| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (241 commits)
sched, trace: update trace_sched_wakeup()
tracing/ftrace: don't trace on early stage of a secondary cpu boot, v3
Revert "x86: disable X86_PTRACE_BTS"
ring-buffer: prevent false positive warning
ring-buffer: fix dangling commit race
ftrace: enable format arguments checking
x86, bts: memory accounting
x86, bts: add fork and exit handling
ftrace: introduce tracing_reset_online_cpus() helper
tracing: fix warnings in kernel/trace/trace_sched_switch.c
tracing: fix warning in kernel/trace/trace.c
tracing/ring-buffer: remove unused ring_buffer size
trace: fix task state printout
ftrace: add not to regex on filtering functions
trace: better use of stack_trace_enabled for boot up code
trace: add a way to enable or disable the stack tracer
x86: entry_64 - introduce FTRACE_ frame macro v2
tracing/ftrace: add the printk-msg-only option
tracing/ftrace: use preempt_enable_no_resched_notrace in ring_buffer_time_stamp()
x86, bts: correctly report invalid bts records
...
Fixed up trivial conflict in scripts/recordmcount.pl due to SH bits
being already partly merged by the SH merge.
|
|
Impact: clean up
Itroduce MCOUNT_SAVE/RESTORE_FRAME which allow us to
save a number of lines on source level.
Also fix a comment in ftrace.h.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: feature, let entry function decide to trace or not
This patch lets the graph tracer entry function decide if the tracing
should be done at the end as well. This requires all function graph
entry functions return 1 if it should trace, or 0 if the return should
not be traced.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: consistency change for function graph
This patch makes function graph record the mcount caller address
the same way the function tracer does.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: extend and enable the function graph tracer to 64-bit x86
This patch implements the support for function graph tracer under x86-64.
Both static and dynamic tracing are supported.
This causes some small CPP conditional asm on arch/x86/kernel/ftrace.c I
wanted to use probe_kernel_read/write to make the return address
saving/patching code more generic but it causes tracing recursion.
That would be perhaps useful to implement a notrace version of these
function for other archs ports.
Note that arch/x86/process_64.c is not traced, as in X86-32. I first
thought __switch_to() was responsible of crashes during tracing because I
believed current task were changed inside but that's actually not the
case (actually yes, but not the "current" pointer).
So I will have to investigate to find the functions that harm here, to
enable tracing of the other functions inside (but there is no issue at
this time, while process_64.c stays out of -pg flags).
A little possible race condition is fixed inside this patch too. When the
tracer allocate a return stack dynamically, the current depth is not
initialized before but after. An interrupt could occur at this time and,
after seeing that the return stack is allocated, the tracer could try to
trace it with a random uninitialized depth. It's a prevention, even if I
hadn't problems with it.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tim Bird <tim.bird@am.sony.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: remove dead code
If we take a closer look at the rff_trace/rff_action ret_from_fork code,
we have to realize that it does all the wrong things: for example it
checks the TIF flag - while later on jumping back to the ret-from-syscall
path - duplicating the check needlessly.
But checking for _TIF_SYSCALL_TRACE is completely unnecessary here because
we clear that flag for every freshly forked task. So the whole "tracing"
code here, for which there is a out of line jump optimization that makes
it even harder to read, is in reality completely dead code ...
Reported-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Tested-by: Cyrill Gorcunov <gorcunov@gmail.com>
|
|
We merge this branch because x86/debug touches code that we started
cleaning up in x86/irq. The two branches started out independent,
but as unexpected amount of activity went into x86/irq, they became
dependent. Resolve that by this cross-merge.
|
|
Impact: cleanup
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Acked-by: Cliff Wickman <cpw@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
child_rip is called not by its name but indirectly
rather so make it global and aligned.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Acked-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: cleanup
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Acked-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: clean up assembly macros and annotations - with some object impact
entry_64.S is the only user of KPROBE_ENTRY / KPROBE_END on
x86_64. This patch reorders entry_64.S and explicitly generates
a separate section for functions that need the protection. The
generated code before and after the patch is equal.
Implicitly changing sections in assembly files makes it more
difficult to follow why the assembler is doing certain things.
