aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2011-04-18Merge branch 'for-39-rc4' of git://codeaurora.org/quic/kernel/davidb/linux-msmLinus Torvalds
* 'for-39-rc4' of git://codeaurora.org/quic/kernel/davidb/linux-msm: msm: timer: fix missing return value msm: Remove extraneous ffa device check
2011-04-18powerpc/powermac: Build fix with SMP and CPU hotplugBenjamin Herrenschmidt
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-18powerpc/perf_event: Skip updating kernel counters if register value shrinksEric B Munson
Because of speculative event roll back, it is possible for some event coutners to decrease between reads on POWER7. This causes a problem with the way that counters are updated. Delta calues are calculated in a 64 bit value and the top 32 bits are masked. If the register value has decreased, this leaves us with a very large positive value added to the kernel counters. This patch protects against this by skipping the update if the delta would be negative. This can lead to a lack of precision in the coutner values, but from my testing the value is typcially fewer than 10 samples at a time. Signed-off-by: Eric B Munson <emunson@mgebm.net> Cc: stable@kernel.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-18powerpc: Don't write protect kernel text with CONFIG_DYNAMIC_FTRACE enabledStefan Roese
This problem was noticed on an MPC855T platform. Ftrace did oops when trying to write to the kernel text segment. Many thanks to Joakim for finding the root cause of this problem. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Joakim Tjernlund <joakim.tjernlund@transmode.se> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-18powerpc: Fix oops if scan_dispatch_log is called too earlyAnton Blanchard
We currently enable interrupts before the dispatch log for the boot cpu is setup. If a timer interrupt comes in early enough we oops in scan_dispatch_log: Unable to handle kernel paging request for data at address 0x00000010 ... .scan_dispatch_log+0xb0/0x170 .account_system_vtime+0xa0/0x220 .irq_enter+0x88/0xc0 .do_IRQ+0x48/0x230 The patch below adds a check to scan_dispatch_log to ensure the dispatch log has been allocated. Signed-off-by: Anton Blanchard <anton@samba.org> Cc: <stable@kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-18powerpc/pseries: Use a kmem cache for DTL buffersNishanth Aravamudan
PAPR specifies that DTL buffers can not cross AMS environments (aka CMO in the PAPR) and can not cross a memory entitlement granule boundary (4k). This is found in section 14.11.3.2 H_REGISTER_VPA of the PAPR. kmalloc does not guarantee an alignment of the allocation, though, beyond 8 bytes (at least in my understanding). Create a special kmem cache for DTL buffers with the alignment requirement. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-18powerpc/kexec: Fix regression causing compile failure on UPPaul Gortmaker
Recent commit b987812b3fcaf70fdf0037589e5d2f5f2453e6ce caused a compile failure on UP because a considerably large block of the file was included within CONFIG_SMP, hence making a stub function not exposed on UP builds when it needed to be. Relocate the stub to the #else /* ! CONFIG_SMP */ section and also annotate the relevant else/endif so that nobody else falls into the same trap I did. Reported-by: Michael Guntsche <mike@it-loops.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-18Merge remote branch 'kumar/merge' into mergeBenjamin Herrenschmidt
2011-04-17Merge branch 's5p-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung * 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: SAMSUNG: Fix warning 's3c_pm_show_resume_irqs' defined but not used ARM: SAMSUNG: Fix build failure in PM CRC check code ARM: S5P: Remove unused s3c_pm_check_resume_pin
2011-04-17alpha: Fix uninitialized value in read_persistent_clock.Richard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-17alpha: Fix RTC interrupt setup.Richard Henderson
Following commit 091738a266fc ("genirq: Remove real old transition functions") we removed an automatic conversion of no_irq_chip to dummy_irq_chip. This change needs to be propagated back into the alpha backend. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-17alpha: Remove set but unused variables.Richard Henderson
This is a new warning in gcc 4.6. Several of these variables are used within #if 0 code, which probably ought to be removed. Most of the changes are legitimate cleanups. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-17alpha: Don't force -Werror.Richard Henderson
There are outstanding gcc 4.6 warnings that need to be cleaned up in the subdirectory. No sense forcing the issue immediately. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-16Merge branch 'usb-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (43 commits) Revert "USB: isp1760-hcd: move imask clear after pending work is done" xHCI: Implement AMD PLL quirk xhci: Tell USB core both roothubs lost power. usbcore: Bug fix: system can't suspend with USB3.0 device connected to USB3.0 hub USB: Fix unplug of device with active streams USB: xhci - also free streams when resetting devices xhci: Fix NULL pointer deref in handle_port_status() USB: xhci - fix math in xhci_get_endpoint_interval() USB: xhci: simplify logic of skipping missed isoc TDs USB: xhci - remove excessive 'inline' markings USB: xhci: unsigned char never equals -1 USB: xhci - fix unsafe macro definitions USB: fix formatting of SuperSpeed endpoints in /proc/bus/usb/devices USB: isp1760-hcd: move imask clear after pending work is done USB: fsl_qe_udc: send ZLP when zero flag and length % maxpacket == 0 usb: qcserial add missing errorpath kfrees usb: qcserial avoid pointing to freed memory usb: Fix qcserial memory leak on rmmod USB: ftdi_sio: add ids for Hameg HO720 and HO730 USB: option: Added support for Samsung GT-B3730/GT-B3710 LTE USB modem. ...
