aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-ux500/include
AgeCommit message (Collapse)Author
2011-05-26ARM: 6828/1: mach-ux500: delete SSP PrimeCell IDLinus Walleij
This is redundant. The correct ID number is right there in the hardware anyway. We will introduce a mechanism later to hard-code this for deviant cells. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-24mach-ux500: move the DB8500 PRCMU driver to MFDLinus Walleij
We have decided that this function arbiter fits better in the MFD subsystem. Since we need to concatenate the split header files we move it basically like this: mv mach-ux500/prcmu-db8500.c drivers/mfd/db8500-prcmu.c mv mach-ux500/include/mach/prcmu-defs.h include/linux/mfd/db8500-prcmu.h mv mach-ux500/include/mach/prcmu-regs.h drivers/mfd/db8500-prcmu-regs.h mach-ux500/include/mach/prcmu.h >> include/linux/mfd/db8500-prcmu.h rm arch/arm/mach-ux500/include/mach/prcmu.h Then we update different #include statements and Makefile orders etc to make the PRCMU driver compile, link and boot in the new place without really changing any code. Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-05-24mach-ux500: make PRCMU base address dynamicLinus Walleij
This makes the PRCMU base address be selected at runtime for U8500 and U5500 instead of being compiled-in. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-05-24mach-ux500: update ASIC version detectionLinus Walleij
This makes the core detect the DB8500 V2.0 and V2.1 ASICs, and add a convenience macro for "V2 or later". Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-05-24mach-ux500: update SoC and board IRQ handlingRabin Vincent
This splits out a per-SoC IRQ range handling, so that the DB8500 and DB5500 SoC:s can reuse aproximately the same IRQ range with the largest span setting the roof. The same change is done for the boards, mutatis mutandis, with a new file for the U5500 board. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-05-24mach-ux500: update the DB5500 register fileLinus Walleij
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-05-24mach-ux500: update the DB8500 register fileLinus Walleij
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-05-23Merge branch 'devel-stable' into for-linusRussell King
Conflicts: arch/arm/Kconfig arch/arm/mach-ns9xxx/include/mach/uncompress.h
2011-05-23Merge branches 'consolidate-clksrc', 'consolidate-flash', ↵Russell King
'consolidate-generic', 'consolidate-smp', 'consolidate-stmp' and 'consolidate-zones' into consolidate
2011-05-23ARM: consolidate SMP cross call implementationRussell King
Rather than having each platform class provide a mach/smp.h header for smp_cross_call(), arrange for them to register the function with the core ARM SMP code instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-07Merge branch 'zImage_fixes' of git://git.linaro.org/people/nico/linux into ↵Russell King
devel-stable
2011-05-07ARM: zImage: remove the static qualifier from global data variablesNicolas Pitre
To be able to relocate the .bss section at run time independently from the rest of the code, we must make sure that no GOTOFF relocations are used with .bss symbols. This usually means that no global variables can be marked static unless they're also const. Let's remove the static qualifier from current offenders, or turn them into const variables when possible. Next commit will ensure the build fails if one of those is reintroduced due to otherwise enforced coding standards for the kernel. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Tested-by: Tony Lindgren <tony@atomide.com>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-28mach-ux500: board support for AB8500 GPIO driverBibek Basu
This is the board support patch for ab8500 gpio driver on mach-ux500.Patch implements 16 virtual IRQ mapped to 16 interrupt capable AB8500 GPIOs. Signed-off-by: Bibek Basu <bibek.basu@stericsson.com> [Modify for header file placement] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-17Merge branch 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm: (289 commits) davinci: DM644x EVM: register MUSB device earlier davinci: add spi devices on tnetv107x evm davinci: add ssp config for tnetv107x evm board davinci: add tnetv107x ssp platform device spi: add ti-ssp spi master driver mfd: add driver for sequencer serial port ARM: EXYNOS4: Implement Clock gating for System MMU ARM: EXYNOS4: Enhancement of System MMU driver ARM: EXYNOS4: Add support for gpio interrupts ARM: S5P: Add function to register gpio interrupt bank data ARM: S5P: Cleanup S5P gpio interrupt code ARM: EXYNOS4: Add missing GPYx banks ARM: S3C64XX: Fix section mismatch from cpufreq init ARM: EXYNOS4: Add keypad device to the SMDKV310 ARM: EXYNOS4: Update clocks for keypad ARM: EXYNOS4: Update keypad base address ARM: EXYNOS4: Add keypad device helpers ARM: EXYNOS4: Add support for SATA on ARMLEX4210 plat-nomadik: make GPIO interrupts work with cpuidle ApSleep mach-u300: define a dummy filter function for coh901318 ... Fix up various conflicts in - arch/arm/mach-exynos4/cpufreq.c - arch/arm/mach-mxs/gpio.c - drivers/net/Kconfig - drivers/tty/serial/Kconfig - drivers/tty/serial/Makefile - drivers/usb/gadget/fsl_mxc_udc.c - drivers/video/Kconfig
