aboutsummaryrefslogtreecommitdiff
path: root/arch/mips/alchemy/devboards
AgeCommit message (Collapse)Author
2011-12-08MIPS: Alchemy: db1200: Improve PB1200 detection.Manuel Lauss
The PB1200 has the CPLD located at an address which on the DB1200 is RAM; reading the Board-ID sometimes results in a PB1200 being detected instead (especially during reboots after long uptimes). On the other hand, the address of the DB1200's CPLD is hosting Flash chips on the PB1200. Test for the DB1200 first and additionally do a quick write-test to the hexleds register to make sure we're writing to the CPLD. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3005/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-08MIPS: Alchemy: Touchscreen support on DB1100Manuel Lauss
Wire up the ADS7846 touchscreen controller on the DB1100. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2879/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-08MIPS: Alchemy: Hook up IrDA on DB1000/DB1100Manuel Lauss
Add necessary transceiver control platform data and hook up the IrDA peripheral on the DB1000 and DB1100 boards. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2878/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-08MTD: nand: make au1550nd.c a platform_driverManuel Lauss
Transform the au1550nd.c driver into a platform_driver and hook it up in the PB1550 board (gen_nand works fine on the DB1550, but since I don't have a PB1550 to test this driver stays for now). Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Cc: linux-mtd@lists.infradead.org To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2875/ Patchwork: https://patchwork.linux-mips.org/patch/3160/ Acked-by: Artem Bityutskiy <dedekind1@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Alchemy: Add RTC device to all devboardsManuel Lauss
All Devboards can use the 32kHz counter as a RTC device. Also delete the custom CMOS RTC header, which can be used for the DS1693 on the PB1500. But since it doesn't have a buffer battery it is as useful as the on-chip RTC which I prefer. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2874/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Alchemy: MMC for DB1100Manuel Lauss
This patch hooks up the 2 MMC sockets on the DB1100 board. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2873/ Patchwork: https://patchwork.linux-mips.org/patch/2920/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Alchemy: one kernel for DB1000/DB1500/DB1100Manuel Lauss
These 3 boards are very similar; with this patch a single kernel image which runs on all three can be built. Tested on DB1500 and DB1100. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2872/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Alchemy: Merge PB1200 support into DB1200 code.Manuel Lauss
The PB1200 is basically a DB1200 with additional MMC and camera sockets and different base addresses for external hardware (CPLD, IDE, Net, NAND). This patch implements the missing PB1200 features in DB1200 support code and runtime board detection. Tested on DB1200 only. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2880/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Alchemy: move au1200fb global functions to platform dataManuel Lauss
au1200fb calls 3 functions which have to be defined in board code. Fix this ugliness with the introduction of platform_data. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Cc: linux-fbdev@vger.kernel.org To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2871/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Alchemy: merge devboard code into single per-board files.Manuel Lauss
Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2884/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Alchemy: Improved DB1550 support, with audio and serial busses.Manuel Lauss
Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2868/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Alchemy: Basic support for the DB1300 board.Manuel Lauss
Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2867/ Patchwork: https://patchwork.linux-mips.org/patch/2919/ Patchwork: https://patchwork.linux-mips.org/patch/2928/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Alchemy: devboards: remove unneeded BCSR IRQ reg accManuel Lauss
Initially I had to write to both the MASK and ENABLE registers, otherwise the CPLD would generate tons of spurious interrupts. With the change to the demux handler to disable the muxed line, it is now sufficient to disable the interrupt by writing either the enable or mask register. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2865/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Alchemy: Drop MIRAGE/BOSPORUS board supportManuel Lauss
No test hardware and no (apparent) users. These boards seem very similar to the DB1500, so if required support can be brought back again (I have datasheets) but then with dedicated board code, not tacked on to DB1000 support. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2864/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Alchemy: remove PB1000 supportManuel Lauss
Noone seems to have test hardware or care anymore. Drop PB1000 support and along with it the old Alchemy PCMCIA socket driver. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Cc: netdev@vger.kernel.org Cc: linux-pcmcia@lists.infradead.org Patchwork: https://patchwork.linux-mips.org/patch/2881/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-03Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (37 commits) MIPS: O32: Provide definition of registers ta0 .. ta3. MIPS: perf: Add Octeon support for hardware perf. MIPS: perf: Add support for 64-bit perf counters. MIPS: perf: Reorganize contents of perf support files. MIPS: perf: Cleanup formatting in arch/mips/kernel/perf_event.c MIPS: Add accessor macros for 64-bit performance counter registers. MIPS: Add probes for more Octeon II CPUs. MIPS: Add more CPU identifiers for Octeon II CPUs. MIPS: XLR, XLS: Add comment for smp setup MIPS: JZ4740: GPIO: Check correct IRQ in demux handler MIPS: JZ4740: GPIO: Simplify IRQ demuxer MIPS: JZ4740: Use generic irq chip MIPS: Alchemy: remove all CONFIG_SOC_AU1??? defines MIPS: Alchemy: kill au1xxx.h header MIPS: Alchemy: clean DMA code of CONFIG_SOC_AU1??? defines MIPS, IDE: Alchem, au1xxx-ide: Remove pb1200/db1200 header dep MIPS: Alchemy: Redo PCI as platform driver MIPS: Alchemy: more base address cleanup MIPS: Alchemy: rewrite USB platform setup. MIPS: Alchemy: abstract USB block control register access ... Fix up trivial conflicts in: arch/mips/alchemy/devboards/db1x00/platform.c drivers/ide/Kconfig drivers/mmc/host/au1xmmc.c drivers/video/Kconfig sound/mips/Kconfig
2011-10-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (549 commits) ALSA: hda - Fix ADC input-amp handling for Cx20549 codec ALSA: hda - Keep EAPD turned on for old Conexant chips ALSA: hda/realtek - Fix missing volume controls with ALC260 ASoC: wm8940: Properly set codec->dapm.bias_level ALSA: hda - Fix pin-config for ASUS W90V ALSA: hda - Fix surround/CLFE headphone and speaker pins order ALSA: hda - Fix typo ALSA: Update the sound git tree URL ALSA: HDA: Add new revision for ALC662 ASoC: max98095: Convert codec->hw_write to snd_soc_write ASoC: keep pointer to resource so it can be freed ASoC: sgtl5000: Fix wrong mask in some snd_soc_update_bits calls ASoC: wm8996: Fix wrong mask for setting WM8996_AIF_CLOCKING_2 ASoC: da7210: Add support for line out and DAC ASoC: da7210: Add support for DAPM ALSA: hda/realtek - Fix DAC assignments of multiple speakers ASoC: Use SGTL5000_LINREG_VDDD_MASK instead of hardcoded mask value ASoC: Set sgtl5000->ldo in ldo_regulator_register ASoC: wm8996: Use SND_SOC_DAPM_AIF_OUT for AIF2 Capture ASoC: wm8994: Use SND_SOC_DAPM_AIF_OUT for AIF3 Capture ...
