aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2013-02-21Merge tag 'fixes-non-critical' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull non-critical ARM SoC bug fixes from Arnd Bergmann: "Bug fixes that did not make it into v3.8, mostly because they were not considered important enough, and in some cases because bugs only show up in combination with other patches destined for 3.9. This includes a few larger patches for GPIO on the Marvell PXA platform and a lot of Samsung specific bug fixes, as well as a series from Arnd to fix older build warnings." * tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) ARM: SPEAr13xx: Enable CONFIG_ARCH_HAS_CPUFREQ ARM: imx: MACH_MX31ADS_WM1133_EV1 needs REGULATOR_WM8350 scripts/sortextable: silence script output ARM: s3c: i2c: add platform_device forward declaration ARM: mvebu: allow selecting mvebu without Armada XP ARM: pick Versatile by default for !MMU ARM: integrator: fix build with INTEGRATOR_AP off ARM: integrator/versatile: fix NOMMU warnings ARM: sa1100: don't warn about mach/ide.h ARM: shmobile: fix defconfig warning on CONFIG_USB ARM: w90x900: fix legacy assembly syntax ARM: samsung: fix assembly syntax for new gas ARM: disable virt_to_bus/virt_to_bus almost everywhere ARM: dts: Correct pin configuration of SD 4 for exynos4x12-pinctrl ARM: SAMSUNG: Silence empty switch warning in fimc-core.h ARM: SAMSUNG: Silence empty switch warning in sdhci.h ARM: msm: proc_comm_boot_wait should not be __init arm: vt8500: Update MAINTAINERS entry for arch-vt8500 ARM: integrator: ensure ap_syscon_base is initialised when !CONFIG_MMU ARM: S5PV210: Fix early uart output in fifo mode ...
2013-02-21Merge tag 'tty-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial patches from Greg Kroah-Hartman: "Here's the big tty/serial driver patches for 3.9-rc1. More tty port rework and fixes from Jiri here, as well as lots of individual serial driver updates and fixes. All of these have been in the linux-next tree for a while." * tag 'tty-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (140 commits) tty: mxser: improve error handling in mxser_probe() and mxser_module_init() serial: imx: fix uninitialized variable warning serial: tegra: assume CONFIG_OF TTY: do not update atime/mtime on read/write lguest: select CONFIG_TTY to build properly. ARM defconfigs: add missing inclusions of linux/platform_device.h fb/exynos: include platform_device.h ARM: sa1100/assabet: include platform_device.h directly serial: imx: Fix recursive locking bug pps: Fix build breakage from decoupling pps from tty tty: Remove ancient hardpps() pps: Additional cleanups in uart_handle_dcd_change pps: Move timestamp read into PPS code proper pps: Don't crash the machine when exiting will do pps: Fix a use-after free bug when unregistering a source. pps: Use pps_lookup_dev to reduce ldisc coupling pps: Add pps_lookup_dev() function tty: serial: uartlite: Support uartlite on big and little endian systems tty: serial: uartlite: Fix sparse and checkpatch warnings serial/arc-uart: Miscll DT related updates (Grant's review comments) ... Fix up trivial conflicts, mostly just due to the TTY config option clashing with the EXPERIMENTAL removal.
2013-02-21Merge tag 'usb-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB patches from Greg Kroah-Hartman: "Here's the big USB merge for 3.9-rc1 Nothing major, lots of gadget fixes, and of course, xhci stuff. All of this has been in linux-next for a while, with the exception of the last 3 patches, which were reverts of patches in the tree that caused problems, they went in yesterday." * tag 'usb-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (190 commits) Revert "USB: EHCI: make ehci-vt8500 a separate driver" Revert "USB: EHCI: make ehci-orion a separate driver" Revert "USB: update host controller Kconfig entries" USB: update host controller Kconfig entries USB: EHCI: make ehci-orion a separate driver USB: EHCI: make ehci-vt8500 a separate driver USB: usb-storage: unusual_devs update for Super TOP SATA bridge USB: ehci-omap: Fix autoloading of module USB: ehci-omap: Don't free gpios that we didn't request USB: option: add Huawei "ACM" devices using protocol = vendor USB: serial: fix null-pointer dereferences on disconnect USB: option: add Yota / Megafon M100-1 4g modem drivers/usb: add missing GENERIC_HARDIRQS dependencies USB: storage: properly handle the endian issues of idProduct testusb: remove all mentions of 'usbfs' usb: gadget: imx_udc: make it depend on BROKEN usb: omap_control_usb: fix compile warning ARM: OMAP: USB: Add phy binding information ARM: OMAP2: MUSB: Specify omap4 has mailbox ARM: OMAP: devices: create device for usb part of control module ...
2013-02-21Merge tag 'staging-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging tree update from Greg Kroah-Hartman: "Here's the big staging tree merge for 3.9-rc1 Lots of cleanups and updates for drivers all through the staging tree. We are pretty much "code neutral" here, adding just about as many lines as we removed. All of these have been in linux-next for a while." * tag 'staging-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (804 commits) staging: comedi: vmk80xx: wait for URBs to complete staging: comedi: drivers: addi-data: hwdrv_apci3200.c: Add a missing semicolon staging: et131x: Update TODO list staging: et131x: Remove assignment of skb->dev staging: wlan-ng: hfa384x.h: fix for error reported by smatch staging/zache checkpatch ERROR: spaces prohibited around that staging/ozwpan: Mark read only parameters and structs as const staging/ozwpan: Remove empty and unused function oz_cdev_heartbeat staging/ozwpan: Mark local functions as static (fix sparse warnings) staging/ozwpan: Add missing header includes staging/usbip: Mark local functions as static (fix sparse warnings) staging/xgifb: Remove duplicated code in loops. staging/xgifb: Consolidate return paths staging/xgifb: Remove code without effect staging/xgifb: Remove unnecessary casts staging/xgifb: Consolidate if/else if with identical code branches staging: vt6656: replaced custom TRUE definition with true staging: vt6656: replaced custom FALSE definition with false staging: vt6656: replace custom BOOL definition with bool staging/rtl8187se: Mark functions as static to silence sparse ...
