aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2012-02-03ARM: 7296/1: proc-v7.S: remove HARVARD_CACHE preprocessor guardsWill Deacon
commit 612539e81f655f6ac73c7af1da8701c1ee618aee upstream. On v7, we use the same cache maintenance instructions for data lines as for unified lines. This was not the case for v6, where HARVARD_CACHE was defined to indicate the L1 cache topology. This patch removes the erroneous compile-time check for HARVARD_CACHE in proc-v7.S, ensuring that we perform I-side invalidation at boot. Reported-and-Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Catalin Marinas <Catalin.Marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-03mach-ux500: enable ARM errata 764369Srinidhi KASAGAR
commit d65015f7c5c5be9fd3f5e567889c844ba81bdc9c upstream. This applies ARM errata 764369 for all ux500 platforms. Signed-off-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-03x86/microcode_amd: Add support for CPU family specific container filesAndreas Herrmann
commit 5b68edc91cdc972c46f76f85eded7ffddc3ff5c2 upstream. We've decided to provide CPU family specific container files (starting with CPU family 15h). E.g. for family 15h we have to load microcode_amd_fam15h.bin instead of microcode_amd.bin Rationale is that starting with family 15h patch size is larger than 2KB which was hard coded as maximum patch size in various microcode loaders (not just Linux). Container files which include patches larger than 2KB cause different kinds of trouble with such old patch loaders. Thus we have to ensure that the default container file provides only patches with size less than 2KB. Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: <stable@kernel.org> Link: http://lkml.kernel.org/r/20120120164412.GD24508@alberich.amd.com [ documented the naming convention and tidied the code a bit. ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-03x86/uv: Fix uv_gpa_to_soc_phys_ram() shiftRuss Anderson
commit 5a51467b146ab7948d2f6812892eac120a30529c upstream. uv_gpa_to_soc_phys_ram() was inadvertently ignoring the shift values. This fix takes the shift into account. Signed-off-by: Russ Anderson <rja@sgi.com> Link: http://lkml.kernel.org/r/20120119020753.GA7228@sgi.com Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-25score: fix off-by-one index into syscall tableDan Rosenberg
commit c25a785d6647984505fa165b5cd84cfc9a95970b upstream. If the provided system call number is equal to __NR_syscalls, the current check will pass and a function pointer just after the system call table may be called, since sys_call_table is an array with total size __NR_syscalls. Whether or not this is a security bug depends on what the compiler puts immediately after the system call table. It's likely that this won't do anything bad because there is an additional NULL check on the syscall entry, but if there happens to be a non-NULL value immediately after the system call table, this may result in local privilege escalation. Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com> Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Eugene Teo <eugeneteo@kernel.sg> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25x86/UV2: Fix BAU destination timeout initializationCliff Wickman
commit d059f9fa84a30e04279c6ff615e9e2cf3b260191 upstream. Move the call to enable_timeouts() forward so that BAU_MISC_CONTROL is initialized before using it in calculate_destination_timeout(). Fix the calculation of a BAU destination timeout for UV2 (in calculate_destination_timeout()). Signed-off-by: Cliff Wickman <cpw@sgi.com> Link: http://lkml.kernel.org/r/20120116211848.GB5767@sgi.com Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25ACPI, ia64: Use SRAT table rev to use 8bit or 16/32bit PXM fields (ia64)Kurt Garloff
commit 9f10f6a520deb3639fac78d81151a3ade88b4e7f upstream. In SRAT v1, we had 8bit proximity domain (PXM) fields; SRAT v2 provides 32bits for these. The new fields were reserved before. According to the ACPI spec, the OS must disregrard reserved fields. ia64 did handle the PXM fields almost consistently, but depending on sgi's sn2 platform. This patch leaves the sn2 logic in, but does also use 16/32 bits for PXM if the SRAT has rev 2 or higher. The patch also adds __init to the two pxm accessor functions, as they access __initdata now and are called from an __init function only anyway. Note that the code only uses 16 bits for the PXM field in the processor proximity field; the patch does not address this as 16 bits are more than enough. Signed-off-by: Kurt Garloff <kurt@garloff.de> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25ACPI, x86: Use SRAT table rev to use 8bit or 32bit PXM fields (x86/x86-64)Kurt Garloff
