aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-pxa/Makefile
AgeCommit message (Collapse)Author
2010-12-20ARM: pxa: Rename Colibri evalboardMarek Vasut
Rename colibri-pxa270-evalboard to colibri-evalboard as this board is used with all Colibri modules. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-12-18ARM: pxa: support saarb platformHaojian Zhuang
Saarb platform is a handheld platform that supports Marvell PXA955 silicon. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-12-18ARM: pxa: support pxa95xHaojian Zhuang
The core of PXA955 is PJ4. Add new PJ4 support. And add new macro CONFIG_PXA95x. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-12-16ARM: pxa: separate the clock support into clock-{pxa2xx,pxa3xx}.cEric Miao
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-10-09ARM: pxa: append tavorevb3 supportHaojian Zhuang
Bringup tavorevb3 development platform. UART and PMIC are enabled. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-10-08ARM: pxa: add U2D controller and ULPI driver for pxa3xxIgor Grinberg
USB2.0 Device Controller (U2DC) which is found in Marvell PXA3xx. U2DC supports both High and Full speed modes. PXA320 and PXA300 U2DC supports only UTMI interface. PXA310 U2DC supports only ULPI interface and has the OTG capability. U2D Controller ULPI driver introduced in this patch supports only the PXA310 USB Host via the ULPI. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05[ARM] pxa/palm: Introduce Palm27xMarek Vasut
This contains common code for Palm LD, TX, T5, Z72, Treo680, Centro This code also adds PMIC support for all the devices, Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-08-05[ARM] pxa: merge all eseries board code into eseries.cEric Miao
Cc: Ian Molton <spyro@f2s.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05[ARM] pxa: merge stargate2 and imote2 board filesJonathan Cameron
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-06-18[ARM] pxa/income: Add Income SBC supportMarek Vasut
This is support for custom design based on Toradex Colibri PXA270 CPU card. Initial patch was by Pavel Revak. [daniel - rebased the code to follow the module/board split] Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Pavel Revak <palo@bielyvlk.sk> Cc: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-06-18[ARM] pxa/colibri270: Split module and base board codeDaniel Mack
Follow the idea of several MX31 based boards and split code that is related to the module from code that is baseboard specific. This makes adding new base board support easier, while avoiding code duplication. Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11[ARM] pxa: add basic support for Voipac PXA270 SBCMarek
This patch adds basic support for the Voipac PXA270 SBC. The device consists of the following hardware: - PXA270 @ 520 MHz - 256MB RAM (sparsemem, 2*128MB regions) - 64MB NOR flash - 640x480 LCD - Ports: 2xUHC, 1xUDC, 1xPCMCIA, VGA, FFUART, 2xPS2, Speaker, MIC Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11[ARM] pxa: add basic support for the Aeronix Zipit Z2 handheldMarek Vasut
This patch adds support for the Zipit Z2. The parts missing from this patch are the battery support, SPI driver for the LCD and support for the Silicon Serial ID chip. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11[ARM] pxa: move ssp into common plat-pxaHaojian Zhuang
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11[ARM] pxa: remove now un-used corgi_ssp.c and corgi_lcd.cEric Miao
The only use of corgi_ssp.c is corgi_ts.c, which is now deprecated and removed. Remove corgi_ssp.c and corgi_lcd.c and their relevant function declarations and data structures. Signed-off-by: Eric Miao <eric.y.miao@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Pavel Machek <pavel@ucw.cz>
2010-03-02[ARM] pxa: add support for Embedian MXM-8x10Edwin Peer
Signed-off-by: Edwin Peer <epeer@tmtservices.co.za> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-18[ARM] pxa/raumfeld: add platform supportDaniel Mack
This adds support for Raumfeld's 'Controller', 'Connector', 'Speaker S' and 'Speaker M' devices. They're all based on PXA303 SoCs. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-13[ARM] pxa/zeus: basic support for Arcom Zeus SBCMarc Zyngier
Signed-off-by: Marc Zyngier <maz@misterjones.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa: introduce CONFIG_MACH_ZYLONITE{300,320} for CPU_PXA* removingEric Miao
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa: re-order platforms in Kconfig and MakefileEric Miao
Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa/treo: generalisation of Treo680 codeTomáš Čech
