aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2014-04-14ARM: Orion: Set eth packet size csum offload limitArnaud Patard (Rtp)
commit 58569aee5a1a5dcc25c34a0a2ed9a377874e6b05 upstream. The mv643xx ethernet controller limits the packet size for the TX checksum offloading. This patch sets this limits for Kirkwood and Dove which have smaller limits that the default. As a side note, this patch is an updated version of a patch sent some years ago: http://lists.infradead.org/pipermail/linux-arm-kernel/2010-June/017320.html which seems to have been lost. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net> [bwh: Backported to 3.2: adjust for the extra two parameters of orion_ge0{0,1}_init()] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> [yangyl: Backported to 3.4: Adjust context] Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14ARM: pxa: prevent PXA270 occasional reboot freezesSergei Ianovich
commit ff88b4724fde18056a4c539f7327389aec0f4c2d upstream. Erratum 71 of PXA270M Processor Family Specification Update (April 19, 2010) explains that watchdog reset time is just 8us insead of 10ms in EMTS. If SDRAM is not reset, it causes memory bus congestion and the device hangs. We put SDRAM in selfresh mode before watchdog reset, removing potential freezes. Without this patch PXA270-based ICP DAS LP-8x4x hangs after up to 40 reboots. With this patch it has successfully rebooted 500 times. Signed-off-by: Sergei Ianovich <ynvich@gmail.com> Tested-by: Marek Vasut <marex@denx.de> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14ARM: footbridge: fix VGA initialisationRussell King
commit 43659222e7a0113912ed02f6b2231550b3e471ac upstream. It's no good setting vga_base after the VGA console has been initialised, because if we do that we get this: Unable to handle kernel paging request at virtual address 000b8000 pgd = c0004000 [000b8000] *pgd=07ffc831, *pte=00000000, *ppte=00000000 0Internal error: Oops: 5017 [#1] ARM Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 3.12.0+ #49 task: c03e2974 ti: c03d8000 task.ti: c03d8000 PC is at vgacon_startup+0x258/0x39c LR is at request_resource+0x10/0x1c pc : [<c01725d0>] lr : [<c0022b50>] psr: 60000053 sp : c03d9f68 ip : 000b8000 fp : c03d9f8c r10: 000055aa r9 : 4401a103 r8 : ffffaa55 r7 : c03e357c r6 : c051b460 r5 : 000000ff r4 : 000c0000 r3 : 000b8000 r2 : c03e0514 r1 : 00000000 r0 : c0304971 Flags: nZCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment kernel which is an access to the 0xb8000 without the PCI offset required to make it work. Fixes: cc22b4c18540 ("ARM: set vga memory base at run-time") Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14ARM: 7743/1: compressed/head.S: work around new binutils warningArnd Bergmann
commit da94a829305f1c217cfdf6771cb1faca0917e3b9 upstream. In August 2012, Matthew Gretton-Dann checked a change into binutils labelled "Error on obsolete & warn on deprecated registers", apparently as part of ARMv8 support. Apparently, this was supposed to emit the message "Warning: This coprocessor register access is deprecated in ARMv8" when using certain mcr/mrc instructions and building for ARMv8. Unfortunately, the message that is actually emitted appears to be '(null)', which is less helpful in comparison. Even more unfortunately, this is biting us on every single kernel build with a new gas, because arch/arm/boot/compressed/head.S and some other files in that directory are built with -march=all since kernel commit 80cec14a8 "[ARM] Add -march=all to assembly file build in arch/arm/boot/compressed" back in v2.6.28. This patch reverts Russell's nice solution and instead marks the head.S file to be built for armv7-a, which fortunately lets us build all instructions in that file without warnings even on the broken binutils. Without this patch, building anything results in: arch/arm/boot/compressed/head.S: Assembler messages: arch/arm/boot/compressed/head.S:565: Warning: (null) arch/arm/boot/compressed/head.S:676: Warning: (null) arch/arm/boot/compressed/head.S:698: Warning: (null) arch/arm/boot/compressed/head.S:722: Warning: (null) arch/arm/boot/compressed/head.S:726: Warning: (null) arch/arm/boot/compressed/head.S:957: Warning: (null) arch/arm/boot/compressed/head.S:996: Warning: (null) arch/arm/boot/compressed/head.S:997: Warning: (null) arch/arm/boot/compressed/head.S:1027: Warning: (null) arch/arm/boot/compressed/head.S:1035: Warning: (null) arch/arm/boot/compressed/head.S:1046: Warning: (null) arch/arm/boot/compressed/head.S:1060: Warning: (null) arch/arm/boot/compressed/head.S:1092: Warning: (null) arch/arm/boot/compressed/head.S:1094: Warning: (null) arch/arm/boot/compressed/head.S:1095: Warning: (null) arch/arm/boot/compressed/head.S:1102: Warning: (null) arch/arm/boot/compressed/head.S:1134: Warning: (null) Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Matthew Gretton-Dann <matthew.gretton-dann@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> [bwh: Backported to 3.2: - Adjust context - Remove definition of asflags-y as it is now empty] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14ARM: 7742/1: topology: export cpu_topologyArnd Bergmann
commit 92bdd3f5eba299b33c2f4407977d6fa2e2a6a0da upstream. The cpu_topology symbol is required by any driver using the topology interfaces, which leads to a couple of build errors: ERROR: "cpu_topology" [drivers/net/ethernet/sfc/sfc.ko] undefined! ERROR: "cpu_topology" [drivers/cpufreq/arm_big_little.ko] undefined! ERROR: "cpu_topology" [drivers/block/mtip32xx/mtip32xx.ko] undefined! The obvious solution is to export this symbol. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Will Deacon <will.deacon@arm.com> Cc: Nicolas Pitre <nico@linaro.org> Cc: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14ARM: u300: fix ages old copy/paste bugLinus Walleij