2013-02-21Merge tag 'driver-core-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg Kroah-Hartman: "Here is the big driver core merge for 3.9-rc1 There are two major series here, both of which touch lots of drivers all over the kernel, and will cause you some merge conflicts: - add a new function called devm_ioremap_resource() to properly be able to check return values. - remove CONFIG_EXPERIMENTAL Other than those patches, there's not much here, some minor fixes and updates" Fix up trivial conflicts * tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits) base: memory: fix soft/hard_offline_page permissions drivercore: Fix ordering between deferred_probe and exiting initcalls backlight: fix class_find_device() arguments TTY: mark tty_get_device call with the proper const values driver-core: constify data for class_find_device() firmware: Ignore abort check when no user-helper is used firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER firmware: Make user-mode helper optional firmware: Refactoring for splitting user-mode helper code Driver core: treat unregistered bus_types as having no devices watchdog: Convert to devm_ioremap_resource() thermal: Convert to devm_ioremap_resource() spi: Convert to devm_ioremap_resource() power: Convert to devm_ioremap_resource() mtd: Convert to devm_ioremap_resource() mmc: Convert to devm_ioremap_resource() mfd: Convert to devm_ioremap_resource() media: Convert to devm_ioremap_resource() iommu: Convert to devm_ioremap_resource() drm: Convert to devm_ioremap_resource() ...
2013-02-21Merge tag 'sound-3.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "The biggest change in this update is the unification of HD-audio codec parsers. Now the HD-audio codec is parsed in a generic parser code which is invoked by each HD-audio codec driver. Some background information is found in David Henningsson's blog entry: http://voices.canonical.com/david.henningsson/2013/01/18/upcoming-changes-to-the-intel-hda-drivers/ Other than that, some random updates/fixes like USB-audio and a bunch of small AoC updates as usual. Highlights: - Unification of HD-audio parser code (aka generic parser) - Support of new Intel HD-audio controller, new IDT codecs - Fixes for HD-audio HDMI audio hotplug - Haswell HDMI audio fixup - Support of Creative CA0132 DSP code - A few fixes of HDSP driver - USB-audio fix for Roland A-PRO, M-Audio FT C600 - Support PM for aloop driver (and fixes Oops) - Compress API updates for gapless playback support For ASoC part: - Support for a wider range of hardware in the compressed stream code - The ability to mute capture streams as well as playback streams while inactive - DT support for AK4642, FSI, Samsung I2S and WM8962 - AC'97 support for Tegra - New driver for max98090, replacing the stub which was there - A new driver from Dialog Note that due to dependencies, DTification of DMA support for Samsung platforms (used only by the and I2S driver and SPI) is merged here as well." Fix up trivial conflict in drivers/spi/spi-s3c64xx.c due to removed code being changed. * tag 'sound-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (453 commits) ALSA: usb: Fix Processing Unit Descriptor parsers ALSA: hda - hdmi: Notify userspace when ELD control changes ALSA: hda - hdmi: Protect ELD buffer ALSA: hda - hdmi: Refactor hdmi_eld into parsed_hdmi_eld ALSA: hda - hdmi: Do not expose eld data when eld is invalid ALSA: hda - hdmi: ELD shouldn't be valid after unplug ALSA: hda - Fix the silent speaker output on Fujitsu S7020 laptop ALSA: hda - add quirks for mute LED on two HP machines ALSA: usb/quirks, fix out-of-bounds access ASoC: codecs: Add da7213 codec ALSA: au88x0 - Define channel map for au88x0 ALSA: compress: add support for gapless playback ALSA: hda - Remove speaker clicks on CX20549 ALSA: hda - Disable runtime PM for Intel 5 Series/3400 ALSA: hda - Increase badness for missing multi-io ASoC: arizona: Automatically manage input mutes ALSA: hda - Fix broken workaround for HDMI/SPDIF conflicts ALSA: hda/ca0132 - Add missing \n to debug prints ALSA: hda/ca0132 - Fix type of INVALID_CHIP_ADDRESS ALSA: hda - update documentation for no-primary-hp fixup ...
2013-02-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking update from David Miller: 1) Checkpoint/restarted TCP sockets now can properly propagate the TCP timestamp offset. From Andrey Vagin. 2) VMWARE VM VSOCK layer, from Andy King. 3) Much improved support for virtual functions and SR-IOV in bnx2x, from Ariel ELior. 4) All protocols on ipv4 and ipv6 are now network namespace aware, and all the compatability checks for initial-namespace-only protocols is removed. Thanks to Tom Parkin for helping deal with the last major holdout, L2TP. 5) IPV6 support in netpoll and network namespace support in pktgen, from Cong Wang. 6) Multiple Registration Protocol (MRP) and Multiple VLAN Registration Protocol (MVRP) support, from David Ward. 7) Compute packet lengths more accurately in the packet scheduler, from Eric Dumazet. 8) Use per-task page fragment allocator in skb_append_datato_frags(), also from Eric Dumazet. 9) Add support for connection tracking labels in netfilter, from Florian Westphal. 10) Fix default multicast group joining on ipv6, and add anti-spoofing checks to 6to4 and 6rd. From Hannes Frederic Sowa. 11) Make ipv4/ipv6 fragmentation memory limits more reasonable in modern times, rearrange inet frag datastructures for better cacheline locality, and move more operations outside of locking. From Jesper Dangaard Brouer. 12) Instead of strict master <--> slave relationships, allow arbitrary scenerios with "upper device lists". From Jiri Pirko. 13) Improve rate limiting accuracy in TBF and act_police, also from Jiri Pirko. 14) Add a BPF filter netfilter match target, from Willem de Bruijn. 15) Orphan and delete a bunch of pre-historic networking drivers from Paul Gortmaker. 16) Add TSO support for GRE tunnels, from Pravin B SHelar. Although this still needs some minor bug fixing before it's %100 correct in all cases. 17) Handle unresolved IPSEC states like ARP, with a resolution packet queue. From Steffen Klassert. 18) Remove TCP Appropriate Byte Count support (ABC), from Stephen Hemminger. This was long overdue. 19) Support SO_REUSEPORT, from Tom Herbert. 20) Allow locking a socket BPF filter, so that it cannot change after a process drops capabilities. 21) Add VLAN filtering to bridge, from Vlad Yasevich. 22) Bring ipv6 on-par with ipv4 and do not cache neighbour entries in the ipv6 routes, from YOSHIFUJI Hideaki. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1538 commits) ipv6: fix race condition regarding dst->expires and dst->from. net: fix a wrong assignment in skb_split() ip_gre: remove an extra dst_release() ppp: set qdisc_tx_busylock to avoid LOCKDEP splat atl1c: restore buffer state net: fix a build failure when !CONFIG_PROC_FS net: ipv4: fix waring -Wunused-variable net: proc: fix build failed when procfs is not configured Revert "xen: netback: remove redundant xenvif_put" net: move procfs code to net/core/net-procfs.c qmi_wwan, cdc-ether: add ADU960S bonding: set sysfs device_type to 'bond' bonding: fix bond_release_all inconsistencies b44: use netdev_alloc_skb_ip_align() xen: netback: remove redundant xenvif_put net: fec: Do a sanity check on the gpio number ip_gre: propogate target device GSO capability to the tunnel device ip_gre: allow CSUM capable devices to handle packets bonding: Fix initialize after use for 3ad machine state spinlock bonding: Fix race condition between bond_enslave() and bond_3ad_update_lacp_rate() ...