commit cd298f60a2451a16e0f077404bf69b62ec868733 upstream. In SRAT v1, we had 8bit proximity domain (PXM) fields; SRAT v2 provides 32bits for these. The new fields were reserved before. According to the ACPI spec, the OS must disregrard reserved fields. x86/x86-64 was rather inconsistent prior to this patch; it used 8 bits for the pxm field in cpu_affinity, but 32 bits in mem_affinity. This patch makes it consistent: Either use 8 bits consistently (SRAT rev 1 or lower) or 32 bits (SRAT rev 2 or higher). cc: x86@kernel.org Signed-off-by: Kurt Garloff <kurt@garloff.de> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25x86, UV: Update Boot messages for SGI UV2 platformJack Steiner
commit da517a08ac5913cd80ce3507cddd00f2a091b13c upstream. SGI UV systems print a message during boot: UV: Found <num> blades Due to packaging changes, the blade count is not accurate for on the next generation of the platform. This patch corrects the count. Signed-off-by: Jack Steiner <steiner@sgi.com> Link: http://lkml.kernel.org/r/20120106191900.GA19772@sgi.com Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25x86: Fix mmap random address rangeLudwig Nussel
commit 9af0c7a6fa860698d080481f24a342ba74b68982 upstream. On x86_32 casting the unsigned int result of get_random_int() to long may result in a negative value. On x86_32 the range of mmap_rnd() therefore was -255 to 255. The 32bit mode on x86_64 used 0 to 255 as intended. The bug was introduced by 675a081 ("x86: unify mmap_{32|64}.c") in January 2008. Signed-off-by: Ludwig Nussel <ludwig.nussel@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: harvey.harrison@gmail.com Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/201111152246.pAFMklOB028527@wpaz5.hot.corp.google.com Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25x86/PCI: build amd_bus.o only when CONFIG_AMD_NB=yBjorn Helgaas
commit 5cf9a4e69c1ff0ccdd1d2b7404f95c0531355274 upstream. We only need amd_bus.o for AMD systems with PCI. arch/x86/pci/Makefile already depends on CONFIG_PCI=y, so this patch just adds the dependency on CONFIG_AMD_NB. Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25x86/PCI: amd: factor out MMCONFIG discoveryBjorn Helgaas
commit 24d25dbfa63c376323096660bfa9ad45a08870ce upstream. This factors out the AMD native MMCONFIG discovery so we can use it outside amd_bus.c. amd_bus.c reads AMD MSRs so it can remove the MMCONFIG area from the PCI resources. We may also need the MMCONFIG information to work around BIOS defects in the ACPI MCFG table. Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25x86/PCI: Ignore CPU non-addressable _CRS reserved memory resourcesGary Hade
commit ae5cd86455381282ece162966183d3f208c6fad7 upstream. This assures that a _CRS reserved host bridge window or window region is not used if it is not addressable by the CPU. The new code either trims the window to exclude the non-addressable portion or totally ignores the window if the entire window is non-addressable. The current code has been shown to be problematic with 32-bit non-PAE kernels on systems where _CRS reserves resources above 4GB. Signed-off-by: Gary Hade <garyhade@us.ibm.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Thomas Renninger <trenn@novell.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-12powerpc: Fix unpaired probe_hcall_entry and probe_hcall_exitLi Zhong
commit e4f387d8db3ba3c2dae4d8bdfe7bb5f4fe1bcb0d upstream. Unpaired calling of probe_hcall_entry and probe_hcall_exit might happen as following, which could cause incorrect preempt count. __trace_hcall_entry => trace_hcall_entry -> probe_hcall_entry => get_cpu_var => preempt_disable __trace_hcall_exit => trace_hcall_exit -> probe_hcall_exit => put_cpu_var => preempt_enable where: A => B and A -> B means A calls B, but => means A will call B through function name, and B will definitely be called. -> means A will call B through function pointer, so B might not be called if the function pointer is not set. So error happens when only one of probe_hcall_entry and probe_hcall_exit get called during a hcall. This patch tries to move the preempt count operations from probe_hcall_entry and probe_hcall_exit to its callers. Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-12powerpc/time: Handle wrapping of decrementerAnton Blanchard
