aboutsummaryrefslogtreecommitdiff
path: root/arch/sparc/kernel
AgeCommit message (Collapse)Author
2011-04-21sparc32,leon: implement genirq CPU affinityDaniel Hellstrom
A simple implementation of CPU affinity, the first CPU in the affinity CPU mask always takes the IRQ. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-21sparc32, leon: code cleanup of timer/IRQ controller initializationDaniel Hellstrom
Cleaned up leon_init_timers() by removing unnecessary double checking and one indentation level. Changed LEON_IMASK to LEON_IMASK(cpu). Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-21sparc32,leon: cleaned away code from the LEON2 daysDaniel Hellstrom
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-21sparc32,leon: per-cpu ticker use genirq per-cpu handlerDaniel Hellstrom
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-21sparc32,leon: add support for extended interrupt controllerDaniel Hellstrom
The extended IRQ controller gives the LEON 16 more IRQs. The patch installs a custom handler for the exetended controller IRQ, where a register is read and the "real" IRQ causing IRQ is determined. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-21sparc32, leon: must protect IRQ controller register with spinlockDaniel Hellstrom
The LEON interrupt controller has one single mask register for all IRQs per CPU, even though the genirq layer protects us from accessing the same IRQ at the same time other IRQs share the same mask register and may thus interfere. Some other IRQ controllers has a mask register or similar per IRQ instead which makes spinlocks unncessary. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19sparc32: genirq supportSam Ravnborg
The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19sparc32: cleanup code for pci initSam Ravnborg
Move the ifdeffery to a header file to make the logic more obvious where we decide between PCI or SBUS init Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19sparc32,sun4d: rename sbus_tid to board_to_cpu in irq supportSam Ravnborg
The new name reflects the actual usage much better. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-14sched: Provide scheduler_ipi() callback in response to smp_send_reschedule()Peter Zijlstra
For future rework of try_to_wake_up() we'd like to push part of that function onto the CPU the task is actually going to run on. In order to do so we need a generic callback from the existing scheduler IPI. This patch introduces such a generic callback: scheduler_ipi() and implements it as a NOP. BenH notes: PowerPC might use this IPI on offline CPUs under rare conditions! Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20110405152728.744338123@chello.nl
2011-04-07Merge branch 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6Linus Torvalds
* 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6: Fix common misspellings
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31sparc32: Pass task_struct to schedule_tail() in ret_from_forkTkhai Kirill
We have to pass task_struct of previous process to function schedule_tail(). Currently in ret_from_fork previous thread_info is passed: switch_to: mov %g6, %g3 /* previous thread_info in g6 */ ret_from_fork: call schedule_tail mov %g3, %o0 /* previous thread_info is passed */ void schedule_tail(struct task_struct *prev); Signed-off-by: Tkhai Kirill <tkhai@yandex.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-30sparc64: Fix section mis-match errors.David S. Miller
Fix all of the problems spotted by CONFIG_DEBUG_SECTION_MISMATCH under arch/sparc during a 64-bit defconfig build. They fall into two categorites: 1) of_device_id is marked as __initdata, and we can never do this since these objects sit in the device core data structures way past boot. So even if a driver will never be reloaded, we have to keep the device ID table around. Mark such cases const instead. 2) The bootmem alloc/free handling code in mdesc.c was not fully marked __init as it should be, thus generating a reference to free_bootmem_late() (which is __init) from non-__init code. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-29sparc: Hook up syncfs system call.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-29sparc: Use generic show_interrupts()Thomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: sparclinux@vger.kernel.org
2011-03-29sparc: Convert to new irq function namesThomas Gleixner
Scripted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: sparclinux@vger.kernel.org
2011-03-29sparc: Cleanup direct irq_desc accessThomas Gleixner
Use the proper wrapper functions. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: sparclinux@vger.kernel.org
2011-03-29sparc: Use the new genirq functionalityThomas Gleixner
Make use of the new features in genirq: 1) Set the chip flag IRCHIP_EOI_IF_HANDLED, which ensures in the core code that irq_eoi() is only called when the interrupt was handled. That removes the extra status check in the callback. 2) Use the preflow handler, which is called from the fasteoi core code before the device handler. That avoids another status check and the open coded handler redirection. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: sparclinux@vger.kernel.org
2011-03-24sparc32: Fix multiple RTC detections on SUN4DKjetil Oftedal