commit 0259d9eb30d003af305626db2d8332805696e60d upstream. The UART1 is on the fast AHB bridge, not on the slow bus. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14ARM: w90x900: fix legacy assembly syntaxArnd Bergmann
commit fa5ce5f94c0f2bfa41ba68d2d2524298e1fc405e upstream. New ARM binutils don't allow extraneous whitespace inside of brackets, which causes this error on all mach-w90x900 defconfigs: arch/arm/kernel/entry-armv.S: Assembler messages: arch/arm/kernel/entry-armv.S:214: Error: ARM register expected -- `ldr r0,[ r6,#(0x10C)]' arch/arm/kernel/entry-armv.S:214: Error: ARM register expected -- `ldr r0,[ r6,#(0x110)]' arch/arm/kernel/entry-armv.S:430: Error: ARM register expected -- `ldr r0,[ r6,#(0x10C)]' arch/arm/kernel/entry-armv.S:430: Error: ARM register expected -- `ldr r0,[ r6,#(0x110)]' This removes the whitespace in order to build the kernel again. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14ARM: dts: imx51-babbage: fix esdhc cd/wp propertiesShawn Guo
commit a46d2619d7180bda12bad2bf15bbd0731dfc2dcf upstream. The binding doc and dts use properties "fsl,{cd,wp}-internal" while esdhc driver uses "fsl,{cd,wp}-controller". Fix binding doc and dts to get them match driver code. Reported-by: Chris Ball <cjb@laptop.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Chris Ball <cjb@laptop.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14compiler/gcc4: Add quirk for 'asm goto' miscompilation bugIngo Molnar
commit 3f0116c3238a96bc18ad4b4acefe4e7be32fa861 upstream. Fengguang Wu, Oleg Nesterov and Peter Zijlstra tracked down a kernel crash to a GCC bug: GCC miscompiles certain 'asm goto' constructs, as outlined here: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670 Implement a workaround suggested by Jakub Jelinek. Reported-and-tested-by: Fengguang Wu <fengguang.wu@intel.com> Reported-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Suggested-by: Jakub Jelinek <jakub@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> [hq: Backported to 3.4: Adjust context] Signed-off-by: Qiang Huang <h.huangqiang@huawei.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-03x86: fix boot on uniprocessor systemsArtem Fetishev
commit 825600c0f20e595daaa7a6dd8970f84fa2a2ee57 upstream. On x86 uniprocessor systems topology_physical_package_id() returns -1 which causes rapl_cpu_prepare() to leave rapl_pmu variable uninitialized which leads to GPF in rapl_pmu_init(). See arch/x86/kernel/cpu/perf_event_intel_rapl.c. It turns out that physical_package_id and core_id can actually be retreived for uniprocessor systems too. Enabling them also fixes rapl_pmu code. Signed-off-by: Artem Fetishev <artem_fetishev@epam.com> Cc: Stephane Eranian <eranian@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-30KVM: VMX: fix use after free of vmx->loaded_vmcsMarcelo Tosatti
commit 26a865f4aa8e66a6d94958de7656f7f1b03c6c56 upstream. After free_loaded_vmcs executes, the "loaded_vmcs" structure is kfreed, and now vmx->loaded_vmcs points to a kfreed area. Subsequent free_loaded_vmcs then attempts to manipulate vmx->loaded_vmcs. Switch the order to avoid the problem. https://bugzilla.redhat.com/show_bug.cgi?id=1047892 Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Cc: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-30KVM: MMU: handle invalid root_hpa at __direct_mapMarcelo Tosatti
commit 989c6b34f6a9480e397b170cc62237e89bf4fdb9 upstream. It is possible for __direct_map to be called on invalid root_hpa (-1), two examples: 1) try_async_pf -> can_do_async_pf -> vmx_interrupt_allowed -> nested_vmx_vmexit 2) vmx_handle_exit -> vmx_interrupt_allowed -> nested_vmx_vmexit Then to load_vmcs12_host_state and kvm_mmu_reset_context. Check for this possibility, let fault exception be regenerated. BZ: https://bugzilla.redhat.com/show_bug.cgi?id=924916 Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-30ARM: move outer_cache declaration out of ifdefRob Herring
commit 0b53c11d533a8f6688d73fad0baf67dd08ec1b90 upstream. Move the outer_cache declaration of the CONFIG_OUTER_CACHE ifdef so that outer_cache can be used inside IS_ENABLED condition. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-30x86: bpf_jit: support negative offsetsAlexei Starovoitov
commit fdfaf64e75397567257e1051931f9a3377360665 upstream. Commit a998d4342337 claimed to introduce negative offset support to x86 jit, but it couldn't be working, since at the time of the execution of LD+ABS or LD+IND instructions via call into bpf_internal_load_pointer_neg_helper() the %edx (3rd argument of this func) had junk value instead of access size in bytes (1 or 2 or 4). Store size into %edx instead of %ecx (what original commit intended to do) Fixes: a998d4342337 ("bpf jit: Let the x86 jit handle negative offsets") Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Jan Seiffert <kaffeemonster@googlemail.com> Cc: Eric Dumazet <edumazet@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23KVM: SVM: fix cr8 intercept windowRadim Krčmář
commit 596f3142d2b7be307a1652d59e7b93adab918437 upstream. We always disable cr8 intercept in its handler, but only re-enable it if handling KVM_REQ_EVENT, so there can be a window where we do not intercept cr8 writes, which allows an interrupt to disrupt a higher priority task. Fix this by disabling intercepts in the same function that re-enables them when needed. This fixes BSOD in Windows 2008. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23x86/amd/numa: Fix northbridge quirk to assign correct NUMA nodeDaniel J Blueman
