aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2009-12-13mfd: Optimised twl4030-power power scripts for the rx51Amit Kucheria
The power scripts optimisation was mainly done by: Tero Kristo <tero.kristo@nokia.com> and Arnaud Mandy <ext-arnaud.2.mandy@nokia.com> I'm only refactoring and testing it against the mainline kernel. Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: linux-omap@vger.kernel.org Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-12Merge branch 'ixp4xx' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chris/linux-2.6 * 'ixp4xx' of git://git.kernel.org/pub/scm/linux/kernel/git/chris/linux-2.6: IXP4xx: GTWX5715 platform only has two PCI IRQ lines, not four. IXP4xx: Introduce IXP4XX_GPIO_IRQ(n) macro and convert IXP4xx platform files. IXP4xx: move Gemtek GTWX5715 platform macros to the platform code. IXP4xx: Remove unused Motorola PrPMC1100 platform macros. IXP4xx: move FSG platform macros to the platform code. IXP4xx: move DSM G600 platform macros to the platform code. IXP4xx: move NAS100D platform macros to the platform code. IXP4xx: move NSLU2 platform macros to the platform code. IXP4xx: move Coyote platform macros to the platform code. IXP4xx: move AVILA platform macros to the platform code. IXP4xx: move IXDP425 platform macros to the platform code. IXP4xx: Extend PCI MMIO indirect address space to 1 GB. IXP4xx: Fix compilation failure with CONFIG_IXP4XX_INDIRECT_PCI. IXP4xx: Drop "__ixp4xx_" prefix from in/out/ioread/iowrite functions for clarity. IXP4xx: Rename indirect MMIO primitives from __ixp4xx_* to __indirect_*. IXP4xx: Ensure index is positive in irq_to_gpio() and npe_request(). ARM: fix insl() and outsl() endianness on IXP4xx architecture. IXP4xx: Fix normally-disabled debugging text in drivers/net/arm/ixp4xx_eth.c. IXP4xx: change the timer base frequency to 66.666000 MHz.
2009-12-12Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (151 commits) powerpc: Fix usage of 64-bit instruction in 32-bit altivec code MAINTAINERS: Add PowerPC patterns powerpc/pseries: Track previous CPPR values to correctly EOI interrupts powerpc/pseries: Correct pseries/dlpar.c build break without CONFIG_SMP powerpc: Make "intspec" pointers in irq_host->xlate() const powerpc/8xx: DTLB Miss cleanup powerpc/8xx: Remove DIRTY pte handling in DTLB Error. powerpc/8xx: Start using dcbX instructions in various copy routines powerpc/8xx: Restore _PAGE_WRITETHRU powerpc/8xx: Add missing Guarded setting in DTLB Error. powerpc/8xx: Fixup DAR from buggy dcbX instructions. powerpc/8xx: Tag DAR with 0x00f0 to catch buggy instructions. powerpc/8xx: Update TLB asm so it behaves as linux mm expects. powerpc/8xx: Invalidate non present TLBs powerpc/pseries: Serialize cpu hotplug operations during deactivate Vs deallocate pseries/pseries: Add code to online/offline CPUs of a DLPAR node powerpc: stop_this_cpu: remove the cpu from the online map. powerpc/pseries: Add kernel based CPU DLPAR handling sysfs/cpu: Add probe/release files powerpc/pseries: Kernel DLPAR Infrastructure ...
2009-12-12Merge branch 'omap-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (75 commits) omap3: Fix OMAP35XX_REV macros omap: serial: fix non-empty uart fifo read abort omap3: Zoom2/3: Update hsmmc board config params omap3 : Enable TWL4030 Keypad for Zoom2 and Zoom3 boards omap3: id code detection 3525 vs 3515 omap3: rx51: Use wl1251 in SPI mode 3 omap3: zoom2/3: make MMC slot work again omap1: htcherald: Update defconfig to include mux support omap1: LCD_DMA: Use some define rather than a hexadecimal omap: header: remove unused data-type omap: arch/arm/plat-omap/devices.c - sort alphabetically omap: Correcting GPMC_CONFIG1_DEVICETYPE_NAND OMAP3: serial - allow platforms specify which UARTs to initialize omap3: cm-t35: add mux initialization OMAP4: Sync up omap4430 defconfig OMAP4: Remove the secondary wait loop OMAP4: AuxCoreBoot registers only accessible in secure mode OMAP4: Fix SRAM base and size OMAP4: Fix cpu detection omap3: pandora: board file updates for .33 ...