2011-03-14mach-ux500: basic HREFv60 support v2Linus Walleij
The HREFv60 variant of the MOP500 family of boards remove the external GPIO expander and route these pins back to some of the readily available internal GPIO pins instead. Based on a patch by Bibek Basu <bibek.basu@stericsson.com> for an internal kernel version. Cc: Bibek Basu <bibek.basu@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: add platform data for musbMian Yousaf Kaukab
USB resources and DMA40 configurations are dynamically with the data provided in ux500_add_usb() call. Though only DMA40 configurations differ between U8500 and U5500 (USB resource are common between them). Signed-off-by: Mian Yousaf Kaukab <mian-yousaf.kaukab@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-02-17ARM: P2V: separate PHYS_OFFSET from platform definitionsRussell King
This uncouple PHYS_OFFSET from the platform definitions, thereby facilitating run-time computation of the physical memory offset. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Magnus Damm <damm@opensource.se> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: Jiandong Zheng <jdzheng@broadcom.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-10ux500: dynamic SOC detectionRabin Vincent
Dynamically detect the DBx500 SOC an revision based on the ASIC ID. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2011-01-10ux500: rename MOP board KconfigRabin Vincent
Rename the MOP board Kconfig entries to the same name as the machine type, so that the machine_is_*() macros work correctly. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> [Updated to match changes in the tree] Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2011-01-10ux500: remove build-time changing macrosRabin Vincent
To allow the possiblity of building U8500 and U5500 support in the same image. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> [Rebased to latest changes in Russells tree] Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2011-01-06Merge branch 'devel-stable' into develRussell King
Conflicts: arch/arm/mach-pxa/clock.c arch/arm/mach-pxa/clock.h
2011-01-06Merge branch 'misc' into develRussell King
Conflicts: arch/arm/Kconfig arch/arm/common/Makefile arch/arm/kernel/Makefile arch/arm/kernel/smp.c
2010-12-22ux500: rename modem IRQ and MBOX filesLinus Walleij
Suffix the U5500 modem IRQ and MBOX files with *-db5500* so that we clearly know the SoC they belong to, in line with the rest of the files in mach-ux500. Cc: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> Cc: Martin Persson <martin.persson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-20ARM: SMP: remove smp_mpidr.hRussell King
With "ARM: CPU hotplug: remove bug checks in platform_cpu_die()", we now do not use hard_smp_processor_id(), we no longer need to read the hardware processor ID. Remove the include providing this function. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-19mach-ux500: add STMPE1601 platform dataSundar Iyer
Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> [Minor fixups to GPIO enumerators] Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-14ARM: GIC: private a standard get_irqnr_preamble assembler macroRussell King
Provide a standard get_irqnr_preamble assembler macro for platforms to use, which retrieves the base address of the GIC CPU interface from gic_cpu_base_addr. Allow platforms to override this by defining HAVE_GET_IRQNR_PREAMBLE. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-09ux500: Add prcmu support for operating pointsMartin Persson
Adds support in PRCMU driver to handle CPU and APE operating points. Signed-off-by: Martin Persson <martin.persson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-08ux500: remove ambiguous irq macrosRabin Vincent
Remove the irq number macros which don't specify which SoC they're for. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-08ux500: rework gpio registrationRabin Vincent
Rework gpio registration to remove build-time changing macros. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-08ux500: fix uncompressor UART address for U5500Carl-Johan Irekvist
The uncompress code for zImage uses the UART to print status messages, this was hard coded to use UART2 for the U8500 platform. This patch checks at run time which platform it is run on. U5500 uses UART0 as console UART. Signed-off-by: Carl-Johan Irekvist <carl-johan.irekvist@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-08ux500: Add DMA support for U5500Per Forlin
Add basic DMA configuration for u5500 supporting memcpy. Make way for SDI0 dma support by setting SDI0 to -1, indicating it will be configured in runtime. Signed-off-by: Per Forlin <per.forlin@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-08ux500: Add eMMC support in U5500.Per Forlin
U5500 now boots from sdi0 (onboard eMMC). Change machine type to U5500. Adjust uart and sdi0 clock rates for u5500. All necessary clocks must be enabled before Linux starts because there is no clock tree support in u5500 yet. Signed-off-by: Per Forlin <per.forlin@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-08mach-ux500: AB8500 irqs is taken from header fileMattias Wallin
