aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms
AgeCommit message (Collapse)Author
2006-06-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (43 commits) [POWERPC] Use little-endian bit from firmware ibm,pa-features property [POWERPC] Make sure smp_processor_id works very early in boot [POWERPC] U4 DART improvements [POWERPC] todc: add support for Time-Of-Day-Clock [POWERPC] Make lparcfg.c work when both iseries and pseries are selected [POWERPC] Fix idr locking in init_new_context [POWERPC] mpc7448hpc2 (taiga) board config file [POWERPC] Add tsi108 pci and platform device data register function [POWERPC] Add general support for mpc7448hpc2 (Taiga) platform [POWERPC] Correct the MAX_CONTEXT definition powerpc: minor cleanups for mpc86xx [POWERPC] Make sure we select CONFIG_NEW_LEDS if ADB_PMU_LED is set [POWERPC] Simplify the code defining the 64-bit CPU features [POWERPC] powerpc: kconfig warning fix [POWERPC] Consolidate some of kernel/misc*.S [POWERPC] Remove unused function call_with_mmu_off [POWERPC] update asm-powerpc/time.h [POWERPC] Clean up it_lp_queue.h [POWERPC] Skip the "copy down" of the kernel if it is already at zero. [POWERPC] Add the use of the firmware soft-reset-nmi to kdump. ...
2006-06-29Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: [PATCH] i386: export memory more than 4G through /proc/iomem [PATCH] 64bit Resource: finally enable 64bit resource sizes [PATCH] 64bit Resource: convert a few remaining drivers to use resource_size_t where needed [PATCH] 64bit resource: change pnp core to use resource_size_t [PATCH] 64bit resource: change pci core and arch code to use resource_size_t [PATCH] 64bit resource: change resource core to use resource_size_t [PATCH] 64bit resource: introduce resource_size_t for the start and end of struct resource [PATCH] 64bit resource: fix up printks for resources in misc drivers [PATCH] 64bit resource: fix up printks for resources in arch and core code [PATCH] 64bit resource: fix up printks for resources in pcmcia drivers [PATCH] 64bit resource: fix up printks for resources in video drivers [PATCH] 64bit resource: fix up printks for resources in ide drivers [PATCH] 64bit resource: fix up printks for resources in mtd drivers [PATCH] 64bit resource: fix up printks for resources in pci core and hotplug drivers [PATCH] 64bit resource: fix up printks for resources in networks drivers [PATCH] 64bit resource: fix up printks for resources in sound drivers [PATCH] 64bit resource: C99 changes for struct resource declarations Fixed up trivial conflict in drivers/ide/pci/cmd64x.c (the printk that was changed by the 64-bit resources had been deleted in the meantime ;)
2006-06-29[PATCH] genirq: cleanup: merge irq_affinity[] into irq_desc[]Ingo Molnar
Consolidation: remove the irq_affinity[NR_IRQS] array and move it into the irq_desc[NR_IRQS].affinity field. [akpm@osdl.org: sparc64 build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-29[PATCH] genirq: rename desc->handler to desc->chipIngo Molnar
This patch-queue improves the generic IRQ layer to be truly generic, by adding various abstractions and features to it, without impacting existing functionality. While the queue can be best described as "fix and improve everything in the generic IRQ layer that we could think of", and thus it consists of many smaller features and lots of cleanups, the one feature that stands out most is the new 'irq chip' abstraction. The irq-chip abstraction is about describing and coding and IRQ controller driver by mapping its raw hardware capabilities [and quirks, if needed] in a straightforward way, without having to think about "IRQ flow" (level/edge/etc.) type of details. This stands in contrast with the current 'irq-type' model of genirq architectures, which 'mixes' raw hardware capabilities with 'flow' details. The patchset supports both types of irq controller designs at once, and converts i386 and x86_64 to the new irq-chip design. As a bonus side-effect of the irq-chip approach, chained interrupt controllers (master/slave PIC constructs, etc.) are now supported by design as well. The end result of this patchset intends to be simpler architecture-level code and more consolidation between architectures. We reused many bits of code and many concepts from Russell King's ARM IRQ layer, the merging of which was one of the motivations for this patchset. This patch: rename desc->handler to desc->chip. Originally i did not want to do this, because it's a big patch. But having both "desc->handler", "desc->handle_irq" and "action->handler" caused a large degree of confusion and made the code appear alot less clean than it truly is. I have also attempted a dual approach as well by introducing a desc->chip alias - but that just wasnt robust enough and broke frequently. So lets get over with this quickly. The conversion was done automatically via scripts and converts all the code in the kernel. This renaming patch is the first one amongst the patches, so that the remaining patches can stay flexible and can be merged and split up without having some big monolithic patch act as a merge barrier. [akpm@osdl.org: build fix] [akpm@osdl.org: another build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-29[POWERPC] Make lparcfg.c work when both iseries and pseries are selectedStephen Rothwell