2009-12-11Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86/amd-iommu: Fix PCI hotplug with passthrough mode x86/amd-iommu: Fix passthrough mode x86: mmio-mod.c: Use pr_fmt x86: kmmio.c: Add and use pr_fmt(fmt) x86: i8254.c: Add pr_fmt(fmt) x86: setup_percpu.c: Use pr_<level> and add pr_fmt(fmt) x86: es7000_32.c: Use pr_<level> and add pr_fmt(fmt) x86: Print DMI_BOARD_NAME as well as DMI_PRODUCT_NAME from __show_regs() x86: Factor duplicated code out of __show_regs() into show_regs_common() arch/x86/kernel/microcode*: Use pr_fmt() and remove duplicated KERN_ERR prefix x86, mce: fix confusion between bank attributes and mce attributes x86/mce: Set up timer unconditionally x86: Fix bogus warning in apic_noop.apic_write() x86: Fix typo in arch/x86/mm/kmmio.c x86: ASUS P4S800 reboot=bios quirk
2009-12-11Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (57 commits) x86, perf events: Check if we have APIC enabled perf_event: Fix variable initialization in other codepaths perf kmem: Fix unused argument build warning perf symbols: perf_header__read_build_ids() offset'n'size should be u64 perf symbols: dsos__read_build_ids() should read both user and kernel buildids perf tools: Align long options which have no short forms perf kmem: Show usage if no option is specified sched: Mark sched_clock() as notrace perf sched: Add max delay time snapshot perf tools: Correct size given to memset perf_event: Fix perf_swevent_hrtimer() variable initialization perf sched: Fix for getting task's execution time tracing/kprobes: Fix field creation's bad error handling perf_event: Cleanup for cpu_clock_perf_event_update() perf_event: Allocate children's perf_event_ctxp at the right time perf_event: Clean up __perf_event_init_context() hw-breakpoints: Modify breakpoints without unregistering them perf probe: Update perf-probe document perf probe: Support --del option trace-kprobe: Support delete probe syntax ...
2009-12-11Merge branch 'for-linus' of git://codeaurora.org/quic/kernel/dwalker/linux-msmLinus Torvalds
* 'for-linus' of git://codeaurora.org/quic/kernel/dwalker/linux-msm: HTC Dream: mmc compilation fixes video: Allow selecting MSM framebuffer in Kconfig Add arm msm maintainer entry msm: Add memory map for HTC Dream msm: add minimal board file for HTC Dream device msm: make debugging UART (for DEBUG_LL) configurable
2009-12-11omap3: Fix OMAP35XX_REV macrosSanjeev Premi
In original implementation, the revision passed to these macros contained revision number in lower nibble. But, later the revision bits (OMAP_REVBITS_XX) were defined to use omap_revision[15:08] where revision number is containied in higher nibble. This patch updates the macros; else incorrect revision is detected for OMAP35xx devices. Signed-off-by: Sanjeev Premi <premi@ti.com>
2009-12-11omap: serial: fix non-empty uart fifo read abortvikram pandita
OMAP3xxx and OMAP4430 UART IP blocks have a restriction wrt RX FIFO. Empty RX fifo read causes an abort. OMAP3xxx: UART IP revision >= 0x52 have this issue MVR register format is: Bits Field Name Description Type Reset 31:8 RESERVED RO 0x0 7:4 MAJOR Major revision number of the module. RO 0x-- 3:0 MINOR Minor revision number of the module. RO 0x-- OMAP4xxx: All revisions have this issue Revision id check is not used as the format of MVR resigster has changed For omap4 MVR register reads as: 0x50410602 => Revision id = 0x0602 Format of MVR register on omap4 is: (Courtesy: Cousson, Benoit) Bits Field Name Description Type Reset 31:30 SCHEME Scheme revision number of module RO 0x1 29:28 RESERVED RO 0x1 27:16 FUNC Function revision number of module RO 0x041 15:11 RTL Rtl revision number of module RO 0x00 10:8 MAJOR Major revision number of the module. RO 0x6 7:6 CUSTOM Custom revision number of the module. RO 0x0 5:0 MINOR Minor revision number of the module. RO 0x02 Override the default 8250 read handler: mem_serial_in() by a custom handler: serial_in_8250() which makes sure that RX fifo is not read when empty tested on zoom3(3630) board Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap3: Zoom2/3: Update hsmmc board config paramsMadhusudhan Chikkature
