aboutsummaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2012-10-01Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM soc general cleanups from Olof Johansson: "This is a large branch that contains a handful of different cleanups: - Fixing up the I/O space remapping on PCI on ARM. This is a series from Rob Herring that restructures how all pci devices allocate I/O space, and it's part of the work to allow multiplatform kernels. - A number of cleanup series for OMAP, moving and removing some headers, sparse irq rework and in general preparation for multiplatform. - Final removal of all non-DT boards for Tegra, it is now device-tree-only! - Removal of a stale platform, nxp4008. It's an old mobile chipset that is no longer in use, and was very likely never really used with a mainline kernel. We have not been able to find anyone interested in keeping it around in the kernel. - Removal of the legacy dmaengine driver on tegra + A handful of other things that I haven't described above." Fix up some conflicts with the staging tree (and because nxp4008 was removed) * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (184 commits) ARM: OMAP2+: serial: Change MAX_HSUART_PORTS to 6 ARM: OMAP4: twl-common: Support for additional devices on i2c1 bus ARM: mmp: using for_each_set_bit to simplify the code ARM: tegra: harmony: fix ldo7 regulator-name ARM: OMAP2+: Make omap4-keypad.h local ARM: OMAP2+: Make l4_3xxx.h local ARM: OMAP2+: Make l4_2xxx.h local ARM: OMAP2+: Make l3_3xxx.h local ARM: OMAP2+: Make l3_2xxx.h local ARM: OMAP1: Move irda.h from plat to mach ARM: OMAP2+: Make hdq1w.h local ARM: OMAP2+: Make gpmc-smsc911x.h local ARM: OMAP2+: Make gpmc-smc91x.h local ARM: OMAP1: Move flash.h from plat to mach ARM: OMAP2+: Make debug-devices.h local ARM: OMAP1: Move board-voiceblue.h from plat to mach ARM: OMAP1: Move board-sx1.h from plat to mach ARM: OMAP2+: Make omap-wakeupgen.h local ARM: OMAP2+: Make omap-secure.h local ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local ...
2012-10-01Merge tag 'fixes-non-critical' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull non-critical ARM soc bug fixes from Olof Johansson: "These were submitted as bug fixes before v3.6 but not considered important enough to be included in it. Some of them cross over to cleanup territory as well, and aren't strictly bugfixes." * tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits) ARM: nomadik: remove NAND_NO_READRDY use ARM: pxa: fix return value check in pxa2xx_drv_pcmcia_probe() ARM: SAMSUNG: Add missing variable declaration in s3c64xx_spi1_set_platdata() ARM: S3C24XX: removes unnecessary semicolon ARM: S3C24xx: delete double assignment ARM: EXYNOS: fix address for EXYNOS4 MDMA1 ARM: EXYNOS: fixed SYSMMU setup definition to mate parameter name ARM: ep93xx: Move ts72xx.h out of include/mach ARM: ep93xx: use __iomem pointers for MMIO ARM: msm: Fix early debug uart mapping on some memory configs ARM: msm: io: Change the default static iomappings to be shared ARM: msm: io: Remove 7x30 iomap region from 7x00 ARM: msm: Remove call to missing FPGA init on 8660 ARM: OMAP4: wakeupgen: remove duplicate AUXCOREBOOT* read/write ARM: OMAP4: wakeupgen: Fix the typo in AUXCOREBOOT register save dma: tegra: make data used as *of_device_id.data const can: mpc5xxx_can: make data used as *of_device_id.data const macintosh/mediabay: make data used as *of_device_id.data const i2c/mpc: make data used as *of_device_id.data const mfd/da9052: make i2c_device_id array const ...
