aboutsummaryrefslogtreecommitdiff
path: root/arch/x86/oprofile
AgeCommit message (Collapse)Author
2012-10-28oprofile, x86: Fix wrapping bug in op_x86_get_ctrl()Dan Carpenter
commit 44009105081b51417f311f4c3be0061870b6b8ed upstream. The "event" variable is a u16 so the shift will always wrap to zero making the line a no-op. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2011-12-09oprofile, x86: Fix crash when unloading module (nmi timer mode)Robert Richter
commit 97f7f8189fe54e3cfe324ef9ad35064f3d2d3bff upstream. If oprofile uses the nmi timer interrupt there is a crash while unloading the module. The bug can be triggered with oprofile build as module and kernel parameter nolapic set. This patch fixes this. oprofile: using NMI timer interrupt. BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [<ffffffff8123c226>] unregister_syscore_ops+0x41/0x58 PGD 42dbca067 PUD 41da6a067 PMD 0 Oops: 0002 [#1] PREEMPT SMP CPU 5 Modules linked in: oprofile(-) [last unloaded: oprofile] Pid: 2518, comm: modprobe Not tainted 3.1.0-rc7-00019-gb2fb49d #19 Advanced Micro Device Anaheim/Anaheim RIP: 0010:[<ffffffff8123c226>] [<ffffffff8123c226>] unregister_syscore_ops+0x41/0x58 RSP: 0018:ffff88041ef71e98 EFLAGS: 00010296 RAX: 0000000000000000 RBX: ffffffffa0017100 RCX: dead000000200200 RDX: 0000000000000000 RSI: dead000000100100 RDI: ffffffff8178c620 RBP: ffff88041ef71ea8 R08: 0000000000000001 R09: 0000000000000082 R10: 0000000000000000 R11: ffff88041ef71de8 R12: 0000000000000080 R13: fffffffffffffff5 R14: 0000000000000001 R15: 0000000000610210 FS: 00007fc902f20700(0000) GS:ffff88042fd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000008 CR3: 000000041cdb6000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process modprobe (pid: 2518, threadinfo ffff88041ef70000, task ffff88041d348040) Stack: ffff88041ef71eb8 ffffffffa0017790 ffff88041ef71eb8 ffffffffa0013532 ffff88041ef71ec8 ffffffffa00132d6 ffff88041ef71ed8 ffffffffa00159b2 ffff88041ef71f78 ffffffff81073115 656c69666f72706f 0000000000610200 Call Trace: [<ffffffffa0013532>] op_nmi_exit+0x15/0x17 [oprofile] [<ffffffffa00132d6>] oprofile_arch_exit+0xe/0x10 [oprofile] [<ffffffffa00159b2>] oprofile_exit+0x1e/0x20 [oprofile] [<ffffffff81073115>] sys_delete_module+0x1c3/0x22f [<ffffffff811bf09e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff8148070b>] system_call_fastpath+0x16/0x1b Code: 20 c6 78 81 e8 c5 cc 23 00 48 8b 13 48 8b 43 08 48 be 00 01 10 00 00 00 ad de 48 b9 00 02 20 00 00 00 ad de 48 c7 c7 20 c6 78 81 89 42 08 48 89 10 48 89 33 48 89 4b 08 e8 a6 c0 23 00 5a 5b RIP [<ffffffff8123c226>] unregister_syscore_ops+0x41/0x58 RSP <ffff88041ef71e98> CR2: 0000000000000008 ---[ end trace 43a541a52956b7b0 ]--- Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-04oprofile, x86: Fix nmi-unsafe callgraph supportRobert Richter
commit a0e3e70243f5b270bc3eca718f0a9fa5e6b8262e upstream. Current oprofile's x86 callgraph support may trigger page faults throwing the BUG_ON(in_nmi()) message below. This patch fixes this by using the same nmi-safe copy-from-user code as in perf. ------------[ cut here ]------------ kernel BUG at .../arch/x86/kernel/traps.c:436! invalid opcode: 0000 [#1] SMP last sysfs file: /sys/devices/pci0000:00/0000:00:0a.0/0000:07:00.0/0000:08:04.0/net/eth0/broadcast CPU 5 Modules linked in: Pid: 8611, comm: opcontrol Not tainted 2.6.39-00007-gfe47ae7 #1 Advanced Micro Device Anaheim/Anaheim RIP: 0010:[<ffffffff813e8e35>] [<ffffffff813e8e35>] do_nmi+0x22/0x1ee RSP: 0000:ffff88042fd47f28 EFLAGS: 00010002 RAX: ffff88042c0a7fd8 RBX: 0000000000000001 RCX: 00000000c0000101 RDX: 00000000ffff8804 RSI: ffffffffffffffff RDI: ffff88042fd47f58 RBP: ffff88042fd47f48 R08: 0000000000000004 R09: 0000000000001484 R10: 0000000000000001 R11: 0000000000000000 R12: ffff88042fd47f58 R13: 0000000000000000 R14: ffff88042fd47d98 