For example,
.p2align 5
KPROBE_ENTRY(...)
was not doing what you would expect. Other section changes
(__ex_table, .fixup, .init.rodata) are done explicitly already.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Acked-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: improve backtrace quality
avoid the confusion in call trace because of the lack of padding at the
tail of function.
When do_exit gets called, the return address behind call instruction is
pushed into stack. If something get wrong in do_exit, for x86_64, the
entry "kernel_execve +0x00/0xXX" rather than "child_rip +0xYY/0xZZ" is
in the call trace.
That looks confusing, so add a u2d to make the return address still part
of the original call site. (This also catches any instances of us returning
from that function somehow.)
Signed-off-by: jia zhang <jia.zhang2008@gmail.com>
Acked-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: move some code out of .kprobes.text
KPROBE_ENTRY switches code generation to .kprobes.text, and KPROBE_END
uses .popsection to get back to the previous section (.text, normally).
Also replace ENDPROC by END, for consistency.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: cleanup of entry_64.S
Except for the order and the place of the functions, this
patch should not change the generated code.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: cleanup
Move recently introduced dwarf2 macros to dwarf2.h file.
It allow us to not duplicate them in assembly files.
Active usage of _cfi macros don't make assembly files
more obvious to understand but we already have a lot of
macros there which requires to search the definitions
of them *anyway*. But at least it make every cfi usage
one line shorter.
Also some code alignment is done.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: fix bootup crash
Even though it tested fine for me, there was still a bug in the
first patch: I have overlooked a call to ptregscall_common. This
patch fixes that, I think, but the code is never executed for
me while running a debian install... (I tested this by putting
an "1:jmp 1b" in there.)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: cleanup
DISABLE_INTERRUPTS(CLBR_NONE)/TRACE_IRQS_OFF is now always
executed just before paranoid_exit. Move it there.
Split out paranoidzeroentry, paranoiderrorentry, and
paranoidzeroentry_ist to get more readable macro's.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: cleanup, shrink kernel image size
Also expand the paranoid_exit0 macro into nmi_exit inside the
nmi stub in the case of enabled irq-tracing.
This gives a few hundred bytes code size reduction.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: cleanup
The save_rest function completes a partial stack frame for use
by the PTREGSCALL macro. This also avoids the indirect call in
PTREGSCALLs.
This adds the macro movq_cfi_restore to hide the CFI_RESTORE
annotation when restoring a register from the stack frame.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: cleanup
Rename:
CFI_PUSHQ => pushq_cfi
CFI_POPQ => popq_cfi
CFI_MOVQ => movq_cfi
To make it blend better into regular assembly code.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: build fix
The break builds with older binutils (2.16.1):
arch/x86/kernel/entry_64.S: Assembler messages:
arch/x86/kernel/entry_64.S:282: Error: too many positional arguments
arch/x86/kernel/entry_64.S:283: Error: too many positional arguments
arch/x86/kernel/entry_64.S:284: Error: too many positional arguments
arch/x86/kernel/entry_64.S:285: Error: too many positional arguments
arch/x86/kernel/entry_64.S:286: Error: too many positional arguments
arch/x86/kernel/entry_64.S:287: Error: too many positional arguments
arch/x86/kernel/entry_64.S:288: Error: too many positional arguments
arch/x86/kernel/entry_64.S:289: Error: too many positional arguments
arch/x86/kernel/entry_64.S:290: Error: too many positional arguments
Took some time to figure out the detail that GAS chokes on: it's
negative offsets. Rearrange the calculations to make sure we never
go negative.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
This add-on patch to x86: move entry_64.S register saving out
of the macros visually cleans up the appearance of the code by
introducing some basic helper macro's. It also adds some cfi
annotations which were missing.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Here is a combined patch that moves "save_args" out-of-line for
the interrupt macro and moves "error_entry" mostly out-of-line
for the zeroentry and errorentry macros.
The save_args function becomes really straightforward and easy
to understand, with the possible exception of the stack switch
code, which now needs to copy the return address of to the
calling function. Normal interrupts arrive with ((~vector)-0x80)
on the stack, which gets adjusted in common_interrupt:
<common_interrupt>:
(5) addq $0xffffffffffffff80,(%rsp) /* -> ~(vector) */
(4) sub $0x50,%rsp /* space for registers */
(5) callq ffffffff80211290 <save_args>
(5) callq ffffffff80214290 <do_IRQ>
<ret_from_intr>:
...
