aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/plat-s5p
AgeCommit message (Collapse)Author
2011-07-12Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: pcmcia: pxa2xx/vpac270: free gpios on exist rather than requesting ARM: pxa/raumfeld: fix device name for codec ak4104 ARM: pxa/raumfeld: display initialisation fixes ARM: pxa/raumfeld: adapt to upcoming hardware change ARM: pxa: fix gpio_to_chip() clash with gpiolib namespace genirq: replace irq_gc_ack() with {set,clr}_bit variants (fwd) arm: mach-vt8500: add forgotten irq_data conversion ARM: pxa168: correct nand pmu setting ARM: pxa910: correct nand pmu setting ARM: pxa: fix PGSR register address calculation
2011-07-07genirq: replace irq_gc_ack() with {set,clr}_bit variants (fwd)Simon Guinot
This fixes a regression introduced by e59347a "arm: orion: Use generic irq chip". Depending on the device, interrupts acknowledgement is done by setting or by clearing a dedicated register. Replace irq_gc_ack() with some {set,clr}_bit variants allows to handle both cases. Note that this patch affects the following SoCs: Davinci, Samsung and Orion. Except for this last, the change is minor: irq_gc_ack() is just renamed into irq_gc_ack_set_bit(). For the Orion SoCs, the edge GPIO interrupts support is currently broken. irq_gc_ack() try to acknowledge a such interrupt by setting the corresponding cause register bit. The Orion GPIO device expect the opposite. To fix this issue, the irq_gc_ack_clr_bit() variant is used. Tested on Network Space v2. Reported-by: Joey Oravec <joravec@drewtech.com> Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-07-06ARM: S5P: Fix bug on init of PWMTimers for HRTimerSangbeom Kim
This patch fixes following. <6>[ 0.000000] sched_clock: 32 bits at 33MHz, ... <6>[ 128.651309] Calibrating delay loop... There is a big jump. The reason is that PWM Timer which is for HRTimer was used before its initialization. So this patch changes its order and following is kernel boot log message after this. <6>[ 0.000000] sched_clock: 32 bits at 33MHz, ... <6>[ 0.000088] Calibrating delay loop... Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-06-03ARM: SAMSUNG: Remove unused onenand plat functionsKyungmin Park
There's no place to use these functions. and actually no need to set the platform data. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-06-01ARM: S5P: Should be S3C_VA_USB_HSPHY instead of S5P_VA_XXKukjin Kim
Basically, other S3C SoCs and S5PC100 use 'S3C_VA_USB_HSPHY' commonly. It should be changed to 'S3C_VA_USB_HSPHY' for common usage and others. Now happens build error on S5PC100. Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-05-25Merge branch 'for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into devel-stable Conflicts: arch/arm/Kconfig arch/arm/mach-exynos4/mach-nuri.c
2011-05-23Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (137 commits) ARM: bcmring: convert to use sp804 clockevents ARM: bcmring: convert to sp804 clocksource ARM: 6912/1: bcmring: Add clkdev table in init_early clockevents: ARM sp804: obtain sp804 timer rate via clks clockevents: ARM sp804: allow clockevent name to be specified clocksource: ARM sp804: obtain sp804 timer rate via clks clocksource: ARM sp804: allow clocksource name to be specified clocksource: convert OMAP1 to 32-bit down counting clocksource clocksource: convert MXS timrotv2 to 32-bit down counting clocksource clocksource: convert SPEAr platforms 16-bit up counting clocksource clocksource: convert Integrator/AP 16-bit down counting clocksource clocksource: convert W90x900 24-bit down counting clocksource clocksource: convert ARM 32-bit down counting clocksources clocksource: convert ARM 32-bit up counting clocksources clocksource: add common mmio clocksource ARM: update sa1100 to reflect PXA updates ARM: omap1: convert to using readl/writel instead of volatile struct ARM: omap1: delete useless interrupt handler ARM: s5p: consolidate selection of timer register ARM: 6939/1: fix missing 'cpu_relax()' declaration ...
2011-05-23Merge branch 'usb-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (205 commits) USB: EHCI: Remove SPARC_LEON {read,write}_be definitions from ehci.h USB: UHCI: Support big endian GRUSBHC HC sparc: add {read,write}*_be routines USB: UHCI: Add support for big endian descriptors USB: UHCI: Use ACCESS_ONCE rather than using a full compiler barrier USB: UHCI: Add support for big endian mmio usb-storage: Correct adjust_quirks to include latest flags usb/isp1760: Fix possible unlink problems usb/isp1760: Move function isp1760_endpoint_disable() within file. USB: remove remaining usages of hcd->state from usbcore and fix regression usb: musb: ux500: add configuration and build options for ux500 dma usb: musb: ux500: add dma glue layer for ux500 usb: musb: ux500: add dma name for ux500 usb: musb: ux500: add ux500 specific code for gadget side usb: musb: fix compile error usb-storage: fix up the unusual_realtek device list USB: gadget: f_audio: Fix invalid dereference of initdata EHCI: don't rescan interrupt QHs needlessly OHCI: fix regression caused by nVidia shutdown workaround USB: OTG: msm: Free VCCCX regulator even if we can't set the voltage ...