R15: 0000000000000020 FS: 00007fca25e56700(0000) GS:ffff88042fd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000074 CR3: 000000042d28b000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process opcontrol (pid: 8611, threadinfo ffff88042c0a6000, task ffff88042c532310) Stack: 0000000000000000 0000000000000001 ffff88042c0a7fd8 0000000000000000 ffff88042fd47de8 ffffffff813e897a 0000000000000020 ffff88042fd47d98 0000000000000000 ffff88042c0a7fd8 ffff88042fd47de8 0000000000000074 Call Trace: <NMI> [<ffffffff813e897a>] nmi+0x1a/0x20 [<ffffffff813f08ab>] ? bad_to_user+0x25/0x771 <<EOE>> Code: ff 59 5b 41 5c 41 5d c9 c3 55 65 48 8b 04 25 88 b5 00 00 48 89 e5 41 55 41 54 49 89 fc 53 48 83 ec 08 f6 80 47 e0 ff ff 04 74 04 <0f> 0b eb fe 81 80 44 e0 ff ff 00 00 01 04 65 ff 04 25 c4 0f 01 RIP [<ffffffff813e8e35>] do_nmi+0x22/0x1ee RSP <ffff88042fd47f28> ---[ end trace ed6752185092104b ]--- Kernel panic - not syncing: Fatal exception in interrupt Pid: 8611, comm: opcontrol Tainted: G D 2.6.39-00007-gfe47ae7 #1 Call Trace: <NMI> [<ffffffff813e5e0a>] panic+0x8c/0x188 [<ffffffff813e915c>] oops_end+0x81/0x8e [<ffffffff8100403d>] die+0x55/0x5e [<ffffffff813e8c45>] do_trap+0x11c/0x12b [<ffffffff810023c8>] do_invalid_op+0x91/0x9a [<ffffffff813e8e35>] ? do_nmi+0x22/0x1ee [<ffffffff8131e6fa>] ? oprofile_add_sample+0x83/0x95 [<ffffffff81321670>] ? op_amd_check_ctrs+0x4f/0x2cf [<ffffffff813ee4d5>] invalid_op+0x15/0x20 [<ffffffff813e8e35>] ? do_nmi+0x22/0x1ee [<ffffffff813e8e7a>] ? do_nmi+0x67/0x1ee [<ffffffff813e897a>] nmi+0x1a/0x20 [<ffffffff813f08ab>] ? bad_to_user+0x25/0x771 <<EOE>> Cc: John Lumby <johnlumby@hotmail.com> Cc: Maynard Johnson <maynardj@us.ibm.com> Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-15oprofile, x86: Fix race in nmi handler while starting countersRobert Richter
In some rare cases, nmis are generated immediately after the nmi handler of the cpu was started. This causes the counter not to be enabled. Before enabling the nmi handlers we need to set variable ctr_running first and make sure its value is written to memory. Also, the patch makes all existing barriers a memory barrier instead of a compiler barrier only. Reported-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: <stable@kernel.org> # .35+ Signed-off-by: Robert Richter <robert.richter@amd.com>
2011-06-08Merge branch 'urgent' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile into perf/urgent
2011-05-30oprofile, x86: Add comments to IBS LVT offset initializationRobert Richter
Adding a comment in the code as IBS LVT setup is not obvious at all ... Signed-off-by: Robert Richter <robert.richter@amd.com>
2011-05-27Merge branch 'urgent' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile into perf/urgent
2011-05-20oprofile, x86: Enable preemption during pci device setup in IBS initRobert Richter
IBS initialization is a mix of per-core register access and per-node pci device setup. Register access should be pinned to the cpu, but pci setup must run with preemption enabled. This patch better separates the code into non-/preemptible sections and fixes sleeping with preemption disabled. See bug message below. Fixes also freeing the eilvt entry by introducing put_eilvt(). BUG: sleeping function called from invalid context at mm/slub.c:824 in_atomic(): 1, irqs_disabled(): 0, pid: 32357, name: modprobe INFO: lockdep is turned off. Pid: 32357, comm: modprobe Not tainted 2.6.39-rc7+ #14 Call Trace: [<ffffffff8104bdc8>] __might_sleep+0x112/0x117 [<ffffffff81129693>] kmem_cache_alloc_trace+0x4b/0xe7 [<ffffffff81278f14>] kzalloc.constprop.0+0x29/0x2b [<ffffffff81278f4c>] pci_get_subsys+0x36/0x78 [<ffffffff81022689>] ? setup_APIC_eilvt+0xfb/0x139 [<ffffffff81278fa4>] pci_get_device+0x16/0x18 [<ffffffffa06c8b5d>] op_amd_init+0xd3/0x211 [oprofile] [<ffffffffa064d000>] ? 0xffffffffa064cfff [<ffffffffa064d298>] op_nmi_init+0x21e/0x26a [oprofile] [<ffffffffa064d062>] oprofile_arch_init+0xe/0x26 [oprofile] [<ffffffffa064d010>] oprofile_init+0x10/0x42 [oprofile] [<ffffffff81002099>] do_one_initcall+0x7f/0x13a [<ffffffff81096524>] sys_init_module+0x132/0x281 [<ffffffff814cc682>] system_call_fastpath+0x16/0x1b Reported-by: Dave Jones <davej@redhat.com> Cc: <stable@kernel.org> [2.6.37.x] Signed-off-by: Robert Richter <robert.richter@amd.com>
