aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/oprofile/op_model_cell.c
AgeCommit message (Collapse)Author
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2010-11-01tree-wide: fix comment/printk typosUwe Kleine-König
"gadget", "through", "command", "maintain", "maintain", "controller", "address", "between", "initiali[zs]e", "instead", "function", "select", "already", "equal", "access", "management", "hierarchy", "registration", "interest", "relative", "memory", "offset", "already", Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-06-07powerpc/oprofile: fix potential buffer overrun in op_model_cell.cDenis Kirjanov
Fix potential initial_lfsr buffer overrun. Writing past the end of the buffer could happen when index == ENTRIES Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Cc: stable@kernel.org Signed-off-by: Robert Richter <robert.richter@amd.com>
2009-12-04tree-wide: fix assorted typos all over the placeAndré Goddard Rosa
That is "success", "unknown", "through", "performance", "[re|un]mapping" , "access", "default", "reasonable", "[con]currently", "temperature" , "channel", "[un]used", "application", "example","hierarchy", "therefore" , "[over|under]flow", "contiguous", "threshold", "enough" and others. Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-11-09tree-wide: fix a very frequent spelling mistakeDirk Hohndel
something-bility is spelled as something-blity so a grep for 'blit' would find these lines this is so trivial that I didn't split it by subsystem / copy additional maintainers - all changes are to comments The only purpose is to get fewer false positives when grepping around the kernel sources. Signed-off-by: Dirk Hohndel <hohndel@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-08powerpc/oprofile: fix whitespaces in op_model_cell.cRobert Richter
Signed-off-by: Robert Richter <robert.richter@amd.com>
2009-01-08powerpc/oprofile: IBM CELL: add SPU event profiling supportCarl Love
This patch adds the SPU event based profiling funcitonality for the IBM Cell processor. Previously, the CELL OProfile kernel code supported PPU event, PPU cycle profiling and SPU cycle profiling. The addition of SPU event profiling allows the users to identify where in their SPU code various SPU evnets are occuring. This should help users further identify issues with their code. Note, SPU profiling has some limitations due to HW constraints. Only one event at a time can be used for profiling and SPU event profiling must be time sliced across all of the SPUs in a node. The patch adds a new arch specific file to the OProfile file system. The file has bit 0 set to indicate that the kernel supports SPU event profiling. The user tool must check this file/bit to make sure the kernel supports SPU event profiling before trying to do SPU event profiling. The user tool check is part of the user tool patch for SPU event profiling. Signed-off-by: Carl Love <carll@us.ibm.com> Signed-off-by: Robert Richter <robert.richter@amd.com>
2009-01-08powerpc/oprofile: IBM CELL: cleanup and restructuringCarl Love
This patch restructures and cleans up the code a bit to make it easier to add new functionality later. The patch makes no functional changes to the existing code. Signed-off-by: Carl Love <carll@us.ibm.com> Signed-off-by: Robert Richter <robert.richter@amd.com>
2008-10-31powerpc/cell/OProfile: Fix on-stack array size in activate spu profiling ↵Carl Love
function The size of the pm_signal_local array should be equal to the number of SPUs being configured in the array. Currently, the array is of size 4 (NR_PHYS_CTRS) but being indexed by a for loop from 0 to 7 (NUM_SPUS_PER_NODE). This could potentially cause an oops or random memory corruption since the pm_signal_local array is on the stack. This fixes it. Signed-off-by: Carl Love <carll@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-15oprofile: more whitespace fixesRobert Richter
Signed-off-by: Robert Richter <robert.richter@amd.com>
2008-04-01[POWERPC] Replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-03[POWERPC] OProfile: enable callgraph support for CellBob Nelson
This patch enables OProfile callgraph support for the Cell processor. The original code was just calling a function to add the PC value, now it will call a function that first checks the callgraph depth. Callgraph is already enabled on the other Power platforms. Signed-off-by: Bob Nelson <rrnelson@us.ibm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2007-12-19[POWERPC] OProfile: fix cbe pm signal routing problemBob Nelson
Fix debug_bus_control and group_control PMU register values set up in set_pm_event(). Initialize variables before calling set_pm_event(). Delete unused static array and code that initialized it. Rename constant to better reflect usage. Signed-off-by: Bob Nelson <rrnelson@us.ibm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2007-10-09[POWERPC] cell: Move cbe_regs.h to include/asm-powerpc/cell-regs.hBenjamin Herrenschmidt
The new Cell EDAC driver needs that file, oprofile also does ugly path tricks to get to it, it's time to move it to asm-powerpc. While at it, rename it to be consistent with cell-pmu.h (and dashes look nicer than underscores anyway). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-20[CELL] oprofile: add support to OProfile for profiling CELL BE SPUsBob Nelson