commit 847d7970defb45540735b3fb4e88471c27cacd85 upstream. For systems with multiple servers and routed fabric, all northbridges get assigned to the first server. Fix this by also using the node reported from the PCI bus. For single-fabric systems, the northbriges are on PCI bus 0 by definition, which are on NUMA node 0 by definition, so this is invarient on most systems. Tested on fam10h and fam15h single and multi-fabric systems and candidate for stable. Signed-off-by: Daniel J Blueman <daniel@numascale.com> Acked-by: Steffen Persvold <sp@numascale.com> Acked-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1394710981-3596-1-git-send-email-daniel@numascale.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23ARM: 7991/1: sa1100: fix compile problem on CollieLinus Walleij
commit 052450fdc55894a39fbae93d9bbe43947956f663 upstream. Due to a problem in the MFD Kconfig it was not possible to compile the UCB battery driver for the Collie SA1100 system, in turn making it impossible to compile in the battery driver. (See patch "mfd: include all drivers in subsystem menu".) After fixing the MFD Kconfig (separate patch) a compile error appears in the Collie battery driver due to the <mach/collie.h> implicitly requiring <mach/hardware.h> through <linux/gpio.h> via <mach/gpio.h> prior to commit 40ca061b "ARM: 7841/1: sa1100: remove complex GPIO interface". Fix this up by including the required header into <mach/collie.h>. Cc: Andrea Adami <andrea.adami@gmail.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23powerpc: Align p_dyn, p_rela and p_st symbolsAnton Blanchard
commit a5b2cf5b1af424ee3dd9e3ce6d5cea18cb927e67 upstream. The 64bit relocation code places a few symbols in the text segment. These symbols are only 4 byte aligned where they need to be 8 byte aligned. Add an explicit alignment. Signed-off-by: Anton Blanchard <anton@samba.org> Tested-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-11xen/smp/spinlock: Fix leakage of the spinlock interrupt line for every CPU ↵Konrad Rzeszutek Wilk
online/offline commit 66ff0fe9e7bda8aec99985b24daad03652f7304e upstream. While we don't use the spinlock interrupt line (see for details commit f10cd522c5fbfec9ae3cc01967868c9c2401ed23 - xen: disable PV spinlocks on HVM) - we should still do the proper init / deinit sequence. We did not do that correctly and for the CPU init for PVHVM guest we would allocate an interrupt line - but failed to deallocate the old interrupt line. This resulted in leakage of an irq_desc but more importantly this splat as we online an offlined CPU: genirq: Flags mismatch irq 71. 0002cc20 (spinlock1) vs. 0002cc20 (spinlock1) Pid: 2542, comm: init.late Not tainted 3.9.0-rc6upstream #1 Call Trace: [<ffffffff811156de>] __setup_irq+0x23e/0x4a0 [<ffffffff81194191>] ? kmem_cache_alloc_trace+0x221/0x250 [<ffffffff811161bb>] request_threaded_irq+0xfb/0x160 [<ffffffff8104c6f0>] ? xen_spin_trylock+0x20/0x20 [<ffffffff813a8423>] bind_ipi_to_irqhandler+0xa3/0x160 [<ffffffff81303758>] ? kasprintf+0x38/0x40 [<ffffffff8104c6f0>] ? xen_spin_trylock+0x20/0x20 [<ffffffff810cad35>] ? update_max_interval+0x15/0x40 [<ffffffff816605db>] xen_init_lock_cpu+0x3c/0x78 [<ffffffff81660029>] xen_hvm_cpu_notify+0x29/0x33 [<ffffffff81676bdd>] notifier_call_chain+0x4d/0x70 [<ffffffff810bb2a9>] __raw_notifier_call_chain+0x9/0x10 [<ffffffff8109402b>] __cpu_notify+0x1b/0x30 [<ffffffff8166834a>] _cpu_up+0xa0/0x14b [<ffffffff816684ce>] cpu_up+0xd9/0xec [<ffffffff8165f754>] store_online+0x94/0xd0 [<ffffffff8141d15b>] dev_attr_store+0x1b/0x20 [<ffffffff81218f44>] sysfs_write_file+0xf4/0x170 [<ffffffff811a2864>] vfs_write+0xb4/0x130 [<ffffffff811a302a>] sys_write+0x5a/0xa0 [<ffffffff8167ada9>] system_call_fastpath+0x16/0x1b cpu 1 spinlock event irq -16 smpboot: Booting Node 0 Processor 1 APIC 0x2 And if one looks at the /proc/interrupts right after offlining (CPU1): 70: 0 0 xen-percpu-ipi spinlock0 71: 0 0 xen-percpu-ipi spinlock1 77: 0 0 xen-percpu-ipi spinlock2 There is the oddity of the 'spinlock1' still being present. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-11xen/smp: Fix leakage of timer interrupt line for every CPU online/offline.Konrad Rzeszutek Wilk
commit 888b65b4bc5e7fcbbb967023300cd5d44dba1950 upstream. In the PVHVM path when we do CPU online/offline path we would leak the timer%d IRQ line everytime we do a offline event. The online path (xen_hvm_setup_cpu_clockevents via x86_cpuinit.setup_percpu_clockev) would allocate a new interrupt line for the timer%d. But we would still use the old interrupt line leading to: kernel BUG at /home/konrad/ssd/konrad/linux/kernel/hrtimer.c:1261! invalid opcode: 0000 [#1] SMP RIP: 0010:[<ffffffff810b9e21>] [<ffffffff810b9e21>] hrtimer_interrupt+0x261/0x270 .. snip.. <IRQ> [<ffffffff810445ef>] xen_timer_interrupt+0x2f/0x1b0 [<ffffffff81104825>] ? stop_machine_cpu_stop+0xb5/0xf0 [<ffffffff8111434c>] handle_irq_event_percpu+0x7c/0x240 [<ffffffff811175b9>] handle_percpu_irq+0x49/0x70 [<ffffffff813a74a3>] __xen_evtchn_do_upcall+0x1c3/0x2f0 [<ffffffff813a760a>] xen_evtchn_do_upcall+0x2a/0x40 [<ffffffff8167c26d>] xen_hvm_callback_vector+0x6d/0x80 <EOI> [<ffffffff81666d01>] ? start_secondary+0x193/0x1a8 [<ffffffff81666cfd>] ? start_secondary+0x18f/0x1a8 There is also the oddity (timer1) in the /proc/interrupts after offlining CPU1: 64: 1121 0 xen-percpu-virq timer0 78: 0 0 xen-percpu-virq timer1 84: 0 2483 xen-percpu-virq timer2 This patch fixes it. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-11xen/boot: Disable BIOS SMP MP table search.Konrad Rzeszutek Wilk