commit 37fb9a0231ee43d42d069863bdfd567fca2b61af upstream. When re-enabling interrupts we have code to handle edge sensitive decrementers by resetting the decrementer to 1 whenever it is negative. If interrupts were disabled long enough that the decrementer wrapped to positive we do nothing. This means interrupts can be delayed for a long time until it finally goes negative again. While we hope interrupts are never be disabled long enough for the decrementer to go positive, we have a very good test team that can drive any kernel into the ground. The softlockup data we get back from these fails could be seconds in the future, completely missing the cause of the lockup. We already keep track of the timebase of the next event so use that to work out if we should trigger a decrementer exception. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-06net: bpf_jit: fix an off-one bug in x86_64 cond jump targetMarkus Kötter
[ Upstream commit a03ffcf873fe0f2565386ca8ef832144c42e67fa ] x86 jump instruction size is 2 or 5 bytes (near/long jump), not 2 or 6 bytes. In case a conditional jump is followed by a long jump, conditional jump target is one byte past the start of target instruction. Signed-off-by: Markus Kötter <nepenthesdev@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-06sparc: Fix handling of orig_i0 wrt. debugging when restarting syscalls.David S. Miller
[ A combination of upstream commits 1d299bc7732c34d85bd43ac1a8745f5a2fed2078 and e88d2468718b0789b4c33da2f7e1cef2a1eee279 ] Although we provide a proper way for a debugger to control whether syscall restart occurs, we run into problems because orig_i0 is not saved and restored properly. Luckily we can solve this problem without having to make debuggers aware of the issue. Across system calls, several registers are considered volatile and can be safely clobbered. Therefore we use the pt_regs save area of one of those registers, %g6, as a place to save and restore orig_i0. Debuggers transparently will do the right thing because they save and restore this register already. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-06sparc64: Fix masking and shifting in VIS fpcmp emulation.David S. Miller
[ Upstream commit 2e8ecdc008a16b9a6c4b9628bb64d0d1c05f9f92 ] Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-06sparc32: Correct the return value of memcpy.David S. Miller
[ Upstream commit a52312b88c8103e965979a79a07f6b34af82ca4b ] Properly return the original destination buffer pointer. Signed-off-by: David S. Miller <davem@davemloft.net> Tested-by: Kjetil Oftedal <oftedal@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-06sparc32: Remove uses of %g7 in memcpy implementation.David S. Miller
[ Upstream commit 21f74d361dfd6a7d0e47574e315f780d8172084a ] This is setting things up so that we can correct the return value, so that it properly returns the original destination buffer pointer. Signed-off-by: David S. Miller <davem@davemloft.net> Tested-by: Kjetil Oftedal <oftedal@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-06sparc32: Remove non-kernel code from memcpy implementation.David S. Miller
[ Upstream commit 045b7de9ca0cf09f1adc3efa467f668b89238390 ] Signed-off-by: David S. Miller <davem@davemloft.net> Tested-by: Kjetil Oftedal <oftedal@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-06sparc: Kill custom io_remap_pfn_range().David S. Miller
[ Upstream commit 3e37fd3153ac95088a74f5e7c569f7567e9f993a ] To handle the large physical addresses, just make a simple wrapper around remap_pfn_range() like MIPS does. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-06sparc64: Patch sun4v code sequences properly on module load.David S. Miller
[ Upstream commit 0b64120cceb86e93cb1bda0dc055f13016646907 ] Some of the sun4v code patching occurs in inline functions visible to, and usable by, modules. Therefore we have to patch them up during module load. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-06sparc32: Be less strict in matching %lo part of relocation.David S. Miller
[ Upstream commit b1f44e13a525d2ffb7d5afe2273b7169d6f2222e ] The "(insn & 0x01800000) != 0x01800000" test matches 'restore' but that is a legitimate place to see the %lo() part of a 32-bit symbol relocation, particularly in tail calls. Signed-off-by: David S. Miller <davem@davemloft.net> Tested-by: Sergei Trofimovich <slyfox@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-06sparc64: Fix MSIQ HV call ordering in pci_sun4v_msiq_build_irq().David S. Miller