2011-05-12x86: Remove warning and warning_symbol from struct stacktrace_opsRichard Weinberger
Both warning and warning_symbol are nowhere used. Let's get rid of them. Signed-off-by: Richard Weinberger <richard@nod.at> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Huang Ying <ying.huang@intel.com> Cc: Soeren Sandmann Pedersen <ssp@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: x86 <x86@kernel.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Robert Richter <robert.richter@amd.com> Cc: Paul Mundt <lethal@linux-sh.org> Link: http://lkml.kernel.org/r/1305205872-10321-2-git-send-email-richard@nod.at Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2011-03-29Merge branch 'core' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile into perf/urgent
2011-03-24oprofile, x86: Allow setting EDGE/INV/CMASK for counter eventsAndi Kleen
For some performance events it's useful to set the EDGE and INV bits and the CMASK mask in the counter control register. The list of predefined events Intel releases for each CPU has some events which require these settings to get more "natural" to use higher level events. oprofile currently doesn't allow this. This patch adds new extra configuration fields for them, so that they can be specified in oprofilefs. An updated oprofile daemon can then make use of this to set them. v2: Write back masked extra value to variable. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Robert Richter <robert.richter@amd.com>
2011-03-23x86: Use syscore_ops instead of sysdev classes and sysdevsRafael J. Wysocki
Some subsystems in the x86 tree need to carry out suspend/resume and shutdown operations with one CPU on-line and interrupts disabled and they define sysdev classes and sysdevs or sysdev drivers for this purpose. This leads to unnecessarily complicated code and excessive memory usage, so switch them to using struct syscore_ops objects for this purpose instead. Generally, there are three categories of subsystems that use sysdevs for implementing PM operations: (1) subsystems whose suspend/resume callbacks ignore their arguments entirely (the majority), (2) subsystems whose suspend/resume callbacks use their struct sys_device argument, but don't really need to do that, because they can be implemented differently in an arguably simpler way (io_apic.c), and (3) subsystems whose suspend/resume callbacks use their struct sys_device argument, but the value of that argument is always the same and could be ignored (microcode_core.c). In all of these cases the subsystems in question may be readily converted to using struct syscore_ops objects for power management and shutdown. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu>
2011-03-18Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Flush TLB if PGD entry is changed in i386 PAE mode x86, dumpstack: Correct stack dump info when frame pointer is available x86: Clean up csum-copy_64.S a bit x86: Fix common misspellings x86: Fix misspelling and align params x86: Use PentiumPro-optimized partial_csum() on VIA C7
2011-03-18x86, dumpstack: Correct stack dump info when frame pointer is availableNamhyung Kim