commit bd49940a35ec7d488ae63bd625639893b3385b97 upstream. As the initial domain we are able to search/map certain regions of memory to harvest configuration data. For all low-level we use ACPI tables - for interrupts we use exclusively ACPI _PRT (so DSDT) and MADT for INT_SRC_OVR. The SMP MP table is not used at all. As a matter of fact we do not even support machines that only have SMP MP but no ACPI tables. Lets follow how Moorestown does it and just disable searching for BIOS SMP tables. This also fixes an issue on HP Proliant BL680c G5 and DL380 G6: 9f->100 for 1:1 PTE Freeing 9f-100 pfn range: 97 pages freed 1-1 mapping on 9f->100 .. snip.. e820: BIOS-provided physical RAM map: Xen: [mem 0x0000000000000000-0x000000000009efff] usable Xen: [mem 0x000000000009f400-0x00000000000fffff] reserved Xen: [mem 0x0000000000100000-0x00000000cfd1dfff] usable .. snip.. Scan for SMP in [mem 0x00000000-0x000003ff] Scan for SMP in [mem 0x0009fc00-0x0009ffff] Scan for SMP in [mem 0x000f0000-0x000fffff] found SMP MP-table at [mem 0x000f4fa0-0x000f4faf] mapped at [ffff8800000f4fa0] (XEN) mm.c:908:d0 Error getting mfn 100 (pfn 5555555555555555) from L1 entry 0000000000100461 for l1e_owner=0, pg_owner=0 (XEN) mm.c:4995:d0 ptwr_emulate: could not get_page_from_l1e() BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff81ac07e2>] xen_set_pte_init+0x66/0x71 . snip.. Pid: 0, comm: swapper Not tainted 3.6.0-rc6upstream-00188-gb6fb969-dirty #2 HP ProLiant BL680c G5 .. snip.. Call Trace: [<ffffffff81ad31c6>] __early_ioremap+0x18a/0x248 [<ffffffff81624731>] ? printk+0x48/0x4a [<ffffffff81ad32ac>] early_ioremap+0x13/0x15 [<ffffffff81acc140>] get_mpc_size+0x2f/0x67 [<ffffffff81acc284>] smp_scan_config+0x10c/0x136 [<ffffffff81acc2e4>] default_find_smp_config+0x36/0x5a [<ffffffff81ac3085>] setup_arch+0x5b3/0xb5b [<ffffffff81624731>] ? printk+0x48/0x4a [<ffffffff81abca7f>] start_kernel+0x90/0x390 [<ffffffff81abc356>] x86_64_start_reservations+0x131/0x136 [<ffffffff81abfa83>] xen_start_kernel+0x65f/0x661 (XEN) Domain 0 crashed: 'noreboot' set - not rebooting. which is that ioremap would end up mapping 0xff using _PAGE_IOMAP (which is what early_ioremap sticks as a flag) - which meant we would get MFN 0xFF (pte ff461, which is OK), and then it would also map 0x100 (b/c ioremap tries to get page aligned request, and it was trying to map 0xf4fa0 + PAGE_SIZE - so it mapped the next page) as _PAGE_IOMAP. Since 0x100 is actually a RAM page, and the _PAGE_IOMAP bypasses the P2M lookup we would happily set the PTE to 1000461. Xen would deny the request since we do not have access to the Machine Frame Number (MFN) of 0x100. The P2M[0x100] is for example 0x80140. Fixes-Oracle-Bugzilla: https://bugzilla.oracle.com/bugzilla/show_bug.cgi?id=13665 Acked-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-11KVM: PPC: Emulate dcbfAlexander Graf
commit d3286144c92ec876da9e30320afa875699b7e0f1 upstream. Guests can trigger MMIO exits using dcbf. Since we don't emulate cache incoherent MMIO, just do nothing and move on. Reported-by: Ben Collins <ben.c@servergy.com> Signed-off-by: Alexander Graf <agraf@suse.de> Tested-by: Ben Collins <ben.c@servergy.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Qiang Huang <h.huangqiang@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-11s390/kvm: dont announce RRBM supportChristian Borntraeger
commit 87cac8f879a5ecd7109dbe688087e8810b3364eb upstream. Newer kernels (linux-next with the transparent huge page patches) use rrbm if the feature is announced via feature bit 66. RRBM will cause intercepts, so KVM does not handle it right now, causing an illegal instruction in the guest. The easy solution is to disable the feature bit for the guest. This fixes bugs like: Kernel BUG at 0000000000124c2a [verbose debug info unavailable] illegal operation: 0001 [#1] SMP Modules linked in: virtio_balloon virtio_net ipv6 autofs4 CPU: 0 Not tainted 3.5.4 #1 Process fmempig (pid: 659, task: 000000007b712fd0, ksp: 000000007bed3670) Krnl PSW : 0704d00180000000 0000000000124c2a (pmdp_clear_flush_young+0x5e/0x80) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 EA:3 00000000003cc000 0000000000000004 0000000000000000 0000000079800000 0000000000040000 0000000000000000 000000007bed3918 000000007cf40000 0000000000000001 000003fff7f00000 000003d281a94000 000000007bed383c 000000007bed3918 00000000005ecbf8 00000000002314a6 000000007bed36e0 Krnl Code:>0000000000124c2a: b9810025 ogr %r2,%r5 0000000000124c2e: 41343000 la %r3,0(%r4,%r3) 0000000000124c32: a716fffa brct %r1,124c26 0000000000124c36: b9010022 lngr %r2,%r2 0000000000124c3a: e3d0f0800004 lg %r13,128(%r15) 0000000000124c40: eb22003f000c srlg %r2,%r2,63 [ 2150.713198] Call Trace: [ 2150.713223] ([<00000000002312c4>] page_referenced_one+0x6c/0x27c) [ 2150.713749] [<0000000000233812>] page_referenced+0x32a/0x410 [...] CC: Alex Graf <agraf@suse.de> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Qiang Huang <h.huangqiang@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-11KVM: s390: move kvm_guest_enter,exit closer to sieDominik Dingel
commit 2b29a9fdcb92bfc6b6f4c412d71505869de61a56 upstream. Any uaccess between guest_enter and guest_exit could trigger a page fault, the page fault handler would handle it as a guest fault and translate a user address as guest address. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> CC: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [hq: Backported to 3.4: adjust context] Signed-off-by: Qiang Huang <h.huangqiang@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-11perf/x86: Fix event schedulingPeter Zijlstra
