aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-pxa
AgeCommit message (Collapse)Author
2011-01-03ARM: pxa: fix page table corruption on resumeAric D. Blumer
Before this patch, the following error would sometimes occur after a resume on pxa3xx: /path/to/mm/memory.c:144: bad pmd 8040542e. The problem was that a temporary page table mapping was being improperly restored. The PXA3xx resume code creates a temporary mapping of resume_turn_on_mmu to avoid a prefetch abort. The pxa3xx_resume_after_mmu code requires that the r1 register holding the address of this mapping not be modified, however, resume_turn_on_mmu does modify it. It is mostly correct in that r1 receives the base table address, but it may also get other bits in 13:0. This results in pxa3xx_resume_after_mmu restoring the original mapping to the wrong place, corrupting memory and leaving the temporary mapping in place. Signed-off-by: Matt Reimer <mreimer@sdgsystems.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-01-03ARM: pxa: PXA_ESERIES depends on FB_W100.Lennert Buytenhek
As arch/arm/mach-pxa/eseries.c references w100fb_gpio_{read,write}() directly. Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-11-30ARM: pxa/palm: fix ifdef around gen_nand driver registrationMarek Vasut
Reported-by: Rafael Gandolfi <kaillasse91@hotmail.fr> Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-11-03ARM: pxa/saar: fix the building failure caused by typoEric Miao
Signed-off-by: Eric Miao <eric.y.miao@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@marvell.com>
2010-11-03ARM: pxa/cm-x2xx: remove duplicate call to pxa27x_init_irqMike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-10-28Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (505 commits) [media] af9015: Fix max I2C message size when used with tda18271 [media] IR: initialize ir_raw_event in few more drivers [media] Guard a divide in v4l1 compat layer [media] imon: fix nomouse modprobe option [media] imon: remove redundant change_protocol call [media] imon: fix my egregious brown paper bag w/rdev/idev split [media] cafe_ccic: Configure ov7670 correctly [media] ov7670: allow configuration of image size, clock speed, and I/O method [media] af9015: support for DigitalNow TinyTwin v3 [1f4d:9016] [media] af9015: map DigitalNow TinyTwin v2 remote [media] DigitalNow TinyTwin remote controller [media] af9015: RC fixes and improvements videodev2.h.xml: Update to reflect the latest changes at videodev2.h [media] v4l: document new Bayer and monochrome pixel formats [media] DocBook/v4l: Add missing formats used on gspca cpia1 and sn9c2028 [media] firedtv: add parameter to fake ca_system_ids in CA_INFO [media] tm6000: fix a macro coding style issue tm6000: Remove some ugly debug code [media] Nova-S-Plus audio line input [media] [RFC,1/1] V4L2: Use new CAP bits in existing RDS capable drivers ...
2010-10-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (365 commits) ALSA: hda - Disable sticky PCM stream assignment for AD codecs ALSA: usb - Creative USB X-Fi volume knob support ALSA: ca0106: Use card specific dac id for mute controls. ALSA: ca0106: Allow different sound cards to use different SPI channel mappings. ALSA: ca0106: Create a nice spot for mapping channels to dacs. ALSA: ca0106: Move enabling of front dac out of hardcoded setup sequence. ALSA: ca0106: Pull out dac powering routine into separate function. ALSA: ca0106 - add Sound Blaster 5.1vx info. ASoC: tlv320dac33: Use usleep_range for delays ALSA: usb-audio: add Novation Launchpad support ALSA: hda - Add workarounds for CT-IBG controllers ALSA: hda - Fix wrong TLV mute bit for STAC/IDT codecs ASoC: tpa6130a2: Error handling for broken chip ASoC: max98088: Staticise m98088_eq_band ASoC: soc-core: Fix codec->name memory leak ALSA: hda - Apply ideapad quirk to Acer laptops with Cxt5066 ALSA: hda - Add some workarounds for Creative IBG ALSA: hda - Fix wrong SPDIF NID assignment for CA0110 ALSA: hda - Fix codec rename rules for ALC662-compatible codecs ALSA: hda - Add alc_init_jacks() call to other codecs ...