This also consolidates the initial bits of lparcfg_data() and adds the partition number to the iSeries flattened device tree. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-29[POWERPC] Add general support for mpc7448hpc2 (Taiga) platformZang Roy-r61911
Add support for Freescale mpc7448 (Taiga) board support Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28[PATCH] powermac backlight fixesMichael Hanselmann
Fix a erroneous calculation of the legacy brightness values as reported by Paul Collins. Additionally, it moves the calculation of the negative value in the radeonfb driver after the value check. Signed-off-by: Michael Hanselmann <linux-kernel@hansmi.ch> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Paul Collins <paul@briny.ondioline.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-28Merge branch 'for_paulus' of ↵Paul Mackerras
master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc
2006-06-28powerpc: minor cleanups for mpc86xxKumar Gala
* Remove duplicated cputable entry for 8641 (matches w/7448) * Removed __init from function prototypes in mpc86xx.h * Moved pci fixups into board specific code * Moved mpc86xx_exclude_device to generic mpc86xx pci code * Fixed sparse warnings in mpc86xx_smp.c * Removed board specific header include from asm-powerpc/mpc86xx.h Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2006-06-28[POWERPC] Clean up it_lp_queue.hStephen Rothwell
No more StudlyCaps. Remove from a couple of places it is no longer needed. Use C style comments. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28[POWERPC] spufs: fix class0 interrupt assignmentArnd Bergmann
The class zero interrupt handling for spus was confusing alignment and error interrupts, so swap them. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28[POWERPC] spufs: fix memory hotplug dependencyGeoff Levand
spufs_base.c calls __add_pages, which depends on CONFIG_MEMORY_HOTPLUG. Moved the selection of CONFIG_MEMORY_HOTPLUG from CONFIG_SPUFS_MMAP to CONFIG_SPU_FS. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28[POWERPC] spufs: fix MFC command queue purgeBenjamin Herrenschmidt
In the context save/restore code, the SPU MFC command queue purge code has a bug: static inline void wait_purge_complete(struct spu_state *csa, struct spu *spu) { struct spu_priv2 __iomem *priv2 = spu->priv2; /* Save, Step 28: * Poll MFC_CNTL[Ps] until value '11' is * read * (purge complete). */ POLL_WHILE_FALSE(in_be64(&priv2->mfc_control_RW) & MFC_CNTL_PURGE_DMA_COMPLETE); } This will exit as soon as _one_ of the 2 bits that compose MFC_CNTL_PURGE_DMA_COMPLETE is set, and one of them happens to be "purge in progress"... which means that we'll happily continue restoring the MFC while it's being purged at the same time. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28[POWERPC] spufs: map mmio space as guarded into user spaceBenjamin Herrenschmidt
This fixes a bug where we don't properly map SPE MMIO space as guarded, causing various test cases to fail, probably due to write combining and other niceties caused by the lack of the G bit. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28[POWERPC] Enable the RTAS udbg console on IBM Cell BladeMichael Ellerman
Enable the RTAS udbg console on IBM Cell Blade, this allows xmon to work. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28[POWERPC] powerpc: Initialise ppc_md htab pointers earlierMichael Ellerman
Initialise the ppc_md htab callbacks earlier, in the probe routines. This allows us to call htab_finish_init() from htab_initialize(), and makes it private to hash_utils_64.c. Move htab_finish_init() and make_bl() above htab_initialize() to avoid forward declarations. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28[POWERPC] Remove remaining iSeries debugger cruftMichael Ellerman
