aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-s5pv210
AgeCommit message (Collapse)Author
2011-01-18ARM: S5PV210: Add missing virtual ASoC DMA deviceJassi Brar
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-15Merge branch 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm: (161 commits) ARM: pxa: fix building issue of missing physmap.h ARM: mmp: PXA910 drive strength FAST using wrong value ARM: mmp: MMP2 drive strength FAST using wrong value ARM: pxa: fix recursive calls in pxa_low_gpio_chip AT91: Support for gsia18s board AT91: Acme Systems FOX Board G20 board files AT91: board-sam9m10g45ek.c: Remove duplicate inclusion of mach/hardware.h ARM: pxa: fix suspend/resume array index miscalculation ARM: pxa: use cpu_has_ipr() consistently in irq.c ARM: pxa: remove unused variable in clock-pxa3xx.c ARM: pxa: fix warning in zeus.c ARM: sa1111: fix typo in sa1111_retrigger_lowirq() ARM mxs: clkdev related compile fixes ARM i.MX mx31_3ds: Fix MC13783 regulator names ARM: plat-stmp3xxx: irq_data conversion. ARM: plat-spear: irq_data conversion. ARM: plat-orion: irq_data conversion. ARM: plat-omap: irq_data conversion. ARM: plat-nomadik: irq_data conversion. ARM: plat-mxc: irq_data conversion. ... Fix up trivial conflict in arch/arm/plat-omap/gpio.c (Lennert Buytenhek's irq_data conversion clashing with some omap irq updates)
2011-01-13Merge branch 'topic/asoc' into for-linusTakashi Iwai
2011-01-05Merge branch 'dev/cleanup-clocks' into for-nextKukjin Kim
2011-01-04ARM: S5PV210: Tidy init+disable clock usage and s3c24xx_register_clocks cleanupKukjin Kim
This patch changes the clock registration code to use the s3c_register_clocks() followed by s3c_disable_clocks() instead of the loops it was using and cleanups the return of s3c24xx_register_clocks() because it includes it. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30Merge branch 'next-s5pv210' into for-next-newKukjin Kim
Conflicts: arch/arm/mach-s5pv210/mach-smdkv210.c
2010-12-30Merge branch 'next-s5p' into for-next-newKukjin Kim
2010-12-30ARM: S5PV210: Add resource definitions for MIPI CSISSylwester Nawrocki
Naming changed for consistency with s5pv310 where there are two instances of the device. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: S5PV210: Add DM9000 support on SMDKV210Thomas Abraham
This patch adds DM9000 Ethernet Controller device support for SMDKV210. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: S5PV210: Add SROM controller clockThomas Abraham
This patch adds the SROM controller clock to the list of clocks to be enabled at boot time. It is required to be enabled at boot time since the modules connected over the SROM interface such as the Ethernet controller need an operational SROM. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: S5P: Move SROM controller IO mapping to plat-s5p for S5P SoCsThomas Abraham
This patch modifies the following. 1. Moves the SROM controller mapping from S5PV210 specific code to S5P common code. The SROM controller mapping can be used for all S5P SoCs. 2. Define the SROM controller physical address for S5P64X0, S5P6442, S5PC100, S5PV210 and S5PV310. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: S5PV210: Add frame buffer display support for SMDKV210Thomas Abraham
Enable frame buffer display support for SMDKV210 board. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Reviewed-by: Jonghun Han <jonghun.han@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: S5PV210: Enable I2S device to work on SMDKV210Jassi Brar
Add missing virtual ASoC DMA device and WM8580 as I2C slave, so that the I2S can work on SMDKV210. [kgene.kim@samsung.com: removed virtual ASoC DMA device to avoid build error and it will be added next time] Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30ARM: S5PV210: Enable I2S device to work on SMDKC110Jassi Brar
Add missing virtual ASoC DMA device and WM8580 as I2C slave, so that the I2S can work on SMDKC110. [kgene.kim@samsung.com: removed virtual ASoC DMA device to avoid build error and it will be added next time] Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> [kgene.kim@samsung.com: minor changed title] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-22Merge branch 'next-samsung-asoc' into next-samsung-asoc2Kukjin Kim
2010-12-17ARM: S5PV210: update MAX8998 platform data to get rid of WARN()Marek Szyprowski
This patch adds new entries required by the new version of MAX8998 driver. Without them, the driver fails to init. See commit 50f19a4596 Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-13Merge branch 'topic/workq-update' into topic/asocTakashi Iwai
Conflicts: sound/soc/codecs/wm8350.c sound/soc/codecs/wm8753.c sound/soc/sh/fsi.c sound/soc/soc-core.c