[ Upstream commit 7cc8583372a21d98a23b703ad96cab03180b5030 ] This silently was working for many years and stopped working on Niagara-T3 machines. We need to set the MSIQ to VALID before we can set it's state to IDLE. On Niagara-T3, setting the state to IDLE first was causing HV_EINVAL errors. The hypervisor documentation says, rather ambiguously, that the MSIQ must be "initialized" before one can set the state. I previously understood this to mean merely that a successful setconf() operation has been performed on the MSIQ, which we have done at this point. But it seems to also mean that it has been set VALID too. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-06oprofile, arm/sh: Fix oprofile_arch_exit() linkage issueVladimir Zapolskiy
commit 55205c916e179e09773d98d290334d319f45ac6b upstream. This change fixes a linking problem, which happens if oprofile is selected to be compiled as built-in: `oprofile_arch_exit' referenced in section `.init.text' of arch/arm/oprofile/built-in.o: defined in discarded section `.exit.text' of arch/arm/oprofile/built-in.o The problem is appeared after commit 87121ca504, which introduced oprofile_arch_exit() calls from __init function. Note that the aforementioned commit has been backported to stable branches, and the problem is known to be reproduced at least with 3.0.13 and 3.1.5 kernels. Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@nokia.com> Signed-off-by: Robert Richter <robert.richter@amd.com> Cc: Will Deacon <will.deacon@arm.com> Cc: oprofile-list <oprofile-list@lists.sourceforge.net> Link: http://lkml.kernel.org/r/20111222151540.GB16765@erda.amd.com Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-06ARM:imx:fix pwm period valueJason Chen
commit 5776ac2eb33164c77cdb4d2b48feee15616eaba3 upstream. According to imx pwm RM, the real period value should be PERIOD value in PWMPR plus 2. PWMO (Hz) = PCLK(Hz) / (period +2) Signed-off-by: Jason Chen <jason.chen@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-06oprofile: Fix uninitialized memory access when writing to writing to oprofilefsRobert Richter
commit 913050b91eb94f194392dd797b1ff3779f606ac0 upstream. If oprofilefs_ulong_from_user() is called with count equals zero, *val remains unchanged. Depending on the implementation it might be uninitialized. Change oprofilefs_ulong_from_user()'s interface to return count on success. Thus, we are able to return early if count equals zero which avoids using *val uninitialized. Fixing all users of oprofilefs_ulong_ from_user(). This follows write syscall implementation when count is zero: "If count is zero ... [and if] no errors are detected, 0 will be returned without causing any other effect." (man 2 write) Reported-By: Mike Waychison <mikew@google.com> Signed-off-by: Robert Richter <robert.richter@amd.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: oprofile-list <oprofile-list@lists.sourceforge.net> Link: http://lkml.kernel.org/r/20111219153830.GH16765@erda.amd.com Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-06MXC PWM: should active during DOZE/WAIT/DBG modeJason Chen
commit c0d96aed8c6dd925afe9ea35491a0cd458642a86 upstream. Signed-off-by: Jason Chen <jason.chen@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-06ARM: OMAP: rx51: fix USBFelipe Contreras
commit e5fe29c7198a1f6616286dfc8602a69da165cb3f upstream. Commit 10299e2e4e3ed3b16503d4e04edd48b33083f4e2 (ARM: RX-51: Enable isp1704 power on/off) added power management for isp1704. However, the transceiver should be powered on by default, otherwise USB doesn't work at all for networking during boot. All kernels after v3.0 are affected. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Reviewed-by: Sebastian Reichel <sre@debian.org> [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-21xen: only limit memory map to maximum reservation for domain 0.Ian Campbell
commit d3db728125c4470a2d061ac10fa7395e18237263 upstream. d312ae878b6a "xen: use maximum reservation to limit amount of usable RAM" clamped the total amount of RAM to the current maximum reservation. This is correct for dom0 but is not correct for guest domains. In order to boot a guest "pre-ballooned" (e.g. with memory=1G but maxmem=2G) in order to allow for future memory expansion the guest must derive max_pfn from the e820 provided by the toolstack and not the current maximum reservation (which can reflect only the current maximum, not the guest lifetime max). The existing algorithm already behaves this correctly if we do not artificially limit the maximum number of pages for the guest case. For a guest booted with maxmem=512, memory=128 this results in: [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved) -[ 0.000000] Xen: 0000000000100000 - 0000000008100000 (usable) -[ 0.000000] Xen: 0000000008100000 - 0000000020800000 (unusable) +[ 0.000000] Xen: 0000000000100000 - 0000000020800000 (usable) ... [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI not present or invalid. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) -[ 0.000000] last_pfn = 0x8100 max_arch_pfn = 0x1000000 +[ 0.000000] last_pfn = 0x20800 max_arch_pfn = 0x1000000 [ 0.000000] initial memory mapped : 0 - 027ff000 [ 0.000000] Base memory trampoline at [c009f000] 9f000 size 4096 -[ 0.000000] init_memory_mapping: 0000000000000000-0000000008100000 -[ 0.000000] 0000000000 - 0008100000 page 4k -[ 0.000000] kernel direct mapping tables up to 8100000 @ 27bb000-27ff000 +[ 0.000000] init_memory_mapping: 0000000000000000-0000000020800000 +[ 0.000000] 0000000000 - 0020800000 page 4k +[ 0.000000] kernel direct mapping tables up to 20800000 @ 26f8000-27ff000 [ 0.000000] xen: setting RW the range 27e8000 - 27ff000 [ 0.000000] 0MB HIGHMEM available. -[ 0.000000] 129MB LOWMEM available. -[ 0.000000] mapped low ram: 0 - 08100000 -[ 0.000000] low ram: 0 - 08100000 +[ 0.000000] 520MB LOWMEM available. +[ 0.000000] mapped low ram: 0 - 20800000 +[ 0.000000] low ram: 0 - 20800000 With this change "xl mem-set <domain> 512M" will successfully increase the guest RAM (by reducing the balloon). There is no change for dom0. Reported-and-Tested-by: George Shuklin <george.shuklin@gmail.com> Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-21x86, hpet: Immediately disable HPET timer 1 if rtc irq is maskedMark Langsdorf
commit 2ded6e6a94c98ea453a156748cb7fabaf39a76b9 upstream. When HPET is operating in RTC mode, the TN_ENABLE bit on timer1 controls whether the HPET or the RTC delivers interrupts to irq8. When the system goes into suspend, the RTC driver sends a signal to the HPET driver so that the HPET releases control of irq8, allowing the RTC to wake the system from suspend. The switchover is accomplished by a write to the HPET configuration registers which currently only occurs while servicing the HPET interrupt. On some systems, I have seen the system suspend before an HPET interrupt occurs, preventing the write to the HPET configuration register and leaving the HPET in control of the irq8. As the HPET is not active during suspend, it does not generate a wake signal and RTC alarms do not work. This patch forces the HPET driver to immediately transfer control of the irq8 channel to the RTC instead of waiting until the next interrupt event. Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com> Link: http://lkml.kernel.org/r/20111118153306.GB16319@alberich.amd.com Tested-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-21thp: add compound tail page _mapcount when mappedYouquan Song
commit b6999b19120931ede364fa3b685e698a61fed31d upstream. With the 3.2-rc kernel, IOMMU 2M pages in KVM works. But when I tried to use IOMMU 1GB pages in KVM, I encountered an oops and the 1GB page failed to be used. The root cause is that 1GB page allocation calls gup_huge_pud() while 2M page calls gup_huge_pmd. If compound pages are used and the page is a tail page, gup_huge_pmd() increases _mapcount to record tail page are mapped while gup_huge_pud does not do that. So when the mapped page is relesed, it will result in kernel oops because the page is not marked mapped. This patch add tail process for compound page in 1GB huge page which keeps the same process as 2M page. Reproduce like: 1. Add grub boot option: hugepagesz=1G hugepages=8 2. mount -t hugetlbfs -o pagesize=1G hugetlbfs /dev/hugepages 3. qemu-kvm -m 2048 -hda os-kvm.img -cpu kvm64 -smp 4 -mem-path /dev/hugepages -net none -device pci-assign,host=07:00.1 kernel BUG at mm/swap.c:114! invalid opcode: 0000 [#1] SMP Call Trace: put_page+0x15/0x37 kvm_release_pfn_clean+0x31/0x36 kvm_iommu_put_pages+0x94/0xb1 kvm_iommu_unmap_memslots+0x80/0xb6 kvm_assign_device+0xba/0x117 kvm_vm_ioctl_assigned_device+0x301/0xa47 kvm_vm_ioctl+0x36c/0x3a2 do_vfs_ioctl+0x49e/0x4e4 sys_ioctl+0x5a/0x7c system_call_fastpath+0x16/0x1b RIP put_compound_page+0xd4/0x168 Signed-off-by: Youquan Song <youquan.song@intel.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-21ARM: davinci: dm646x evm: wrong register used in setup_vpif_input_channel_modeHans Verkuil
commit 83713fc9373be2e943f82e9d36213708c6b0050e upstream. The function setup_vpif_input_channel_mode() used the VSCLKDIS register instead of VIDCLKCTL. This meant that when in HD mode videoport channel 0 used a different clock from channel 1. Clearly a copy-and-paste error. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Manjunath Hadli <manjunath.hadli@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-21ARM: at91: fix clock conid for atmel_tcb.1 on 9260/9g20Jean-Christophe PLAGNIOL-VILLARD