Current stack dump code scans entire stack and check each entry contains a pointer to kernel code. If CONFIG_FRAME_POINTER=y it could mark whether the pointer is valid or not based on value of the frame pointer. Invalid entries could be preceded by '?' sign. However this was not going to happen because scan start point was always higher than the frame pointer so that they could not meet. Commit 9c0729dc8062 ("x86: Eliminate bp argument from the stack tracing routines") delayed bp acquisition point, so the bp was read in lower frame, thus all of the entries were marked invalid. This patch fixes this by reverting above commit while retaining stack_frame() helper as suggested by Frederic Weisbecker. End result looks like below: before: [ 3.508329] Call Trace: [ 3.508551] [<ffffffff814f35c9>] ? panic+0x91/0x199 [ 3.508662] [<ffffffff814f3739>] ? printk+0x68/0x6a [ 3.508770] [<ffffffff81a981b2>] ? mount_block_root+0x257/0x26e [ 3.508876] [<ffffffff81a9821f>] ? mount_root+0x56/0x5a [ 3.508975] [<ffffffff81a98393>] ? prepare_namespace+0x170/0x1a9 [ 3.509216] [<ffffffff81a9772b>] ? kernel_init+0x1d2/0x1e2 [ 3.509335] [<ffffffff81003894>] ? kernel_thread_helper+0x4/0x10 [ 3.509442] [<ffffffff814f6880>] ? restore_args+0x0/0x30 [ 3.509542] [<ffffffff81a97559>] ? kernel_init+0x0/0x1e2 [ 3.509641] [<ffffffff81003890>] ? kernel_thread_helper+0x0/0x10 after: [ 3.522991] Call Trace: [ 3.523351] [<ffffffff814f35b9>] panic+0x91/0x199 [ 3.523468] [<ffffffff814f3729>] ? printk+0x68/0x6a [ 3.523576] [<ffffffff81a981b2>] mount_block_root+0x257/0x26e [ 3.523681] [<ffffffff81a9821f>] mount_root+0x56/0x5a [ 3.523780] [<ffffffff81a98393>] prepare_namespace+0x170/0x1a9 [ 3.523885] [<ffffffff81a9772b>] kernel_init+0x1d2/0x1e2 [ 3.523987] [<ffffffff81003894>] kernel_thread_helper+0x4/0x10 [ 3.524228] [<ffffffff814f6880>] ? restore_args+0x0/0x30 [ 3.524345] [<ffffffff81a97559>] ? kernel_init+0x0/0x1e2 [ 3.524445] [<ffffffff81003890>] ? kernel_thread_helper+0x0/0x10 -v5: * fix build breakage with oprofile -v4: * use 0 instead of regs->bp * separate out printk changes -v3: * apply comment from Frederic * add a couple of printk fixes Signed-off-by: Namhyung Kim <namhyung@gmail.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Soren Sandmann <ssp@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Robert Richter <robert.richter@amd.com> LKML-Reference: <1300416006-3163-1-git-send-email-namhyung@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-19Kill off warning: ‘inline’ is not at beginning of declarationJesper Juhl
Fix a bunch of warning: ‘inline’ is not at beginning of declaration messages when building a 'make allyesconfig' kernel with -Wextra. These warnings are trivial to kill, yet rather annoying when building with -Wextra. The more we can cut down on pointless crap like this the better (IMHO). A previous patch to do this for a 'allnoconfig' build has already been merged. This just takes the cleanup a little further. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-11Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (28 commits) perf session: Fix infinite loop in __perf_session__process_events perf evsel: Support perf_evsel__open(cpus > 1 && threads > 1) perf sched: Use PTHREAD_STACK_MIN to avoid pthread_attr_setstacksize() fail perf tools: Emit clearer message for sys_perf_event_open ENOENT return perf stat: better error message for unsupported events perf sched: Fix allocation result check perf, x86: P4 PMU - Fix unflagged overflows handling dynamic debug: Fix build issue with older gcc tracing: Fix TRACE_EVENT power tracepoint creation tracing: Fix preempt count leak tracepoint: Add __rcu annotation tracing: remove duplicate null-pointer check in skb tracepoint tracing/trivial: Add missing comma in TRACE_EVENT comment tracing: Include module.h in define_trace.h x86: Save rbp in pt_regs on irq entry x86, dumpstack: Fix unused variable warning x86, NMI: Clean-up default_do_nmi() x86, NMI: Allow NMI reason io port (0x61) to be processed on any CPU x86, NMI: Remove DIE_NMI_IPI x86, NMI: Add priorities to handlers ...