2011-10-24MIPS: Alchemy: remove all CONFIG_SOC_AU1??? definesManuel Lauss
Now that no driver any longer depends on the CONFIG_SOC_AU1??? symbols, it's time to get rid of them: Move some of the platform devices to the boards which can use them, Rename a few (unused) constants in the header, Replace them with MIPS_ALCHEMY in the various Kconfig files. Finally delete them altogether from the Alchemy Kconfig file. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2707/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: Alchemy: kill au1xxx.h headerManuel Lauss
No longer required Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2705/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> delete mode 100644 arch/mips/include/asm/mach-au1x00/au1xxx.h
2011-10-24MIPS: Alchemy: clean DMA code of CONFIG_SOC_AU1??? definesManuel Lauss
This patch gets rid of all CONFIG_SOC_AU1XXX defines in DMA/DBDMA-related code. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2704/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS, IDE: Alchem, au1xxx-ide: Remove pb1200/db1200 header depManuel Lauss
au1xxx-ide uses defines from the pb1200/db1200 headers: get DBDMA ID through platform resource information, hardcode register spacing. The only 2 users of this driver (and the only boards it can really work on realiably) use the same register layout. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Cc: linux-ide@vger.kernel.org To: Linux-MIPS <linux-mips@linux-mips.org> Cc: linux-ide@vger.kernel.org Acked-by: David S. Miller <davem@davemloft.net> Patchwork: https://patchwork.linux-mips.org/patch/2716/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: Alchemy: Redo PCI as platform driverManuel Lauss
- Rewrite Alchemy PCI support as a platform driver. - Fixup boards which have PCI. Run-tested on DB1500 and DB1550. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2706/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> delete mode 100644 arch/mips/alchemy/common/pci.c delete mode 100644 arch/mips/pci/fixup-au1000.c delete mode 100644 arch/mips/pci/ops-au1000.c create mode 100644 arch/mips/pci/pci-alchemy.c
2011-10-24MIPS: Alchemy: more base address cleanupManuel Lauss
remove all redundant peripheral base address defines, fix all affected boards and drivers. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2700/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-09-21MIPS: Alchemy: DB1200: Disable cascade IRQ in handlerManuel Lauss
Disable the cascade IRQ in the cascade handler. This is required to get the DB1300 working, and also gets rid of all spurious interrupts previously observed on the DB1200; so Config[OD] can be disabled again for better performance. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2708/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-07-27ASoC: au1x: update db1200 machine to the new way of thingsManuel Lauss
The use of the "soc-audio" platform device is no longer en vogue, update the code to the newer, simpler way of doing things. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-27ASoC: au1x: remove automatic DMA device registration from PSC driversManuel Lauss
The PSC audio drivers (psc-ac97/psc-i2s) register the DMA platform_device on their own. This is frowned upon, from now on board code must register a simple pcm dma platform device for each PSC with sound duties. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-27ASoC: Add a DB1x00 AC97 machine driverManuel Lauss
Add a machine driver suitable for the AC97 part on the DB1000/DB1500/DB1100 boards. Run-tested on DB1500. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-19MIPS: Alchemy: Clean up GPIO registers and accessorsManuel Lauss
remove au_readl/au_writel, remove the predefined GPIO1/2 KSEG1 register addresses and fix the fallout in all boards and drivers. This also fixes a bug in the mtx-1_wdt driver which was introduced by commit 6ea8115bb6f359df4f45152f2b40e1d4d1891392 ("Convert mtx1 wdt to be a platform device and use generic GPIO API") before this patch mtx-1_wdt only modified GPIO215, the patch then used the gpio resource information as bit index into the GPIO2 register but the conversion to the GPIO API didn't realize that. With this patch the drivers original behaviour is restored and GPIO15 is left alone. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Florian Fainelli <florian@openwrt.org> To: Linux-MIPS <linux-mips@linux-mips.org> Cc: linux-watchdog@vger.kernel.org Cc: Wim Van Sebroeck <wim@iguana.be> Patchwork: https://patchwork.linux-mips.org/patch/2381/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org
2011-05-19MIPS: Alchemy: Rewrite UART setup and constants.Manuel Lauss
Detect CPU type at runtime and setup uarts accordingly; also clean up the uart base address mess in the process as far as possible. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Cc: Florian Fainelli <florian@openwrt.org> Cc: Wolfgang Grandegger <wg@grandegger.com> Patchwork: https://patchwork.linux-mips.org/patch/2352/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org
2011-05-19MIPS: DB1200: Set Config[OD] for improved stability.Manuel Lauss
Setting Config[OD] gets rid of a _LOT_ of spurious CPLD interrupts, but also decreases overall performance a bit. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Cc: Florian Fainelli <florian@openwrt.org> Cc: Wolfgang Grandegger <wg@grandegger.com> Patchwork: https://patchwork.linux-mips.org/patch/2347/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10MIPS: Alchemy: Fix GCC 4.6.0 build error.Ralf Baechle
CC arch/mips/alchemy/devboards/db1x00/board_setup.o arch/mips/alchemy/devboards/db1x00/board_setup.c: In function 'board_setup': arch/mips/alchemy/devboards/db1x00/board_setup.c:130:6: error: variable 'pin_func' set but not used [-Werror=unused-but-set-variable] Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-29MIPS: Convert the irq functions to the new namesThomas Gleixner
Scripted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29MIPS: alchemy: Use proper irq accessorsThomas Gleixner
This really starts to be a sysiphean task. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-25MIPS: Alchemy: Convert to new irq chip functionsThomas Gleixner
Fix the deadlock in set_type() while at it: The code called set_irq_chip_and_handler_name() resp. set_irq_chip() from the set_type() callback. That only works on UP and lock debugging disabled. Otherwise it would dead lock on desc->lock. __irq_set_chip_handler_name_locked() avoids that. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2173/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-12-22Merge branch 'master' into for-nextJiri Kosina
Conflicts: MAINTAINERS arch/arm/mach-omap2/pm24xx.c drivers/scsi/bfa/bfa_fcpim.c Needed to update to apply fixes for which the old branch was too outdated.