commit 1808958d27b1250295f01dff4997d8a8814adaab upstream. The conid is supposed to be t0/t1/t2_clk. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-21arm: mx23: recognise stmp378x as mx23Wolfram Sang
commit 11357be9246c7d1acf9b37ad54a18b29bbb734be upstream. Adding the machine_is_* line was forgotten when converting mach-stmp378x to mach-mxs. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-21ARM: davinci: da850 evm: change audio edma event queue to EVENTQ_0Manjunathappa, Prakash
commit f1b21c525693b0159aed83b5871f2d0f077f208e upstream. On OMAP-L138 platform, EDMA event queue 0 should be used for audio transfers so that they are not starved by video data moving on event queue 1. Commit 48519f0ae03bc7e86b3dc93e56f1334d53803770 (ASoC: davinci: let platform data define edma queue numbers) had a side-effect of changing this behavior by making the driver actually honor the platform data passed. Fix this now by passing event queue 0 as the queue to be used for audio transfers. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09add missing .set function for NT_S390_LAST_BREAK regsetMartin Schwidefsky
commit b934069c991355d27a053a932591c77960f4e414 upstream. The last breaking event address is a read-only value, the regset misses the .set function. If a PTRACE_SETREGSET is done for NT_S390_LAST_BREAK we get an oops due to a branch to zero: Kernel BUG at 0000000000000002 verbose debug info unavailable illegal operation: 0001 #1 SMP ... Call Trace: (<0000000000158294> ptrace_regset+0x184/0x188) <00000000001595b6> ptrace_request+0x37a/0x4fc <0000000000109a78> arch_ptrace+0x108/0x1fc <00000000001590d6> SyS_ptrace+0xaa/0x12c <00000000005c7a42> sysc_noemu+0x16/0x1c <000003fffd5ec10c> 0x3fffd5ec10c Last Breaking-Event-Address: <0000000000158242> ptrace_regset+0x132/0x188 Add a nop .set function to prevent the branch to zero. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09oprofile, x86: Fix crash when unloading module (nmi timer mode)Robert Richter
commit 97f7f8189fe54e3cfe324ef9ad35064f3d2d3bff upstream. If oprofile uses the nmi timer interrupt there is a crash while unloading the module. The bug can be triggered with oprofile build as module and kernel parameter nolapic set. This patch fixes this. oprofile: using NMI timer interrupt. BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [<ffffffff8123c226>] unregister_syscore_ops+0x41/0x58 PGD 42dbca067 PUD 41da6a067 PMD 0 Oops: 0002 [#1] PREEMPT SMP CPU 5 Modules linked in: oprofile(-) [last unloaded: oprofile] Pid: 2518, comm: modprobe Not tainted 3.1.0-rc7-00019-gb2fb49d #19 Advanced Micro Device Anaheim/Anaheim RIP: 0010:[<ffffffff8123c226>] [<ffffffff8123c226>] unregister_syscore_ops+0x41/0x58 RSP: 0018:ffff88041ef71e98 EFLAGS: 00010296 RAX: 0000000000000000 RBX: ffffffffa0017100 RCX: dead000000200200 RDX: 0000000000000000 RSI: dead000000100100 RDI: ffffffff8178c620 RBP: ffff88041ef71ea8 R08: 0000000000000001 R09: 0000000000000082 R10: 0000000000000000 R11: ffff88041ef71de8 R12: 0000000000000080 R13: fffffffffffffff5 R14: 0000000000000001 R15: 0000000000610210 FS: 00007fc902f20700(0000) GS:ffff88042fd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000008 CR3: 000000041cdb6000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process modprobe (pid: 2518, threadinfo ffff88041ef70000, task ffff88041d348040) Stack: ffff88041ef71eb8 ffffffffa0017790 ffff88041ef71eb8 ffffffffa0013532 ffff88041ef71ec8 ffffffffa00132d6 ffff88041ef71ed8 ffffffffa00159b2 ffff88041ef71f78 ffffffff81073115 656c69666f72706f 0000000000610200 Call Trace: [<ffffffffa0013532>] op_nmi_exit+0x15/0x17 [oprofile] [<ffffffffa00132d6>] oprofile_arch_exit+0xe/0x10 [oprofile] [<ffffffffa00159b2>] oprofile_exit+0x1e/0x20 [oprofile] [<ffffffff81073115>] sys_delete_module+0x1c3/0x22f [<ffffffff811bf09e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff8148070b>] system_call_fastpath+0x16/0x1b Code: 20 c6 78 81 e8 c5 cc 23 00 48 8b 13 48 8b 43 08 48 be 00 01 10 00 00 00 ad de 48 b9 00 02 20 00 00 00 ad de 48 c7 c7 20 c6 78 81 89 42 08 48 89 10 48 89 33 48 89 4b 08 e8 a6 c0 23 00 5a 5b RIP [<ffffffff8123c226>] unregister_syscore_ops+0x41/0x58 RSP <ffff88041ef71e98> CR2: 0000000000000008 ---[ end trace 43a541a52956b7b0 ]--- Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09perf/x86: Fix PEBS instruction unwindPeter Zijlstra