From: Maynard Johnson <mpjohn@us.ibm.com> This patch updates the existing arch/powerpc/oprofile/op_model_cell.c to add in the SPU profiling capabilities. In addition, a 'cell' subdirectory was added to arch/powerpc/oprofile to hold Cell-specific SPU profiling code. Exports spu_set_profile_private_kref and spu_get_profile_private_kref which are used by OProfile to store private profile information in spufs data structures. Also incorporated several fixes from other patches (rrn). Check pointer returned from kzalloc. Eliminated unnecessary cast. Better error handling and cleanup in the related area. 64-bit unsigned long parameter was being demoted to 32-bit unsigned int and eventually promoted back to unsigned long. Signed-off-by: Carl Love <carll@us.ibm.com> Signed-off-by: Maynard Johnson <mpjohn@us.ibm.com> Signed-off-by: Bob Nelson <rrnelson@us.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org>
2007-05-09Fix misspellings collected by members of KJ list.Robert P. J. Day
Fix the misspellings of "propogate", "writting" and (oh, the shame :-) "kenrel" in the source tree. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-04-30[POWERPC] Spinlock initializer cleanupThomas Gleixner
Use DEFINE_SPINLOCK instead of initializing spinlocks to SPIN_LOCK_UNLOCKED, since DEFINE_SPINLOCK is better for lockdep. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-23[POWERPC] cell: add cbe_node_to_cpu functionChristian Krafft
This patch adds code to deal with conversion of logical cpu to cbe nodes. It removes code that assummed there were two logical CPUs per CBE. Signed-off-by: Christian Krafft <krafft@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-02-13[POWERPC] cell: pm_rtas_activat_signals routine cleanupMaynard Johnson
The code was setting up the debug bus for group 21 when profiling on the event PPU CYCLES. The debug bus is not actually used by the hardware performance counters when counting PPU CYCLES. Setting up the debug bus for PPU CYCLES causes signal routing conflicts on the debug bus when profiling PPU cycles and another PPU event. This patch fixes the code to only setup the debug bus to route the performance signals for the non PPU CYCLE events. Signed-off-by: Maynard Johnson <mpjohn@us.ibm.com> Signed-off-by: Carl Love <carll@us.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-02-13[POWERPC] cell: PPU Oprofile cleanup patchCarl Love
This is a clean up patch that includes the following changes: -Some comments were added to clarify the code based on feedback from the community. -The write_pm_cntrl() and set_count_mode() were passed a structure element from a global variable. The argument was removed so the functions now just operate on the global directly. -The set_pm_event() function call in the cell_virtual_cntr() routine was moved to a for-loop before the for_each_cpu loop Signed-off-by: Carl Love <carll@us.ibm.com> Signed-off-by: Maynard Johnson <mpjohn@us.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-12-04[POWERPC] cell: Add oprofile supportMaynard Johnson
Add PPU event-based and cycle-based profiling support to Oprofile for Cell. Oprofile is expected to collect data on all CPUs simultaneously. However, there is one set of performance counters per node. There are two hardware threads or virtual CPUs on each node. Hence, OProfile must multiplex in time the performance counter collection on the two virtual CPUs. The multiplexing of the performance counters is done by a virtual counter routine. Initially, the counters are configured to collect data on the even CPUs in the system, one CPU per node. In order to capture the PC for the virtual CPU when the performance counter interrupt occurs (the specified number of events between samples has occurred), the even processors are configured to handle the performance counter interrupts for their node. The virtual counter routine is called via a kernel timer after the virtual sample time. The routine stops the counters, saves the current counts, loads the last counts for the other virtual CPU on the node, sets interrupts to be handled by the other virtual CPU and restarts the counters, the virtual timer routine is scheduled to run again. The virtual sample time is kept relatively small to make sure sampling occurs on both CPUs on the node with a relatively small granularity. Whenever the counters overflow, the performance counter interrupt is called to collect the PC for the CPU where data is being collected. The oprofile driver relies on a firmware RTAS call to setup the debug bus to route the desired signals to the performance counter hardware to be counted. The RTAS call must set the routing registers appropriately in each of the islands to pass the signals down the debug bus as well as routing the signals from a particular island onto the bus. There is a second firmware RTAS call to reset the debug bus to the non pass thru state when the counters are not in use. Signed-off-by: Carl Love <carll@us.ibm.com> Signed-off-by: Maynard Johnson <mpjohn@us.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>