2010-12-16MIPS: Alchemy: Add return value check for strict_strtoul()Yoichi Yuasa
arch/mips/alchemy/devboards/prom.c: In function 'prom_init': arch/mips/alchemy/devboards/prom.c:60: error: ignoring return value of 'strict_strtoul', declared with attribute warn_unused_result Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/1761/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-11-16suspend: constify platform_suspend_opsLionel Debroux
While at it, fix two checkpatch errors. Several non-const struct instances constified by this patch were added after the introduction of platform_suspend_ops in checkpatch.pl's list of "should be const" structs (79404849e90a41ea2109bd0e2f7c7164b0c4ce73). Patch against mainline. Inspired by hunks of the grsecurity patch, updated for newer kernels. Signed-off-by: Lionel Debroux <lionel_debroux@yahoo.fr> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (365 commits) ALSA: hda - Disable sticky PCM stream assignment for AD codecs ALSA: usb - Creative USB X-Fi volume knob support ALSA: ca0106: Use card specific dac id for mute controls. ALSA: ca0106: Allow different sound cards to use different SPI channel mappings. ALSA: ca0106: Create a nice spot for mapping channels to dacs. ALSA: ca0106: Move enabling of front dac out of hardcoded setup sequence. ALSA: ca0106: Pull out dac powering routine into separate function. ALSA: ca0106 - add Sound Blaster 5.1vx info. ASoC: tlv320dac33: Use usleep_range for delays ALSA: usb-audio: add Novation Launchpad support ALSA: hda - Add workarounds for CT-IBG controllers ALSA: hda - Fix wrong TLV mute bit for STAC/IDT codecs ASoC: tpa6130a2: Error handling for broken chip ASoC: max98088: Staticise m98088_eq_band ASoC: soc-core: Fix codec->name memory leak ALSA: hda - Apply ideapad quirk to Acer laptops with Cxt5066 ALSA: hda - Add some workarounds for Creative IBG ALSA: hda - Fix wrong SPDIF NID assignment for CA0110 ALSA: hda - Fix codec rename rules for ALC662-compatible codecs ALSA: hda - Add alc_init_jacks() call to other codecs ...