None of this seems to be necessary, so let's see if can remove it and not break anything. Booted on iSeries & pSeries here. NB. we don't remove the hvReleaseData, we just move it down so that the file reads more clearly. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28[POWERPC] kdump: Reserve the existing TCE mappings left by the first kernelHaren Myneni
During kdump boot, noticed some machines checkstop on dma protection fault for ongoing DMA left in the first kernel. Instead of initializing TCE entries in iommu_init() for the kdump boot, this patch fixes this issue by walking through the each TCE table and checks whether the entries are in use by the first kernel. If so, reserve those entries by setting the corresponding bit in tbl->it_map such that these entries will not be available for the kdump boot. However it could be possible that all TCE entries might be used up due to the driver bug that does continuous mapping. My observation is around 1700 TCE entries are used on some systems (Ex: P4) at some point of time during kdump boot and saving dump (either write into the disk or sending to remote machine). Hence, this patch will make sure that minimum of 2048 entries will be available such that kdump boot could be successful in some cases. Signed-off-by: Haren Myneni <haren@us.ibm.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28[POWERPC] Remove obsolete #include <linux/config.h>.Jon Loeliger
Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28[POWERPC] Remove redundant STD_MMU selection.Jon Loeliger
Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28[POWERPC] Move I8259 selection under MPC8641HPCN boardJon Loeliger
Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28[POWERPC] Remove redundant PPC_86XX check.Jon Loeliger
Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-27[PATCH] spin/rwlock init cleanupsIngo Molnar
locking init cleanups: - convert " = SPIN_LOCK_UNLOCKED" to spin_lock_init() or DEFINE_SPINLOCK() - convert rwlocks in a similar manner this patch was generated automatically. Motivation: - cleanliness - lockdep needs control of lock initialization, which the open-coded variants do not give - it's also useful for -rt and for lock debugging in general Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] 64bit resource: fix up printks for resources in arch and core codeGreg Kroah-Hartman
This is needed if we wish to change the size of the resource structures. Based on an original patch from Vivek Goyal <vgoyal@in.ibm.com> and Andrew Morton. (tweaked by Andy Isaacson <adi@hexapodia.org>) Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Andy Isaacson <adi@hexapodia.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26spelling fixesAndreas Mohr
acquired (aquired) contiguous (contigious) successful (succesful, succesfull) surprise (suprise) whether (weather) some other misspellings Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-25[PATCH] spufs: update ->flush method protoAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] Rewritten backlight infrastructure for portable Apple computersMichael Hanselmann
This patch contains a total rewrite of the backlight infrastructure for portable Apple computers. Backward compatibility is retained. A sysfs interface allows userland to control the brightness with more steps than before. Userland is allowed to upload a brightness curve for different monitors, similar to Mac OS X. [akpm@osdl.org: add needed exports] Signed-off-by: Michael Hanselmann <linux-kernel@hansmi.ch> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] remove for_each_cpu()Andrew Morton
Convert a few stragglers over to for_each_possible_cpu(), remove for_each_cpu(). Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] more for_each_cpu() removalAndrew Morton
It's going away. I wonder if this code really meant to iterate across not-present, not-online CPUs. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] VFS: Permit filesystem to override root dentry on mountDavid Howells
Extend the get_sb() filesystem operation to take an extra argument that permits the VFS to pass in the target vfsmount that defines the mountpoint. The filesystem is then required to manually set the superblock and root dentry pointers. For most filesystems, this should be done with simple_set_mnt() which will set the superblock pointer and then set the root dentry to the superblock's s_root (as per the old default behaviour). The get_sb() op now returns an integer as there's now no need to return the superblock pointer. This patch permits a superblock to be implicitly shared amongst several mount points, such as can be done with NFS to avoid potential inode aliasing. In such a case, simple_set_mnt() would not be called, and instead the mnt_root