commit 57d1c0c03c6b48b2b96870d831b9ce6b917f53ac upstream. Masami spotted that we always try to decode the instruction stream as 64bit instructions when running a 64bit kernel, this doesn't work for ia32-compat proglets. Use TIF_IA32 to detect if we need to use the 32bit instruction decoder. Reported-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09x86/paravirt: PTE updates in k(un)map_atomic need to be synchronous, ↵Konrad Rzeszutek Wilk
regardless of lazy_mmu mode commit 2cd1c8d4dc7ecca9e9431e2dabe41ae9c7d89e51 upstream. Fix an outstanding issue that has been reported since 2.6.37. Under a heavy loaded machine processing "fork()" calls could crash with: BUG: unable to handle kernel paging request at f573fc8c IP: [<c01abc54>] swap_count_continued+0x104/0x180 *pdpt = 000000002a3b9027 *pde = 0000000001bed067 *pte = 0000000000000000 Oops: 0000 [#1] SMP Modules linked in: Pid: 1638, comm: apache2 Not tainted 3.0.4-linode37 #1 EIP: 0061:[<c01abc54>] EFLAGS: 00210246 CPU: 3 EIP is at swap_count_continued+0x104/0x180 .. snip.. Call Trace: [<c01ac222>] ? __swap_duplicate+0xc2/0x160 [<c01040f7>] ? pte_mfn_to_pfn+0x87/0xe0 [<c01ac2e4>] ? swap_duplicate+0x14/0x40 [<c01a0a6b>] ? copy_pte_range+0x45b/0x500 [<c01a0ca5>] ? copy_page_range+0x195/0x200 [<c01328c6>] ? dup_mmap+0x1c6/0x2c0 [<c0132cf8>] ? dup_mm+0xa8/0x130 [<c013376a>] ? copy_process+0x98a/0xb30 [<c013395f>] ? do_fork+0x4f/0x280 [<c01573b3>] ? getnstimeofday+0x43/0x100 [<c010f770>] ? sys_clone+0x30/0x40 [<c06c048d>] ? ptregs_clone+0x15/0x48 [<c06bfb71>] ? syscall_call+0x7/0xb The problem is that in copy_page_range() we turn lazy mode on, and then in swap_entry_free() we call swap_count_continued() which ends up in: map = kmap_atomic(page, KM_USER0) + offset; and then later we touch *map. Since we are running in batched mode (lazy) we don't actually set up the PTE mappings and the kmap_atomic is not done synchronously and ends up trying to dereference a page that has not been set. Looking at kmap_atomic_prot_pfn(), it uses 'arch_flush_lazy_mmu_mode' and doing the same in kmap_atomic_prot() and __kunmap_atomic() makes the problem go away. Interestingly, commit b8bcfe997e4615 ("x86/paravirt: remove lazy mode in interrupts") removed part of this to fix an interrupt issue - but it went to far and did not consider this scenario. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09x86: Fix "Acer Aspire 1" reboot hangPeter Chubb
commit 1ef03890969932e9359b9a4c658f7f87771910ac upstream. Looks like on some Acer Aspire 1s with older bioses, reboot via bios fails. It works on my machine, (with BIOS version 0.3310) but not on some others (BIOS version 0.3309). There's a log of problems at: https://bbs.archlinux.org/viewtopic.php?id=124136 This patch adds a different callback to the reboot quirk table, to allow rebooting via keybaord controller. Reported-by: Uroš Vampl <mobile.leecher@gmail.com> Tested-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Peter Chubb <peter.chubb@nicta.com.au> Cc: Don Zickus <dzickus@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1323093233-9481-1-git-send-email-anarsoul@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09x86/mpparse: Account for bus types other than ISA and PCIBjorn Helgaas
commit 9e6866686bdf2dcf3aeb0838076237ede532dcc8 upstream. In commit f8924e770e04 ("x86: unify mp_bus_info"), the 32-bit and 64-bit versions of MP_bus_info were rearranged to match each other better. Unfortunately it introduced a regression: prior to that change we used to always set the mp_bus_not_pci bit, then clear it if we found a PCI bus. After it, we set mp_bus_not_pci for ISA buses, clear it for PCI buses, and leave it alone otherwise. In the cases of ISA and PCI, there's not much difference. But ISA is not the only non-PCI bus, so it's better to always set mp_bus_not_pci and clear it only for PCI. Without this change, Dan's Dell PowerEdge 4200 panics on boot with a log indicating interrupt routing trouble unless the "noapic" option is supplied. With this change, the machine boots reliably without "noapic". Fixes http://bugs.debian.org/586494 Reported-bisected-and-tested-by: Dan McGrath <troubledaemon@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Dan McGrath <troubledaemon@gmail.com> Cc: Alexey Starikovskiy <aystarik@gmail.com> [jrnieder@gmail.com: clarified commit message] Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Link: http://lkml.kernel.org/r/20111122215000.GA9151@elie.hsd1.il.comcast.net Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09sched, x86: Avoid unnecessary overflow in sched_clockSalman Qazi