2013-02-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
Pull sparc updates from David Miller: "Mostly more sparc64 THP bug fixes, and a refactoring of SMP bootup on sparc32 from Sam Ravnborg." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc32: refactor smp boot sparc64: Fix huge PMD to PTE translation for sun4u in TLB miss handler. sparc64: Fix tsb_grow() in atomic context. sparc64: Handle hugepage TSB being NULL. sparc64: Fix gfp_flags setting in tsb_grow().
2013-02-20Merge tag 'arm64-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64 Pull arm64 patches from Catalin Marinas: - SMP support for the PSCI booting protocol (power state coordination interface). - Simple earlyprintk support. - Platform devices populated by default from the DT (SoC-agnostic). - CONTEXTIDR support (used by external trace tools). * tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: arm64: mm: update CONTEXTIDR register to contain PID of current process arm64: atomics: fix grossly inconsistent asm constraints for exclusives arm64: compat: use compat_uptr_t type for compat_ucontext.uc_link arm64: Select ARCH_WANT_FRAME_POINTERS arm64: Add kvm_para.h and xor.h generic headers arm64: SMP: enable PSCI boot method arm64: psci: add support for PSCI invocations from the kernel arm64: SMP: rework the SMP code to be enabling method agnostic arm64: perf: add guest vs host discrimination arm64: add COMPAT_PSR_*_BIT flags arm64: Add simple earlyprintk support arm64: Populate the platform devices
2013-02-20Merge branch 'for-linus-2' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM updates (part two) from Russell King: - breakpoint and perf updates from Will Deacon. - hypervisor boot mode updates from Will. - support for Power State Coordination Interface via the Hypervisor - core ARM support for KVM * 'for-linus-2' of git://git.linaro.org/people/rmk/linux-arm: (32 commits) KVM: ARM: Add maintainer entry for KVM/ARM KVM: ARM: Power State Coordination Interface implementation KVM: ARM: Handle I/O aborts KVM: ARM: Handle guest faults in KVM KVM: ARM: VFP userspace interface KVM: ARM: Demux CCSIDR in the userspace API KVM: ARM: User space API for getting/setting co-proc registers KVM: ARM: Emulation framework and CP15 emulation KVM: ARM: World-switch implementation KVM: ARM: Inject IRQs and FIQs from userspace KVM: ARM: Memory virtualization setup KVM: ARM: Hypervisor initialization KVM: ARM: Initial skeleton to compile KVM support ARM: Section based HYP idmap ARM: Add page table and page defines needed by KVM ARM: perf: simplify __hw_perf_event_init err handling ARM: perf: remove unnecessary checks for idx < 0 ARM: perf: handle armpmu_register failing ARM: perf: don't pretend to support counting of L1I writes ARM: perf: remove redundant NULL check on cpu_pmu ...
2013-02-20Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM updates (part one) from Russell King: - MMC patches from Ulf Hansson and Pawel Moll. These add support for DDR mode and the latest variant found on ARM Versatile Express, as well as a number of cleanups. - A fix for to improve the behaviour of ARMs sched_clock() - Changes to the ARM ioremap() code. I'm not convinced with the primary arguments for this, but it's been around for a while, and people seem happy with it - and the "other" justification for this is at http://lkml.org/lkml/2012/12/6/184 - Add SCHED_HRTICK to ARMs Kconfig - Making the ARM SHA/AES code Thumb-2 compatible - A collection of other small updates. * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (26 commits) ARM: add SCHED_HRTICK config option ARM: 7650/1: mm: replace direct access to mm->context.id with new macro ARM: 7649/1: mm: mm->context.id fix for big-endian ARM: 7648/1: pci: Allow passing per-controller private data ARM: 7647/1: pci: Keep pci_common_init() around after init ARM: fix warnings introduced by previous patch ARM: 7646/1: mm: use static_vm for managing static mapped areas ARM: 7645/1: ioremap: introduce an infrastructure for static mapped area ARM: 7644/1: vmregion: remove vmregion code entirely MAINTAINERS: Re-assert MMCI driver maintainer status MAINTAINERS: add additional file for MMCI driver MAINTAINERS: add maintainer entry for AMBA serial drivers ARM: 7637/1: memory: use SZ_ constants for defining the virtual memory layout ARM: 7643/1: sched: correct update_sched_clock() ARM: 7635/1: versatile: fix the PCI IRQ regression ARM: 7639/1: cache-l2x0: add missed dummy outer_resume entry ARM: 7630/1: mmc: mmci: Fixup and cleanup code for DMA handling ARM: 7632/1: spinlock: avoid exclusive accesses on unlock() path ARM: 7631/1: mmc: mmci: Add new VE MMCI variant ARM: 7623/1: mmc: mmci: Fixup clock gating when freq is 0 for ST-variants ...