2011-05-23Merge branch 'devel-stable' into for-linusRussell King
Conflicts: arch/arm/Kconfig arch/arm/mach-ns9xxx/include/mach/uncompress.h
2011-05-23ARM: s5p: consolidate selection of timer registerRussell King
s5p duplicates the runtime selection of the timer register three times. Move this out into a separate function. FIXME: It is unclear whether this code needs to support true runtime selection of the timer register, or whether it can be selected once at init time. Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-12ARM: S5P6442: Removing ARCH_S5P6442Kukjin Kim
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-05-09ARM: SAMSUNG: Convert irq-vic-timer to generic irq chipThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-09ARM: SAMSUNG: S5P: Convert irq-gpioint to generic irq chipThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-24ARM / Samsung: Use struct syscore_ops for "core" power managementRafael J. Wysocki
Replace sysdev classes and struct sys_device objects used for "core" power management by Samsung platforms with struct syscore_ops objects that are simpler. This generally reduces the code size and the kernel memory footprint. It also is necessary for removing sysdevs entirely from the kernel in the future. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2011-04-19Merge 2.6.39-rc4 into usb-nextGreg Kroah-Hartman
This is needed to help resolve some xhci issues and other minor differences. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-14ARM: S5P: Remove unused s3c_pm_check_resume_pinAbhilash Kesavan
The s3c_pm_check_resume_pin() is not being used and can be safely removed to fix the build warning. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-04-13ARM: EXYNOS4: Add usb host phy controlJoonyoung Shim
EXYNOS4 has 2 phys for usb host and usb device. This patch supports to control usb host phy of EXYNOS4. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13ARM: S5P: Add usb ehci deviceJoonyoung Shim
This patch adds usb ehci device definition for samsung s5p cpus. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-29arm: Fold irq_set_chip/irq_set_handlerThomas Gleixner
Use irq_set_chip_and_handler() instead. Converted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29arm: Cleanup the irq namespaceThomas Gleixner
Convert to the new function names. Automated with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-28ARM: SAMSUNG: Fix CPU idmaskKukjin Kim
This patch fixes CPU idmask of S5P64X0 and EXYNOS4210 and its comparison method because just want to use CPU id for it. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-15ARM: EXYNOS4: Implement Clock gating for System MMUKyongHo Cho
This patch includes the implementation of the clock gating for System MMU. Initially, all System MMUs are not asserted the system clock. Asserting the system clock to a System MMU is enabled only when s5p_sysmmu_enable() is called. Likewise, it is disabled only when s5p_sysmmu_disable() is called. Therefore, clock gating on System MMUs are still invisible to the outside of the System MMU driver. Signed-off-by: KyongHo Cho <pullip.cho@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-15ARM: EXYNOS4: Enhancement of System MMU driverKyongHo Cho
This patch includes the following enhancements for System MMU: - Enhanced readability - Removal of unused data structures or their members - Simplified function definitions - Corrections of some logical errors - Full compliance with Linux coding style - Simpler way of registering callback functions of System MMU faults Signed-off-by: KyongHo Cho <pullip.cho@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-15ARM: S5P: Add function to register gpio interrupt bank dataMarek Szyprowski
This patch removes all global data from common s5p gpio interrupt handler code. This enables to reuse this code on EXYNOS4 platform. Instead of global data (IRQ_GPIOINT interrupt number, S5P_GPIOINT_GROUP_MAXNR groups count), a s5p_register_gpioint_bank() function is introduced. It is aimed to be called from gpiolib init. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-15ARM: S5P: Cleanup S5P gpio interrupt codeMarek Szyprowski
This patch performs a global cleanup in s5p gpio interrupt support code. The code is prepared for upcoming support for gpio interrupts on EXYNOS4 platform, which has 2 gpio banks (regions) instead of one (like on S5PC110 and S5PC100). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-12ARM: S5P: Add platform definitions for FIMC3Sylwester Nawrocki
Add support for fourth FIMC platform device definition and define resources for FIMC modules on EXYNOS4 machines. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-12ARM: S5P: Update defconfig for HRT supportSangbeom Kim
This patch updates s5pv210_defconfig and s5p64x0_defconfig for HRT support and CONFIG_S5P_HRT is used for its configuration. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-12ARM: S5P: HRT supportSangbeom Kim
This patch adds support HR-Timer(High Resolution Timer) and dynamic tick system for S5P SoCs. There are many clock sources for HR-Timer on S5P SoCs. The PWM timer, RTC, System Timer, and MCT can be used for clock source. This patch can only support PWM timer for clock source of S5P64X0 and S5PV210. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-11ARM: S5P: Add support for common MIPI CSIS/DSIM D-PHY controlSylwester Nawrocki