Signed-off-by: Tomáš Čech <sleep_walker@suse.cz> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa: balloon3 (http://balloonboard.org/) base machine supportJonathan McDowell
So, again against latest pxa-linux-2.6/devel, with the following changes: * Move to __raw_readl/__raw_writel for FPGA/CPLD register access * Change Toppoly LCD config to be selectable at run time rather than compile time. * Remove currently unused irq device suspend/resume functions. * Strip out unnecessary/duplicated #includes. * Some code style cleanups. Balloon3 (http://balloonboard.org/) base machine support Signed-off-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa: add support for the IskraTel XCEP boardMatej Kenda
Added support for the Iskratel XCEP single board computer, embedded in instruments used in particle accelerators. The patch contains the platform specific code, Makefile and Kconfig changes for platform arm-pxa. Signed-off-by: Aleš Bardorfer <ales.bardorfer@i-tech.si> Signed-off-by: Michael Abbott <michael.abbott@diamond.ac.uk> Signed-off-by: Matej Kenda <matej.kenda@i-tech.si> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa: Palm Tungsten|C initial supportMarek Vasut
This patch adds basic support for Palm Tungsten|C handheld. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-06-16[ARM] pxa/treo680: initial supportTomas 'Sleep_Walker' Cech
Signed-off-by: Tomáš Čech <sleep_walker@suse.cz> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa: Stargate 2 board supportJonathan Cameron
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa: add basic support for HP iPAQ hx4700 PDAsPhilipp Zabel
This includes - IrDA (pxafixp_ir), - Buttons (gpio-keys), - ASIC3 IRQ/GPIOs (asic3), - EGPIOs (htc-egpio), - ATI Imageon w3220 framebuffer (w100fb), - Backlight (pwm-backlight), - StrataFlash (physmap), - Battery monitor (ds1wm,w1_ds2760,ds2760_battery) - USB gadget support (pxa27x_udc,gpio_vbus). - bq24022 battery charger (pda_power,bq24022) - TSC2046 touchscreen (ads7846) Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa: move pwm.c to common plat-pxa directoryEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa: build pwm.c according to HAVE_PWM instead of PXA_PWMEric Miao
The PXA_PWM config option is really redundant since the introduction of HAVE_PWM, replace that with HAVE_PWM to avoid confusion. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-04[ARM] pxa: Palm Tungsten E2 basic supportMarek Vasut
This contains support for keypad, MMC, AC97, LCD and backlight. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23[ARM] pxa: move common GPIO handling code into plat-pxaEric Miao
1. add common GPIO handling code into [arch/arm/plat-pxa] 2. common code in <mach/gpio.h> moved into <plat/gpio.h>, new processors should implement its own <mach/gpio.h>, provide the following required definitions and '#include <plat/gpio.h>' in the end: - GPIO_REGS_VIRT for mapped virtual address of the GPIO registers' physical I/O memory - macros of GPLR(), GPSR(), GPDR() for constant optimization for functions gpio_{set,get}_value() (so that bit-bang code can still have tolerable performance) - NR_BUILTIN_GPIO for the number of onchip GPIO - definitions of __gpio_is_inverted() and __gpio_is_occupied(), they can be either macros or inlined functions Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23[ARM] pxa: introduce plat-pxa for PXA common code and add DMA supportEric Miao
1. introduce folder of 'arch/arm/plat-pxa' for common code across different PXA processor families 2. initially moved DMA code into plat-pxa 3. common code in <mach/dma.h> moved into <plat/dma.h>, new processors should implement its own <mach/dma.h>, provide the following required definitions and '#include <plat/dma.h>' in the end: - DMAC_REGS_VIRT for mapped virtual address of the DMA registers' physical I/O memory Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23[ARM] pxa: Colibri PXA320 module basicsDaniel Mack
This adds basic support for Colibri PXA320 modules. The file colibri-320.c only contains settings specific to this module, such as the Ethernet interface. Cc: Matthias Meier <matthias.j.meier@gmx.net> Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23[ARM] pxa: Refactor Colibri board support codeDaniel Mack
- Move common function for all Colibri PXA3xx boards to the newly added colibri-pxa3xx.c - Drop some unnecessary defines from colibri.h - Make Kconfig reflect the fact that code for colibri 300 module does also work for the 310 model - Give up on the huge pin config table which was messed up with lots of #ifdefs and switch over to locally defined tables for configured functions Cc: Matthias Meier <matthias.j.meier@gmx.net> Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23[ARM] pxa: add basic support for Colibri PXA300 moduleDaniel Mack