2010-10-07MIPS: Add missing #inclusions of <linux/irq.h>David Howells
Add missing #inclusions of <linux/irq.h> to a whole bunch of files that should really include it. Note that this can replace #inclusions of <asm/irq.h>. This is required for the patch to sort out irqflags handling function naming to compile on MIPS. The problem is that these files require access to things like setup_irq() - which isn't available by #including <linux/interrupt.h> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-31ASoC: fix au1x platformManuel Lauss
This patch fixes up the au1x audio platform after the multi-component merge: - compile fixes and updates to get DB1200 platform audio working again, - removal of global variables in AC97/I2S/DMA(PCM) modules. The AC97 part is limited to one instance only for now due to issues with getting at driver data in the soc_ac97_ops. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-05MIPS: Ritually kill stupid printk.Ralf Baechle
This belongs into userland. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: Move Alchemy Makefile parts to their own Platform file.Manuel Lauss
[Ralf: Remove a forgotten -Werror in Pb1200 Makefile.] Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Patchwork: https://patchwork.linux-mips.org/patch/1319/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: Alchemy: fix deprecated compile warningsFUJITA Tomonori
Replace deprecated DMA_32BIT_MASK with DMA_BIT_MASK. This is needed because the new style platform makefiles will enable -Werror. cc1: warnings being treated as errors arch/mips/alchemy/devboards/db1200/platform.c:219: error: 'DMA_nnBIT_MASK' is deprecated arch/mips/alchemy/devboards/db1200/platform.c:226: error: 'DMA_nnBIT_MASK' is deprecated arch/mips/alchemy/devboards/db1200/platform.c:388: error: 'DMA_nnBIT_MASK' is deprecated arch/mips/alchemy/devboards/db1200/platform.c:393: error: 'DMA_nnBIT_MASK' is deprecated Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> To: linux-mips@linux-mips.org Acked-by: Manuel Lauss <manuel.lauss@googlemail.com> Patchwork: https://patchwork.linux-mips.org/patch/1427/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: MTX1: Fix build.Ralf Baechle
CC arch/mips/alchemy/mtx-1/board_setup.o {standard input}: Assembler messages: {standard input}:263: Error: opcode not supported on this processor: mips1 (mips1) `sync' {standard input}:274: Error: opcode not supported on this processor: mips1 (mips1) `sync' {standard input}:296: Error: opcode not supported on this processor: mips1 (mips1) `sync' [...] Any .set mipsX statement other than .set mips0 at the end of inline assembler is a big fat bug. Introduced by 9482eabeca315c0276ffb50026b7482481b7097b (linux-mips.org) rsp. 32fd6901a6d8d19f94e4de6be4e4b552ab078620 (kernel.org). While at it, fix the same issue in arch/mips/alchemy/devboards/pb1000/board_setup.c arch/mips/alchemy/xxs1500/board_setup.c as well. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21MIPS: Alchemy: Fix up residual devboard poweroff/reboot code.Manuel Lauss
Clean out stray unused board_reset() calls in pb1x boards, the PB1000 is different from the rest and gets private methods. (Cleanup after 32fd6901a6d8d19f94e4de6be4e4b552ab078620) Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1085/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-30MIPS: DB1200: PCMCIA card detection must not be auto-enabled.Manuel Lauss
Same issues as SD card detection: One of both is always triggering and the handlers take care to shut it up and enable the other. To avoid messages about "unbalanced interrupt enable/disable" they must not be automatically enabled when initally requested. This was not an issue with the db1200_defconfig due to fortunate timings; on a build without network chip support the warnings appear. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1133/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12MIPS: Alchemy: DB1200: Remove custom wait implementationManuel Lauss
While playing with the out-of-tree MAE driver module, the system would panic after a while in the db1200 custom wait code after wakeup due to a clobbered k0 register being used as target address of a store op. Remove the custom wait implementation and revert back to the Alchemy- recommended implementation already set as default. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1092/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: Repair db1500/bosporus buildsManuel Lauss
A few hunks somehow ended up outside their #ifdef/endif blocks, leading to -Werror-induces build failures. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1003/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: use 36bit addresses for PCMCIA resources.Manuel Lauss
On Alchemy the PCMCIA area lies at the end of the chips 36bit system bus area. Currently, addresses at the far end of the 32bit area are assumed to belong to the PCMCIA area and fixed up to the real 36bit address before being passed to ioremap(). A previous commit enabled 64 bit physical size for the resource datatype on Alchemy and this allows to use the correct 36bit addresses when registering the PCMCIA sockets. This patch removes the 32-to-36bit address fixup and registers the Alchemy demo board pcmcia socket with the correct 36bit physical addresses. Tested on DB1200, with a CF card (ide-cs driver) and a 3c589 PCMCIA ethernet card. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Cc: Manuel Lauss <manuel.lauss@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/994/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: devboard PM needs to save CPLD registers.Manuel Lauss
Save/restore CPLD registers when doing suspend-to-ram; this fixes issues with harddisk and ethernet not working correctly when resuming on DB1200. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/986/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-26 16:03:05 +0000