2011-04-16Merge branches 'core-fixes-for-linus', 'perf-fixes-for-linus', ↵Linus Torvalds
'sched-fixes-for-linus', 'timer-fixes-for-linus' and 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: futex: Set FLAGS_HAS_TIMEOUT during futex_wait restart setup * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf_event: Fix cgrp event scheduling bug in perf_enable_on_exec() perf: Fix a build error with some GCC versions * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Fix erroneous all_pinned logic sched: Fix sched-domain avg_load calculation * 'timer-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: RTC: rtc-mrst: follow on to the change of rtc_device_register() RTC: add missing "return 0" in new alarm func for rtc-bfin.c RTC: Fix s3c compile error due to missing s3c_rtc_setpie RTC: Fix early irqs caused by calling rtc_set_alarm too early * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, amd: Disable GartTlbWlkErr when BIOS forgets it x86, NUMA: Fix fakenuma boot failure x86/mrst: Fix boot crash caused by incorrect pin to irq mapping x86/ce4100: Add reg property to bridges
2011-04-15Merge branch 'for-linus' of git://android.git.kernel.org/kernel/tegraLinus Torvalds
* 'for-linus' of git://android.git.kernel.org/kernel/tegra: arm: tegra: fix error check in tegra2_clocks.c ARM: tegra: gpio: Fix unused variable warnings
2011-04-15Merge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6879/1: fix personality test wrt usage of domain handlers ARM: 6878/1: fix personality flag propagation across an exec ARM: 6877/1: the ADDR_NO_RANDOMIZE personality flag should be honored with mmap() ARM: 6876/1: Kconfig.debug: Remove unused CONFIG_DEBUG_ERRORS ARM: pxa: convert incorrect IRQ_TO_IRQ() to irq_to_gpio() ARM: mmp: align NR_BUILTIN_GPIO with gpio interrupt number ARM: pxa: align NR_BUILTIN_GPIO with GPIO interrupt number ARM: pxa: always clear LPM bits for PXA168 MFPR pcmcia: limit pxa2xx_trizeps4 subdriver to trizeps4 platform pcmcia: limit pxa2xx_balloon3 subdriver to balloon3 platform ARM: pxafb: Fix access to nonexistent member of pxafb_info ARM: 6872/1: arch:common:Makefile Remove unused config in the Makefile. ARM: 6868/1: Preserve the VFP state during fork ARM: 6867/1: Introduce THREAD_NOTIFY_COPY for copy_thread() hooks ARM: 6866/1: Do not restrict HIGHPTE to !OUTER_CACHE ARM: 6865/1: perf: ensure pass through zero is counted on overflow ARM: 6864/1: hw_breakpoint: clear DBGVCR out of reset ARM: Only allow PM_SLEEP with CPUs which support suspend ARM: Make consolidated PM sleep code depend on PM_SLEEP
2011-04-15x86, amd: Disable GartTlbWlkErr when BIOS forgets itJoerg Roedel
This patch disables GartTlbWlk errors on AMD Fam10h CPUs if the BIOS forgets to do is (or is just too old). Letting these errors enabled can cause a sync-flood on the CPU causing a reboot. The AMD BKDG recommends disabling GART TLB Wlk Error completely. This patch is the fix for https://bugzilla.kernel.org/show_bug.cgi?id=33012 on my machine. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Link: http://lkml.kernel.org/r/20110415131152.GJ18463@8bytes.org Tested-by: Alexandre Demers <alexandre.f.demers@gmail.com> Cc: <stable@kernel.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-04-15x86, NUMA: Fix fakenuma boot failureKOSAKI Motohiro
Currently, numa=fake boot parameter is broken. If it's used, kernel may panic due to devide by zero error depending on CPU configuration Call Trace: [<ffffffff8104ad4c>] find_busiest_group+0x38c/0xd30 [<ffffffff81086aff>] ? local_clock+0x6f/0x80 [<ffffffff81050533>] load_balance+0xa3/0x600 [<ffffffff81050f53>] idle_balance+0xf3/0x180 [<ffffffff81550092>] schedule+0x722/0x7d0 [<ffffffff81550538>] ? wait_for_common+0x128/0x190 [<ffffffff81550a65>] schedule_timeout+0x265/0x320 [<ffffffff81095815>] ? lock_release_holdtime+0x35/0x1a0 [<ffffffff81550538>] ? wait_for_common+0x128/0x190 [<ffffffff8109bb6c>] ? __lock_release+0x9c/0x1d0 [<ffffffff815534e0>] ? _raw_spin_unlock_irq+0x30/0x40 [<ffffffff815534e0>] ? _raw_spin_unlock_irq+0x30/0x40 [<ffffffff81550540>] wait_for_common+0x130/0x190 [<ffffffff81051920>] ? try_to_wake_up+0x510/0x510 [<ffffffff8155067d>] wait_for_completion+0x1d/0x20 [<ffffffff8107f36c>] kthread_create_on_node+0xac/0x150 [<ffffffff81077bb0>] ? process_scheduled_works+0x40/0x40 [<ffffffff8155045f>] ? wait_for_common+0x4f/0x190 [<ffffffff8107a283>] __alloc_workqueue_key+0x1a3/0x590 [<ffffffff81e0cce2>] cpuset_init_smp+0x6b/0x7b [<ffffffff81df3d07>] kernel_init+0xc3/0x182 [<ffffffff8155d5e4>] kernel_thread_helper+0x4/0x10 [<ffffffff81553cd4>] ? retint_restore_args+0x13/0x13 [<ffffffff81df3c44>] ? start_kernel+0x400/0x400 [<ffffffff8155d5e0>] ? gs_change+0x13/0x13 The divede by zero is caused by the following line, group->cpu_power==0: kernel/sched_fair.c::update_sg_lb_stats() /* Adjust by relative CPU power of the group */ sgs->avg_load = (sgs->group_load * SCHED_LOAD_SCALE) / group->cpu_power; This regression was caused by commit e23bba6044 ("x86-64, NUMA: Unify emulated distance mapping") because it changes cpu -> node mapping in the process of dropping fake_physnodes(). old) all cpus are assinged node 0 now) cpus are assigned round robin (the logic is implemented by numa_init_array()) Note: The change in behavior only happens if the system doesn't have neither ACPI SRAT table nor AMD northbridge NUMA information. Round robin assignment doesn't work because init_numa_sched_groups_power() assumes all logical cpus in the same physical cpu share the same node (then it only accounts for group_first_cpu()), and the simple round robin breaks the above assumption. Thus, this patch implements a reassignment of node-ids if buggy firmware or numa emulation makes wrong cpu node map. Tt enforce all logical cpus in the same physical cpu share the same node. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Shaohui Zheng <shaohui.zheng@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/r/20110415203928.1303.A69D9226@jp.fujitsu.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: Blackfin: SMP: fix cache flush loop Blackfin: time-ts: ack gptimer sooner to avoid missing short ints Blackfin: gptimers: fix thinko when disabling timers Blackfin: SMP: make all barriers handle cache issues
2011-04-14um: disable CONFIG_CMPXCHG_LOCALRichard Weinberger
Commit 8a5ec0ba "Lockless (and preemptless) fastpaths for slub" makes use of this_cpu_cmpxchg_double() which needs this_cpu_cmpxchg16b_emu() on x86_64. Implementing cmpxchg16b emulation for UML would introduce too much complexity. So just disable it. Signed-off-by: Richard Weinberger <richard@nod.at> Reported-by: Sergei Trofimovich <slyich@gmail.com> Acked-by: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-14um: fix call tracer and bug handlerRichard Weinberger
Commit 1de1502c ("x86, um: now we can get rid of trivial uml headers") removed accidentally bug.h which broke UML's call tracer and bug handler. Without asm-generic/bug.h UML uses BUG() from arch/x86/ which makes use of ud2. UML cannot use ud2, it raises SIGILL in user mode. As UML has a different stack for handling signals the call trace will be cut off. Signed-off-by: Richard Weinberger <richard@nod.at> Reported-by: Sergei Trofimovich <slyich@gmail.com> Tested-by: Sergei Trofimovich <slyich@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-14RapidIO/mpc85xx: fix possible mport registration problemsAlexandre Bounine
Fix a possible problem with mport registration left non-cleared after fsl_rio_setup() exits on link error. Abort mport initialization if registration failed. This patch is applicable to 2.6.39-rc1 only. The problem does not exist for earlier versions. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-14ARM: 6879/1: fix personality test wrt usage of domain handlersNicolas Pitre
There are optional bits that may complement a personality ID. It is therefore wrong to simply test against the absolute current->personality value to determine the effective personality. The PER_LINUX_32BIT is itself just PER_LINUX with one of those optional bits set. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-14ARM: 6878/1: fix personality flag propagation across an execNicolas Pitre
Our SET_PERSONALITY() implementation was overwriting all existing personality flags, including ADDR_NO_RANDOMIZE, making them unavailable to processes being exec'd after a call to personality() in user space. This prevents the gdb test suite from running successfully. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-14ARM: 6877/1: the ADDR_NO_RANDOMIZE personality flag should be honored with ↵Nicolas Pitre
mmap() Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-14ARM: 6876/1: Kconfig.debug: Remove unused CONFIG_DEBUG_ERRORSStephen Boyd