Add common code for MIPI-CSIS and MIPI-DSIM drivers to support their corresponding D-PHY's enable and reset control. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-11ARM: S5P: Extend MIPI-CSIS platform_data with the PHY control callbackSylwester Nawrocki
Extend MIPI-CSIS driver's platform data structure with a callback for D-PHY enable and reset control. Also add a flag indicating whether the external MIPI-CSI (VDD18_MIPI) power supply should be managed in the driver through the "vdd" power supply. On some boards this regulator may be a fixed voltage regulator without an inhibit function. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-11ARM: S5P: Rename MIPI-CSIS driver header and update CopyrightSylwester Nawrocki
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-11ARM: S5P: Add platform helpers for camera GPIO configurationSylwester Nawrocki
Add functions for configuration of the parallel camera bus pins on S5PV210 and Exynos4 SoC. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-02-22ARM: EXYNOS4: Update Kconfig and Makefile for the new ARCH_EXYNOS4Kukjin Kim
This patch changes the Kconfig and Makefile for the new ARCH_EXYNOS4. It also updates arch/arm/Kconfig, Makeifile and arch/arm/mm/Kconfig to include support for the new ARCH_EXYNOS4. Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-02-22ARM: EXYNOS4: Add EXYNOS4 CPU initialization supportKukjin Kim
This patch adds EXYNOS4 CPU support files in mach-exynos4, and basically they are moved from mach-s5pv310 so that it can support Samsung's new CPU name, EXYNOS4. The EXYNOS4 ingegrates a ARM Cortex A9 multi-core. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-02-17ARM: S5P: Fix end address in memory resource information for UART devicesThomas Abraham
For S5P platforms, the end address in memory resource information for UART devices is one byte more than the intended value. Fix this by reducing the end address by one byte. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-02-11ARM: S5PV310: Cleanup System MMUKukjin Kim
This patch cleans following up. - Moved definition of System MMU IPNUM into mach/sysmmu.h - Removed useless SYSMMU_DEBUG configuration - Removed useless header file plat/sysmmu.h Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-13ARM: S5P: Add Support System MMUDonguk Ryu
This patch adds support System MMU which supports address transition from virtual address to physical address. Basically, each hardware block is connected System MMU block can use directly vitrual address when it accesses physical memory not using physical address. Signed-off-by: Donguk Ryu <du.ryu@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> [kgene.kim@samsung.com: removed useless codes] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-03Merge branch 'next-samsung-irq_data' into for-nextKukjin Kim
2011-01-03ARM: S5P: irq_data conversionLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-31Merge branch 'next-s5pv310' into for-nextKukjin Kim
Conflicts: arch/arm/mach-s5pv310/Kconfig arch/arm/mach-s5pv310/Makefile arch/arm/mach-s5pv310/mach-smdkc210.c arch/arm/mach-s5pv310/mach-smdkv310.c arch/arm/plat-samsung/include/plat/devs.h
2010-12-30Merge branch 'next-s5p' into for-next-newKukjin Kim
2010-12-30ARM: S5P: Add platform support for MIPI CSIS devicesSylwester Nawrocki
There may be up to two MIPI CSI slave interfaces depending on the SoC version. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: S5P: Move SROM controller IO mapping to plat-s5p for S5P SoCsThomas Abraham
This patch modifies the following. 1. Moves the SROM controller mapping from S5PV210 specific code to S5P common code. The SROM controller mapping can be used for all S5P SoCs. 2. Define the SROM controller physical address for S5P64X0, S5P6442, S5PC100, S5PV210 and S5PV310. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: S5P: Add SROM bank 4 and 5 register offsetsThomas Abraham
Some of the S5P platforms like S5PC100 and S5PV210 include SROM banks 4 and 5 in addition to SROM banks 0 to 3. This patch adds register offsets for SROM bank 4 and 5. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: S5P: Add SROM control register shift macros for other banks.Thomas Abraham
This patch adds shift macros for the SROM Bus width and control register to represent the shift count for the 5th and 6th SROM banks. Some of the S5P SOCs have them. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: S5P: Move the SROM register definitions to plat-s5pKukjin Kim
The SROM register difinitions of S5PV310/S5PC210 (mach/regs-srom.h) can be used to other S5P SoCs such as S5PV210/S5PC110. So moved into plat/regs-srom.h of plat-s5p directory. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: S5PV310: Add support Power DomainChanghwan Youn
This patch adds support Power Domain for S5PV310 and S5PC210. Signed-off-by: Changhwan Youn <chaos.youn at samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: SAMSUNG: Convert s3c_irqext_wake() to new irq_ interrupt methodsMark Brown
Kernel 2.6.37 adds new interrupt methods which take a struct irq_data rather than an irq number. Begin converting Samsung platforms over to these methods by converting s3c_irqext_wake() with a simple textual substitution. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25ARM: S5P: Add initial map for GPIO2 and GPIO3Jongpill Lee
This patch adds initial map for GPIO2 and GPIO3. S5PV310/S5PC210 has separated GPIO1, GPIO2 and GPIO3. Signed-off-by: Jongpill Lee <boyko.lee@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-29 06:01:55 +0000