An apic interrupt stub now look like this:
<thermal_interrupt>:
(5) pushq $0xffffffffffffff05 /* ~(vector) */
(4) sub $0x50,%rsp /* space for registers */
(5) callq ffffffff80211290 <save_args>
(5) callq ffffffff80212b8f <smp_thermal_interrupt>
(5) jmpq ffffffff80211f93 <ret_from_intr>
Similarly the exception handler register saving function becomes
simpler, without the need of any parameter shuffling. The stub
for an exception without errorcode looks like this:
<overflow>:
(6) callq *0x1cad12(%rip) # ffffffff803dd448 <pv_irq_ops+0x38>
(2) pushq $0xffffffffffffffff /* no syscall */
(4) sub $0x78,%rsp /* space for registers */
(5) callq ffffffff8030e3b0 <error_entry>
(3) mov %rsp,%rdi /* pt_regs pointer */
(2) xor %esi,%esi /* no error code */
(5) callq ffffffff80213446 <do_overflow>
(5) jmpq ffffffff8030e460 <error_exit>
And one for an exception with errorcode like this:
<segment_not_present>:
(6) callq *0x1cab92(%rip) # ffffffff803dd448 <pv_irq_ops+0x38>
(4) sub $0x78,%rsp /* space for registers */
(5) callq ffffffff8030e3b0 <error_entry>
(3) mov %rsp,%rdi /* pt_regs pointer */
(5) mov 0x78(%rsp),%rsi /* load error code */
(9) movq $0xffffffffffffffff,0x78(%rsp) /* no syscall */
(5) callq ffffffff80213209 <do_segment_not_present>
(5) jmpq ffffffff8030e460 <error_exit>
Unfortunately, this last type is more than 32 bytes. But the total space
savings due to this patch is about 2500 bytes on an smp-configuration,
and I think the code is clearer than it was before. The tested kernels
were non-paravirt ones (i.e., without the indirect call at the top of
the exception handlers).
Anyhow, I tested this patch on top of a recent -tip. The machine
was an 2x4-core Xeon at 2333MHz. Measured where the delays between
(almost-)adjacent rdtsc instructions. The graphs show how much
time is spent outside of the program as a function of the measured
delay. The area under the graph represents the total time spent
outside the program. Eight instances of the rdtsctest were
started, each pinned to a single cpu. The histogams are added.
For each kernel two measurements were done: one in mostly idle
condition, the other while running "bonnie++ -f", bound to cpu 0.
Each measurement took 40 minutes runtime. See the attached graphs
for the results. The graphs overlap almost everywhere, but there
are small differences.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
[ merged x86/cleanups into x86/irq to enable a wider IRQ entry code
patch to be applied, which depends on a cleanup patch in x86/cleanups. ]
|
|
Impact: cleanup
All blame goes to: color white,red "[^[:graph:]]+$"
in .nanorc ;).
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: Fix interrupt via the apicinterrupt macro
Checkin 939b787130bf22887a09d8fd2641a094dcef8c22 changed the
"interrupt" macro, but the "interrupt" macro is also invoked
indirectly from the "apicinterrupt" macro.
The "apicinterrupt" macro probably should have its own collection of
systematic stubs for the same reason the main IRQ code does; as is it
is a huge amount of replicated code.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
Older versions of gas don't implement the C-style != operator, they
instead want the Pascal-style <> operator. Change != to <> so we
don't break compilation with those old versions of gas.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
Move the IRQ stub generation to assembly to simplify it and for
consistency with 32 bits. Doing it in a C file with asm() statements
doesn't help clarity, and it prevents some optimizations.
Shrink the IRQ stubs down to just over four bytes per (we fit seven
into a 32-byte chunk.) This shrinks the total icache consumption of
the IRQ stubs down to an even kilobyte, if all of them are in active
use.
The downside is that we end up with a double jump, which could have a
negative effect on some pipelines. The double jump is always inside
the same cacheline on any modern chips.
To get the most effect, cache-align the IRQ stubs.
This makes the 64-bit code match changes already done to the 32-bit
code, and should open up irqinit*.c for unification.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
Impact: quick start and stop of function tracer
This patch adds a way to disable the function tracer quickly without
the need to run kstop_machine. It adds a new variable called
function_trace_stop which will stop the calls to functions from mcount
when set. This is just an on/off switch and does not handle recursion
like preempt_disable().