2013-02-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k update from Geert Uytterhoeven. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Sort out !CONFIG_MMU_SUN3 vs. CONFIG_HAS_DMA swim: Add missing spinlock init
2013-02-20sparc32: refactor smp bootSam Ravnborg
Introduce a common smp_callin() function to call from trampoline_32.S. Add platform specific functions to handle the platform details. This is in preparation for a patch that will unify the smp boot stuff for all architectures. sparc32 was significantly different to warrant this patch in preparation. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: David S. Miller <davem@davemloft.net> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Acked-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-20sparc64: Fix huge PMD to PTE translation for sun4u in TLB miss handler.David S. Miller
When we set the sun4u version of the PTE execute bit, it's: or REG, _PAGE_EXEC_4U, REG _PAGE_EXEC_4U is 0x1000, unfortunately the immedate field of the 'or' instruction is a signed 13-bit value. So the above actually assembles into: or REG, -4096, REG completely corrupting the final PTE value. Set it with a: sethi %hi(_PAGE_EXEC_4U), TMP or REG, TMP, REG sequence instead. This fixes "git gc" crashes on sun4u machines. Reported-by: Meelis Roos <mroos@linux.ee> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-20Merge tag 'pm+acpi-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: - Rework of the ACPI namespace scanning code from Rafael J. Wysocki with contributions from Bjorn Helgaas, Jiang Liu, Mika Westerberg, Toshi Kani, and Yinghai Lu. - ACPI power resources handling and ACPI device PM update from Rafael J Wysocki. - ACPICA update to version 20130117 from Bob Moore and Lv Zheng with contributions from Aaron Lu, Chao Guan, Jesper Juhl, and Tim Gardner. - Support for Intel Lynxpoint LPSS from Mika Westerberg. - cpuidle update from Len Brown including Intel Haswell support, C1 state for intel_idle, removal of global pm_idle. - cpuidle fixes and cleanups from Daniel Lezcano. - cpufreq fixes and cleanups from Viresh Kumar and Fabio Baltieri with contributions from Stratos Karafotis and Rickard Andersson. - Intel P-states driver for Sandy Bridge processors from Dirk Brandewie. - cpufreq driver for Marvell Kirkwood SoCs from Andrew Lunn. - cpufreq fixes related to ordering issues between acpi-cpufreq and powernow-k8 from Borislav Petkov and Matthew Garrett. - cpufreq support for Calxeda Highbank processors from Mark Langsdorf and Rob Herring. - cpufreq driver for the Freescale i.MX6Q SoC and cpufreq-cpu0 update from Shawn Guo. - cpufreq Exynos fixes and cleanups from Jonghwan Choi, Sachin Kamat, and Inderpal Singh. - Support for "lightweight suspend" from Zhang Rui. - Removal of the deprecated power trace API from Paul Gortmaker. - Assorted updates from Andreas Fleig, Colin Ian King, Davidlohr Bueso, Joseph Salisbury, Kees Cook, Li Fei, Nishanth Menon, ShuoX Liu, Srinivas Pandruvada, Tejun Heo, Thomas Renninger, and Yasuaki Ishimatsu. * tag 'pm+acpi-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (267 commits) PM idle: remove global declaration of pm_idle unicore32 idle: delete stray pm_idle comment openrisc idle: delete pm_idle mn10300 idle: delete pm_idle microblaze idle: delete pm_idle m32r idle: delete pm_idle, and other dead idle code ia64 idle: delete pm_idle cris idle: delete idle and pm_idle ARM64 idle: delete pm_idle ARM idle: delete pm_idle blackfin idle: delete pm_idle sparc idle: rename pm_idle to sparc_idle sh idle: rename global pm_idle to static sh_idle x86 idle: rename global pm_idle to static x86_idle APM idle: register apm_cpu_idle via cpuidle cpufreq / intel_pstate: Add kernel command line option disable intel_pstate. cpufreq / intel_pstate: Change to disallow module build tools/power turbostat: display SMI count by default intel_idle: export both C1 and C1E ACPI / hotplug: Fix concurrency issues and memory leaks ...
2013-02-20Merge tag 'dt-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds
Pull device tree changes from Grant Likely: "All around device tree changes destined for v3.8. Aside from the documentation updates the highlights in this branch include: - Kbuild changes for using CPP with .dts files - locking fix from preempt_rt patchset - include DT alias names in device uevent - Selftest bugfixes and improvements - New function for counting phandles stanzas in a property - constify argument to of_node_full_name() - Various bug fixes This tree did also contain a commit to use platform_device_add instead of open-coding the device add code, but it caused problems with amba devices and needed to be reverted." * tag 'dt-for-linus' of git://git.secretlab.ca/git/linux: (23 commits) Revert "of: use platform_device_add" kbuild: limit dtc+cpp include path gpio: Make of_count_named_gpios() use new of_count_phandle_with_args() of: Create function for counting number of phandles in a property of/base: Clean up exit paths for of_parse_phandle_with_args() of/selftest: Use selftest() macro throughout of/selftest: Fix GPIOs selftest to cover the 7th case of: fix recursive locking in of_get_next_available_child() documentation/devicetree: Fix a typo in exynos-dw-mshc.txt OF: convert devtree lock from rw_lock to raw spinlock of/exynos_g2d: Add Bindings for exynos G2D driver kbuild: create a rule to run the pre-processor on *.dts files input: Extend matrix-keypad device tree binding devicetree: Move NS2 LEDs binding into LEDs directory of: use platform_device_add powerpc/5200: Fix size to request_mem_region() call documentation/devicetree: Fix typos of: add 'const' to of_node_full_name parameter of: Output devicetree alias names in uevent DT: add vendor prefixes for Renesas and Toshiba ...
2013-02-20Merge tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linuxLinus Torvalds
Pull clock framework update from Michael Turquette: "The common clock framework changes for 3.9 are almost entirely fixes. None are dire enough to be Cc'd to stable which may be interpreted to mean that users of the framework are reaching stability. Lots of new adoption of this framework is via DeviceTree data and that comes through the respective architecture and platform trees instead of through the clk framework tree. Two new features are improved debugfs output and an improvement to how DT clocks are initialized by reusing a common method." * tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linux: (25 commits) clk: sunxi: remove stale Makefile entry clk: vexpress: Use common of_clk_init() function clk: zynq: Use common of_clk_init() function clk: vt8500: Use common of_clk_init() function clk: highbank: Use common of_clk_init() function clk: sunxi: Use common of_clk_init() function clk: add common of_clk_init() function clk: Deduplicate exit code in clk_set_rate clk: beautify Makefile clk-divider: fix macros clk: prima2: enable dt-binding clkdev mapping clk: mxs: Index is always positive clk: max77686: Avoid double free at remove time clk: remove exported function from __init section clk: vt8500: Add support for WM8750/WM8850 PLL clocks clk: vt8500: Fix division-by-0 when requested rate=0 clk: vt8500: Fix device clock divisor calculations clk: vt8500: Fix error in PLL calculations on non-exact match. clk: max77686: Remove unnecessary NULL checking for container_of() clk: JSON debugfs clock tree summary ...