Update the hsmmc zoom peripheral configuration to support: Power saving mode mmc2 8-bit support Configure mmc2 as non removable Signed-off-by: Madhusudhan Chikkature <madhu.cr@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap3 : Enable TWL4030 Keypad for Zoom2 and Zoom3 boardsmanjugk manjugk
The TWL4030 keypad driver is not enabled by default for zoom2 and zoom3 boards. This patch will enable the same for both zoom2 and zoom3 boards. Tested on zoom2(3430) and zoom3(3630) boards. Signed-off-by: Manjunatha GK <manjugk@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap3: id code detection 3525 vs 3515Sergey Lapin
The runtime detection of OMAP3515 and OMAP3525 was reversed. Signed-off-by: Sergey Lapin <slapin@ossfans.org> Signed-off-by: Sanjeev Premi <premi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap3: rx51: Use wl1251 in SPI mode 3Kalle Valo
Otherwise Extreme Lower Power (ELP) wakeup doesn't work properly. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap3: zoom2/3: make MMC slot work againAnand Gadiyar
omap3: zoom2/3: make MMC slot work again Commit 12f8dfb56 accidentally broke MMC on zoom2/3. The .vmmc1 field of zoom_twldata was deleted. Restoring it allows the MMC slot to work again Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Acked-by: Madhusudhan Chikkature <madhu.cr@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap1: htcherald: Update defconfig to include mux supportCory Maccarrone
The existing htcherald_defconfig did not include mux support, which prevented USB and other functionality from working out of the box. This change updates the defconfig to add it in. It also aligns the defconfig to the -rc8 kernel config. Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap1: LCD_DMA: Use some define rather than a hexadecimalJanusz Krzysztofik
The patch corrects the issue introduced with one of my earlier patches: OMAP: DMA: Fix omapfb/lcdc on OMAP1510 broken when PM set[1] as pointed out by OMAP subsystem maintainer. Applies on top of my prevoius patch: OMAP: DMA: move LCD DMA related code from plat-omap to mach-omap1[2] Tested on Amstrad Delta Compile tested with omap_generic_2420_defconfig [1] http://patchwork.kernel.org/patch/57922/ [2] http://patchwork.kernel.org/patch/61952/ Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap: header: remove unused data-typevikram pandita
Remove unused data type omap_gpio_switch_config Thereby also get rid of following sparse warnings: arch/arm/plat-omap/include/plat/board.h :121:20: warning: dubious bitfield without explicit `signed' or `unsigned' arch/arm/plat-omap/include/plat/board.h :122:19: warning: dubious bitfield without explicit `signed' or `unsigned' arch/arm/plat-omap/include/plat/board.h :123:24: warning: dubious bitfield without explicit `signed' or `unsigned' Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap: arch/arm/plat-omap/devices.c - sort alphabeticallyLadislav Michl
Comment in omap_init_devices asks to keep init calls and their implementations in alphabetical order, so let it be that way. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap: Correcting GPMC_CONFIG1_DEVICETYPE_NANDVimal Singh
For NAND devices '2' should be used with GPMC_CONFIG1_DEVICETYPE instead of '1'. Signed-off-by: Vimal Singh <vimalsingh@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11OMAP3: serial - allow platforms specify which UARTs to initializeMika Westerberg
This patch adds new function: omap_serial_init_port(port) that can be used to initialize only selected UARTs as serial ports. Platforms can then in their board files call this function instead of omap_serial_init() if they don't want to use all UARTs as serial ports. Signed-off-by: Mika Westerberg <ext-mika.1.westerberg@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap3: cm-t35: add mux initializationMike Rapoport
CM-T35 can be assembled with different set of peripherals thus making certain interfaces available to user as GPIOs or dedicated pins. Because of it CM-T35 bootloader sets up mux configuration only for pins necessary to boot the system and the rest of the mux configuration is done by the kernel. Besides, having mux configuration in the kernel allows to minimize dependancy on bootloader. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11OMAP4: Sync up omap4430 defconfigSantosh Shilimkar