It's main purpose is to help other tracers/debuggers start and stop tracing
fuctions without the need to call kstop_machine.
The config option HAVE_FUNCTION_TRACE_MCOUNT_TEST is added for archs
that implement the testing of the function_trace_stop in the mcount
arch dependent code. Otherwise, the test is done in the C code.
x86 is the only arch at the moment that supports this.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: improve debuginfo
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Due to confusion between the ftrace infrastructure and the gcc profiling
tracer "ftrace", this patch renames the config options from FTRACE to
FUNCTION_TRACER. The other two names that are offspring from FTRACE
DYNAMIC_FTRACE and FTRACE_MCOUNT_RECORD will stay the same.
This patch was generated mostly by script, and partially by hand.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
x86 now sets up the mcount locations through the build and no longer
needs to record the ip when the function is executed. This patch changes
the initial mcount to simply return. There's no need to do any other work.
If the ftrace start up test fails, the original mcount will be what everything
will use, so having this as fast as possible is a good thing.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Mark the exception handlers with "dotraplinkage" to hide the
calling convention differences between i386 and x86_64.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Add TRACE_IRQS_OFF just before entering the C code.
All exceptions are taken via interrupt gates. If irq tracing is
enabled, it should be notified as soon as possible. Interrupts
are only (conditionally) re-enabled in C code.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Add TRACE_IRQS_OFF just before entering the C code.
All exceptions are taken via interrupt gates. If irq tracing is
enabled, it should be notified as soon as possible. Interrupts
are only (conditionally) re-enabled in C code.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Save rbp twice: One is for marking the stack frame, as usual (already
there), and the other, to fill pt_regs properly. This is because bx
comes right before the last saved register in that structure, and not
bp. If the base pointer were in the place bx is today, this would not
be needed.
Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
The CFI_ADJUST_CFA_OFFSET dwarf2 annotation of a push/popf
pair in ret_from_fork wrongly used a value of 4. It should
have been 8. Fix that.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: heukelum@fastmail.fm
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
This adds fast paths for 32-bit syscall entry and exit when
TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing.
These paths does not need to save and restore all registers as
the general case of tracing does. Avoiding the iret return path
when syscall audit is enabled helps performance a lot.
Signed-off-by: Roland McGrath <roland@redhat.com>
|
|
This adds a fast path for 64-bit syscall entry and exit when
TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing.
This path does not need to save and restore all registers as
the general case of tracing does. Avoiding the iret return path
when syscall audit is enabled helps performance a lot.
Signed-off-by: Roland McGrath <roland@redhat.com>
|
|
This short-circuit path in sysret_signal looks wrong to me.
AFAICT, in practice the branch is never taken--and if it were,
it would go wrong. To wit, try loading a module whose init
function does set_thread_flag(TIF_IRET), and see insmod crash
(presumably with a wrong user stack pointer).
This is because the FIXUP_TOP_OF_STACK work hasn't been done yet
when we jump around the call to ptregscall_common and get to
int_with_check--where it expects the user RSP,SS,CS and EFLAGS to
have been stored by FIXUP_TOP_OF_STACK.
I don't think it's normally possible to get to sysret_signal with no
_TIF_DO_NOTIFY_MASK bits set anyway, so these two instructions are
already superfluous. If it ever did happen, it is harmless to call
do_notify_resume with nothing for it to do.
Signed-off-by: Roland McGrath <roland@redhat.com>
|
|
'x86/core', 'x86/cpu', 'x86/fixmap', 'x86/gart', 'x86/kprobes', 'x86/memtest', 'x86/modules', 'x86/nmi', 'x86/pat', 'x86/reboot', 'x86/setup', 'x86/step', 'x86/unify-pci', 'x86/uv', 'x86/xen' and 'xen-64bit' into x86/for-linus
|
|
This unifies and cleans up the syscall tracing code on i386 and x86_64.
Using a single function for entry and exit tracing on 32-bit made the
do_syscall_trace() into some terrible spaghetti. The logic is clear and
simple using separate syscall_trace_enter() and syscall_trace_leave()
functions as on 64-bit.
The unification adds PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP support
on x86_64, for 32-bit ptrace() callers and for 64-bit ptrace() callers
tracing either 32-bit or 64-bit tasks. It behaves just like 32-bit.