2011-01-09Merge branch 'tip/perf/core' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/urgent
2011-01-07Merge branch 'for-2.6.38' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu * 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (30 commits) gameport: use this_cpu_read instead of lookup x86: udelay: Use this_cpu_read to avoid address calculation x86: Use this_cpu_inc_return for nmi counter x86: Replace uses of current_cpu_data with this_cpu ops x86: Use this_cpu_ops to optimize code vmstat: User per cpu atomics to avoid interrupt disable / enable irq_work: Use per cpu atomics instead of regular atomics cpuops: Use cmpxchg for xchg to avoid lock semantics x86: this_cpu_cmpxchg and this_cpu_xchg operations percpu: Generic this_cpu_cmpxchg() and this_cpu_xchg support percpu,x86: relocate this_cpu_add_return() and friends connector: Use this_cpu operations xen: Use this_cpu_inc_return taskstats: Use this_cpu_ops random: Use this_cpu_inc_return fs: Use this_cpu_inc_return in buffer.c highmem: Use this_cpu_xx_return() operations vmstat: Use this_cpu_inc_return for vm statistics x86: Support for this_cpu_add, sub, dec, inc_return percpu: Generic support for this_cpu_add, sub, dec, inc_return ... Fixed up conflicts: in arch/x86/kernel/{apic/nmi.c, apic/x2apic_uv_x.c, process.c} as per Tejun.
2011-01-07x86, NMI: Remove DIE_NMI_IPIDon Zickus
With priorities in place and no one really understanding the difference between DIE_NMI and DIE_NMI_IPI, just remove DIE_NMI_IPI and convert everyone to DIE_NMI. This also simplifies default_do_nmi() a little bit. Instead of calling the die_notifier in both the if and else part, just pull it out and call it before the if-statement. This has the side benefit of avoiding a call to the ioport to see if there is an external NMI sitting around until after the (more frequent) internal NMIs are dealt with. Patch-Inspired-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294348732-15030-5-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07x86, NMI: Add priorities to handlersDon Zickus
In order to consolidate the NMI die_chain events, we need to setup the priorities for the die notifiers. I started by defining a bunch of common priorities that can be used by the notifier blocks. Then I modified the notifier blocks to use the newly created priorities. Now that the priorities are straightened out, it should be easier to remove the event DIE_NMI_IPI. Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294348732-15030-4-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-06Merge branch 'x86-mce-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: apic, amd: Make firmware bug messages more meaningful mce, amd: Remove goto in threshold_create_device() mce, amd: Add helper functions to setup APIC mce, amd: Shorten local variables mci_misc_{hi,lo} mce, amd: Implement mce_threshold_block_init() helper function
2011-01-05Merge commit 'v2.6.37' into perf/coreIngo Molnar
Merge reason: Add the final .37 tree. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-03arch/x86/oprofile/op_model_amd.c: Perform initialisation on a single CPURobert Richter
Disable preemption in init_ibs(). The function only checks the ibs capabilities and sets up pci devices (if necessary). It runs only on one cpu but operates with the local APIC and some MSRs, thus it is better to disable preemption. [ 7.034377] BUG: using smp_processor_id() in preemptible [00000000] code: modprobe/483 [ 7.034385] caller is setup_APIC_eilvt+0x155/0x180 [ 7.034389] Pid: 483, comm: modprobe Not tainted 2.6.37-rc1-20101110+ #1 [ 7.034392] Call Trace: [ 7.034400] [<ffffffff812a2b72>] debug_smp_processor_id+0xd2/0xf0 [ 7.034404] [<ffffffff8101e985>] setup_APIC_eilvt+0x155/0x180 [ ... ] Addresses https://bugzilla.kernel.org/show_bug.cgi?id=22812 Reported-by: <atswartz@gmail.com> Signed-off-by: Robert Richter <robert.richter@amd.com> Cc: oprofile-list@lists.sourceforge.net <oprofile-list@lists.sourceforge.net> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Dan Carpenter <error27@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: <stable@kernel.org> [2.6.37.x] LKML-Reference: <20110103111514.GM4739@erda.amd.com> [ small cleanups ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-30x86: Replace uses of current_cpu_data with this_cpu opsTejun Heo
Replace all uses of current_cpu_data with this_cpu operations on the per cpu structure cpu_info. The scala accesses are replaced with the matching this_cpu ops which results in smaller and more efficient code. In the long run, it might be a good idea to remove cpu_data() macro too and use per_cpu macro directly. tj: updated description Cc: Yinghai Lu <yinghai@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: H. Peter Anvin <hpa@zytor.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2010-12-30x86: Use this_cpu_ops to optimize codeTejun Heo