commit 4cecf6d401a01d054afc1e5f605bcbfe553cb9b9 upstream. (Added the missing signed-off-by line) In hundreds of days, the __cycles_2_ns calculation in sched_clock has an overflow. cyc * per_cpu(cyc2ns, cpu) exceeds 64 bits, causing the final value to become zero. We can solve this without losing any precision. We can decompose TSC into quotient and remainder of division by the scale factor, and then use this to convert TSC into nanoseconds. Signed-off-by: Salman Qazi <sqazi@google.com> Acked-by: John Stultz <johnstul@us.ibm.com> Reviewed-by: Paul Turner <pjt@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20111115221121.7262.88871.stgit@dungbeetle.mtv.corp.google.com Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09ARM: 7161/1: errata: no automatic store buffer drainWill Deacon
commit 11ed0ba1754841316d4095478944300acf19acc3 upstream. This patch implements a workaround for PL310 erratum 769419. On revisions of the PL310 prior to r3p2, the Store Buffer does not automatically drain. This can cause normal, non-cacheable writes to be retained when the memory system is idle, leading to suboptimal I/O performance for drivers using coherent DMA. This patch adds an optional wmb() call to the cpu_idle loop. On systems with an outer cache, this causes an explicit flush of the store buffer. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09ARM: OMAP2: select ARM_AMBA if OMAP3_EMU is definedMing Lei
commit a8a6565c7615cab3608d75af95b5c8a3522cd7c4 upstream. This patch selects ARM_AMBA if OMAP3_EMU is defined because OC_ETM depends on ARM_AMBA, so fix the link failure[1]. [1], arch/arm/kernel/built-in.o: In function `etm_remove': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:609: undefined reference to `amba_release_regions' arch/arm/kernel/built-in.o: In function `etb_remove': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:409: undefined reference to `amba_release_regions' arch/arm/kernel/built-in.o: In function `etm_init': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:640: undefined reference to `amba_driver_register' /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:646: undefined reference to `amba_driver_register' /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:648: undefined reference to `amba_driver_unregister' arch/arm/kernel/built-in.o: In function `etm_probe': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:545: undefined reference to `amba_request_regions' /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:595: undefined reference to `amba_release_regions' arch/arm/kernel/built-in.o: In function `etb_probe': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:347: undefined reference to `amba_request_regions' /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:392: undefined reference to `amba_release_regions' arch/arm/mach-omap2/built-in.o: In function `emu_init': /home/tom/git/omap/linux-2.6-omap/arch/arm/mach-omap2/emu.c:62: undefined reference to `amba_device_register' /home/tom/git/omap/linux-2.6-omap/arch/arm/mach-omap2/emu.c:63: undefined reference to `amba_device_register' make: *** [.tmp_vmlinux1] Error 1 making modules Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09ARM: OMAP: smartreflex: fix IRQ handling bugFelipe Balbi
commit 5a4f1844c2ba21f804d7729306d9b16eaeb724a8 upstream. Fix a bug which has been on this driver since it was added by the original commit 984aa6db which would never clear IRQSTATUS bits. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09arm: mx28: fix bit operation in clock settingWolfram Sang
commit c2735391fbc68feae10d6d14e60956c8106e725f upstream. reg | (1 << clk->enable_shift) always evaluates to true. Switch it to & which makes much more sense. Same fix as 13be9f00 (ARM i.MX28: fix bit operation) at a different location. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09ARM: pxa: fix inconsistent CONFIG_USB_PXA27XHaojian Zhuang
commit c0a39151a4055332897cba615623d3de2f3896df upstream. Since CONFIG_USB_GADGET_PXA27X and other macros are renamed to CONFIG_USB_PXA27X. Update them in arch/arm/mach-pxa and arch/arm/configs to keep consistent. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26ARM: 7150/1: Allow kernel unaligned accesses on ARMv6+ processorsCatalin Marinas
commit 8428e84d42179c2a00f5f6450866e70d802d1d05 upstream. Recent gcc versions generate unaligned accesses by default on ARMv6 and later processors. This patch ensures that the SCTLR.A bit is always cleared on such processors to avoid kernel traping before alignment_init() is called. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: John Linn <John.Linn@xilinx.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2025-03-01 16:01:15 +0000