2012-10-01Merge tag 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: "New drivers for: MCP3221, ADT7410, MAX197 Chip support added to existing drivers: LM71, LM74, MAX1110, MAX1112, MAX1113, INA220, INA230, MCP3221 Cleanup: Use devm_ functions, fixed build warnings, removed deprecated sysfs attributes, code simplifications, dropped dependencies on EXPERIMENTAL" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (64 commits) hwmon: (mcp3021) Add MCP3221 support hwmon: (mcp3021) Prepare MCP3021 driver to support other chips hwmon: (w83791d) Drop unnecessary compare statements hwmon: (lm93) Drop unnecessary compare statement hwmon: (lm70) Simplify show_name function hwmon: (adcxx) Simplify show_name function hwmon: Drop dependencies on EXPERIMENTAL hwmon: (it87) Fix Kconfig for IT87 driver hwmon: (sht15) move header to linux/platform_data/ hwmon: (asus_atk0110) Remove useless kfree hwmon: (ina2xx) Add support for INA220 and INA230 hwmon: (ina2xx) Use structure array to distinguish chip types hwmon: (max1111) Add support for MAX1110, MAX1112, and MAX1113 hwmon: (lm70) Add support for LM71 and LM74 hwmon: (Documentation) Update feature-removal-schedule.txt hwmon: (w83793) Remove legacy chassis intrusion detection sysfs attributes hwmon: (w83792d) Remove legacy chassis intrusion detection attributes hwmon: (adm9240) Remove legacy chassis intrusion detection sysfs attribute hwmon: (lm70) Allow 4wire SPI bus with LM70 hwmon: (sht15) remove multiple driver registration ...
2012-10-01Merge tag 'usb-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds
Pull USB changes from Greg Kroah-Hartman: "Here is the big USB pull request for 3.7-rc1 There are lots of gadget driver changes (including copying a bunch of files into the drivers/staging/ccg/ directory so that the other gadget drivers can be fixed up properly without breaking that driver), and we remove the old obsolete ub.c driver from the tree. There are also the usual XHCI set of updates, and other various driver changes and updates. We also are trying hard to remove the old dbg() macro, but the final bits of that removal will be coming in through the networking tree before we can delete it for good. All of these patches have been in the linux-next tree. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fix up several annoying - but fairly mindless - conflicts due to the termios structure having moved into the tty device, and often clashing with dbg -> dev_dbg conversion. * tag 'usb-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (339 commits) USB: ezusb: move ezusb.c from drivers/usb/serial to drivers/usb/misc USB: uas: fix gcc warning USB: uas: fix locking USB: Fix race condition when removing host controllers USB: uas: add locking USB: uas: fix abort USB: uas: remove aborted field, replace with status bit. USB: uas: fix task management USB: uas: keep track of command urbs xhci: Intel Panther Point BEI quirk. powerpc/usb: remove checking PHY_CLK_VALID for UTMI PHY USB: ftdi_sio: add TIAO USB Multi-Protocol Adapter (TUMPA) support Revert "usb : Add sysfs files to control port power." USB: serial: remove vizzini driver usb: host: xhci: Fix Null pointer dereferencing with 71c731a for non-x86 systems Increase XHCI suspend timeout to 16ms USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq USB: sierra_ms: don't keep unused variable fsl/usb: Add support for USB controller version 2.4 USB: qcaux: add Pantech vendor class match ...
2012-10-01Merge tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds
Pull TTY changes from Greg Kroah-Hartman: "As we skipped the merge window for 3.6-rc1 for the tty tree, everything is now settled down and working properly, so we are ready for 3.7-rc1. Here's the patchset, it's big, but the large changes are removing a firmware file and adding a staging tty driver (it depended on the tty core changes, so it's going through this tree instead of the staging tree.) All of these patches have been in the linux-next tree for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fix up more-or-less trivial conflicts in - drivers/char/pcmcia/synclink_cs.c: tty NULL dereference fix vs tty_port_cts_enabled() helper function - drivers/staging/{Kconfig,Makefile}: add-add conflict (dgrp driver added close to other staging drivers) - drivers/staging/ipack/devices/ipoctal.c: "split ipoctal_channel from iopctal" vs "TTY: use tty_port_register_device" * tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (235 commits) tty/serial: Add kgdb_nmi driver tty/serial/amba-pl011: Quiesce interrupts in poll_get_char tty/serial/amba-pl011: Implement poll_init callback tty/serial/core: Introduce poll_init callback kdb: Turn KGDB_KDB=n stubs into static inlines kdb: Implement disable_nmi command kernel/debug: Mask KGDB NMI upon entry serial: pl011: handle corruption at high clock speeds serial: sccnxp: Make 'default' choice in switch last serial: sccnxp: Remove mask termios caps for SW flow control serial: sccnxp: Report actual baudrate back to core serial: samsung: Add poll_get_char & poll_put_char Powerpc 8xx CPM_UART setting MAXIDL register proportionaly to baud rate Powerpc 8xx CPM_UART maxidl should not depend on fifo size Powerpc 8xx CPM_UART too many interrupts Powerpc 8xx CPM_UART desynchronisation serial: set correct baud_base for EXSYS EX-41092 Dual 16950 serial: omap: fix the reciever line error case 8250: blacklist Winbond CIR port 8250_pnp: do pnp probe before legacy probe ...