This patch removes the dublicated define for number of interrupts and instead include the needed header file. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-08ARM: ux500: prcmu db8500 v2 supportMattias Wallin
This patch adds support for db8500 chip version 2. The TCDM memory address of the PRCMU is changed and dynamic detection of that is added. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-08ux500: rework device registrationRabin Vincent
Change the Ux500 devices to be dynamically allocated and added by calling functions instead of referencing structures, thereby allowing 5500 and other derivatives' support to be added without having to duplicate structures, use fixup functions, or use compile-time macros. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-08ux500: mop500: add TC35892 and MicroSD slot supportRabin Vincent
Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-07ARM: 6479/1: Use shared GIC entry macros on UX500Magnus Damm
Use the GIC demux code in asm/hardware/entry-macro-gic.S on the UX500 subarchitecture. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-03ARM: SMP: pass an ipi number to smp_cross_call()Russell King
This allows us to use smp_cross_call() to trigger a number of different software generated interrupts, rather than combining them all on one SGI. Recover the SGI number via do_IPI. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (75 commits) Input: wacom - specify Cinitq supported tools Input: ab8500-ponkey - fix IRQ freeing in error path Input: adp5588-keys - use more obvious i2c_device_id name string Input: ad7877 - switch to using threaded IRQ Input: ad7877 - use attribute group to control visibility of attributes Input: serio - add support for PS2Mult multiplexer protocol Input: wacom - properly enable runtime PM Input: ad7877 - filter events where pressure is beyond the maximum Input: ad7877 - implement EV_KEY:BTN_TOUCH reporting Input: ad7877 - implement specified chip select behavior Input: hp680_ts_input - use cancel_delayed_work_sync() Input: mousedev - correct lockdep annotation Input: ads7846 - switch to using threaded IRQ Input: serio - support multiple child devices per single parent Input: synaptics - simplify pass-through port handling Input: add ROHM BU21013 touch panel controller support Input: omap4-keypad - wake-up on events & long presses Input: omap4-keypad - fix interrupt line configuration Input: omap4-keypad - SYSCONFIG register configuration Input: omap4-keypad - use platform device helpers ...
2010-10-20arm: return both physical and virtual addresses from addruartJeremy Kerr
Rather than checking the MMU status in every instance of addruart, do it once in kernel/debug.S, and change the existing addruart macros to return both physical and virtual addresses. The main debug code can then select the appropriate address to use. This will also allow us to retreive the address of a uart for the MMU state that we're not current in. Updated with fixes for OMAP from Jason Wang <jason77.wang@gmail.com> and Tony Lindgren <tony@atomide.com>, and fix for versatile express from Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-10-18Merge branches 'at91', 'dcache', 'ftrace', 'hwbpt', 'misc', 'mmci', 's3c', ↵Russell King
'st-ux' and 'unwind' into devel
2010-10-13ux500 - add platform data for Nomadik SKE keypad controllerSundar Iyer
Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-04ARM: Provide common header for hard_smp_processor_id()Russell King
Provide a common header to read the SMP CPU number from the MPIDR. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-04ARM: 6415/1: ux500: DB5500 mailbox driverLinus Walleij
This is a driver for the mailboxes used to communicate with the DB5500 modem portions. Signed-off-by: Stefan Nilsson XK <stefan.xk.nilsson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-04ARM: 6413/1: ux500: resources for DB5500 mbox driver and modem irq handlerLinus Walleij
Platform resources found in the DB5500 for mailboxes and the modem IRQ controller. Signed-off-by: Stefan Nilsson XK <stefan.xk.nilsson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-19ARM: 6337/2: AB8500 I2C platform configuration and irqLinus Walleij
This patch adds the platform part of the AB8500 PRCMU I2C access driver. The old irq name AB4500 is changed to AB8500. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-02ARM: 6336/1: U8500 PRCMU driverLinus Walleij
Add an initial driver for communicating with the Power, Reset and Clock Management Unit (PRCMU) firmware in U8500. This initial version supports AB8500 communication only. Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com> Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-02ARM: 6334/1: ux500: add DB8500 SD/MMC platform devicesHanumath Prasad
Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Hanumath Prasad <hanumath.prasad@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-02ARM: 6331/1: ux500 cpu/SoC version macros v2Linus Walleij
This patch adds support for checking if the digital baseband (DB) System-on-Chip (aka "cpu) ASIC hardware version is 1.0, 1.1 or 2.0. We print the result in the bootlog, the functions are then used for runtime decisions based on hardware version. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-20 06:22:14 +0000