2010-10-25Merge branch 'topic/asoc' into for-linusTakashi Iwai
Conflicts: arch/powerpc/platforms/85xx/p1022_ds.c
2010-10-22[media] soc_camera: Don't use module names to load I2C modulesLaurent Pinchart
With the v4l2_i2c_new_subdev* functions now supporting loading modules based on modaliases, remove the module names hardcoded in platform data and pass a NULL module name to those functions. All corresponding I2C modules have been checked, and all of them include a module aliases table with names corresponding to what the soc_camera platform data uses. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-20arm: remove machine_desc.io_pg_offst and .phys_ioNicolas Pitre
Since we're now using addruart to establish the debug mapping, we can remove the io_pg_offst and phys_io members of struct machine_desc. The various declarations were removed using the following script: grep -rl MACHINE_START arch/arm | xargs \ sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }' [ Initial patch was from Jeremy Kerr, example script from Russell King ] Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Eric Miao <eric.miao at canonical.com>
2010-10-20arm: return both physical and virtual addresses from addruartJeremy Kerr
Rather than checking the MMU status in every instance of addruart, do it once in kernel/debug.S, and change the existing addruart macros to return both physical and virtual addresses. The main debug code can then select the appropriate address to use. This will also allow us to retreive the address of a uart for the MMU state that we're not current in. Updated with fixes for OMAP from Jason Wang <jason77.wang@gmail.com> and Tony Lindgren <tony@atomide.com>, and fix for versatile express from Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-10-09ARM: pxa/balloon3: Disperse MFP configMarek Vasut
Move pin config to appropriate places and use it only if needed. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-By: Jonathan McDowell <noodles@earth.li> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-10-09ARM: pxa: reduce the scope of get_memclk_frequency_10khz()Haojian Zhuang
Up to now, only pxa2xx pcmcia driver is using the API. No other device driver is using this API in PXA3xx or any other PXA silicons. Restrict the scope only on pxa2xx and remove the implementation of pxa3xx. So we can avoid oo much checking on cpuid after more pxa chips supported. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Cc: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-10-09ARM: pxa: reduce the scope of get_clk_frequency_khz()Haojian Zhuang
get_clk_frequency_khz() is used in private cpufreq driver. In order to meet the change of different pxa silicons, checking cpuid is introduced in get_clk_frequency_khz(). While more pxa silicons are supported, the workload of checking cpuid is higher. So restrict the scope of get_clk_frequency_khz() on pxa2xx. Different pxa silcions use different private cpufreq driver to avoid too much checking on cpuid. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Cc: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-10-09ARM: pxa: append tavorevb3 supportHaojian Zhuang
Bringup tavorevb3 development platform. UART and PMIC are enabled. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-10-09ARM: pxa: moved pxa27x_keypad.h to platform pxa directoryMark F. Brown
mach-mmp utilizes pxa27x_keypad code so we need to move header to platform pxa directory. Signed-off-by: Mark F. Brown <mark.brown314@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-10-08ARM: pxa: fix pxa3xx-u2d crash when ULPI not usedMarek Vasut
In case the pxa3xx-u2d driver isn't used, probing of ohci-pxa27x will cause an ugly kernel crash (NULL pointer dereference in pxa3xx_u2d_start_hc(), because struct u2d is NULL and clk_enable() call will crash the kernel, trying to access it). Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-10-08ARM: pxa: encode IRQ number into .nr_irqsHaojian Zhuang
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-10-08ARM: pxa/cm-x300: enable USB host port2Igor Grinberg