During the preparation for testing the recent changes made to the SUN4D specific code in the kernel by Sam Ravnborg the following was discovered: Since the removal of of_platform_bus_type (commit: eca3930163ba8884060ce9d9ff5ef0d9b7c7b00f ) multiboard SUN4Ds have not been able to boot. The kernel crashes due to a zero-pointer error encountered when registering multiple M48T59 RTCs (There is one on each board). A patch for the was previously submitted, but the problem was not a serious at that time, as it would only generate warnings. Now the kernel will crash and stop executing before the serial console has been started. (Crash output can be viewed by using the -p boot flag) Signed-off-by: Kjetil Oftedal <oftedal@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-24percpu: Always align percpu output section to PAGE_SIZETejun Heo
Percpu allocator honors alignment request upto PAGE_SIZE and both the percpu addresses in the percpu address space and the translated kernel addresses should be aligned accordingly. The calculation of the former depends on the alignment of percpu output section in the kernel image. The linker script macros PERCPU_VADDR() and PERCPU() are used to define this output section and the latter takes @align parameter. Several architectures are using @align smaller than PAGE_SIZE breaking percpu memory alignment. This patch removes @align parameter from PERCPU(), renames it to PERCPU_SECTION() and makes it always align to PAGE_SIZE. While at it, add PCPU_SETUP_BUG_ON() checks such that alignment problems are reliably detected and remove percpu alignment comment recently added in workqueue.c as the condition would trigger BUG way before reaching there. For um, this patch raises the alignment of percpu area. As the area is in .init, there shouldn't be any noticeable difference. This problem was discovered by David Howells while debugging boot failure on mn10300. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Mike Frysinger <vapier@gentoo.org> Cc: uclinux-dist-devel@blackfin.uclinux.org Cc: David Howells <dhowells@redhat.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: user-mode-linux-devel@lists.sourceforge.net
2011-03-18sparc: Add {open_by,name_to}_handle_at and clock_adjtime syscalls.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-18sparc: Implement of_iomap().David S. Miller
Grab the pre-computed resource and map using of_ioremap(). Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-18sparc: Implement of_address_to_resource().David S. Miller
Similarly to irq_of_parse_and_map(), find the platform_device object and return the pre-computed resource. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-16sparc: Fix .size directive for do_int_loadBen Hutchings
gas used to accept (and ignore?) .size directives which referred to undefined symbols, as this does. In binutils 2.21 these are treated as errors. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-16sparc64: Fix build errors with gcc-4.6.0David S. Miller
Most of the warnings emitted (we fail arch/sparc file builds with -Werror) were legitimate but harmless, however one case (n2_pcr_write) was a genuine bug. Based almost entirely upon a patch by Sam Ravnborg. Reported-by: Dennis Gilmore <dennis@ausil.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-16sparc32,sun4m: percpu and global register definitions moved to irq.hSam Ravnborg
entry.S access percpu + global data defined in sun4m_irq.c - so move the types to irq.h. This makes sparse happy and allow us to utilize asm-offsets later. Also updated a few comments in the sun4m_irq.c file. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-16sparc32: introduce build_device_irqSam Ravnborg
build_device_irq() is used to encapsulate the plaform specific details when we build an irq. For now the default is a simple 1:1 but sun4d differs. This patch refactors functionality - but does not change the existing functionality. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-16sparc32: introduce sparc_irq_configSam Ravnborg
sparc_irq_config is used to hold the platform specific irq setup. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-16sparc32: fix build with leon or floppy enabledSam Ravnborg
Add a few includes back required to build with floppy enabled Fix declaration of trapbase_cpu* so it is now consistent Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-16sparc: convert to clocksource_register_hz/khzJohn Stultz
This converts the sparc clocksources to use clocksource_register_hz/khz Signed-off-by: John Stultz <johnstul@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-16sparc64: Sharpen address space randomization calculations.David S. Miller
A recent patch to the x86 randomization code caused me to take a quick look at what we do on sparc64, and in doing so I noticed that we sometimes calculate a non-page-aligned randomization value and stick it into mmap_base. I also noticed that since I copied the logic over from PowerPC, the powerpc code has tweaked the randomization ranges in ways that would benefit us as well. For one thing, we should allow up to at least 8MB of randomization otherwise huge-page regions when HPAGE_SIZE is 4MB never randomize at all. And on the 64-bit side we were using up to 4GB. Tone it down to 1GB as 4GB can result in a lot of address space wastage. Finally, make sure all computations are unsigned. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-16sparc32: irq_32.c cleanupSam Ravnborg