This config option isn't actually used anywhere and can be safely removed. The last user was traps.c before commit 082f47a ([ARM] always allow dump_stack() to produce a backtrace, 2007-07-05). Reviewed-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-14ARM: SAMSUNG: Fix warning 's3c_pm_show_resume_irqs' defined but not usedMaurus Cuelenaere
s3c_pm_show_resume_irqs() is used by some s3c_pm_arch_show_resume_irqs() implementations, which get included through mach/pm-core.h. Add __maybe_unused to silence warnings when it isn't used (e.g. on S3C64XX platforms). Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-04-14ARM: SAMSUNG: Fix build failure in PM CRC check codeAbhilash Kesavan
This patch fixes build error that occurs on enabling the Samsung specific PM CRC check code. Missed removing this reference of s3c_sleep_save_phys during move to generic cpu suspend/resume support. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-04-14ARM: S5P: Remove unused s3c_pm_check_resume_pinAbhilash Kesavan
The s3c_pm_check_resume_pin() is not being used and can be safely removed to fix the build warning. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-04-13Blackfin: SMP: fix cache flush loopSonic Zhang
The recent commit (10774912647781) wasn't entirely correct. While it fixed some issues, it introduced others. So pull in the fixes from the public cache flush functions, and document why we need to call things directly ourselves. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-13Blackfin: time-ts: ack gptimer sooner to avoid missing short intsMike Frysinger
If the period of a gptimer is fairly low, we might miss an interrupt by acking it too late (we end up acking the new int as well). Reported-by: Isabelle Leonardi <i.leonardi@detracom.fr> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-13Blackfin: gptimers: fix thinko when disabling timersMike Frysinger
We only want to clear the run bit for this one timer, not all status bits. So don't read the whole reg and then write all the bits back out. Reported-by: Isabelle Leonardi <i.leonardi@detracom.fr> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-13Blackfin: SMP: make all barriers handle cache issuesGraf Yang
When suspending/resuming, the common task freezing code will run in parallel and freeze processes on each core. This is because the code uses the non-smp version of memory barriers (as well it should). The Blackfin smp barrier logic at the moment contains the cache sync logic, but the non-smp barriers do not. This is incorrect as Rafel summarized: > ... > The existing memory barriers are SMP barriers too, but they are more > than _just_ SMP barriers. At least that's how it is _supposed_ to be > (eg. rmb() is supposed to be stronger than smp_rmb()). > ... > However, looking at the blackfin's definitions of SMP barriers I see > that it uses extra stuff that should _also_ be used in the definitions > of the mandatory barriers. > ... URL: http://lkml.org/lkml/2011/4/13/11 LKML-Reference: <BANLkTi=F-C-vwX4PGGfbkdTBw3OWL-twfg@mail.gmail.com> Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-13usb: Fix Kconfig unmet dependencies for Microblaze EHCIMichal Simek
Disable USB_ARCH_HAS_EHCI in arch Kconfig and enable it in usb Kconfig Warning log: warning: (MICROBLAZE) selects USB_ARCH_HAS_EHCI which has unmet direct dependencies (USB_SUPPORT) Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13Merge branch 'fix' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into fixes
2011-04-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/avr32-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/avr32-2.6: avr32: add ATAG_BOARDINFO don't check platform_get_irq's return value against zero avr32: init cannot ignore signals sent by force_sig_info() avr32: fix deadlock when reading clock list in debugfs avr32: Fix .size directive for cpu_enter_idle avr32: At32ap: pio fix typo "))" on gpio_irq_unmask prototype fix the wrong argument of the functions definition
2011-04-13avr32: add ATAG_BOARDINFOAndreas Bießmann
The ATAG_BOARDINFO is intended to hand over the information bd->bi_board_number from u-boot to the kernel. This piece of information can be used to implement some kind of board identification while booting the kernel. Therefore it is placed in .initdata section and can be accessed via the new symbol board_number only while initializing the kernel. Signed-off-by: Andreas Bießmann <biessmann@corscience.de> Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