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-10-08ARM: pxa: add U2D controller and ULPI driver for pxa3xxIgor Grinberg
USB2.0 Device Controller (U2DC) which is found in Marvell PXA3xx. U2DC supports both High and Full speed modes. PXA320 and PXA300 U2DC supports only UTMI interface. PXA310 U2DC supports only ULPI interface and has the OTG capability. U2D Controller ULPI driver introduced in this patch supports only the PXA310 USB Host via the ULPI. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-09-27Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: (28 commits) ARM: 6411/1: vexpress: set RAM latencies to 1 cycle for PL310 on ct-ca9x4 tile ARM: 6409/1: davinci: map sram using MT_MEMORY_NONCACHED instead of MT_DEVICE ARM: 6408/1: omap: Map only available sram memory ARM: 6407/1: mmu: Setup MT_MEMORY and MT_MEMORY_NONCACHED L1 entries ARM: pxa: remove pr_<level> uses of KERN_<level> ARM: pxa168fb: clear enable bit when not active ARM: pxa: fix cpu_is_pxa*() not expanding to zero when not configured ARM: pxa168: fix corrected reset vector ARM: pxa: Use PIO for PI2C communication on Palm27x ARM: pxa: Fix Vpac270 gpio_power for MMC ARM: 6401/1: plug a race in the alignment trap handler ARM: 6406/1: at91sam9g45: fix i2c bus speed leds: leds-ns2: fix locking ARM: dove: fix __io() definition to use bus based offset dmaengine: fix interrupt clearing for mv_xor ARM: kirkwood: Unbreak PCIe I/O port ARM: Fix build error when using KCONFIG_CONFIG ARM: 6383/1: Implement phys_mem_access_prot() to avoid attributes aliasing ARM: 6400/1: at91: fix arch_gettimeoffset fallout ARM: 6398/1: add proc info for ARM11MPCore/Cortex-A9 from ARM ...
2010-09-25ARM: pxa: remove pr_<level> uses of KERN_<level>Joe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-09-25ARM: pxa: fix cpu_is_pxa*() not expanding to zero when not configuredEric Miao
When CONFIG_PXA3xx is not selected, cpu_is_pxa3xx() doesn't expand to zero, which in some places doesn't result in correct optimization. Signed-off-by: Eric Miao <eric.y.miao@gmail.com> Reported-and-tested-by: Marek Vasut <marek.vasut@gmail.com>
2010-09-25ARM: pxa: Use PIO for PI2C communication on Palm27xMarek Vasut
Original idea by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-09-25ARM: pxa: Fix Vpac270 gpio_power for MMCMarek Vasut
GPIO 0 is valid, yet this platform doesn't have any power GPIO for MMC. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-09-22arm: fix "arm: fix pci_set_consistent_dma_mask for dmabounce devices"FUJITA Tomonori
This fixes the regression caused by the commit 6fee48cd330c68 ("dma-mapping: arm: use generic pci_set_dma_mask and pci_set_consistent_dma_mask"). ARM needs to clip the dma coherent mask for dmabounce devices. This restores the old trick. Note that strictly speaking, the DMA API doesn't allow architectures to do such but I'm not sure it's worth adding the new API to set the dma mask that allows architectures to clip it. Reported-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-30ARM: pxa: fix CI_HSYNC and CI_VSYNC MFP defines for pxa300Axel Lin
According to PXA3xx Processor Family Developer Manuall Vol1. section "Pin Descriptions and Control", PXA30x and PXA31x Processor Alternate Function Table shows the Alt FN 0 for GPIO51 is CI_HSYNC and for GPIO52 is CI_VSYNC. This patch fixes the MFP defines and also corrects the order of MFD defines. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-30ARM: pxa: remove __init from cpufreq_driver->init()Eric Miao
This is causing section mismatches when linking, as cpufreq_driver->init() is not supposed to be in init section. Reported-by: Tomáš 'Sleep_Walker' Čech <sleep_walker@suse.cz> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-16Merge branch 'for-2.6.36' into for-2.6.37Mark Brown
Fairly simple conflicts, the most serious ones are the i.MX ones which I suspect now need another rename. Conflicts: arch/arm/mach-mx2/clock_imx27.c arch/arm/mach-mx2/devices.c arch/arm/mach-omap2/board-rx51-peripherals.c arch/arm/mach-omap2/board-zoom2.c sound/soc/fsl/mpc5200_dma.c sound/soc/fsl/mpc5200_dma.h sound/soc/fsl/mpc8610_hpcd.c sound/soc/pxa/spitz.c