This patch add basic support for Toradex' Colibri PXA300 module. Ethernet is enabled conditionally, depdending on CONFIG_AX88796. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23[ARM] pxa: rename colibri.c to colibri-pxa270.cDaniel Mack
Namespace cleanup: rename colibri.c to colibri-pxa270.c and change some names in colibri.h. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-13[ARM] pxa: add support for CSB701 baseboardDmitry Eremin-Solenikov
CSB701 is one of baseboards that can be used with CSB726 SOM. This currently adds support for button and LED on the board. More to come later. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-13[ARM] pxa: add initial support for Cogent CSB726 boardDmitry Eremin-Solenikov
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-02-10[ARM] 5355/1: Adding support for the HTC Himalaya and its framebufferZbynek Michl
Patch adds support for the HTC Himalaya device. It includes hardware definitions and w100fb support. Signed-off-by: Zbynek Michl <Zbynek.Michl@seznam.cz> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-10[ARM] 5354/1: mach-pxa: add AM300 platform driver v3Jaya Kumar
This patch adds support for the AM300 platform driver which uses the E-Ink broadsheetfb display driver. Cc: Eric Miao <eric.miao@marvell.com> Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-01-21[ARM] pxa: PalmLD initial supportMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-01-21[ARM] pxa: PalmT5 initial supportMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-17[ARM] pxa: initial support for the Imote2 platformJonathan Cameron
Changes made as suggested by Eric Miao (including fix to map_io silly mistake!). Originally designed by Intel, now sold by Crossbow (www.xbow.com). Very little actually on board. The patch includes sensors and similar as found on commonly occurring daughter boards. Some of the drivers are not in mainline as yet as they are either part of the IIO subsystem or need a lot of work before submission. What is the position wrt to putting them in i2c board configs etc? Support for these boards has been maintained outside the kernel for a long time, but now that there is a good da9030 pmic driver available the last major hurdle no longer exists. All comments welcomed. The Imote2's big brother (stargate2) will follow once any problems with this one have been cleaned up and a few bits and bobs have been added to the da903x driver. Hopefully the cc2420 driver will get cleaned up and submitted in the not too distant future as well. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-17[ARM] pxa/gumstix: fix incorrect init done by am200Jaya Kumar
Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Andre Puschmann <andre.puschmann@imms.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-02[ARM] pxa: add basic support for HP iPAQ h5000Anton Vorontsov
This patch adds HP iPAQ h5000's (h5400, h5500) basic definitions. Kernel will able to boot, work via serial console, mount filesystems placed on flashes and run USB gadgets (g_ether by default). Other device drivers (frame buffer, LCD, touchscreen, backlight, bluetooth, w1/battery, ...) are depend on SAMCOP and MediaQ SoCs/MFDs, drivers to which will be submitted too, after massive cleanups. This machine will be used as "real user" for these new drivers. This is an updated version of the patch, which contains fixes proposed on linux-arm-kernel mailing list. Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Milan Plzik <milan.plzik@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-10-21[ARM] pxa: fix the corgi_ssp.c dependency issue in {corgi,spitz}_defconfigEric Miao
Separate building of corgi_ssp.c, and introduce a new hidden config option CONFIG_CORGI_SSP_DEPRECATED for this. Aslo mark corgi_ts.c and corgi_bl.c as deprecated. This unbreaks the legacy configs in {corgi,spitz}_defconfig, however, SPI based ADS7846 touchscreen driver and a new SPI-based corgi_lcd.c driver with integrated backlight support are recommended. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-10-07[ARM] pxa: add preliminary CPUFREQ support for PXA3xxEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07[ARM] pxa: rename cpu-pxa.c to cpufreq-pxa2xx.cEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07Merge branch 'viper-for-rmk' of git://www.misterjones.org/linux-2.6-armRussell King
Merge branch 'pxa-viper' into pxa-machines Conflicts: arch/arm/mach-pxa/Makefile drivers/pcmcia/Kconfig drivers/pcmcia/Makefile
2008-10-07Merge branch 'pxa-palm' into pxa-machinesRussell King
Conflicts: drivers/mfd/Kconfig drivers/pcmcia/Makefile
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-16 10:58:39 +0000