and mnt_sb would be set directly. The patch also makes the following changes: (*) the get_sb_*() convenience functions in the core kernel now take a vfsmount pointer argument and return an integer, so most filesystems have to change very little. (*) If one of the convenience function is not used, then get_sb() should normally call simple_set_mnt() to instantiate the vfsmount. This will always return 0, and so can be tail-called from get_sb(). (*) generic_shutdown_super() now calls shrink_dcache_sb() to clean up the dcache upon superblock destruction rather than shrink_dcache_anon(). This is required because the superblock may now have multiple trees that aren't actually bound to s_root, but that still need to be cleaned up. The currently called functions assume that the whole tree is rooted at s_root, and that anonymous dentries are not the roots of trees which results in dentries being left unculled. However, with the way NFS superblock sharing are currently set to be implemented, these assumptions are violated: the root of the filesystem is simply a dummy dentry and inode (the real inode for '/' may well be inaccessible), and all the vfsmounts are rooted on anonymous[*] dentries with child trees. [*] Anonymous until discovered from another tree. (*) The documentation has been adjusted, including the additional bit of changing ext2_* into foo_* in the documentation. [akpm@osdl.org: convert ipath_fs, do other stuff] Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Nathan Scott <nathans@sgi.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-21[POWERPC] Extra sanity check in EEH codeNathan Lynch
Don't dereference a device node that isn't there. A "shouldn't happen" case, but someone ran into it with a possibly misconfigured device tree. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-21[POWERPC] Dont look for class-code in pci childrenAnton Blanchard
Looking for class-code in PCI children breaks with direct slots. Lets just count all children. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-21[POWERPC] Unify ppc syscall tablesAndreas Schwab
Avoid duplication of the syscall table for the cell platform. Based on an idea from David Woodhouse. Signed-off-by: Andreas Schwab <schwab@suse.de> Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-21[POWERPC] pseries: Print PCI slot location code on failureLinas Vepstas
The PCI error recovery code will printk diagnostic info when a PCI error event occurs. Change the messages to include the slot location code, which is how most sysadmins will know the device. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-21[POWERPC] spufs: one more fix for 64k pagesarnd@arndb.de
The SPU context save/restore code is currently built for a 4k page size and we provide a _shipped version of it since most people don't have the spu toolchain that is needed to rebuild that code. This patch hardcodes the data structures to a 64k page alignment, which also guarantees 4k alignment but unfortunately wastes 60k of memory per SPU context that is created in the running system. We will follow up on this with another patch to reduce that overhead or maybe redo the context save/restore logic to do this part entirely different, but for now it should make experimental systems work with either page size. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-21[POWERPC] spufs: fail spu_create with invalid flagsarnd@arndb.de
At this time, all flags are invalid. Since we are planning to actually add valid flags in the future, we better check if any were passed by the user. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-21[POWERPC] spufs: clear class2 interrupt status before wakeupMasato Noguchi
SPU interrupt status must be cleared before handle it. Otherwise, kernel may drop some interrupt packet. Currently, class2 interrupt treated like: 1) call callback to wake up waiting process 2) mask raised mailbox interrupt 3) clear interrupt status I changed like: 1) mask raised mailbox interrupt 2) clear interrupt status 3) call callback to wake up waiting process Clearing status before masking will make spurious interrupt. Thus, it is necessary to hold by steps I described above, I think. Signed-off-by: Masato Noguchi <Masato.Noguchi@jp.sony.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-21[POWERPC] spufs: fix Makefile for "make clean"Masato Noguchi
added spu_{save,restore}_dump.h to target of 'make clean' Signed-off-by: Masato Noguchi <Masato.Noguchi@jp.sony.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-21[POWERPC] spufs: remove stop_code from struct spuMasato Noguchi