Enable minimum features to boot omap4430 on es1.0 samples. v2 versions removes the "CONFIG_SYSFS_DEPRECATED_V2" since it's deprecated. Without this older file system doesn't boot. One need to upgrade the filesystem if getting stuck in first init function. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11OMAP4: Remove the secondary wait loopSantosh Shilimkar
The secondary cores wakes up in time so the wait loop is not necessary anymore. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11OMAP4: AuxCoreBoot registers only accessible in secure modeSantosh Shilimkar
The AuxCoreBoot0 and AuxCoreBoot1 can be only accessed in secure mode. Replace the current code with secure monitor API's to access/modify these registers. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11OMAP4: Fix SRAM base and sizeSantosh Shilimkar
This patch fixes the public sram base address and available size on OMAP4430. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11OMAP4: Fix cpu detectionSantosh Shilimkar
This patch fixes the OMAP4430 cpu detection. The IC rev detection is done with hawkeye and rev. Note that rev does not map directly to defined processor revision numbers as ES1.0 uses value 0.It also fixes the SCM base address to read the correct ID_CODE register. Also the cpu_is_omap44xx() and cpu_is_omap443x() correctly populated instead of always being true Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap3: pandora: board file updates for .33Grazvydas Ignotas
Pandora board file updates: - change keycodes of game buttons it was decided not to use ABXY layout by the developers. - drop i2c bus 3 speed to 100kHz this is needed for battery monitoring chip to work reliably. - drop pandora_lcd platform_device the older DSS driver was never functional on l-o or mainline kernels due to missing panel driver, so remove unneeded pandora_lcd platform_device. This also removes last OMAP_TAG from the board file. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap3: Defconfig file of Always Innovating OMAP3-based Touch BookGregoire Gentil
Defconfig file of Always Innovating OMAP3-based Touch Book Signed-off-by: Gregoire Gentil <gregoire@gentil.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap3: Board file of Always Innovating OMAP3-based Touch BookGregoire Gentil
Board file of Always Innovating OMAP3-based Touch Book Signed-off-by: Gregoire Gentil <gregoire@gentil.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap1: I2C mux and clocks for omap7xxCory Maccarrone
This change adds MUX pin configuration and clocks for I2C support to OMAP 730 and 850-based devices. Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap1: Add omap7xx USB supportCory Maccarrone
This change implements USB client side support into the HTC Herald board configuration. It uses a similar, but updated algorithm to initialize the USB as is used in the linwizard project. Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap1: DMA: move LCD related code from plat-omap to mach-omap1Janusz Krzysztofik
All of the LCD DMA code in plat-omap/dma.c appears to be OMAP1-only (and apparently only is available on a subset of OMAP1 chips). Move this code to mach-omap1/lcd_dma.c. Tested on OMAP1510 Amstrad Delta. Compile-tested with omap_generic_2420_defconfig. Reported-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap1: Use gen_nandLadislav Michl
Since omapnand driver never find its way into mainline, switch to gen_nand instead. Following patch is compile tested only, but it is based on code I wrote for NetStar board and runtime tested it there. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Cc: Imre Deak <imre.deak@nokia.com> Cc: Brian Swetland <swetland@google.com> Cc: Kevin Hilman <kjh@hilman.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap: use smc91x_platdata to setup smc91xLadislav Michl
Use smc91x_platdata to setup smc91x, so we can get rid of OMAP specific stuff in smc91x driver Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap: mux: Add 36xx CBP package supportTony Lindgren
Add 36xx CBP package support Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap: mux: Remove old mux code for 34xxTony Lindgren
Remove old mux code for 34xx Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap: mux: Replace omap_cfg_reg() with new style signal or gpio functionsTony Lindgren