Go through x86 code and replace __get_cpu_var and get_cpu_var instances that refer to a scalar and are not used for address determinations. Cc: Yinghai Lu <yinghai@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2010-12-30Merge branch 'core' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile into perf/core
2010-12-22x86, nmi_watchdog: Remove ARCH_HAS_NMI_WATCHDOG and rely on ↵Don Zickus
CONFIG_HARDLOCKUP_DETECTOR The x86 arch has shifted its use of the nmi_watchdog from a local implementation to the global one provide by kernel/watchdog.c. This shift has caused a whole bunch of compile problems under different config options. I attempt to simplify things with the patch below. In order to simplify things, I had to come to terms with the meaning of two terms ARCH_HAS_NMI_WATCHDOG and CONFIG_HARDLOCKUP_DETECTOR. Basically they mean the same thing, the former on a local level and the latter on a global level. With the old x86 nmi watchdog gone, there is no need to rely on defining the ARCH_HAS_NMI_WATCHDOG variable because it doesn't make sense any more. x86 will now use the global implementation. The changes below do a few things. First it changes the few places that relied on ARCH_HAS_NMI_WATCHDOG to use CONFIG_X86_LOCAL_APIC (the former was an alias for the latter anyway, so nothing unusual here). Those pieces of code were relying more on local apic functionality the nmi watchdog functionality, so the change should make sense. Second, I removed the x86 implementation of touch_nmi_watchdog(). It isn't need now, instead x86 will rely on kernel/watchdog.c's implementation. Third, I removed the #define ARCH_HAS_NMI_WATCHDOG itself from x86. And tweaked the include/linux/nmi.h file to tell users to look for an externally defined touch_nmi_watchdog in the case of ARCH_HAS_NMI_WATCHDOG _or_ CONFIG_HARDLOCKUP_DETECTOR. This changes removes some of the ugliness in that file. Finally, I added a Kconfig dependency for CONFIG_HARDLOCKUP_DETECTOR that said you can't have ARCH_HAS_NMI_WATCHDOG _and_ CONFIG_HARDLOCKUP_DETECTOR. You can only have one nmi_watchdog. Tested with ARCH=i386: allnoconfig, defconfig, allyesconfig, (various broken configs) ARCH=x86_64: allnoconfig, defconfig, allyesconfig, (various broken configs) Hopefully, after this patch I won't get any more compile broken emails. :-) v3: changed a couple of 'linux/nmi.h' -> 'asm/nmi.h' to pick-up correct function prototypes when CONFIG_HARDLOCKUP_DETECTOR is not set. Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: fweisbec@gmail.com LKML-Reference: <1293044403-14117-1-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-19oprofile, x86: Add support for 6 counters (AMD family 15h)Robert Richter
This patch adds support for up to 6 hardware counters for AMD family 15h cpus. There is a new MSR range for hardware counters beginning at MSRC001_0200 Performance Event Select (PERF_CTL0). Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-12-19oprofile, x86: Add support for AMD family 15hRobert Richter
This patch adds support for AMD family 15h (Interlagos/Valencia/ Zambezi) cpus. Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-11-18Merge branch 'perf/core' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into perf/core
2010-11-18x86: Eliminate bp argument from the stack tracing routinesSoeren Sandmann Pedersen
The various stack tracing routines take a 'bp' argument in which the caller is supposed to provide the base pointer to use, or 0 if doesn't have one. Since bp is garbage whenever CONFIG_FRAME_POINTER is not defined, this means all callers in principle should either always pass 0, or be conditional on CONFIG_FRAME_POINTER. However, there are only really three use cases for stack tracing: (a) Trace the current task, including IRQ stack if any (b) Trace the current task, but skip IRQ stack (c) Trace some other task In all cases, if CONFIG_FRAME_POINTER is not defined, bp should just be 0. If it _is_ defined, then - in case (a) bp should be gotten directly from the CPU's register, so the caller should pass NULL for regs, - in case (b) the caller should should pass the IRQ registers to dump_trace(), - in case (c) bp should be gotten from the top of the task's stack, so the caller should pass NULL for regs. Hence, the bp argument is not necessary because the combination of task and regs is sufficient to determine an appropriate value for bp. This patch introduces a new inline function stack_frame(task, regs) that computes the desired bp. This function is then called from the two versions of dump_stack(). Signed-off-by: Soren Sandmann <ssp@redhat.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arjan van de Ven <arjan@infradead.org>, Cc: Frederic Weisbecker <fweisbec@gmail.com>, Cc: Arnaldo Carvalho de Melo <acme@redhat.com>, LKML-Reference: <m3oc9rop28.fsf@dhcp-100-3-82.bos.redhat.com>> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-11-18x86, nmi_watchdog: Remove all stub function calls from old nmi_watchdogDon Zickus