2012-10-01Merge tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linuxLinus Torvalds
Pull clk framework update from Michael Turquette: "The common clk framework changes for 3.7 are dominated by ARM platform ports to the framework along with one MIPS port, one MFD port, one minor framework enhancement and one helper function for platforms expressing their clock data through device tree." * tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linux: clk: add of_clk_src_onecell_get() support clk: ux500: Define smp_twd clock for u8500 mfd: dbx500: Provide a more accurate smp_twd clock clk: ux500: Support for prmcu_rate clock clk: Provide option for clk_get_rate to issue hw for new rate clock: max77686: Add driver for Maxim 77686 32Khz crystal oscillator. ARM: ux500: Switch to use common clock framework clk: ux500: Clock definitions for u8500 clk: ux500: First version of clock definitions for ux500 clk: ux500: Adapt PRCMU and PRCC clocks for common clk clk: versatile: make config option boolean clk: add Loongson1B clock support arm: mmp: make all SOCs use common clock by default clk: mmp: add clock definition for mmp2 clk: mmp: add clock definition for pxa910 clk: mmp: add clock definition for pxa168 clk: mmp: add mmp specific clocks clk: convert ARM RealView to common clk clk: prima2: move from arch/arm/mach to drivers/clk ARM: PRIMA2: convert to common clk and finish full clk tree
2012-10-01Merge tag 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds
Pull PCI changes from Bjorn Helgaas: "Host bridge hotplug - Protect acpi_pci_drivers and acpi_pci_roots (Taku Izumi) - Clear host bridge resource info to avoid issue when releasing (Yinghai Lu) - Notify acpi_pci_drivers when hot-plugging host bridges (Jiang Liu) - Use standard list ops for acpi_pci_drivers (Jiang Liu) Device hotplug - Use pci_get_domain_bus_and_slot() to close hotplug races (Jiang Liu) - Remove fakephp driver (Bjorn Helgaas) - Fix VGA ref count in hotplug remove path (Yinghai Lu) - Allow acpiphp to handle PCIe ports without native hotplug (Jiang Liu) - Implement resume regardless of pciehp_force param (Oliver Neukum) - Make pci_fixup_irqs() work after init (Thierry Reding) Miscellaneous - Add pci_pcie_type(dev) and remove pci_dev.pcie_type (Yijing Wang) - Factor out PCI Express Capability accessors (Jiang Liu) - Add pcibios_window_alignment() so powerpc EEH can use generic resource assignment (Gavin Shan) - Make pci_error_handlers const (Stephen Hemminger) - Cleanup drivers/pci/remove.c (Bjorn Helgaas) - Improve Vendor-Specific Extended Capability support (Bjorn Helgaas) - Use standard list ops for bus->devices (Bjorn Helgaas) - Avoid kmalloc in pci_get_subsys() and pci_get_class() (Feng Tang) - Reassign invalid bus number ranges (Intel DP43BF workaround) (Yinghai Lu)" * tag 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (102 commits) PCI: acpiphp: Handle PCIe ports without native hotplug capability PCI/ACPI: Use acpi_driver_data() rather than searching acpi_pci_roots PCI/ACPI: Protect acpi_pci_roots list with mutex PCI/ACPI: Use acpi_pci_root info rather than looking it up again PCI/ACPI: Pass acpi_pci_root to acpi_pci_drivers' add/remove interface PCI/ACPI: Protect acpi_pci_drivers list with mutex PCI/ACPI: Notify acpi_pci_drivers when hot-plugging PCI root bridges PCI/ACPI: Use normal list for struct acpi_pci_driver PCI/ACPI: Use DEVICE_ACPI_HANDLE rather than searching acpi_pci_roots PCI: Fix default vga ref_count ia64/PCI: Clear host bridge aperture struct resource x86/PCI: Clear host bridge aperture struct resource PCI: Stop all children first, before removing all children Revert "PCI: Use hotplug-safe pci_get_domain_bus_and_slot()" PCI: Provide a default pcibios_update_irq() PCI: Discard __init annotations for pci_fixup_irqs() and related functions PCI: Use correct type when freeing bus resource list PCI: Check P2P bridge for invalid secondary/subordinate range PCI: Convert "new_id"/"remove_id" into generic pci_bus driver attributes xen-pcifront: Use hotplug-safe pci_get_domain_bus_and_slot() ...