commit 26e61e8939b1fe8729572dabe9a9e97d930dd4f6 upstream. Vince "Super Tester" Weaver reported a new round of syscall fuzzing (Trinity) failures, with perf WARN_ON()s triggering. He also provided traces of the failures. This is I think the relevant bit: > pec_1076_warn-2804 [000] d... 147.926153: x86_pmu_disable: x86_pmu_disable > pec_1076_warn-2804 [000] d... 147.926153: x86_pmu_state: Events: { > pec_1076_warn-2804 [000] d... 147.926156: x86_pmu_state: 0: state: .R config: ffffffffffffffff ( (null)) > pec_1076_warn-2804 [000] d... 147.926158: x86_pmu_state: 33: state: AR config: 0 (ffff88011ac99800) > pec_1076_warn-2804 [000] d... 147.926159: x86_pmu_state: } > pec_1076_warn-2804 [000] d... 147.926160: x86_pmu_state: n_events: 1, n_added: 0, n_txn: 1 > pec_1076_warn-2804 [000] d... 147.926161: x86_pmu_state: Assignment: { > pec_1076_warn-2804 [000] d... 147.926162: x86_pmu_state: 0->33 tag: 1 config: 0 (ffff88011ac99800) > pec_1076_warn-2804 [000] d... 147.926163: x86_pmu_state: } > pec_1076_warn-2804 [000] d... 147.926166: collect_events: Adding event: 1 (ffff880119ec8800) So we add the insn:p event (fd[23]). At this point we should have: n_events = 2, n_added = 1, n_txn = 1 > pec_1076_warn-2804 [000] d... 147.926170: collect_events: Adding event: 0 (ffff8800c9e01800) > pec_1076_warn-2804 [000] d... 147.926172: collect_events: Adding event: 4 (ffff8800cbab2c00) We try and add the {BP,cycles,br_insn} group (fd[3], fd[4], fd[15]). These events are 0:cycles and 4:br_insn, the BP event isn't x86_pmu so that's not visible. group_sched_in() pmu->start_txn() /* nop - BP pmu */ event_sched_in() event->pmu->add() So here we should end up with: 0: n_events = 3, n_added = 2, n_txn = 2 4: n_events = 4, n_added = 3, n_txn = 3 But seeing the below state on x86_pmu_enable(), the must have failed, because the 0 and 4 events aren't there anymore. Looking at group_sched_in(), since the BP is the leader, its event_sched_in() must have succeeded, for otherwise we would not have seen the sibling adds. But since neither 0 or 4 are in the below state; their event_sched_in() must have failed; but I don't see why, the complete state: 0,0,1:p,4 fits perfectly fine on a core2. However, since we try and schedule 4 it means the 0 event must have succeeded! Therefore the 4 event must have failed, its failure will have put group_sched_in() into the fail path, which will call: event_sched_out() event->pmu->del() on 0 and the BP event. Now x86_pmu_del() will reduce n_events; but it will not reduce n_added; giving what we see below: n_event = 2, n_added = 2, n_txn = 2 > pec_1076_warn-2804 [000] d... 147.926177: x86_pmu_enable: x86_pmu_enable > pec_1076_warn-2804 [000] d... 147.926177: x86_pmu_state: Events: { > pec_1076_warn-2804 [000] d... 147.926179: x86_pmu_state: 0: state: .R config: ffffffffffffffff ( (null)) > pec_1076_warn-2804 [000] d... 147.926181: x86_pmu_state: 33: state: AR config: 0 (ffff88011ac99800) > pec_1076_warn-2804 [000] d... 147.926182: x86_pmu_state: } > pec_1076_warn-2804 [000] d... 147.926184: x86_pmu_state: n_events: 2, n_added: 2, n_txn: 2 > pec_1076_warn-2804 [000] d... 147.926184: x86_pmu_state: Assignment: { > pec_1076_warn-2804 [000] d... 147.926186: x86_pmu_state: 0->33 tag: 1 config: 0 (ffff88011ac99800) > pec_1076_warn-2804 [000] d... 147.926188: x86_pmu_state: 1->0 tag: 1 config: 1 (ffff880119ec8800) > pec_1076_warn-2804 [000] d... 147.926188: x86_pmu_state: } > pec_1076_warn-2804 [000] d... 147.926190: x86_pmu_enable: S0: hwc->idx: 33, hwc->last_cpu: 0, hwc->last_tag: 1 hwc->state: 0 So the problem is that x86_pmu_del(), when called from a group_sched_in() that fails (for whatever reason), and without x86_pmu TXN support (because the leader is !x86_pmu), will corrupt the n_added state. Reported-and-Tested-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Stephane Eranian <eranian@google.com> Cc: Dave Jones <davej@redhat.com> Link: http://lkml.kernel.org/r/20140221150312.GF3104@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-11powerpc/crashdump : Fix page frame number check in copy_oldmem_pageLaurent Dufour
commit f5295bd8ea8a65dc5eac608b151386314cb978f1 upstream. In copy_oldmem_page, the current check using max_pfn and min_low_pfn to decide if the page is backed or not, is not valid when the memory layout is not continuous. This happens when running as a QEMU/KVM guest, where RTAS is mapped higher in the memory. In that case max_pfn points to the end of RTAS, and a hole between the end of the kdump kernel and RTAS is not backed by PTEs. As a consequence, the kdump kernel is crashing in copy_oldmem_page when accessing in a direct way the pages in that hole. This fix relies on the memblock's service memblock_is_region_memory to check if the read page is part or not of the directly accessible memory. Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Tested-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-11avr32: Makefile: add '-D__linux__' flag for gcc-4.4.7 useChen Gang
commit 8d80390cfc9434d5aa4fb9e5f9768a66b30cb8a6 upstream. For avr32 cross compiler, do not define '__linux__' internally, so it will cause issue with allmodconfig. The related error: CC [M] fs/coda/psdev.o In file included from include/linux/coda.h:64, from fs/coda/psdev.c:45: include/uapi/linux/coda.h:221: error: expected specifier-qualifier-list before 'u_quad_t' The related toolchain version (which only download, not re-compile): [root@gchen linux-next]# /upstream/toolchain/download/avr32-gnu-toolchain-linux_x86/bin/avr32-gcc -v Using built-in specs. Target: avr32 Configured with: /data2/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/src/gcc/configure --target=avr32 --host=i686-pc-linux-gnu --build=x86_64-pc-linux-gnu --prefix=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86 --enable-languages=c,c++ --disable-nls --disable-libssp --disable-libstdcxx-pch --with-dwarf2 --enable-version-specific-runtime-libs --disable-shared --enable-doc --with-mpfr-lib=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86/lib --with-mpfr-include=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86/include --with-gmp=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86 --with-mpc=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86 --enable-__cxa_atexit --disable-shared --with-newlib --with-pkgversion=AVR_32_bit_GNU_Toolchain_3.4.2_435 --with-bugurl=http://www .atmel.com/avr Thread model: single gcc version 4.4.7 (AVR_32_bit_GNU_Toolchain_3.4.2_435) Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Acked-by: Hans-Christian Egtvedt <hegtvedt@cisco.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-11avr32: fix missing module.h causing build failure in mimc200/fram.cPaul Gortmaker
