aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2009-09-17MIPS: Loongson: pm: clean up the reboot supportWu Zhangjin
Several magic numbers have been replaced by relative macros, which will be more readable and understandable. Signed-off-by: Wu Zhangjin <wuzj@lemote.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17MIPS: Loongson: pm: Remove redundant source codeWu Zhangjin
The implmentation of loongson2e_power_off and loongson2e_halt is almostly the same, just preserve one of them. Signed-off-by: Wu Zhangjin <wuzj@lemote.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17MIPS: Loongson: Add new early_printk implmentationWu Zhangjin
This patch is based on the implementation in the lm2e-fixes branch of Philippe's git://git.linux-cisco.org/linux-mips.git and the malta-specific early_printk implementation. Signed-off-by: Wu Zhangjin <wuzj@lemote.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17MIPS: Loongson: Remove out-of-date board-specific kgdb source codeWu Zhangjin
Since the re-implementation of kgdb by commit 8854700115ecf8aa6f087aa915b7b6cf18090d39 the platform-specific version has become superfluous, remove it. Signed-off-by: Wu Zhangjin <wuzj@lemote.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17MIPS: Loongson: Remove existing early_printk implementationWu Zhangjin
Removes the existing implementation of early_printk for fulong. The old implementation was based on the outdated board-specific dbg_io.c. Since commit 8d60a903d986ffa26c41f0092320a3b9da20bfaf dbg_io.c is not longer needed; it will be removed by the next patch, and a new implementation of early_printk will be added later. Signed-off-by: Wu Zhangjin <wuzj@lemote.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17MIPS: IP22, IP28: Build with -WerrorRalf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17MIPS: FW: Build with -WerrorRalf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17MIPS: Fulong: Convert reset initialization to initcall.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17MIPS: Malta: Convert reset initialization to initcall.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17MIPS: Get rid of duplicate cpu_idle() prototype.Ralf Baechle
Since 2.6.11-rc1 there is a prototype in <linux/smp.h>. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17MIPS: TXx9: Fix error handling.Julia Lawall
Error handling code following a kzalloc should free the allocated data. Error handling code following an ioremap should iounmap the allocated data. The semantic match that finds the first problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,f1,l; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } ( x->f1 = E | (x->f1 == NULL || ...) | f(...,x->f1,...) ) ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17MIPS: TXx9: Disable PM capability of TX493[89] internal etherAtsushi Nemoto
Some TC35815 variants (i.e. TX493[89] internal ether) report existance of PM registers though they are not supported. Disable PM features by clearing pdev->pm_cap. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17MIPS: make page.h constants available to assembly.Nelson Elhage
page.h includes ifndef __ASSEMBLY__ guards, but PAGE_SIZE and some other constants are defined using "1UL", which the assembler does not support. Use the _AC macro from const.h to make them available to assembly (and linker scripts). Signed-off-by: Nelson Elhage <nelhage@ksplice.com> Signed-off-by: Tim Abbott <tabbott@ksplice.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17MIPS: Alchemy: add gpio_request/gpio_free stubs for CONFIG_GPIOLIB=nManuel Lauss
Some drivers use gpio_request/gpio_free regardless of whether gpiolib is actually built; add stubs to work around the ensuing compile failures. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Tested-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17MIPS: Lasat: Fix compilationAlexey Dobriyan
Header needed for current_cpu_data which expands to smp_processor_id(). However, linux/smp.h can't be included into asm/cpu-info.h due to horrible circular dependencies, so plug it here. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17MIPS: Octeon: Check all CCAs in cvmx_write_csr.David Daney
The current code only checks CCA of 0 when deciding if a dummy read is needed. Since the kernel can (and does) use other CCAs we need to mask out the CCA bits from the address. Since the address constant now fits in 16 bits, there is an added benefit that smaller code is generated. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17MIPS: Fix potencial build error in <asm/delay.h>Ralf Baechle
<asm/delay.h> will break if HZ isn't defined. In 2.6.26 and later we're usually lucky ... Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (75 commits) Blackfin: update ftrace for latest toolchain Blackfin: fix elf_fpregset_t definition Blackfin: unify cache init functions Blackfin: swap clocksource ratings for gptimer/cycles Blackfin: update ftrace_push_return_trace() breakage Blackfin: update cm board resources Blackfin: cm-bf537u: split board from cm-bf537e Blackfin: bf538-ezkit: add SPI IRQ resources Blackfin: increase default async timings for parallel flashes Blackfin: add ICPLB coverage for async banks Blackfin: use KERN_ALERT in all kgdb_test output Blackfin: fix BF54x SPI CS resources Blackfin: fix typo in isram_write() Blackfin: bf537-stamp: add adp5588 gpio resources Blackfin: add some isram-driver self tests Blackfin: workaround anomaly 05000283 Blackfin: fix spelling in a few comments Blackfin: use raw_smp_processor_id() in exception code Blackfin: remove useless duplicated assignment in gpio code Blackfin: Fix link errors with binutils 2.19 and GCC 4.3 ...