2010-11-25ARM: S5PV210: Fix sysdev related warning messagesAbhilash Kesavan
This patch fixes following warning messages when CONFIG_PM selected. In file included from arch/arm/mach-s5pv210/mach-smdkv210.c:34: arch/arm/plat-samsung/include/plat/pm.h:104: warning: 'struct sys_device' declared inside parameter list arch/arm/plat-samsung/include/plat/pm.h:104: warning: its scope is only this definition or declaration, which is probably not what you want arch/arm/plat-samsung/include/plat/pm.h:105: warning: 'struct sys_device' declared inside parameter list In file included from arch/arm/mach-s5pv210/mach-smdkc110.c:31: arch/arm/plat-samsung/include/plat/pm.h:104: warning: 'struct sys_device' declared inside parameter list arch/arm/plat-samsung/include/plat/pm.h:104: warning: its scope is only this definition or declaration, which is probably not what you want arch/arm/plat-samsung/include/plat/pm.h:105: warning: 'struct sys_device' declared inside parameter list Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-11-23ASoC: Samsung: Rename AC97 platform deviceJassi Brar
Call the AC97 controller devices found in S3C, S5P and newer SoCs as 'samsung-ac97' rather than 's3c-ac97'. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-19ARM: S5PV210: Upgrade platform device for I2SJassi Brar
Add more information to I2S platform_devices in order to prepare them for new controller driver. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-11-19ARM: SAMSUNG: Rename s3c64xx I2S platform deviceJassi Brar
Since the I2S of S3C64XX and newer SoCs are incremental versions of each other with changes managable in a single driver, rename the 's3c64xx-iis' -> 'samsung-i2s' Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-28Merge branch 'for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into devel-stable Conflicts: arch/arm/mach-s3c64xx/dev-audio.c
2010-10-25ARM: S5P: Change VMALLOC_END to use more vmalloc()/ioremap() areaKukjin Kim
This patch changes VMALLOC_END from 0xE0000000 to 0xF6000000, because some systems want to use more vmalloc()/ioremap() area and now don't use from at 0xE0000000 to 0xF6000000 (the start of Samsung SoCs' VA space) Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25ARM: S5P: Reorder DMA platform device idSeungwhan Youn
This patch is matched-up DMA platform device id to its clock id. Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25ARM: S5PV210: Add DMA operation clockSeungwhan Youn
This patch adds DMA operation clock which is disabled as default. Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25ARM: S5PV210: Add voltage consumer of WM8994 to the regulator frameworkChanwoo Choi
This patch add cose related to regulator. To control powre consumeption have registered the voltage consumer of WM8994 to the regulator framework. Additionally, I explain the constraints of the regulator of WM8994 codec. All these consumer supply of WM8994 codec connected the regulator(VCC_1.8V) on a circuit diagram. "VCC_1.8V" regulator is always enabled, because it is used to many devices on Goni/Aquila board. This is required especially when there are many devices physically attached to "VCC_1.8V" and some of they did not "register" as consumers to "VCC_1.8V". "VCC_1.8V" might be turned off by those who are registered while "unregistered" are still active Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25ARM: S5PV210: Add init code of audio to Goni and Auqila boardChanwoo Choi
This patch add initialization code of audio and I2S platform drivers to Goni and Aquila board. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25ARM: S5PV210: Add i2c information to Goni and Aquila boardChanwoo Choi
This patch the I2C board information for the WM8994 used in the Goni/Aquila as audio codec and adds the I2C platform drivers. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25ARM: S5P: Add EPLL rate change warningSeungwhan Youn
This patch adds warning about changing EPLL rate to notice that other driver that controls H/W, which is using EPLL, will has unknown effects by this EPLL rate change. Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25ARM: S5PV210: Add EPLL clock operationsSeungwhan Youn
This patch adds EPLL specific clock get_rate/set_rate operations on S5PV210. Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25ARM: S5PV210: Fix wrong EPLL rate getting on setup clocksSeungwhan Youn
This patch fix wrong EPLL getting on setup clocks on S5PV210. Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25ARM: S5PV210: Add audio clocks as sysclkSeungwhan Youn
This patch adds audio clocks(SCLK_AUDIO{0,1,2} and SCLK_AUDIO) to be initial as a sysclk on boot-time. Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25ARM: S5PV210: Add SCLK_SPDIF clockSeungwhan Youn