Changing syscall_trace_enter() to return the syscall number shortens
all the assembly paths, while adding the SYSEMU feature in a simple way.
Signed-off-by: Roland McGrath <roland@redhat.com>
|
|
Exceptions using paranoidentry need to have their exception frames
adjusted explicitly.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
Implement the failsafe callback, so that iret and segment register
load exceptions are reported to the kernel.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Conflicts:
arch/powerpc/Kconfig
arch/s390/kernel/time.c
arch/x86/kernel/apic_32.c
arch/x86/kernel/cpu/perfctr-watchdog.c
arch/x86/kernel/i8259_64.c
arch/x86/kernel/ldt.c
arch/x86/kernel/nmi_64.c
arch/x86/kernel/smpboot.c
arch/x86/xen/smp.c
include/asm-x86/hw_irq_32.h
include/asm-x86/hw_irq_64.h
include/asm-x86/mach-default/irq_vectors.h
include/asm-x86/mach-voyager/irq_vectors.h
include/asm-x86/smp.h
kernel/Makefile
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Conflicts:
arch/x86/kernel/entry_32.S
arch/x86/kernel/process_32.c
arch/x86/kernel/process_64.c
arch/x86/lib/Makefile
include/asm-x86/irqflags.h
kernel/Makefile
kernel/sched.c
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
On three of the several paths in entry_64.S that call
do_notify_resume() on the way back to user mode, we fail to properly
check again for newly-arrived work that requires another call to
do_notify_resume() before going to user mode. These paths set the
mask to check only _TIF_NEED_RESCHED, but this is wrong. The other
paths that lead to do_notify_resume() do this correctly already, and
entry_32.S does it correctly in all cases.
All paths back to user mode have to check all the _TIF_WORK_MASK
flags at the last possible stage, with interrupts disabled.
Otherwise, we miss any flags (TIF_SIGPENDING for example) that were
set any time after we entered do_notify_resume(). More work flags
can be set (or left set) synchronously inside do_notify_resume(), as
TIF_SIGPENDING can be, or asynchronously by interrupts or other CPUs
(which then send an asynchronous interrupt).
There are many different scenarios that could hit this bug, most of
them races. The simplest one to demonstrate does not require any
race: when one signal has done handler setup at the check before
returning from a syscall, and there is another signal pending that
should be handled. The second signal's handler should interrupt the
first signal handler before it actually starts (so the interrupted PC
is still at the handler's entry point). Instead, it runs away until
the next kernel entry (next syscall, tick, etc).
This test behaves correctly on 32-bit kernels, and fails on 64-bit
(either 32-bit or 64-bit test binary). With this fix, it works.
#define _GNU_SOURCE
#include <stdio.h>
#include <signal.h>
#include <string.h>
#include <sys/ucontext.h>
#ifndef REG_RIP
#define REG_RIP REG_EIP
#endif
static sig_atomic_t hit1, hit2;
static void
handler (int sig, siginfo_t *info, void *ctx)
{
ucontext_t *uc = ctx;
if ((void *) uc->uc_mcontext.gregs[REG_RIP] == &handler)
{
if (sig == SIGUSR1)
hit1 = 1;
else
hit2 = 1;
}
printf ("%s at %#lx\n", strsignal (sig),
uc->uc_mcontext.gregs[REG_RIP]);
}
int
main (void)
{
struct sigaction sa;
sigset_t set;
sigemptyset (&sa.sa_mask);
sa.sa_flags = SA_SIGINFO;
sa.sa_sigaction = &handler;
if (sigaction (SIGUSR1, &sa, NULL)
|| sigaction (SIGUSR2, &sa, NULL))
return 2;
sigemptyset (&set);
sigaddset (&set, SIGUSR1);
sigaddset (&set, SIGUSR2);
if (sigprocmask (SIG_BLOCK, &set, NULL))
return 3;
printf ("main at %p, handler at %p\n", &main, &handler);
raise (SIGUSR1);
raise (SIGUSR2);
if (sigprocmask (SIG_UNBLOCK, &set, NULL))
return 4;
if (hit1 + hit2 == 1)
{
puts ("PASS");
return 0;
}
puts ("FAIL");
return 1;
}
Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
This is for consistency with i386.
Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