commit 5745d6a41a4f4aec29e2ccd591c6fb09ed73a955 upstream. Causing this: In file included from arch/avr32/boards/mimc200/fram.c:13: include/linux/miscdevice.h:51: error: field 'list' has incomplete type include/linux/miscdevice.h:55: error: expected specifier-qualifier-list before 'mode_t' arch/avr32/boards/mimc200/fram.c:42: error: 'THIS_MODULE' undeclared here (not in a function) Reported-by: Fengguang Wu <fengguang.wu@intel.com> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-11ARM: 7957/1: add DSB after icache flush in __flush_icache_all()Vinayak Kale
commit 39544ac9df20f73e49fc6b9ac19ff533388c82c0 upstream. Add DSB after icache flush to complete the cache maintenance operation. Signed-off-by: Vinayak Kale <vkale@apm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-11ARM: 7953/1: mm: ensure TLB invalidation is complete before enabling MMUWill Deacon
commit bae0ca2bc550d1ec6a118fb8f2696f18c4da3d8e upstream. During __v{6,7}_setup, we invalidate the TLBs since we are about to enable the MMU on return to head.S. Unfortunately, without a subsequent dsb instruction, the invalidation is not guaranteed to have completed by the time we write to the sctlr, potentially exposing us to junk/stale translations cached in the TLB. This patch reworks the init functions so that the dsb used to ensure completion of cache/predictor maintenance is also used to ensure completion of the TLB invalidation. Reported-by: Albin Tonnerre <Albin.Tonnerre@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-22s390: fix kernel crash due to linkage stack instructionsMartin Schwidefsky
commit 8d7f6690cedb83456edd41c9bd583783f0703bf0 upstream. The kernel currently crashes with a low-address-protection exception if a user space process executes an instruction that tries to use the linkage stack. Set the base-ASTE origin and the subspace-ASTE origin of the dispatchable-unit-control-table to point to a dummy ASTE. Set up control register 15 to point to an empty linkage stack with no room left. A user space process with a linkage stack instruction will still crash but with a different exception which is correctly translated to a segmentation fault instead of a kernel oops. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-22s390/dump: Fix dump memory detectionMichael Holzheu
commit d7736ff5be31edaa4fe5ab62810c64529a24b149 upstream. Dumps created by kdump or zfcpdump can contain invalid memory holes when dumping z/VM systems that have memory pressure. For example: # zgetdump -i /proc/vmcore. Memory map: 0000000000000000 - 0000000000bfffff (12 MB) 0000000000e00000 - 00000000014fffff (7 MB) 000000000bd00000 - 00000000f3bfffff (3711 MB) The memory detection function find_memory_chunks() issues tprot to find valid memory chunks. In case of CMM it can happen that pages are marked as unstable via set_page_unstable() in arch_free_page(). If z/VM has released that pages, tprot returns -EFAULT and indicates a memory hole. So fix this and switch off CMM in case of kdump or zfcpdump. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06powerpc: Make sure "cache" directory is removed when offlining cpuPaul Mackerras
commit 91b973f90c1220d71923e7efe1e61f5329806380 upstream. The code in remove_cache_dir() is supposed to remove the "cache" subdirectory from the sysfs directory for a CPU when that CPU is being offlined. It tries to do this by calling kobject_put() on the kobject for the subdirectory. However, the subdirectory only gets removed once the last reference goes away, and the reference being put here may well not be the last reference. That means that the "cache" subdirectory may still exist when the offlining operation has finished. If the same CPU subsequently gets onlined, the code tries to add a new "cache" subdirectory. If the old subdirectory has not yet been removed, we get a WARN_ON in the sysfs code, with stack trace, and an error message printed on the console. Further, we ultimately end up with an online cpu with no "cache" subdirectory. This fixes it by doing an explicit kobject_del() at the point where we want the subdirectory to go away. kobject_del() removes the sysfs directory even though the object still exists in memory. The object will get freed at some point in the future. A subsequent onlining operation can create a new sysfs directory, even if the old object still exists in memory, without causing any problems. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06KVM: x86: Fix potential divide by 0 in lapic (CVE-2013-6367)Andy Honig
commit b963a22e6d1a266a67e9eecc88134713fd54775c upstream. Under guest controllable circumstances apic_get_tmcct will execute a divide by zero and cause a crash. If the guest cpuid support tsc deadline timers and performs the following sequence of requests the host will crash. - Set the mode to periodic - Set the TMICT to 0 - Set the mode bits to 11 (neither periodic, nor one shot, nor tsc deadline) - Set the TMICT to non-zero. Then the lapic_timer.period will be 0, but the TMICT will not be. If the guest then reads from the TMCCT then the host will perform a divide by 0. This patch ensures that if the lapic_timer.period is 0, then the division does not occur. Reported-by: Andrew Honig <ahonig@google.com> Signed-off-by: Andrew Honig <ahonig@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [bwh: Backported to 3.2: s/kvm_apic_get_reg/apic_get_reg/] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Vinson Lee <vlee@twopensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06ARM: at91: smc: bug fix in sam9_smc_cs_read()Jean-Jacques Hiblot