This patch add SCLK_SPDIF clock to support source clock of S/PDIF on S5PV210. Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25ARM: S5PV210: Add S/PDIF platform deviceSeungwhan Youn
This patch add S/PDIF platform device to support S/PDIF PCM audio on S5PV210. Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25ARM: S5PV210: Update Kconfig and Makefile for supporting CPUFREQ driverJaecheol Lee
This patch adds ARCH_HAS_CPUFREQ in arch/arm/Kconfig for S5PV210, and updates mach-s5pv210/Makefile for supporting build CPUFREQ driver. Signed-off-by: Jaecheol Lee <jc.lee@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25ARM: S5PV210: Add support CPUFREQJaecheol Lee
This patch adds CPUFREQ driver for supporting DFS(Dynamic Frequency Scaling). Signed-off-by: Jaecheol Lee <jc.lee@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25ARM: S5PV210: Add Register definition for CMUJaecheol Lee
This patch adds some CMU(Clock Management Unit) registers for supporting CPUFREQ and some drivers. Signed-off-by: Jaecheol Lee <jc.lee@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25ARM: S5PV210: Add MOUT_DMC0 and SCLK_DMC0 clocksJaecheol Lee
This patch adds MOUT_DMC0 and SCLK_DMC0 for checking the dmc0 clock in CPUFREQ driver. Signed-off-by: Jaecheol Lee <jc.lee@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25ARM: S5PV210: Add struct clk_ops for clk_fout_apllJaecheol Lee
Current fout_apll has fixed rate value. So CPUFREQ driver gets incorrect value when finding current CPU frequency. Because some operation level need to change APLL. Added get_rate function for fout_apll can give correct frequency value when calling get_rate function. Signed-off-by: Jaecheol Lee <jc.lee@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25ARM: S5PV210: Fix wrong interrupt I2C2 and I2C3 numberKyungmin Park
The name of the I2C2 and I2C3 interrupt should be IIC2 and IIC3 instead of CAN0 and CAN1. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25Merge branch 'next-gpio-update' into for-nextKukjin Kim
2010-10-23ARM: S5PV210: 2nd Change to using s3c_gpio_cfgrange_nopull()Kukjin Kim
This patch changes code setting special-function and no pull-up to use the s3c_gpio_cfgrange_nopull() wrapper. NOTE: This is for missed things from the previous patch. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S5PV210: Change to using s3c_gpio_cfgrange_nopull()Ben Dooks
Change code setting special-function and no pull-up to use the s3c_gpio_cfgrange_nopull() wrapper. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S5PV210: 2nd Change to using s3c_gpio_cfgall_range()Kukjin Kim
This patch changes the code setting range of GPIO pins' configuration and pull state to use the recently introduced s3c_gpio_cfgpin_range(). NOTE: This is for missed things from the previous patch. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S5PV210: Change to using s3c_gpio_cfgall_range()Ben Dooks
Change the code setting a range of GPIO pins' configuration and pull state to use the recently introduced s3c_gpio_cfgall_range(). Mop up a few missed s3c_gpio_cfgpin_range() changes. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S5PV210: Change to using s3c_gpio_cfgpin_range()Ben Dooks
Change the code setting ranges of GPIO pins using s3c_gpio_cfgpin() to use the recently introduced s3c_gpio_cfgpin_range(). Signed-off-by: Ben Dooks <ben-linux@fluff.org> [kgene.kim@samsung.com: coding-style fixes] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21ARM: S5PV210: GONI: Add support for QT602240 TS driverMarek Szyprowski
Add required platform definitions for QT602240 touchscreen on I2C2 bus. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21ARM: S5PV210: Add si470x radio device to the GONI boardMarek Szyprowski
Add required platform definitions for si470x radio device on Samsung Goni board. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> [kgene.kim@samsung.com: minor title fixes] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21ARM: S5PV210: Add support for S6E63M0 LCD controller on GONI boardMarek Szyprowski
Add required platform definitions for S6E63M0 LCD controller on Samsung Goni board. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [kgene.kim@samsung.com: minor title fixes] [kgene.kim@samsung.com: fix build error] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21ARM: S5PV210: Add Power Management SupportJongpill Lee
This patch adds suspend-to-ram support for S5PV210. Note. This patch is confirmed on SMDKV210 and SMDKC110 board. Signed-off-by: Jongpill Lee <boyko.lee@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-03 02:51:59 +0000