Now that the bulk of the old nmi_watchdog is gone, remove all the stub variables and hooks associated with it. This touches lots of files mainly because of how the io_apic nmi_watchdog was implemented. Now that the io_apic nmi_watchdog is forever gone, remove all its fingers. Most of this code was not being exercised by virtue of nmi_watchdog != NMI_IO_APIC, so there shouldn't be anything to risky here. Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: fweisbec@gmail.com Cc: gorcunov@openvz.org LKML-Reference: <1289578944-28564-3-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-25Merge branch 'x86' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile into perf/urgent
2010-10-25apic, amd: Make firmware bug messages more meaningfulRobert Richter
This improves error messages in case the BIOS was setting up wrong LVT offsets. Signed-off-by: Robert Richter <robert.richter@amd.com> Acked-by: Borislav Petkov <borislav.petkov@amd.com> LKML-Reference: <1288015419-29543-6-git-send-email-robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-25Merge branch 'oprofile/core' into oprofile/x86Robert Richter
Conflicts: arch/x86/oprofile/op_model_amd.c Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-10-25x86/oprofile: Fix uninitialized variable use in debug printkIngo Molnar
Stephen Rothwell reported this build warning: arch/x86/oprofile/op_model_amd.c: In function 'ibs_eilvt_valid': arch/x86/oprofile/op_model_amd.c:289: warning: 'offset' may be used uninitialized in this function And correctly observed that indeed the variable is used uninitialized in this function. The result of this bug can be a debug printk with a bogus value. Also fix a few more small details that made this function hard to read and which probably contributed to the bug being introduced to begin with: - Use more symmetric error conditions - Remove the !0 obfuscation - Add newlines to the printk output - Remove bogus linebreaks in printk strings and elsewhere Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Robert Richter <robert.richter@amd.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <20101025115736.41d51abe.sfr@canb.auug.org.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-21Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (96 commits) apic, x86: Use BIOS settings for IBS and MCE threshold interrupt LVT offsets apic, x86: Check if EILVT APIC registers are available (AMD only) x86: ioapic: Call free_irte only if interrupt remapping enabled arm: Use ARCH_IRQ_INIT_FLAGS genirq, ARM: Fix boot on ARM platforms genirq: Fix CONFIG_GENIRQ_NO_DEPRECATED=y build x86: Switch sparse_irq allocations to GFP_KERNEL genirq: Switch sparse_irq allocator to GFP_KERNEL genirq: Make sparse_lock a mutex x86: lguest: Use new irq allocator genirq: Remove the now unused sparse irq leftovers genirq: Sanitize dynamic irq handling genirq: Remove arch_init_chip_data() x86: xen: Sanitise sparse_irq handling x86: Use sane enumeration x86: uv: Clean up the direct access to irq_desc x86: Make io_apic.c local functions static genirq: Remove irq_2_iommu x86: Speed up the irq_remapped check in hot pathes intr_remap: Simplify the code further ... Fix up trivial conflicts in arch/x86/Kconfig
2010-10-20apic, x86: Use BIOS settings for IBS and MCE threshold interrupt LVT offsetsRobert Richter
We want the BIOS to setup the EILVT APIC registers. The offsets were hardcoded and BIOS settings were overwritten by the OS. Now, the subsystems for MCE threshold and IBS determine the LVT offset from the registers the BIOS has setup. If the BIOS setup is buggy on a family 10h system, a workaround enables IBS. If the OS determines an invalid register setup, a "[Firmware Bug]: " error message is reported. We need this change also for upcomming cpu families. Signed-off-by: Robert Richter <robert.richter@amd.com> LKML-Reference: <1286360874-1471-3-git-send-email-robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-15oprofile, x86: Add support for IBS periodic op counter extensionRobert Richter
