aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/plat-mxc
AgeCommit message (Collapse)Author
2010-11-24imx51: enhance iomux configuration for esdhc supportArnaud Patard (Rtp)
- add definition to configure pads as ESDHC{1,2} WP and CD Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24imx51: fix iomux configurationArnaud Patard (Rtp)
- ALT0 is used to set GPIO mode of GPIO_1_{2,3,4,5,6,7,8,9} but it's ALT1 for GPIO_1_{0,1}. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24ARM: i.MX IOMUX-V3 replace struct pad_desc with bitmapped cookieLothar Waßmann
The following patch is a first step to convert the 'struct pad_desc' to a bitmapped cookie to facilitate adding platform specific pullup or drive strength definitions to existing pad definitions without need to rewrite the complete pad def. The patch wraps 'struct pad_desc' in an opaque data type and introduces macros to access the individual members. This patch does not constitute any functional change! Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24Merge branch 'imx-for-2.6.38' of git://git.pengutronix.de/git/ukl/linux-2.6 ↵Sascha Hauer
into imx-for-2.6.38
2010-11-19ARM: imx: fix name for functions adding sdhci-esdhc-imx devicesUwe Kleine-König
and restore alphabetic ordering. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-19ARM: mx3: dynamically allocate imx-keypad devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-19ARM: mx3: dynamically allocate imx2-wdt devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-19ARM: mx3: dynamically allocate mxc-ehci devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-19ARM: mx3: dynamically allocate fsl-usb2-udc devicesUwe Kleine-König
While adapting the #defines for this I noticed that the offset used for USB HS on i.MX35 differs from the documented offset. I kept the working offset and commented that the documentation differs. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-19ARM: mx3: dynamically allocate mxc_rnga devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-19ARM: mx3: dynamically register mxc-mmc devicesUwe Kleine-König
Compared to the static devices the dynamic have a DMA resource. This should be save as it seems unused in the driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-19ARM: mx3: introduce SOC_IMX31 and SOC_IMX35Uwe Kleine-König
Additionally convert some known to be good usages to the new names. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-19ARM: mx3: move registration of gpios to plat-mxc/gpio.cUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-19ARM: imx: use SOC_IMX25 instead of ARCH_MX25 for multi-SoCUwe Kleine-König
Some usages of ARCH_MX25 are assuming that if it is defined the other SoCs are undefined. Use SOC_IMX25 for the save places. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-19ARM: imx: let IMX_HAVE_PLATFORM_IMX_FB select HAVE_FB_IMXUwe Kleine-König
This way FB_IMX can just depend on HAVE_FB_IMX and machines just need to select IMX_HAVE_PLATFORM_IMX_FB without bothering about HAVE_FB_IMX. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-19ARM: imx: move mx25 support to mach-imxUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-19ARM: mx25: dynamically allocate mx2-camera devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-19ARM: mx25: dynamically allocate imx2-wdt devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: mx25: dynamically allocatate imx-fb devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: mx25: dynamically allocate imxdi_rtc devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: mx25: dynamically allocate imx-keypad devicesUwe Kleine-König
The mxc-keypad device seems to be the result of an early and partial merge of the keypad driver. It's unused and there is no corresponding driver available, so just remove it. Cc: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: mx25: move registration of gpios to plat-mxc/gpio.cUwe Kleine-König
To use common macros to define the gpio ports for imx{1,21,25,27} the existing ones had to made more general and a few more base address defines were necessary. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: mx25: dynamically allocate mxc_pwm devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: mx25: dynamically allocate fsl-usb2-udc devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: mx25: dynamically allocate mxc-ehci devicesUwe Kleine-König
According to the reference manual of the i.MX25 the host controller uses an offset of 0x200 not 0x400 as was specified in the resources for mxc_usbh2. Needs-Testing: yes Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: move registration of gpios to plat-mxc/gpio.cUwe Kleine-König
This finally gets rid of mach-imx/devices.c. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: dynamically allocate imx21-hcd devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: dynamically allocate imx-keypad devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: dynamically allocate fsl-usb2-udc devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: dynamically allocate mxc-ehci devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: dynamically register mxc-mmc devicesUwe Kleine-König
... plus a trivial simplification of mx21ads_sdhc_init() Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: dynamically allocate mxc_pwm devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: dynamically register imx-fb devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: change the way flexcan devices are registeredUwe Kleine-König
Group soc specific data in a global struct instead of repeating it for each call to imxXX_add_flexcanX. The structs holding the actual data are placed in .init.constdata and so don't do much harm. Compared to the previous approach this reduces code size to call imx_add_flexcan. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: dynamically allocate imx2-wdt devicesUwe Kleine-König
Currently there is no platform data used in the driver. In case this changes and for consistency NULL is passed unused to the soc specific functions. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: dynamically allocate mx2-camera deviceUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx/gpio: remove some useless castsUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: dynamically allocate mx1-camera deviceUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: allow specifying a dma mask when creating a platform deviceUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: dynamically allocate imx_udc deviceUwe Kleine-König
This is only available for mx1 machines with no in-tree user. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: dynamically allocate mxc_w1 devicesUwe Kleine-König
Currently there is no platform data used in the driver. In case this changes NULL is passed unused to the soc specific functions. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: remove deprecated symbols as all users are gone nowUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx/debug-macro: rework using the new io mapping macroUwe Kleine-König
This gets rid of the last user of IMX_NEEDS_DEPRECATED_SYMBOLS. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: change static io mapping to use a functionUwe Kleine-König
Now only the virtual addresses [0xf4000000, 0xf5ffffff] are used for static per-SoC mappings. The few mappings of whole chip selects are moved accordingly. The now wrong defines for virtual base addresses are removed. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: remove last explicit users of virtual base address definesUwe Kleine-König
This allows changing the mapping without the need to adapt all users. While at it remove some unneeded casts to void __iomem *, this is already taken care for in the IO_ADDRESS macros Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: use MXxy_IO_P2V macros to setup static mappingsUwe Kleine-König
This makes less code rely on the virtual constants. To further simplify code and reduce the needed boilerplate when defining the static mappings a new helper macro is defined in mach/hardware.h. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: refactor the io mapping macroUwe Kleine-König
This makes it more assembler friendly and allows it to be used in situation that need an unsigned long and not a pointer. Also the naming is clearer. IOMEM is introduced without IMX_ prefix as it is used this way in more than one ARM subarch and it might become globally available soon. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-15ARM i.MX spi: fix compilation for i.MX21Sascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-15ARM i.MX: sdma is merged, so remove #ifdef SDMA_IS_MERGEDSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-01tree-wide: fix comment/printk typosUwe Kleine-König
"gadget", "through", "command", "maintain", "maintain", "controller", "address", "between", "initiali[zs]e", "instead", "function", "select", "already", "equal", "access", "management", "hierarchy", "registration", "interest", "relative", "memory", "offset", "already", Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2025-03-26 03:54:44 +0000