aboutsummaryrefslogtreecommitdiff
path: root/arch/m68knommu/platform/68328
AgeCommit message (Collapse)Author
2010-10-22m68knommu: convert to using tracehook_report_syscall_*Greg Ungerer
Break up syscall_trace() into separate entry and exit routines that use tracehook_report_syscall_entry() and tracehook_report_syscall_exit(). Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-10-21m68knommu: stop using __do_IRQGreg Ungerer
The use of __do_IRQ is deprecated, so lets stop using it. Generally the interrupts on the supported processors here are level triggered, so this is strait forward to switch over to using the standard handle_level_irq flow handler. (Although some ColdFire parts support edge triggered GPIO line interrupts we have no support for them yet). Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-10-21m68knommu: rename PT_OFF_VECTOR to PT_OFF_FORMATVEC.Philippe De Muyter
In m68k/m68knommu assembly files, the same value is called sometimes PT_OFF_VECTOR, but more frequently PT_OFF_FORMATVEC. Standardize name to PT_OFF_FORMATVEC. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-10-21m68knommu: whitespace cleanup in 68328/entry.SPhilippe De Muyter
Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-10-21m68knommu: fix strace support for 68328/68360Philippe De Muyter
strace enabled is marked using the `flags' field of the `thread_info' struct. 68360 version of entry.S did test a wrong bit in a wrong structure (task_struct). 68328 version of entry.S did test the right bit in the right structure, but wrongly, because the `flags' field is 32 bit wide, while the used assembler insn (btst) only accesses a 8 bit byte in memory. Fix both using code already used in the coldfire version of entry.S Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-10-21arch/m68knommu: Removing dead RAM_{16,32}_MB config optionChristian Dietrich
CONFIG_RAM_{16,32}_MB doesn't exist in Kconfig, therefore removing all references to it from the source. Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-10-21arch/m68knommu: Removing dead RELOCATE config optionChristian Dietrich
CONFIG_RELOCATE doesn't exist in Kconfig, therefore removing all references to it from the source. Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-09-30m68knommu: fix rename of pt_regs offset defines breakageGreg Ungerer
Commit f159ee782990aacb5494738c98f13a2aa61dbb4a ("locking, m68k/asm-offsets: Rename pt_regs offset defines") breaks the m68knommu entry code that relies on these define names. Fix the files to match the new define names. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-09-16m68knommu: complete interrupt controller code for the 68328 CPU'sGreg Ungerer
Define the interrupt controller structures along with the interrupt controller code for the 68328 CPU family. This brings the interrupt setup and control into one place for this CPU family. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-04-21clocksource: pass clocksource to read() callbackMagnus Damm
Pass clocksource pointer to the read() callback for clocksources. This allows us to share the callback between multiple instances. [hugh@veritas.com: fix powerpc build of clocksource pass clocksource mods] [akpm@linux-foundation.org: cleanup] Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: John Stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-04m68knommu: remove duplicate hw_tick() codeGreg Ungerer
Remove duplicate hw_tick() function from 68328 timers code. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01m68knommu: switch 68328 timer to use GENERIC_TIMEGreg Ungerer
Switch the 68328 CPU timer code to using GENERIC_TIME. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-23m68knommu: cleanup 68328 timer codeGreg Ungerer
Use common function naming for 68328 timer functions to make them consistent with the various other hardware m68knommu timers. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-23m68knommu: cleanup 68328 init codeGreg Ungerer
Clean up 68328 timer support code. Removed header includes not needed. Remove use of old m68knommu timer function pointers. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26m68knommu: use setup_irq() in 68328 timer codeGreg Ungerer
Use setup_irq() instead of request_irq() to set up system timer in 68328 timer code. With the old m68knommu irq code this was safe, but it is not now within the generic irq framework. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19m68knommu: generic irq handlingGreg Ungerer
Change the m68knommu irq handling to use the generic irq framework. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-06[PATCH] m68knommu: use irq_handler_t and remove regs arg for 68328Greg Ungerer
Remove regs arg from bad interrupt handler. Use irq_handler_t type for handler arg of local request_irq(). Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-06[PATCH] m68knommu: use irq_handler_t for passing handler types in 68328 setupGreg Ungerer
Use irq_handler_t type for passing around timer interrupt routine in 368360 setup code. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-09[PATCH] m68knommu: use irq_handler_t for passing handler typesGreg Ungerer
Use irq_handler_t for passing clock handler routine around. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-10-04Remove all inclusions of <linux/config.h>Dave Jones
kbuild explicitly includes this at build time. Signed-off-by: Dave Jones <davej@redhat.com>
2006-10-03fix file specification in commentsUwe Zeisberger
Many files include the filename at the beginning, serveral used a wrong one. Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-28[PATCH] m68knommu: build support for 68328 romvec.SGreg Ungerer
Conditionaly compile the 68328 romvec code based on the ROM configuration being enabled. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-28[PATCH] m68knommu: remove romvec asm code from ints.cGreg Ungerer
Remove the inline 68328 romvec section asm code into its own file. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-28[PATCH] m68knommu: create romvec.S for 68328Greg Ungerer
Create the 68328 romvec section in its own assembler file. It can be compiled in when required. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] m68knommu: use Kconfig RAM config options in 68328 startup codeGreg Ungerer
Switch to using the new RAM Kconfig settings, instead of linker defined regions in ROM specific 68328 startup code. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26[PATCH] m68knommu: remove unused vars from generic 68328 start codeGreg Ungerer
Clean out unused variable definitions from 68328 start up code. Also use a more appropriate start address for the case of relocating the kernel code to RAM (from ROM/flash). Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26[PATCH] m68knommu: remove __ramvec from 68328/pilot start codeGreg Ungerer
__ramvec has been removed from the linker script. The vector base address is defined as a configurable option, use that. Remove its use from the 68328/pilot startup code. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12[PATCH] m68knommu: startup code for the Drangen Engine 68328 based boardGreg Ungerer
Specialized startup code for the 68328 based DragenEngine board. It doesn't easily fit into the common 68x328 startup code framework. It doesn't want any of the common hardware setup to be done here. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-08[PATCH] m68knommu: create common timer code for 68x328 processor varientsGreg Ungerer
Create common timer code for all 68x328 processor varients. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-08[PATCH] m68knommu: extract common timer code for 68328 processorGreg Ungerer
Rework the 68x328 configuration and setup code. All 68x328 varient share the same timer hardware, so extract that into its own file, instead of keeping copies in each processors setup code. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-02[PATCH] m68knommu: use THREAD_SIZE instead of hard coded sizeGreg Ungerer
Use the THREAD_SIZE define when manipulating the stack instead of hard coded values (for the 68328 and 68360 sub-architectures). Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2025-03-25 07:47:59 +0000