIBenjamin Herrenschmidt
Brown paper bag day, previous commit wouldn't work very well with modules enabled. Move the exports into the ifdef. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-08-10omap: timer: Set dmtimer used as clocksource in autoreload modeHemant Pedanekar
If CONFIG_OMAP_32K_TIMER is not selected and dmtimer is used as clocksource, the timer stops counting once overflow occurs as it was not set in autoreload mode. This results into timekeeping failure: for example, 'sleep 1' at the shell after the timer counter overflow would hang. This patch sets up autoreload when starting the clocksource timer which fixes the above issue. Signed-off-by: Hemant Pedanekar <hemantp@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-08-10OMAP3: am3517crane: remove NULL board_mux from board fileJohan Hovold
Since 7203f8a48bb63015ebe58a6f2a38aec1cb208b9d (arm: mach-omap2: remove NULL board_mux from board files) NULL board_mux is defined in mux.h. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-08-10arm: mach-omap2: mux: use kstrdup()Thomas Meyer
Use kstrdup rather than duplicating its implementation The semantic patch that makes this output is available in scripts/coccinelle/api/kstrdup.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-08-10arch:arm:plat-omap:iovmm: remove unused variable 'va'Maxin John
The pointer "va" returned from "phys_to_virt(pa)" is never used in "sgtable_fill_kmalloc()".So,it is safe to remove this set-but-unused variable. Signed-off-by: Maxin B. John <maxin.john@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-08-10Update Nook Color machine 3284 to common Encore nameOleg Drokin
Machine database already updated: http://www.arm.linux.org.uk/developer/machines/list.php?id=3284 Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-08-10am3505/3517: Various platform defines for UART4Raphaël Assénat
Add missing definitions for the AM3505/3517 UART4 such as DMAs, INTs and base address. Signed-of-by: Raphael Assenat <raph@8d.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-08-10Merge branch 'for_3.1/pm-fixes' of ↵Tony Lindgren
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into fixes
2011-08-10ARM: drop experimental status for ARM_PATCH_PHYS_VIRTRussell King
This has now been well tested, and several platforms are now selecting this directly. It's time to drop its experimental status. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-13 02:26:54 +0000