This patch remove 'stop_code' -- discarded member of struct spu. It is written at initialize and interrupt, but never read in current implementation. Signed-off-by: Masato Noguchi <Masato.Noguchi@jp.sony.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-21[POWERPC] spufs: fix spu irq affinity settingGeoff Levand
This changes the hypervisor abstraction of setting cpu affinity to a higher level to avoid platform dependent interrupt controller routines. I replaced spu_priv1_ops:spu_int_route_set() with a new routine spu_priv1_ops:spu_cpu_affinity_set(). As a by-product, this change eliminated what looked like an existing bug in the set affinity code where spu_int_route_set() mistakenly called int_stat_get(). Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-21[POWERPC] spufs: further abstract priv1 register accessGeoff Levand
To support muti-platform binaries the spu hypervisor accessor routines must have runtime binding. I removed the existing statically linked routines in spu.h and spu_priv1_mmio.c and created new accessor routines in spu_priv1.h that operate indirectly through an ops struct spu_priv1_ops. spu_priv1_mmio.c contains the instance of the accessor routines for running on raw hardware. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-21[POWERPC] spufs: split the Cell BE support into generic and platform ↵Geoff Levand
dependant parts Creates new config variables PPC_CELL_NATIVE and PPC_IBM_CELL_BLADE. The existing CONFIG_PPC_CELL is now used to denote the generic Cell processor support. PPC_CELL = make descends into platforms/cell PPC_CELL_NATIVE = add bare metal support PPC_IBM_CELL_BLADE = add blade device drivers, etc. Also renames spu_priv1.c to spu_priv1_mmio.c. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-21[POWERPC] spufs: dont try to access SPE channel 1 countarnd@arndb.de
The save/restore sequence for SPE contexts currently attempts to save and restore the channel count for SPE channel 1 (the SPU_WriteEventMask channel. But the CBE architecture (section 9.11.2) clearly states that this channel does not have an associated count. Hardware simply ignores the attempt to write this count, but the simulator generates a warning message. WARNING: 279721590: SPE7: Attempt to write channel count for CH 1 with no associated count is ignored. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-21[POWERPC] spufs: use kzalloc in create_spuJeremy Kerr
Clean up create_spu() a little by using kzalloc instead of kmalloc + assignments. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-21[POWERPC] spufs: fix initial state of wbox filearnd@arndb.de
The wbox channel count of an spu is now initialized to four for the saved context. This makes it possible to write to the mailbox right away without waiting for the SPE to become scheduled first. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-21[POWERPC] spufs: add a phys-id attribute to each SPU contextarnd@arndb.de
For performance analysis, it is often interesting to know which physical SPE a thread is currently running on, and, more importantly, if it is running at all. This patch adds a simple attribute to each SPU directory with that information. The attribute is read-only and called 'phys-id'. It contains an ascii string with the number of the physical SPU (e.g. "0x5"), or alternatively the string "0xffffffff" (32 bit -1) when it is not running at all at the time that the file is read. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-21[POWERPC] spufs: set up correct SLB entries for 64k pagesarnd@arndb.de
spufs currently knows only 4k pages and 16M hugetlb pages. Make it use the regular methods for deciding on the SLB bits. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-21[POWERPC] spufs: fix deadlock in spu_create error pathMichael Ellerman
spufs_rmdir tries to acquire the spufs root i_mutex, which is already held by spufs_create_thread. This was tracked as Bug #H9512. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-21[POWERPC] spufs: restore mapping of mssync registerarnd@arndb.de
A recent change to the way that the mfc file gets mapped made it impossible to map the SPE Multi-Source Synchronization register into user space, but that may be needed by some applications. This restores the missing functionality. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-21[POWERPC] cell: always build spu base into the kernelarnd@arndb.de
The spu_base module is rather deeply intermixed with the core kernel, so it makes sense to have that built-in. This will let us extend the base in the future without having to export more core symbols just for it. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>