2012-10-01Merge tag 'regulator-3.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: - Support for putting regulators into bypass mode where they simply switch their input to the output (mainly used for low power retention). - A new API for setting voltages based on a voltage plus tolerance rather than an explicit voltage range. - Lots of cleanups and API updates from Axel Lin. - New driver for MAX8907. * tag 'regulator-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (71 commits) regulator: arizona-ldo: Remove top voltage regulator: tps6586x: remove regulator-compatible from DT docs regulator: tps65217.txt: remove regulator-compatible from DT docs regulator: deprecate regulator-compatible DT property regulator: fan53555: remove vsel_max not used regulator: aat2870: Don't explicitly initialise the first field extcon: arizona: Use bypass mode for MICVDD regulator: wm831x-ldo: Add bypass support regulator: arizona-micsupp: Support get/set bypass regulator: arizona-ldo: Support get/set bypass regulator: core: Provide regmap get/set bypass operations regulator: core: Support bypass mode regulator: Fairchild fan53555 support regulator: twl: Remove another unused variable warning regulator: core: Try using the parent device for the default regmap regulator: core: Fast path non-deferred disables regulator: core: Report microvolts in sysfs even with only list_voltage() regulator: tps6586x: add support for SYS rail regulator: lp872x: remove unnecessary function regulator: lp872x: fix NULL pointer access problem ...
2012-09-29Merge tag 'ep93xx-fixes-for-3.7' of git://github.com/RyanMallon/linux-ep93xx ↵Olof Johansson
into next/fixes-non-critical From Ryan Mallon: * tag 'ep93xx-fixes-for-3.7' of git://github.com/RyanMallon/linux-ep93xx: ARM: ep93xx: Move ts72xx.h out of include/mach ARM: ep93xx: use __iomem pointers for MMIO ARM: ep93xx: Fix build error due to 'SZ_32M' undeclared
2012-09-29Merge tag 'omap-devel-board-late-v3-for-v3.7' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup From Tony Lindgren: These board and platform related patches have been posted quite a while ago but have somehow fallen though the cracks as most of the focus has been making things to work with device tree. As the first patch depends on sparse IRQ related removal of irqs.h and related header moves, these are based on omap-cleanup-local-headers-for-v3.7 tag. * tag 'omap-devel-board-late-v3-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: serial: Change MAX_HSUART_PORTS to 6 ARM: OMAP4: twl-common: Support for additional devices on i2c1 bus
2012-09-28ARM: nomadik: remove NAND_NO_READRDY useArnd Bergmann
The nhk8815 board files uses NAND_NO_READRDY in its platform data, but this macro is getting removed because it was not being used anywhere. Without this patch, building nhk8815_defconfig results in: arch/arm/mach-nomadik/board-nhk8815.c:118:6: error: 'NAND_NO_READRDY' undeclared here (not in a function) Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Alessandro Rubini <rubini@unipv.it> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-28Merge remote-tracking branches 'regulator/topic/core', ↵Mark Brown
'regulator/topic/bypass', 'regulator/topic/tol', 'regulator/topic/drivers' and 'regulator/topic/tps6586x' into regulator-next
2012-09-27Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull one more arm-soc bugfix from Olof Johansson: "Here's a bugfix for orion5x. Without this, PCI doesn't initialize properly because of too small coherent pool to cover the allocations needed. A similar fix has already been done on kirkwood." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: Orion5x: Fix too small coherent pool.