2013-02-20sparc64: Fix tsb_grow() in atomic context.David S. Miller
If our first THP installation for an MM is via the set_pmd_at() done during khugepaged's collapsing we'll end up in tsb_grow() trying to do a GFP_KERNEL allocation with several locks held. Simply using GFP_ATOMIC in this situation is not the best option because we really can't have this fail, so we'd really like to keep this an order 0 GFP_KERNEL allocation if possible. Also, doing the TSB allocation from khugepaged is a really bad idea because we'll allocate it potentially from the wrong NUMA node in that context. So what we do is defer the hugepage TSB allocation until the first TLB miss we take on a hugepage. This is slightly tricky because we have to handle two unusual cases: 1) Taking the first hugepage TLB miss in the window trap handler. We'll call the winfix_trampoline when that is detected. 2) An initial TSB allocation via TLB miss races with a hugetlb fault on another cpu running the same MM. We handle this by unconditionally loading the TSB we see into the current cpu even if it's non-NULL at hugetlb_setup time. Reported-by: Meelis Roos <mroos@ut.ee> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-20sparc64: Handle hugepage TSB being NULL.David S. Miller
Accomodate the possibility that the TSB might be NULL at the point that update_mmu_cache() is invoked. This is necessary because we will sometimes need to defer the TSB allocation to the first fault that happens in the 'mm'. Seperate out the hugepage PTE test into a seperate function so that the logic is clearer. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-20sparc64: Fix gfp_flags setting in tsb_grow().David S. Miller
We should "|= more_flags" rather than "= more_flags". Reported-by: David Rientjes <rientjes@google.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-20Merge tag 'pinctrl-for-v3.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl changes from Linus Walleij: "These are the main pinctrl changes for the v3.9 merge window. The most interesting change by far is how the device core grabs pinctrl default handles avoiding the need to stick boilerplate into driver consumers. - Grabbing of default pinctrl handles from the device core. These are the hunks hitting drivers/base. All is ACKed by Greg, after a long discussion about different alternatives. - Some stuff also touches the MFD and ARM SoC trees, this has been coordinated and ACKed. - New drivers for: - The Tegra 114 sub-SoC - Allwinner sunxi - New ABx500 driver and sub-SoC drivers for AB8500, AB8505, AB9540 and AB8540. - Make it possible for hogged pins to enter a sleep mode, and make it possible for drivers to control that mode. - Various clean-up, extensions and device tree support to various pin controllers." * tag 'pinctrl-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (68 commits) pinctrl: tegra: add clfvs function to Tegra114 support pinctrl: generic: rename input schmitt disable pinctrl/pinconfig: add debug interface pinctrl: samsung: remove duplicated line ARM: ux500: use real AB8500 IRQ numbers instead of virtual ones ARM: ux500: remove irq_base property from platform_data pinctrl/abx500: use direct IRQ defines pinctrl/abx500: replace IRQ offsets with table read-in values pinctrl/abx500: move IRQ handling to ab8500-core pinctrl: exynos5440: remove erroneous __init pinctrl/abx500: adjust offset for get_mode() pinctrl/abx500: add Device Tree support pinctrl/abx500: align GPIO cluster boundaries pinctrl/abx500: prevent error path from corrupting returning error pinctrl: sunxi: add of_xlate function pinctrl/lantiq: fix pin number in ltq_pmx_gpio_request_enable pinctrl/lantiq: add functionality to falcon_pinconf_dbg_show pinctrl/lantiq: fix pinconfig parameters pinctrl/lantiq: one of the boot leds was defined incorrectly pinctrl/lantiq: only probe available pad controllers ...
2013-02-20Merge branch 'misc' into for-linusRussell King
Conflicts: arch/arm/include/asm/memory.h
2013-02-19Merge branch 'for-3.9-cleanups' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull workqueue [delayed_]work_pending() cleanups from Tejun Heo: "This is part of on-going cleanups to remove / minimize usages of workqueue interfaces which are deprecated and/or misleading. This round drops a number of usages of [delayed_]work_pending(), which are dangerous as they lack any form of synchronization and thus often lead to buggy / unnecessary code. There are a couple legitimate use cases in kernel. Hopefully, they can be converted and [delayed_]work_pending() can be removed completely. Even if not, removing most of misuses should make it more difficult to find examples of misuses and thus slow down growth of them. These changes are independent from other workqueue changes." * 'for-3.9-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: wimax/i2400m: fix i2400m->wake_tx_skb handling kprobes: fix wait_for_kprobe_optimizer() ipw2x00: simplify scan_event handling video/exynos: don't use [delayed_]work_pending() tty/max3100: don't use [delayed_]work_pending() x86/mce: don't use [delayed_]work_pending() rfkill: don't use [delayed_]work_pending() wl1251: don't use [delayed_]work_pending() thinkpad_acpi: don't use [delayed_]work_pending() mwifiex: don't use [delayed_]work_pending() sja1000: don't use [delayed_]work_pending()
2013-02-19Merge branch 'x86-uv-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 UV3 support update from Ingo Molnar: "Support for the SGI Ultraviolet System 3 (UV3) platform - the upcoming third major iteration and upscaling of the SGI UV supercomputing platform." * 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, uv, uv3: Trim MMR register definitions after code changes for SGI UV3 x86, uv, uv3: Check current gru hub support for SGI UV3 x86, uv, uv3: Update Time Support for SGI UV3 x86, uv, uv3: Update x2apic Support for SGI UV3 x86, uv, uv3: Update Hub Info for SGI UV3 x86, uv, uv3: Update ACPI Check to include SGI UV3 x86, uv, uv3: Update MMR register definitions for SGI Ultraviolet System 3 (UV3)