commit 1588c51cf6d782e63a8719681d905ef0ac22ee62 upstream. There was a copy/paste error when reading the nwe_pulse value. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com> Acked-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-29perf/x86/amd/ibs: Fix waking up from S3 for AMD family 10hRobert Richter
commit bee09ed91cacdbffdbcd3b05de8409c77ec9fcd6 upstream. On AMD family 10h we see following error messages while waking up from S3 for all non-boot CPUs leading to a failed IBS initialization: Enabling non-boot CPUs ... smpboot: Booting Node 0 Processor 1 APIC 0x1 [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu perf: IBS APIC setup failed on cpu #1 process: Switch to broadcast mode on CPU1 CPU1 is up ... ACPI: Waking up from system sleep state S3 Reason for this is that during suspend the LVT offset for the IBS vector gets lost and needs to be reinialized while resuming. The offset is read from the IBSCTL msr. On family 10h the offset needs to be 1 as offset 0 is used for the MCE threshold interrupt, but firmware assings it for IBS to 0 too. The kernel needs to reprogram the vector. The msr is a readonly node msr, but a new value can be written via pci config space access. The reinitialization is implemented for family 10h in setup_ibs_ctl() which is forced during IBS setup. This patch fixes IBS setup after waking up from S3 by adding resume/supend hooks for the boot cpu which does the offset reinitialization. Marking it as stable to let distros pick up this fix. Signed-off-by: Robert Richter <rric@kernel.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1389797849-5565-1-git-send-email-rric.net@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-29KVM: x86: Convert vapic synchronization to _cached functions (CVE-2013-6368)Andy Honig
commit fda4e2e85589191b123d31cdc21fd33ee70f50fd upstream. In kvm_lapic_sync_from_vapic and kvm_lapic_sync_to_vapic there is the potential to corrupt kernel memory if userspace provides an address that is at the end of a page. This patches concerts those functions to use kvm_write_guest_cached and kvm_read_guest_cached. It also checks the vapic_address specified by userspace during ioctl processing and returns an error to userspace if the address is not a valid GPA. This is generally not guest triggerable, because the required write is done by firmware that runs before the guest. Also, it only affects AMD processors and oldish Intel that do not have the FlexPriority feature (unless you disable FlexPriority, of course; then newer processors are also affected). Fixes: b93463aa59d6 ('KVM: Accelerated apic support') Reported-by: Andrew Honig <ahonig@google.com> Cc: stable@vger.kernel.org Signed-off-by: Andrew Honig <ahonig@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [ lizf: backported to 3.4: based on Paolo's backport hints for <3.10 ] Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15x86, fpu, amd: Clear exceptions in AMD FXSAVE workaroundLinus Torvalds
commit 26bef1318adc1b3a530ecc807ef99346db2aa8b0 upstream. Before we do an EMMS in the AMD FXSAVE information leak workaround we need to clear any pending exceptions, otherwise we trap with a floating-point exception inside this code. Reported-by: halfdog <me@halfdog.net> Tested-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/CA%2B55aFxQnY_PCG_n4=0w-VG=YLXL-yr7oMxyy0WU2gCBAf3ydg@mail.gmail.com Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15ARM: shmobile: mackerel: Fix coherent DMA maskLaurent Pinchart
commit b6328a6b7ba57fc84c38248f6f0e387e1170f1a8 upstream. Commit 4dcfa60071b3d23f0181f27d8519f12e37cefbb9 ("ARM: DMA-API: better handing of DMA masks for coherent allocations") added an additional check to the coherent DMA mask that results in an error when the mask is larger than what dma_addr_t can address. Set the LCDC coherent DMA mask to DMA_BIT_MASK(32) instead of ~0 to fix the problem. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15ARM: fix "bad mode in ... handler" message for undefined instructionsRussell King
commit 29c350bf28da333e41e30497b649fe335712a2ab upstream. The array was missing the final entry for the undefined instruction exception handler; this commit adds it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-08sh: always link in helper functions extracted from libgccGeert Uytterhoeven
commit 84ed8a99058e61567f495cc43118344261641c5f upstream. E.g. landisk_defconfig, which has CONFIG_NTFS_FS=m: ERROR: "__ashrdi3" [fs/ntfs/ntfs.ko] undefined! For "lib-y", if no symbols in a compilation unit are referenced by other units, the compilation unit will not be included in vmlinux. This breaks modules that do reference those symbols. Use "obj-y" instead to fix this. http://kisskb.ellerman.id.au/kisskb/buildresult/8838077/ This doesn't fix all cases. There are others, e.g. udivsi3. This is also not limited to sh, many architectures handle this in the same way. A simple solution is to unconditionally include all helper functions. A more complex solution is to make the choice of "lib-y" or "obj-y" depend on CONFIG_MODULES: obj-$(CONFIG_MODULES) += ... lib-y($CONFIG_MODULES) += ... Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Paul Mundt <lethal@linux-sh.org> Tested-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Reviewed-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-08powerpc: Align p_endAnton Blanchard
commit 286e4f90a72c0b0621dde0294af6ed4b0baddabb upstream. p_end is an 8 byte value embedded in the text section. This means it is only 4 byte aligned when it should be 8 byte aligned. Fix this by adding an explicit alignment. This fixes an issue where POWER7 little endian builds with CONFIG_RELOCATABLE=y fail to boot. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-08powerpc: Fix bad stack check in exception entryMichael Neuling