2012-09-27Merge branch 'fixes-for-3.6' of ↵Linus Torvalds
git://git.linaro.org/people/mszyprowski/linux-dma-mapping Pull ARM dma-mapping fix from Marek Szyprowski: "This patch fixes a potential memory leak in the ARM dma-mapping code." * 'fixes-for-3.6' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: ARM: dma-mapping: Fix potential memory leak in atomic_pool_init()
2012-09-26ARM: Orion5x: Fix too small coherent pool.Andrew Lunn
Some Orion5x devices allocate their coherent buffers from atomic context. Increase size of atomic coherent pool to make sure such the allocations won't fail during boot. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull more networking fixes from David Miller: 1) Eric Dumazet discovered and fixed what turned out to be a family of bugs. These functions were using pskb_may_pull() which might need to reallocate the linear SKB data buffer, but the callers were not expecting this possibility. The callers have cached pointers to the packet header areas, and would need to reload them if we were to continue using pskb_may_pull(). So they could end up reading garbage. It's easier to just change these RAW4/RAW6/MIP6 routines to use skb_header_pointer() instead of pskb_may_pull(), which won't modify the linear SKB data area. 2) Dave Jone's syscall spammer caught a case where a non-TCP socket can call down into the TCP keepalive code. The case basically involves creating a raw socket with sk_protocol == IPPROTO_TCP, then calling setsockopt(sock_fd, SO_KEEPALIVE, ...) Fixed by Eric Dumazet. 3) Bluetooth devices do not get configured properly while being powered on, resulting in always using legacy pairing instead of SSP. Fix from Andrzej Kaczmarek. 4) Bluetooth cancels delayed work erroneously, put stricter checks in place. From Andrei Emeltchenko. 5) Fix deadlock between cfg80211_mutex and reg_regdb_search_mutex in cfg80211, from Luis R. Rodriguez. 6) Fix interrupt double release in iwlwifi, from Emmanuel Grumbach. 7) Missing module license in bcm87xx driver, from Peter Huewe. 8) Team driver can lose port changed events when adding devices to a team, fix from Jiri Pirko. 9) Fix endless loop when trying ot unregister PPPOE device in zombie state, from Xiaodong Xu. 10) batman-adv layer needs to set MAC address of software device earlier, otherwise we call tt_local_add with it uninitialized. 11) Fix handling of KSZ8021 PHYs, it's matched currently by KS8051 but that doesn't program the device properly. From Marek Vasut. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: ipv6: mip6: fix mip6_mh_filter() ipv6: raw: fix icmpv6_filter() net: guard tcp_set_keepalive() to tcp sockets phy/micrel: Add missing header to micrel_phy.h phy/micrel: Rename KS80xx to KSZ80xx phy/micrel: Implement support for KSZ8021 batman-adv: Fix symmetry check / route flapping in multi interface setups batman-adv: Fix change mac address of soft iface. pppoe: drop PPPOX_ZOMBIEs in pppoe_release team: send port changed when added ipv4: raw: fix icmp_filter() net/phy/bcm87xx: Add MODULE_LICENSE("GPL") to GPL driver iwlwifi: don't double free the interrupt in failure path cfg80211: fix possible circular lock on reg_regdb_search() Bluetooth: Fix not removing power_off delayed work Bluetooth: Fix freeing uninitialized delayed works Bluetooth: mgmt: Fix enabling LE while powered off Bluetooth: mgmt: Fix enabling SSP while powered off
2012-09-24phy/micrel: Rename KS80xx to KSZ80xxMarek Vasut
There is no such part as KS8001, KS8041 or KS8051. There are only KSZ8001, KSZ8041 and KSZ8051. Rename these parts as such to match the Micrel naming. Signed-off-by: Marek Vasut <marex@denx.de> Cc: David J. Choi <david.choi@micrel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Cc: Linux ARM kernel <linux-arm-kernel@lists.infradead.org> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-24ARM: OMAP2+: serial: Change MAX_HSUART_PORTS to 6AnilKumar Ch
Extends the maximum number of UART ports to 6 from 4 because AM335X device have six UART ports. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-24ARM: OMAP4: twl-common: Support for additional devices on i2c1 busPeter Ujfalusi
On OMAP4 the i2c1 bus is dedicated for the PMIC and audio related devices. Manufacturers can opt to use different codec than twl6040 and also can add audio related IC to the bus (external amplifier for example on SDP4430). Make it possible to add different set of additional devices to i2c1 bus on OMAP4 boards. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> [tony@atomide.com: updated for removal of irqs.h] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-24ARM: dma-mapping: Fix potential memory leak in atomic_pool_init()Sachin Kamat