Replace omap_cfg_reg() with new style signal or gpio functions Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap: Split i2c platform init for mach-omap1 and mach-omap2Tony Lindgren
Otherwise we cannot limit new mux code to mach-omap2. The same signal names should eventually work for other omaps under mach-omap2. Note that these pins don't need to be OMAP_PIN_INPUT_PULLUP, just OMAP_PIN_INPUT is enough. Cc: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap: mux: Add debugfs support for new mux codeTony Lindgren
Add debugfs support for new mux code Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap: mux: Add new style init functions to omap3 board-*.c filesTony Lindgren
Add new style mux init functions to omap3 board-*.c files So far Beagle has been confirmed to be a CBB package, and CM-T35 a CUS package. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap: mux: Add new style pin multiplexing data for 34xxTony Lindgren
Add new style mux data for 34xx. This should also work with 3630 easily by adding the processor subset and ball data. Note that this data is __initdata, and gets optimized out except for the GPIO pins if CONFIG_OMAP_MUX is not set. Also note that this data uses omap3630 naming for the SDMMC registers instead of 34xx naming with just MMC. Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap: mux: Add new style pin multiplexing code for omap3Tony Lindgren
Initially only for 34xx. This code allows us to: - Make the code more generic as the omap internal signal names can stay the same across omap generations for some devices - Map mux registers to GPIO registers that is needed for dynamic muxing of pins during off-idle - Override bootloader mux values via kernel cmdline using omap_mux=some.signa1=0x1234,some.signal2=0x1234 - View and set the mux registers via debugfs if CONFIG_DEBUG_FS is enabled Cc: Mike Rapoport <mike@compulab.co.il> Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap2: mux: intoduce omap_mux_{read,write}Mike Rapoport
intoduce omap_mux_{read,write} Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11ARM: OMAP4: PM: Add init api for DPLL nodesRajendra Nayak
An api at init for all dpll nodes seem to be needed to reparent the dpll clk node to its bypass clk in case the dpll is in bypass. If not done this causes sequencing issues at init during propogate_rate. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com>
2009-12-11ARM: OMAP4: PM: Add support for OMAP4 dpll api'sRajendra Nayak
Most of the dpll api's from dpll.c are reused for OMAP4. This patch does extend a few api's for OMAP4 support. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com>
2009-12-11ARM: OMAP4: PM: Move DPLL control apis to dpll.cRajendra Nayak
This patch moves all the dpll control api's to a common file dpll.c. This is in preperation of omap4 support wherein most of these api's can be reused. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com>
2009-12-11ARM: OMAP4: PM: Add dummy hooks for OMAP4 dpll api'sRajendra Nayak
This patch adds dummy hooks for OMAP4 dpll api's. Removes dummy hooks for clkdev api's and enables CLKDEV for OMAP4. Also comments clockdomain calls from within the clock framework as its not supported yet for OMAP4. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com>
2009-12-11ARM: OMAP4: PM: OMAP4 clock tree and clkdev registrationRajendra Nayak
This patch defines all the clock nodes in OMAP4430 platform. All the clock node structs and the clkdev table is autogenerated using a python script (gen_clock_tree.py) developed by Paul Walmsley, Benoit Cousson and Rajendra Nayak. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com>
2009-12-11ARM: OMAP4: PM: Adds CM1/2 register field masksRajendra Nayak
This patch adds OMAP4 specific CM1 and CM2 module register field masks. Auto generated using a python script (gen_cm_shifts_and_mask.py) developed by Benoit Cousson, Paul Walmsley and Rajendra Nayak. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com>
2009-12-11ARM: OMAP4: PM: Adds PRM register shift and mask bitsRajendra Nayak
This patch adds OMAP4 specific PRM register bit field shifts and masks. Auto generated using a python script (gen_prm_shifts_and_mask.py) developed by Benoit Cousson, Paul Walmsley and Rajendra Nayak. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-21 07:54:20 +0000