2013-02-19Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 platform changes from Ingo Molnar: - Support for the Technologic Systems TS-5500 platform, by Vivien Didelot - Improved NUMA support on AMD systems: Add support for federated systems where multiple memory controllers can exist and see each other over multiple PCI domains. This basically means that AMD node ids can be more than 8 now and the code handling this is taught to incorporate PCI domain into those IDs. - Support for the Goldfish virtual Android emulator, by Jun Nakajima, Intel, Google, et al. - Misc fixlets. * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Add TS-5500 platform support x86/srat: Simplify memory affinity init error handling x86/apb/timer: Remove unnecessary "if" goldfish: platform device for x86 amd64_edac: Fix type usage in NB IDs and memory ranges amd64_edac: Fix PCI function lookup x86, AMD, NB: Use u16 for northbridge IDs in amd_get_nb_id x86, AMD, NB: Add multi-domain support
2013-02-19Merge branch 'x86-hyperv-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/hyperv changes from Ingo Molnar: "The biggest change is support for Windows 8's improved hypervisor interrupt model on the Linux Hyper-V guest subsystem code side. Smallish fixes otherwise." * 'x86-hyperv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, hyperv: HYPERV depends on X86_LOCAL_APIC X86: Handle Hyper-V vmbus interrupts as special hypervisor interrupts X86: Add a check to catch Xen emulation of Hyper-V x86: Hyper-V: register clocksource only if its advertised
2013-02-19Merge branch 'x86-debug-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/debug changes from Ingo Molnar: "Two init annotations and a built-in memtest speedup" * 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/memtest: Shorten time for tests x86: Convert a few mistaken __cpuinit annotations to __init x86/EFI: Properly init-annotate BGRT code
2013-02-19Merge branch 'x86-cleanups-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanup patches from Ingo Molnar: "Misc smaller cleanups" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: ptrace.c only needs export.h and not the full module.h x86, apb_timer: remove unused variable percpu_timer um: don't compare a pointer to 0 arch/x86/platform/uv: use ARRAY_SIZE where possible
2013-02-19Merge branch 'x86-build-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull two x86 kernel build changes from Ingo Molnar: "The first change modifies how 'make oldconfig' works on cross-bitness situations on x86. It was felt the new behavior of preserving the bitness of the .config is more logical. This is a leftover of the merge. The second change eliminates a Perl warning. (There's another, more complete fix resulting of this warning fix, which second fix in flight to you via the kbuild tree, which will remove the timeconst.pl script altogether.)" * 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timeconst.pl: Eliminate Perl warning x86: Default to ARCH=x86 to avoid overriding CONFIG_64BIT
2013-02-19Merge branch 'x86-boot-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 bootup changes from Ingo Molnar: "Deal with bootloaders which fail to initialize unknown fields in boot_params to zero, by sanitizing boot params passed in. This unbreaks versions of kexec-utils. Other bootloaders do not appear to show sensitivity to this change, but it's a possibility for breakage nevertheless." * 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, boot: Sanitize boot_params if not zeroed on creation
2013-02-19Merge branch 'x86-asm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/asm changes from Ingo Molnar: "The biggest change (by line count) is the unification of the XOR code and then the introduction of an additional SSE based XOR assembly method. The other bigger change is the head_32.S rework/cleanup by Borislav Petkov. Last but not least there's the usual laundry list of small but dangerous (and hopefully perfectly tested) changes to subtle low level x86 code, plus cleanups." * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, head_32: Give the 6 label a real name x86, head_32: Remove second CPUID detection from default_entry x86: Detect CPUID support early at boot x86, head_32: Remove i386 pieces x86: Require MOVBE feature in cpuid when we use it x86: Enable ARCH_USE_BUILTIN_BSWAP x86/xor: Add alternative SSE implementation only prefetching once per 64-byte line x86/xor: Unify SSE-base xor-block routines x86: Fix a typo x86/mm: Fix the argument passed to sync_global_pgds() x86/mm: Convert update_mmu_cache() and update_mmu_cache_pmd() to functions ix86: Tighten asmlinkage_protect() constraints
2013-02-19Merge branch 'x86-apic-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/apic changes from Ingo Molnar: "Main changes: - Multiple MSI support added to the APIC, PCI and AHCI code - acked by all relevant maintainers, by Alexander Gordeev. The advantage is that multiple AHCI ports can have multiple MSI irqs assigned, and can thus spread to multiple CPUs. [ Drivers can make use of this new facility via the pci_enable_msi_block_auto() method ] - x86 IOAPIC code from interrupt remapping cleanups from Joerg Roedel: These patches move all interrupt remapping specific checks out of the x86 core code and replaces the respective call-sites with function pointers. As a result the interrupt remapping code is better abstraced from x86 core interrupt handling code. - Various smaller improvements, fixes and cleanups." * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits) x86/intel/irq_remapping: Clean up x2apic opt-out security warning mess x86, kvm: Fix intialization warnings in kvm.c x86, irq: Move irq_remapped out of x86 core code x86, io_apic: Introduce eoi_ioapic_pin call-back x86, msi: Introduce x86_msi.compose_msi_msg call-back x86, irq: Introduce setup_remapped_irq() x86, irq: Move irq_remapped() check into free_remapped_irq x86, io-apic: Remove !irq_remapped() check from __target_IO_APIC_irq() x86, io-apic: Move CONFIG_IRQ_REMAP code out of x86 core x86, irq: Add data structure to keep AMD specific irq remapping information x86, irq: Move irq_remapping_enabled declaration to iommu code x86, io_apic: Remove irq_remapping_enabled check in setup_timer_IRQ0_pin x86, io_apic: Move irq_remapping_enabled checks out of check_timer() x86, io_apic: Convert setup_ioapic_entry to function pointer x86, io_apic: Introduce set_affinity function pointer x86, msi: Use IRQ remapping specific setup_msi_irqs routine x86, hpet: Introduce x86_msi_ops.setup_hpet_msi x86, io_apic: Introduce x86_io_apic_ops.print_entries for debugging x86, io_apic: Introduce x86_io_apic_ops.disable() x86, apic: Mask IO-APIC and PIC unconditionally on LAPIC resume ...