2010-08-12ASoC: multi-component - ASoC Multi-Component SupportLiam Girdwood
This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-09Merge branch 'devel-stable' into develRussell King
2010-08-06Merge branch 'devel' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel-stable Conflicts: arch/arm/mach-pxa/palmt5.c arch/arm/mach-pxa/palmtreo.c
2010-08-05ARM: 6283/1: Remove useless PCIO_BASE definitionseric miao
Signed-off-by: Eric Miao <eric.miao@canonical.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-05[ARM] pxa/cm-x300: fix ffuart registrationIgor Grinberg
ffuart is available on cm-x300 only with pxa300. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Cc: stable <stable@kernel.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05[ARM] pxa/balloon3: Add MAX1586 PMIC supportMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-08-05[ARM] pxa/balloon3: Add NAND driverMarek Vasut
The NAND support is implemented through the gen_nand driver. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-08-05[ARM] pxa/balloon3: PCF857x GPIO expander and LEDsMarek Vasut
Add supported for PCF8574A GPIO expander and LEDs attached to it. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-08-05[ARM] pxa/balloon3: PCMCIA SupportMarek Vasut
This driver adds support for the on-board CF socket. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-08-05[ARM] pxa/balloon3: Machine file cleanupMarek Vasut
Modularize components of the Balloon3 board. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-08-05[ARM] pxa/balloon3: Machine file cleanupMarek Vasut
Logically separate parts of the file that are handled by one particular driver. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-08-05[ARM] pxa/z2: Fix flash layout typoMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-08-05[ARM] pxa/spitz: Formating and naming fixesMarek Vasut
Improve formating so checkpatch passes. Also, change some function and variable names to make the naming consistent. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-08-05[ARM] pxa/spitz: Rework spitzMarek Vasut
This huge patch mostly shuffles code. The spitz.c file contained terrible mess and needed a cleanup, here it is: 1) Made every part modular, components are not built in if not selected. 2) Removed loads of preprocessor goo, mostly "#ifdef MACH_AKITA .... #endif" and similar code. The kernel size will grow by a few kb now, but the file is much more readable. 3) Reworked SD/CF power setting function and made it reentrant. 4) Add ISL6271A regulator support 5) Correctly register WM8750 Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-08-05[ARM] pxa/palm: Flip Palm LD,TX,T5,Z72 to Palm27xMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-08-05[ARM] pxa/palm: Introduce Palm27xMarek Vasut
This contains common code for Palm LD, TX, T5, Z72, Treo680, Centro This code also adds PMIC support for all the devices, Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-08-05[ARM] pxa: removed mostly unused and confusing two sharpsl.hEric Miao
Only a small part of used code is moved into sharpsl_pm.h. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05[ARM] pxa: use generic gpio_get_value() instead of READ_GPIO_BIT()Eric Miao
READ_GPIO_BIT() is no way generic by accessing GPIO registers directly, replace it with gpio_get_value(). Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05[ARM] pxa/corgi: remove unused declarations of corgiscoop_deviceEric Miao
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05[ARM] pxa/spitz: remove unused declarationsEric Miao
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05[ARM] pxa: removing dead IDE_PXA_CFChristoph Egger
IDE_PXA_CF doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by: Christoph Egger <siccegge@cs.fau.de> Acked-by: Juergen Schindele <schindele@nentec.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-17 20:00:24 +0000