2011-04-13don't check platform_get_irq's return value against zeroUwe Kleine-König
platform_get_irq returns -ENXIO on failure, so !int_irq was probably always true. Better use (int)int_irq <= 0. Note that a return value of zero is still handled as error even though this could mean irq0. This is a followup to 305b3228f9ff4d59f49e6d34a7034d44ee8ce2f0 that changed the return value of platform_get_irq from 0 to -ENXIO on error. Acked-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
2011-04-13avr32: init cannot ignore signals sent by force_sig_info()Matt Fleming
We can delete the code that checks to see if we're sending an ignored signal to init because force_sig_info() already handles this case. force_sig_info() will kill init even if the signal handler is SIG_DFL and the scenario described in the comment where init might "generate the same exception over and over again" cannot occur (force_sig_info() clears SIGNAL_UNKILLABLE to ensure that init will die). Also, the use of is_global_init() is not correct in the multhreaded case, as Oleg Nesterov explains, "is_global_init() is not right in theory, /sbin/init can be multithreaded. And, this doesn't cover the sub-namespace inits... I'd suggest to check SIGNAL_UNKILLABLE, but looking closer I think you can simply remove this code." It seems this code was copied from arch/powerpc in March 2007 in commit 623b0355d5b1 "[AVR32] Clean up exception handling code" but the code was deleted from arch/powerpc in November 2009 in commit a0592d42fe3e "powerpc: kill the obsolete code under is_global_init()" So catch up with powerpc and delete the bogus code. Signed-off-by: Matt Fleming <matt.fleming@linux.intel.com> Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
2011-04-13avr32: fix deadlock when reading clock list in debugfsOle Henrik Jahren
When writing out /sys/kernel/debug/at32ap_clk, clock list lock is being held while clk_get() is called. clk_get() attempts to take the same lock, which results in deadlock. Introduce and call lock free version, __clk_get(), instead. Signed-off-by: Ole Henrik Jahren <olehenja@alumni.ntnu.no> Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
2011-04-13avr32: Fix .size directive for cpu_enter_idleBen Hutchings
gas used to accept (and ignore?) .size directives which referred to undefined symbols, as this does. In binutils 2.21 these are treated as errors. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
2011-04-13avr32: At32ap: pio fix typo "))" on gpio_irq_unmask prototypeJean-Christophe PLAGNIOL-VILLARD
introduce in commit d75f1bfdbccb Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com> Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
2011-04-13fix the wrong argument of the functions definitionWanlong Gao
The functions of eic_chip's memebers use the wrong argument . Signed-off-by: Wanlong Gao <wanlong.gao@gmail.com> Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
2011-04-12m68k,m68knommu: Wire up name_to_handle_at, open_by_handle_at, clock_adjtime, ↵Geert Uytterhoeven
syncfs Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-13ARM: pxa: convert incorrect IRQ_TO_IRQ() to irq_to_gpio()Eric Miao
This fixes the failure to register the IRQ_RTCAlrm alarm as a wakeup event. It is misinterpreted as a gpio irq not a PWER bitmask. Fixed this by converting the incorrect IRQ_TO_IRQ() to a correct version of irq_to_gpio(). Reported-by: Nick Bane <nickbane1@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-04-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: fix XEN_SAVE_RESTORE Kconfig dependencies PM / Hibernate: Introduce CONFIG_HIBERNATE_CALLBACKS
2011-04-12ARM: mmp: align NR_BUILTIN_GPIO with gpio interrupt numberHaojian Zhuang
Avoid to mismatch between NR_BUILTIN_GPIO and gpio interrupt number. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-04-12ARM: pxa: align NR_BUILTIN_GPIO with GPIO interrupt numberHaojian Zhuang
Avoid to mismatch between NR_BUILTIN_GPIO and GPIO interrupt number Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-04-12ARM: pxa: always clear LPM bits for PXA168 MFPRHaojian Zhuang
Bit[9:7] should always be zero in PXA168. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-21 12:15:52 +0000