When either of __alloc_from_contiguous or __alloc_remap_buffer fails to provide a valid pointer, allocated memory is freed up and an error is returned. 'pages' was however not freed before returning error. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2012-09-23hwmon: (sht15) move header to linux/platform_data/Vivien Didelot
This patch moves the sht15.h header from include/linux to include/linux/platform_data, and update existing support (stargate2 platform) accordingly. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-09-22Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM and clkdev fixes from Russell King: "Two patches for clkdev which resolve the long standing issue that the devm_* versions were dependent on clkdev, which they shouldn't have been. Instead, they're dependent on HAVE_CLK instead, which implies that you're providing clk_get() and clk_put(). A small fix to the ARM decompressor to ensure that the page tables are properly interpreted by the CPU, and reserve syscall 378 for kcmp (the checksyscalls.sh script is unfortunately currently broken so arch maintainers aren't getting notified of new syscalls...) Lastly, a larger fix for an issue between the common clk subsystem and smp_twd which causes warnings to be spat out." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: reserve syscall 378 for kcmp ARM: 7535/1: Reprogram smp_twd based on new common clk framework notifiers ARM: 7537/1: clk: Fix release in devm_clk_put() ARM: 7532/1: decompressor: reset SCTLR.TRE for VMSA ARMv7 cores ARM: 7534/1: clk: Make the managed clk functions generically available
2012-09-22Merge branch 'cleanup/__iomem' into next/cleanupOlof Johansson
__iomem annotation cleanup branch from Arnd. * cleanup/__iomem: (21 commits) net: seeq: use __iomem pointers for MMIO video: da8xx-fb: use __iomem pointers for MMIO scsi: eesox: use __iomem pointers for MMIO serial: ks8695: use __iomem pointers for MMIO input: rpcmouse: use __iomem pointers for MMIO ARM: samsung: use __iomem pointers for MMIO ARM: spear13xx: use __iomem pointers for MMIO ARM: sa1100: use __iomem pointers for MMIO ARM: prima2: use __iomem pointers for MMIO ARM: nomadik: use __iomem pointers for MMIO ARM: msm: use __iomem pointers for MMIO ARM: lpc32xx: use __iomem pointers for MMIO ARM: ks8695: use __iomem pointers for MMIO ARM: ixp4xx: use __iomem pointers for MMIO ARM: iop32x: use __iomem pointers for MMIO ARM: iop13xx: use __iomem pointers for MMIO ARM: integrator: use __iomem pointers for MMIO ARM: imx: use __iomem pointers for MMIO ARM: ebsa110: use __iomem pointers for MMIO ARM: at91: use __iomem pointers for MMIO ... Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-21Merge branch 'board' of git://github.com/hzhuang1/linux into next/cleanupOlof Johansson
* 'board' of git://github.com/hzhuang1/linux: ARM: mmp: using for_each_set_bit to simplify the code
2012-09-21Merge branch 'v3.7-samsung-fixes-1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/fixes-non-critical A few non-critical fixes/cleanups for samsung platforms. * 'v3.7-samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: SAMSUNG: Add missing variable declaration in s3c64xx_spi1_set_platdata() ARM: S3C24XX: removes unnecessary semicolon ARM: S3C24xx: delete double assignment ARM: EXYNOS: fix address for EXYNOS4 MDMA1 ARM: EXYNOS: fixed SYSMMU setup definition to mate parameter name + sync to 3.6-rc6
2012-09-21ARM: reserve syscall 378 for kcmpRussell King
kcmp has appeared on x86, but has not been noticed because checksyscalls.sh is broken at the moment. Reserve ARM syscall 378 for this should we ever need it, and add an __IGNORE entry for this unimplemented syscall. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-09-21ARM: mmp: using for_each_set_bit to simplify the codeWei Yongjun
Using for_each_set_bit() to simplify the code. spatch with a semantic match is used to found this. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-09-21ARM: SAMSUNG: Add missing variable declaration in s3c64xx_spi1_set_platdata()Sylwester Nawrocki
Fixes regression introduced in commit 4d0efdd5889b ("ARM: SAMSUNG: Modify s3c64xx_spi{0|1|2}_set_platdata function") Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-09-21ARM: S3C24XX: removes unnecessary semicolonPeter Senna Tschudin
removes unnecessary semicolon Found by Coccinelle: http://coccinelle.lip6.fr/ Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-09-21ARM: S3C24xx: delete double assignmentJulia Lawall
Delete successive assignments to the same location. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression i; @@ *i = ...; i = ...; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-09-21ARM: EXYNOS: fix address for EXYNOS4 MDMA1Kukjin Kim
use non-secure mdma1 address. Reported-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-09-21ARM: EXYNOS: fixed SYSMMU setup definition to mate parameter nameSeung-Woo Kim