The count value for IBS op sampling has been extended by 7 bits. The feature is reflected in bit 6 (OpCntExt) of the IBS capability register (CPUID Fn8000_001B_EAX). Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-10-15oprofile, x86: Add support for IBS branch target address reportingRobert Richter
This patch adds support for IBS branch target address reporting. A new MSR (MSRC001_103B IBS Branch Target Address) has been added that provides the logical address in canonical form for the branch target. The size of the IBS sample that is transferred to the userland has been increased. For backward compatibility, the userland daemon must explicit enable the feature by writing to the oprofilefs file ibs_op/branch_target After enabling branch target address reporting, the userland daemon must handle the extended size of the IBS sample. Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-10-15oprofile, x86: Introduce struct ibs_stateRobert Richter
This patch introduces struct ibs_state that will extended by additinal members in follow-on patches. Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-10-15oprofile, x86: Remove duplicate check for IBS_CAPS_OPCNTRobert Richter
Since oprofile is setting up ibs_op/dispatched_ops in the fs only if the feature is available, its corresponding variable ibs_config.dispatched_ops is only set, if the feature is available. Thus the check is duplicate and can be removed. Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-10-15oprofile, x86: Check IBS capability bits 1 and 2Robert Richter
There are IBS CPUID feature flags in CPUID Fn8000_001B to detect if the cpu supports IBS fetch sampling (FetchSam) and/or IBS execution sampling (OpSam). This patch adds checks if the both features are available. Spec: http://support.amd.com/us/Processor_TechDocs/31116.pdf Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-10-15oprofile, x86: Add support for AMD family 14hRobert Richter
This patch adds support for AMD family 14h (Ontario/Zacate) cpus. Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-10-15oprofile, x86: Add support for AMD family 12hRobert Richter
This patch adds support for AMD family 12h (Llano) cpus. Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-10-01oprofile, x86: Simplify init/exit functionsRobert Richter
Now, that we only call the exit function if init succeeds with commit: 979048e oprofile: don't call arch exit code from init code on failure we can simplify the x86 init/exit functions too. Variable using_nmi becomes obsolete. Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-10-01oprofile, x86: Adding backtrace dump for 32bit process in compat modeJiri Olsa
This patch implements the oprofile backtrace generation for 32 bit applications running in the 64bit environment (compat mode). With this change it's possible to get backtrace for 32bits applications under the 64bits environment using oprofile's callgraph options. opcontrol --setup -c ... opreport -l -cg ... Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-10-01oprofile, x86: Using struct stack_frame for 64bit processes dumpJiri Olsa
Removing unnecessary struct frame_head and replacing it with struct stack_frame. The struct stack_frame is already defined and used in other places in kernel, so there's no reason to define new structure. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-09-21oprofile: Add Support for Intel CPU Family 6 / Model 29Jiri Olsa
This patch adds CPU type detection for dunnington processor (Family 6 / Model 29) to be identified as core 2 family cpu type (wikipedia source). I tested oprofile on Intel(R) Xeon(R) CPU E7440 reporting itself as model 29, and it runs without an issue. Spec: http://www.intel.com/Assets/en_US/PDF/specupdate/320336.pdf Signed-off-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Andi Kleen <ak@linux.intel.com> Cc: stable@kernel.org Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-09-16oprofile: Add Support for Intel CPU Family 6 / Model 22 (Intel Celeron 540)Patrick Simmons
This patch adds CPU type detection for the Intel Celeron 540, which is part of the Core 2 family according to Wikipedia; the family and ID pair is absent from the Volume 3B table referenced in the source code comments. I have tested this patch on an Intel Celeron 540 machine reporting itself as Family 6 Model 22, and OProfile runs on the machine without issue. Spec: http://download.intel.com/design/mobile/SPECUPDT/317667.pdf Signed-off-by: Patrick Simmons <linuxrocks123@netscape.net> Acked-by: Andi Kleen <ak@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: stable@kernel.org Signed-off-by: Robert Richter <robert.richter@amd.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-24 05:51:20 +0000