2009-09-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (53 commits) m68knommu: Make PAGE_SIZE available to assembly files. m68knommu: fix ColdFire definition of CLOCK_TICK_RATE m68knommu: set multi-function pins for ethernet when enabled m68knommu: remove special interrupt handling code for ne2k support m68knommu: relax IO_SPACE_LIMIT setting m68knommu: remove ColdFire direct interrupt register access m68knommu: create a speciailized ColdFire 5272 interrupt controller m68knommu: add support for second interrupt controller of ColdFire 5249 m68knommu: clean up old ColdFire timer irq setup m68knommu: map ColdFire interrupts to correct masking bits m68knommu: clean up ColdFire 532x CPU timer setup m68knommu: simplify ColdFire "timers" clock initialization m68knommu: support code to mask external interrupts on old ColdFire CPU's m68knommu: merge old ColdFire interrupt controller masking macros m68knommu: remove duplicate ColdFire mcf_autovector() code m68knommu: move ColdFire INTC definitions to new include file m68knommu: mask off all interrupts in ColdFire intc-simr controller m68knommu: remove timer device interrupt setup for ColdFire 532x m68knommu: remove interrupt masking from ColdFire pit timer m68knommu: remove unecessary interrupt level setting in ColdFire 520x setup ...
2009-09-16Blackfin: update ftrace for latest toolchainYi Li
The mcount support that was finally added to the Blackfin gcc port isn't exactly the same as what ftrace was developed against. Now that the final gcc version is in place, update the ftrace code to match. While updating this, fix the swapped arguments to the tracer (signature is (ip, parent_ip) while we were passing (parent_ip, ip)). Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: fix elf_fpregset_t definitionMike Frysinger
The elf_fpregset_t type relied on an empty struct in the asm/user.h, but the transition to asm-generic/user.h dropped that empty struct. Rather than restore this useless struct, define the only user (elf_fpregset_t) as an empty struct itself. This fixes building when ELF dump support is enabled. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: unify cache init functionsMike Frysinger
The CPLB implementations (mpu/nompu) had exact copies of the cacheinit code. Even the i/d cache functions are largely the same. So unify them both in the common kernel cache code. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: swap clocksource ratings for gptimer/cyclesGraf Yang
The cycles clocksource is a higher resolution than the gptimer one, so make sure the ratings field reflects this. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: update ftrace_push_return_trace() breakageMike Frysinger
Commit 71e308a239c updated ftrace_push_return_trace() prototype but didn't update the Blackfin ftrace code, so things broke. Since we don't support the new stuff yet, call it with stub values. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: update cm board resourcesHarald Krapfenbauer
Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: cm-bf537u: split board from cm-bf537eHarald Krapfenbauer
The cm-bf537u module, while similar to the cm-bf537e, is different enough to warrant its own resources. It has a USB controller but no PHY. Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: bf538-ezkit: add SPI IRQ resourcesBarry Song
Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: increase default async timings for parallel flashesSonic Zhang
The default async timings are a little too fast for the parallel flash that is attached by default to the async banks. So slow things down a bit so accessing the hardware is stable. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: add ICPLB coverage for async banksBernd Schmidt
When doing XIP, we need to execute out of the async banks, so we need ICPLBs to allow this. Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: use KERN_ALERT in all kgdb_test outputMingquan Pan
Most messages are already using KERN_ALERT, so be consistent to make things easier to check with test scripts. Signed-off-by: Mingquan Pan <grace.pan@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: fix BF54x SPI CS resourcesYi Li
The BF54x has three slave select signals for SPI0/SPI1, not eight. Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: fix typo in isram_write()Robin Getz
The DTEST write bit is 2, not 1. Improve comments in the related macro while we're here. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: bf537-stamp: add adp5588 gpio resourcesMichael Hennerich