This is trivial patch to mate parameter name between iommu api enabled case and disabled case. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: KyongHo Cho <pullip.cho@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-09-20Merge tag 'omap-cleanup-local-headers-for-v3.7' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup From Tony Lindgren: This branch contains mostly scripted changes to make omap header files local where possible to get us closer to supporting the ARM single zImage. After these changes mach includes are pretty much out of the way for omap2+, but still lots of manual work remains to sort through the remaining plat includes. * tag 'omap-cleanup-local-headers-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (26 commits) ARM: OMAP2+: Make omap4-keypad.h local ARM: OMAP2+: Make l4_3xxx.h local ARM: OMAP2+: Make l4_2xxx.h local ARM: OMAP2+: Make l3_3xxx.h local ARM: OMAP2+: Make l3_2xxx.h local ARM: OMAP1: Move irda.h from plat to mach ARM: OMAP2+: Make hdq1w.h local ARM: OMAP2+: Make gpmc-smsc911x.h local ARM: OMAP2+: Make gpmc-smc91x.h local ARM: OMAP1: Move flash.h from plat to mach ARM: OMAP2+: Make debug-devices.h local ARM: OMAP1: Move board-voiceblue.h from plat to mach ARM: OMAP1: Move board-sx1.h from plat to mach ARM: OMAP2+: Make omap-wakeupgen.h local ARM: OMAP2+: Make omap-secure.h local ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local ARM: OMAP2+: Make ctrl_module_pad_wkup_44xx.h local ARM: OMAP2+: Make ctrl_module_pad_core_44xx.h local ARM: OMAP2+: Make ctrl_module_core_44xx.h local ARM: OMAP2+: Make board-rx51.h local ...
2012-09-20Merge tag 'tegra-for-3.7-dmaengine' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/cleanup ARM: tegra: switch to dmaengine The Tegra code-base has contained both a legacy DMA and a dmaengine driver since v3.6-rcX. This series flips Tegra's defconfig to enable dmaengine rather than the legacy driver, and removes the legacy driver and all client code. * tag 'tegra-for-3.7-dmaengine' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: ASoC: tegra: remove support of legacy DMA driver based access spi: tegra: remove support of legacy DMA driver based access ARM: tegra: apbio: remove support of legacy DMA driver based access ARM: tegra: dma: remove legacy APB DMA driver ARM: tegra: config: enable dmaengine based APB DMA driver + sync to 3.6-rc6
2012-09-20ARM: tegra: harmony: fix ldo7 regulator-nameStephen Warren
On Harmony, LDO7 does not feed vdd_fuse. Correct the regulator name. This issue was probably the result of copying Ventana's regulator setup when creating the Harmony .dts file. No other naming issues appear to exist. Reported-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-20Merge branch 'samsung/cleanup' into next/cleanupOlof Johansson
From Kukjin Kim: Here, there are cleanup patches for Samsung v3.7 and most of them are related to cleanup Samsung specific gpio API. * samsung/cleanup: gpio: samsung: Update documentation ARM: S3C24XX: Use module_platform_driver macro in mach-osiris-dvs.c ARM: S3C24XX: Use module_platform_driver macro in h1940-bluetooth.c gpio-samsung: Remove now unused s3c2410_gpio* API ARM: S3C24XX: Remove obsolete GPIO API declarations ARM: S3C24XX: Convert users of s3c2410_gpio_setpin to gpiolib API ARM: EXYNOS: cleanup unused code related to GPS
2012-09-20ARM: OMAP2+: Make omap4-keypad.h localTony Lindgren
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP2+: Make l4_3xxx.h localTony Lindgren
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP2+: Make l4_2xxx.h localTony Lindgren
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP2+: Make l3_3xxx.h localTony Lindgren
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP2+: Make l3_2xxx.h localTony Lindgren
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP1: Move irda.h from plat to machTony Lindgren
This is only used by omap1. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP2+: Make hdq1w.h localTony Lindgren
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP2+: Make gpmc-smsc911x.h localTony Lindgren
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP2+: Make gpmc-smc91x.h localTony Lindgren
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP1: Move flash.h from plat to machTony Lindgren
This is only used by omap1. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP2+: Make debug-devices.h localTony Lindgren
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP1: Move board-voiceblue.h from plat to machTony Lindgren
This is only used by omap1. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP1: Move board-sx1.h from plat to machTony Lindgren
This is only used by omap1. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP2+: Make omap-wakeupgen.h localTony Lindgren
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>