2013-02-19Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer changes from Ingo Molnar: "Main changes: - ntp: Add CONFIG_RTC_SYSTOHC: a generic RTC driver facility complementing the existing CONFIG_RTC_HCTOSYS, which uses NTP to keep the hardware clock updated. - posix-timers: Fix clock_adjtime to always return timex data on success. This is changing the ABI, but no breakage was expected and found - caution is warranted nevertheless. - platform persistent clock improvements/cleanups. - clockevents: refactor timer broadcast handling to be more generic and less duplicated with matching architecture code (mostly ARM motivated.) - various fixes and cleanups" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timers/x86/hpet: Use HPET_COUNTER to specify the hpet counter in vread_hpet() posix-cpu-timers: Fix nanosleep task_struct leak clockevents: Fix generic broadcast for FEAT_C3STOP time, Fix setting of hardware clock in NTP code hrtimer: Prevent hrtimer_enqueue_reprogram race clockevents: Add generic timer broadcast function clockevents: Add generic timer broadcast receiver timekeeping: Switch HAS_PERSISTENT_CLOCK to ALWAYS_USE_PERSISTENT_CLOCK x86/time/rtc: Don't print extended CMOS year when reading RTC x86: Select HAS_PERSISTENT_CLOCK on x86 timekeeping: Add CONFIG_HAS_PERSISTENT_CLOCK option rtc: Skip the suspend/resume handling if persistent clock exist timekeeping: Add persistent_clock_exist flag posix-timers: Fix clock_adjtime to always return timex data on success Round the calculated scale factor in set_cyc2ns_scale() NTP: Add a CONFIG_RTC_SYSTOHC configuration MAINTAINERS: Update John Stultz's email time: create __getnstimeofday for WARNless calls
2013-02-19Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler changes from Ingo Molnar: "Main changes: - scheduler side full-dynticks (user-space execution is undisturbed and receives no timer IRQs) preparation changes that convert the cputime accounting code to be full-dynticks ready, from Frederic Weisbecker. - Initial sched.h split-up changes, by Clark Williams - select_idle_sibling() performance improvement by Mike Galbraith: " 1 tbench pair (worst case) in a 10 core + SMT package: pre 15.22 MB/sec 1 procs post 252.01 MB/sec 1 procs " - sched_rr_get_interval() ABI fix/change. We think this detail is not used by apps (so it's not an ABI in practice), but lets keep it under observation. - misc RT scheduling cleanups, optimizations" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) sched/rt: Add <linux/sched/rt.h> header to <linux/init_task.h> cputime: Remove irqsave from seqlock readers sched, powerpc: Fix sched.h split-up build failure cputime: Restore CPU_ACCOUNTING config defaults for PPC64 sched/rt: Move rt specific bits into new header file sched/rt: Add a tuning knob to allow changing SCHED_RR timeslice sched: Move sched.h sysctl bits into separate header sched: Fix signedness bug in yield_to() sched: Fix select_idle_sibling() bouncing cow syndrome sched/rt: Further simplify pick_rt_task() sched/rt: Do not account zero delta_exec in update_curr_rt() cputime: Safely read cputime of full dynticks CPUs kvm: Prepare to add generic guest entry/exit callbacks cputime: Use accessors to read task cputime stats cputime: Allow dynamic switch between tick/virtual based cputime accounting cputime: Generic on-demand virtual cputime accounting cputime: Move default nsecs_to_cputime() to jiffies based cputime file cputime: Librarize per nsecs resolution cputime definitions cputime: Avoid multiplication overflow on utime scaling context_tracking: Export context state for generic vtime ... Fix up conflict in kernel/context_tracking.c due to comment additions.
2013-02-19Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf changes from Ingo Molnar: "There are lots of improvements, the biggest changes are: Main kernel side changes: - Improve uprobes performance by adding 'pre-filtering' support, by Oleg Nesterov. - Make some POWER7 events available in sysfs, equivalent to what was done on x86, from Sukadev Bhattiprolu. - tracing updates by Steve Rostedt - mostly misc fixes and smaller improvements. - Use perf/event tracing to report PCI Express advanced errors, by Tony Luck. - Enable northbridge performance counters on AMD family 15h, by Jacob Shin. - This tracing commit: tracing: Remove the extra 4 bytes of padding in events changes the ABI. All involved parties (PowerTop in particular) seem to agree that it's safe to do now with the introduction of libtraceevent, but the devil is in the details ... Main tooling side changes: - Add 'event group view', from Namyung Kim: To use it, 'perf record' should group events when recording. And then perf report parses the saved group relation from file header and prints them together if --group option is provided. You can use the 'perf evlist' command to see event group information: $ perf record -e '{ref-cycles,cycles}' noploop 1 [ perf record: Woken up 2 times to write data ] [ perf record: Captured and wrote 0.385 MB perf.data (~16807 samples) ] $ perf evlist --group {ref-cycles,cycles} With this example, default perf report will show you each event separately. You can use --group option to enable event group view: $ perf report --group ... # group: {ref-cycles,cycles} # ======== # Samples: 7K of event 'anon group { ref-cycles, cycles }' # Event count (approx.): 6876107743 # # Overhead Command Shared Object Symbol # ................ ....... ................. .......................... 99.84% 99.76% noploop noploop [.] main 0.07% 0.00% noploop ld-2.15.so [.] strcmp 0.03% 0.00% noploop [kernel.kallsyms] [k] timerqueue_del 0.03% 0.03% noploop [kernel.kallsyms] [k] sched_clock_cpu 0.02% 0.00% noploop [kernel.kallsyms] [k] account_user_time 0.01% 0.00% noploop [kernel.kallsyms] [k] __alloc_pages_nodemask 0.00% 0.00% noploop [kernel.kallsyms] [k] native_write_msr_safe 0.00% 0.11% noploop [kernel.kallsyms] [k] _raw_spin_lock 0.00% 0.06% noploop [kernel.kallsyms] [k] find_get_page 0.00% 0.02% noploop [kernel.kallsyms] [k] rcu_check_callbacks 0.00% 0.02% noploop [kernel.kallsyms] [k] __current_kernel_time As you can see the Overhead column now contains both of ref-cycles and cycles and header line shows group information also - 'anon group { ref-cycles, cycles }'. The output is sorted by period of group leader first. - Initial GTK+ annotate browser, from Namhyung Kim. - Add option for runtime switching perf data file in perf report, just press 's' and a menu with the valid files found in the current directory will be presented, from Feng Tang. - Add support to display whole group data for raw columns, from Jiri Olsa. - Add per processor socket count aggregation in perf stat, from Stephane Eranian. - Add interval printing in 'perf stat', from Stephane Eranian. - 'perf test' improvements - Add support for wildcards in tracepoint system name, from Jiri Olsa. - Add anonymous huge page recognition, from Joshua Zhu. - perf build-id cache now can show DSOs present in a perf.data file that are not in the cache, to integrate with build-id servers being put in place by organizations such as Fedora. - perf top now shares more of the evsel config/creation routines with 'record', paving the way for further integration like 'top' snapshots, etc. - perf top now supports DWARF callchains. - Fix mmap limitations on 32-bit, fix from David Miller. - 'perf bench numa mem' NUMA performance measurement suite - ... and lots of fixes, performance improvements, cleanups and other improvements I failed to list - see the shortlog and git log for details." * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (270 commits) perf/x86/amd: Enable northbridge performance counters on AMD family 15h perf/hwbp: Fix cleanup in case of kzalloc failure perf tools: Fix build with bison 2.3 and older. perf tools: Limit unwind support to x86 archs perf annotate: Make it to be able to skip unannotatable symbols perf gtk/annotate: Fail early if it can't annotate perf gtk/annotate: Show source lines with gray color perf gtk/annotate: Support multiple event annotation perf ui/gtk: Implement basic GTK2 annotation browser perf annotate: Fix warning message on a missing vmlinux perf buildid-cache: Add --update option uprobes/perf: Avoid uprobe_apply() whenever possible uprobes/perf: Teach trace_uprobe/perf code to use UPROBE_HANDLER_REMOVE uprobes/perf: Teach trace_uprobe/perf code to pre-filter uprobes/perf: Teach trace_uprobe/perf code to track the active perf_event's uprobes: Introduce uprobe_apply() perf: Introduce hw_perf_event->tp_target and ->tp_list uprobes/perf: Always increment trace_uprobe->nhit uprobes/tracing: Kill uprobe_trace_consumer, embed uprobe_consumer into trace_uprobe uprobes/tracing: Introduce is_trace_uprobe_enabled() ...