- drop filename in file header - drop unused includes - add KERN_* to printk - fix spaces => tabs - add spaces after reserved words - drop all externs, they are now in header files Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-16sparc32, sun4d: add comment in empty statement in sun4d_request_irq()Sam Ravnborg
This looked like a bug to me. Add a comment so next reader is hopefully less confused. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-16sparc32,sun4d: drop unused code in sun4d_distribute_irqs()Sam Ravnborg
The preprocessor symbol was not defined and the code was therefore not in use. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-16sparc32,sun4d: irq, smp files cleanupSam Ravnborg
- drop filename in file header - drop unused includes - add description of sun4d interrupts (from davem) - add KERN_* to printk - fix spaces => tabs - add spaces after reserved words - fix indent of a whole code block in smp4d_boot_one_cpu() Note: two printk() was updated from debug to KERN_INFO in this code block - drop all externs, they are now in header files This is partly based on a patch from: David Miller <davem@davemloft.net> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-16sparc32,sun4m: irq, smp files cleanupSam Ravnborg
- drop filename in file header - drop unused includes - add description of sun4m interrupts (from davem) - add KERN_* to printk - fix spaces => tabs - add spaces after reserved words - drop all externs, they are now in header files This is partly based on a patch from: David Miller <davem@davemloft.net> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-16sparc32,sun4c: irq file cleanupSam Ravnborg
- drop filename in header - drop unused includes - add description of sun4c interrupts (from davem) - add spaces after reserved words This is partly based on a patch from: David Miller <davem@davemloft.net> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-16sparc32: add irq + smp declarations to headersSam Ravnborg
In preparation for cleaning up a number of files add declarations for irq and smp related data/functions to the relevant headers. This showed that the extern declaration of cputypval differed in the two files where it was used. As cputypval is defined like this: cputypval: .asciz "sun4c" the correct representation is a char array. Fix users to use the new declaration. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-16sparc32: remove tick14.cSam Ravnborg
The two methods included in tick14.c was nop because the static variable linux_lvl14 was always NULL. So remove the file and callers. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-16sparc32/leon: FPU-FSR only available when FPU presentDaniel Hellstrom
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-16SPARC/LEON: power down instruction different of different LEONsDaniel Hellstrom
The way a LEON is powered down is implemented differently depending on CHIP type. The AMBA Plug&Play system ID tells revision of GRLIB and CHIP. This is for example needed by the GR-LEON4-ITX board and the UT699. Previously the power down support for LEON was limited to SMP, now both SMP and UP systems use the instruction. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-16sparc64: rename virt_irq => irq - IISam Ravnborg
The generic irq support uses the term 'irq' for the allocated irq number. Fix it so sparc64 use the same term for an irq as the generic irq support does. For a naive reader this is less confusing. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-16sparc64: rename virt_irq => irq - ISam Ravnborg
The generic irq support uses the term 'irq' for the allocated irq number. Fix it so sparc64 use the same term for an irq as the generic irq support does. For a naive reader this is less confusing. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-16sparc64: use up-to-data genirq functionsSam Ravnborg
Drop all uses of deprecated genirq features. The irq_set_affinity() call got a third paramter 'force' which is unused. For now genirq does not use this paramter and it is ignored by sparc. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Josip Rodin <joy@entuzijast.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-16sparc64: use {get,set}_irq_data for handler_dataSam Ravnborg
{get,set}_irq_data uses the member "handler_data" in irq_data which fits the naem of the datatype. The change has no functional impact Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-16sparc64: all pointers to irq_handler_data renamed to handler_dataSam Ravnborg
In preparation of moving to use irq_data.handler_data rename all pointers to irq_handler_data "handler_data". This will also prevent name clash when we introduce the new irq methods. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-16sparc: in handler_irq() rename irq parameter to pilSam Ravnborg
The generic irq support uses "irq" to identify the virtual irq number. To avoid confusion rename the argument to handler_irq() to pil to match the name of the parameter in the PCR register. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-16sparc64: fix direct access to irq_descSam Ravnborg
GENERIC_HARDIRQS_NO_DEPRECATED require us to access data via irq_data. No functional changes as data has same layout due to use of union Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-16sparc: Fix sbus_alloc_coherent error handling.Kristoffer Glembo
Order of kfree and free_pages were swapped in the error handling. Signed-off-by: Kristoffer Glembo <kristoffer@gaisler.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2025-03-23 20:05:14 +0000