commit 90ff5d688e61f49f23545ffab6228bd7e87e6dc7 upstream. In EXCEPTION_PROLOG_COMMON() we check to see if the stack pointer (r1) is valid when coming from the kernel. If it's not valid, we die but with a nice oops message. Currently we allocate a stack frame (subtract INT_FRAME_SIZE) before we check to see if the stack pointer is negative. Unfortunately, this won't detect a bad stack where r1 is less than INT_FRAME_SIZE. This patch fixes the check to compare the modified r1 with -INT_FRAME_SIZE. With this, bad kernel stack pointers (including NULL pointers) are correctly detected again. Kudos to Paulus for finding this. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-08powerpc: kvm: fix rare but potential deadlock scenepingfan liu
commit 91648ec09c1ef69c4d840ab6dab391bfb452d554 upstream. Since kvmppc_hv_find_lock_hpte() is called from both virtmode and realmode, so it can trigger the deadlock. Suppose the following scene: Two physical cpuM, cpuN, two VM instances A, B, each VM has a group of vcpus. If on cpuM, vcpu_A_1 holds bitlock X (HPTE_V_HVLOCK), then is switched out, and on cpuN, vcpu_A_2 try to lock X in realmode, then cpuN will be caught in realmode for a long time. What makes things even worse if the following happens, On cpuM, bitlockX is hold, on cpuN, Y is hold. vcpu_B_2 try to lock Y on cpuM in realmode vcpu_A_2 try to lock X on cpuN in realmode Oops! deadlock happens Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com> Reviewed-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-20ARM: OMAP2+: hwmod: Fix SOFTRESET logicRoger Quadros
commit 313a76ee11cda6700548afe68499ef174a240688 upstream. In _ocp_softreset(), after _set_softreset() + write_sysconfig(), the hwmod's sysc_cache will always contain SOFTRESET bit set so all further writes to sysconfig using this cache will initiate a repeated SOFTRESET e.g. enable_sysc(). This is true for OMAP3 like platforms that have RESET_DONE status in the SYSSTATUS register and so the the SOFTRESET bit in SYSCONFIG is not automatically cleared. It is not a problem for OMAP4 like platforms that indicate RESET completion by clearing the SOFTRESET bit in the SYSCONFIG register. This repeated SOFTRESET is undesired and was the root cause of USB host issues on OMAP3 platforms when hwmod was allowed to do the SOFTRESET for the USB Host module. To fix this we clear the SOFTRESET bit and update the sysconfig register + sysc_cache using write_sysconfig(). Signed-off-by: Roger Quadros <rogerq@ti.com> Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com> # Panda, BeagleXM [paul@pwsan.com: renamed _clr_softreset() to _clear_softreset()] Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-20x86, efi: Don't use (U)EFI time services on 32 bitMatthew Garrett
commit 04bf9ba720fcc4fa313fa122b799ae0989b6cd50 upstream. UEFI time services are often broken once we're in virtual mode. We were already refusing to use them on 64-bit systems, but it turns out that they're also broken on some 32-bit firmware, including the Dell Venue. Disable them for now, we can revisit once we have the 1:1 mappings code incorporated. Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> Link: http://lkml.kernel.org/r/1385754283-2464-1-git-send-email-matthew.garrett@nebula.com Cc: Matt Fleming <matt.fleming@intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-20ARM: 7913/1: fix framepointer check in unwind_frameKonstantin Khlebnikov
commit 3abb6671a9c04479c4bd026798a05f857393b7e2 upstream. This patch fixes corner case when (fp + 4) overflows unsigned long, for example: fp = 0xFFFFFFFF -> fp + 4 == 3. Signed-off-by: Konstantin Khlebnikov <k.khlebnikov@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-20ARM: 7912/1: check stack pointer in get_wchanKonstantin Khlebnikov
commit 1b15ec7a7427d4188ba91b9bbac696250a059d22 upstream. get_wchan() is lockless. Task may wakeup at any time and change its own stack, thus each next stack frame may be overwritten and filled with random stuff. /proc/$pid/stack interface had been disabled for non-current tasks, see [1] But 'wchan' still allows to trigger stack frame unwinding on volatile stack. This patch fixes oops in unwind_frame() by adding stack pointer validation on each step (as x86 code do), unwind_frame() already checks frame pointer. Also I've found another report of this oops on stackoverflow (irony). Link: http://www.spinics.net/lists/arm-kernel/msg110589.html [1] Link: http://stackoverflow.com/questions/18479894/unwind-frame-cause-a-kernel-paging-error Signed-off-by: Konstantin Khlebnikov <k.khlebnikov@samsung.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-20ARM: OMAP3: hwmod data: Don't prevent RESET of USB Host moduleRoger Quadros
commit 7f4d3641e2548d1ac5dee837ff434df668a2810c upstream. Unlike what the comment states, errata i660 does not state that we can't RESET the USB host module. Instead it states that RESET is the only way to recover from a deadlock situation. RESET ensures that the module is in a known good state irrespective of what bootloader does with the module, so it must be done at boot. Signed-off-by: Roger Quadros <rogerq@ti.com> Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com> # Panda, BeagleXM Fixes: de231388cb80 ("ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP3") Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-20ARM: pxa: tosa: fix keys mappingDmitry Eremin-Solenikov
commit 506cac15ac86f204b83e3cfccde73eeb4e7c5f34 upstream. When converting from tosa-keyboard driver to matrix keyboard, tosa keys received extra 1 column shift. Replace that with correct values to make keyboard work again. Fixes: f69a6548c9d5 ('[ARM] pxa/tosa: make use of the matrix keypad driver') Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-11 16:04:23 +0000