2013-02-19Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq core changes from Ingo Molnar: "The biggest changes are the IRQ-work and printk changes from Frederic Weisbecker, which prepare the code for 'full dynticks' (the ability to stop or slow down the periodic tick arbitrarily, not just in idle time as today): - Don't stop tick with irq works pending. This fix is generally useful and concerns archs that can't raise self IPIs. - Flush irq works before CPU offlining. - Introduce "lazy" irq works that can wait for the next tick to be executed, unless it's stopped. - Implement klogd wake up using irq work. This removes the ad-hoc printk_tick()/printk_needs_cpu() hooks and make it working even in dynticks mode. - Cleanups and fixes." * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Export enable/disable_percpu_irq() arch Kconfig: Remove references to IRQ_PER_CPU irq_work: Remove return value from the irq_work_queue() function genirq: Avoid deadlock in spurious handling printk: Wake up klogd using irq_work irq_work: Make self-IPIs optable irq_work: Warn if there's still work on cpu_down irq_work: Flush work on CPU_DYING irq_work: Don't stop the tick with pending works nohz: Add API to check tick state irq_work: Remove CONFIG_HAVE_IRQ_WORK irq_work: Fix racy check on work pending flag irq_work: Fix racy IRQ_WORK_BUSY flag setting
2013-02-19Merge tag 'arm-imx-clk-fixes' of git://git.pengutronix.de/git/imx/linux-2.6 ↵Arnd Bergmann
into next/fixes-non-critical ARM: i.MX: clock fixes - fix wrong timer clock on i.MX25 leading to strange timing inconsistencies - fix SPI clocks for i.MX27 * tag 'arm-imx-clk-fixes' of git://git.pengutronix.de/git/imx/linux-2.6: ARM: i.MX25: clk: parent per5_clk to AHB clock ARM: imx27: clk-imx27: SPI: Rename IPG clock and add PER clock Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-02-19ARM: SPEAr13xx: Enable CONFIG_ARCH_HAS_CPUFREQViresh Kumar
SPEAr13xx supports cpufreq and has an upstreamed driver for it. This patch enables cpufreq configs for SPEAr13xx. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-02-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net into netDavid S. Miller
Pull in 'net' to take in the bug fixes that didn't make it into 3.8-final. Also, deal with the semantic conflict of the change made to net/ipv6/xfrm6_policy.c A missing rt6->n neighbour release was added to 'net', but in 'net-next' we no longer cache the neighbour entries in the ipv6 routes so that change is not appropriate there. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18Merge branch 'release' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (35 commits) PM idle: remove global declaration of pm_idle unicore32 idle: delete stray pm_idle comment openrisc idle: delete pm_idle mn10300 idle: delete pm_idle microblaze idle: delete pm_idle m32r idle: delete pm_idle, and other dead idle code ia64 idle: delete pm_idle cris idle: delete idle and pm_idle ARM64 idle: delete pm_idle ARM idle: delete pm_idle blackfin idle: delete pm_idle sparc idle: rename pm_idle to sparc_idle sh idle: rename global pm_idle to static sh_idle x86 idle: rename global pm_idle to static x86_idle APM idle: register apm_cpu_idle via cpuidle tools/power turbostat: display SMI count by default intel_idle: export both C1 and C1E cpuidle: remove vestage definition of cpuidle_state_usage.driver_data x86 idle: remove 32-bit-only "no-hlt" parameter, hlt_works_ok flag x86 idle: remove mwait_idle() and "idle=mwait" cmdline param ... Conflicts: arch/x86/kernel/process.c (with PM / tracing commit 43720bd) drivers/acpi/processor_idle.c (with ACPICA commit 4f84291)
2013-02-18Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/iwlwifi/dvm/tx.c drivers/net/wireless/ti/wlcore/sdio.c drivers/net/wireless/ti/wlcore/spi.c
2013-02-18x86/memtest: Shorten time for testsAlexander Holler
By just reversing the order memtest is using the test patterns, an additional round to zero the memory is not necessary. This might save up to a second or even more for setups which are doing tests on every boot. Signed-off-by: Alexander Holler <holler@ahsoftware.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1361029097-8308-1-git-send-email-holler@ahsoftware.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-02-18Merge branch 'misc' into releaseLen Brown
Conflicts: arch/x86/kernel/process.c Signed-off-by: Len Brown <len.brown@intel.com>
2013-02-18Merge branches 'idle-remove-statedata', 'pm_idle' and 'idle-hsw-turbostat' ↵Len Brown
into release
2013-02-17unicore32 idle: delete stray pm_idle commentLen Brown
as pm_idle() has already been deleted from this code, the comment was a stray. Signed-off-by: Len Brown <len.brown@intel.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
2013-02-17openrisc idle: delete pm_idleLen Brown
pm_idle() on openrisc was dead code. Signed-off-by: Len Brown <len.brown@intel.com> Cc: linux@lists.openrisc.net
2013-02-17mn10300 idle: delete pm_idleLen Brown
pm_idle on mn10300 served no purpose. Signed-off-by: Len Brown <len.brown@intel.com> Cc: linux-am33-list@redhat.com
2013-02-17microblaze idle: delete pm_idleLen Brown
pm_idle on microblaze served no purpose. Signed-off-by: Len Brown <len.brown@intel.com> Cc: microblaze-uclinux@itee.uq.edu.au
2013-02-17m32r idle: delete pm_idle, and other dead idle codeLen Brown
All paths on m32r lead to cpu_relax(). So delete the dead code and simply call cpu_relax() directly. Signed-off-by: Len Brown <len.brown@intel.com> Cc: linux-m32r@ml.linux-m32r.org
2013-02-17ia64 idle: delete pm_idleLen Brown
pm_idle() on ia64 was a synonym for default_idle(). So simply invoke default_idle() directly. Signed-off-by: Len Brown <len.brown@intel.com> Cc: linux-ia64@vger.kernel.org