For the adp5588 GPIO daughter card. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: add some isram-driver self testsMike Frysinger
Make it easy to figure out if code changes here are correct. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: workaround anomaly 05000283Robin Getz
Make sure our interrupt entry code with exact hardware errors handles anomaly 05000283 (infinite stall in system MMR kill) so we don't stall while under load. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: fix spelling in a few commentsMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: use raw_smp_processor_id() in exception codeYi Li
When preempt debugging is enabled, smp_processor_id() may utilize the "current" structure. This may not be safe to access under all exceptions due to it being in dynamically allocated memory. So in exception code, make sure we use raw_smp_processor_id() instead to get at the real value directly. Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: remove useless duplicated assignment in gpio codeMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: Fix link errors with binutils 2.19 and GCC 4.3Ingo Molnar
Not sure whether this has been reported/fixed before. Today I built a Blackfin tool-chain from scratch for -tip testing, and it triggers: arch/blackfin/kernel/vmlinux.lds:1238: undefined section `.data_a_l1' referenced in expression and: arch/blackfin/kernel/vmlinux.lds:1238: undefined section `.text_data_l1' referenced in expression Now i dont have any way to test this linker script, but it now at least builds fine after fixing what appears to be typos in those assert statements. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: handle the core timer interrupt with handle_percpu_irq on SMPGraf Yang
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: optimize fixed code handling for the most common caseMike Frysinger
The majority of the time we are returning to user space, it is not in the fixed atomic code region. So rather than branch to a function where we check the PC and return, do the check inline and branch only when needed. Also, tweak some of the fixed code handling based on assumptions we are aware of but cannot be expressed in C. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: delete '-spi' suffix in ad1836/ad1938 driver nameBarry Song
The ASoC drivers have dropped the redundant "-spi" suffix in the driver name, so update the board resources accordingly. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: punt dead cache locking codeMike Frysinger
No one uses these functions, and some are duplicate of existing C code. So just punt the whole thing. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: drop board resources for dead devices (pbx/ad9960)Mike Frysinger
These hardware devices are dead and the drivers never cleaned up/merged, so punt the useless board resource info. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: do not trace the exception handlerYi Li
Since the exception handler cannot cause exceptions, we cannot trace it without easily causing double faults and crashing the system. Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: fix BF522/BF523 max VCO mixupMike Frysinger
The BF522 and BF523 had their real max VCO values swapped. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: SMP port does not yet support cpu frequency scalingGraf Yang
We have an item to get this fixed, but in the mean time, disable selection via Kconfig dependencies. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: cleanup sync handling when enabling/disabling cplbsYi Li
The handling of updating the [DI]MEM_CONTROL MMRs does not follow proper sync procedures as laid out in the Blackfin programming manual. So rather than audit/fix every call location, create helper functions that do the right things in order to safely update these MMRs. Then convert all call sites to use these new helper functions. While we're fixing the code, drop the workaround for anomaly 05000125 as that anomaly applies to old versions of silicon that we do not support. Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: bf537-stamp: update ad1836 resourcesBarry Song
Update the ad1836 resources for the new ASoC driver. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: update anomaly listsYi Li
Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-20 00:05:17 +0000