aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-at91/at91sam9g45_devices.c
AgeCommit message (Collapse)Author
2012-04-04ARM: at91: fix check of valid GPIO for SPI and USBNicolas Ferre
SPI chip select pins have to be checked by gpio_is_valid(). The USB host overcurrent_pin checking was missing. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-04-04ARM: at91/USB host: specify and handle properly vbus_pin_active_lowNicolas Ferre
Due to an error while handling vbus_pin_active_low in ohci-at91 driver, the specification of this property was not good in devices/board files. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: stable <stable@vger.kernel.org> [3.2+]
2012-03-29Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine update from Vinod Koul: "This includes the cookie cleanup by Russell, the addition of context parameter for dmaengine APIs, more arm dmaengine driver cleanup by moving code to dmaengine, this time for imx by Javier and pl330 by Boojin along with the usual driver fixes." Fix up some fairly trivial conflicts with various other cleanups. * 'next' of git://git.infradead.org/users/vkoul/slave-dma: (67 commits) dmaengine: imx: fix the build failure on x86_64 dmaengine: i.MX: Fix merge of cookie branch. dmaengine: i.MX: Add support for interleaved transfers. dmaengine: imx-dma: use 'dev_dbg' and 'dev_warn' for messages. dmaengine: imx-dma: remove 'imx_dmav1_baseaddr' and 'dma_clk'. dmaengine: imx-dma: remove unused arg of imxdma_sg_next. dmaengine: imx-dma: remove internal structure. dmaengine: imx-dma: remove 'resbytes' field of 'internal' structure. dmaengine: imx-dma: remove 'in_use' field of 'internal' structure. dmaengine: imx-dma: remove sg member from internal structure. dmaengine: imx-dma: remove 'imxdma_setup_sg_hw' function. dmaengine: imx-dma: remove 'imxdma_config_channel_hw' function. dmaengine: imx-dma: remove 'imxdma_setup_mem2mem_hw' function. dmaengine: imx-dma: remove dma_mode member of internal structure. dmaengine: imx-dma: remove data member from internal structure. dmaengine: imx-dma: merge old dma-v1.c with imx-dma.c dmaengine: at_hdmac: add slave config operation dmaengine: add context parameter to prep_slave_sg and prep_dma_cyclic dmaengine/dma_slave: introduce inline wrappers dma: imx-sdma: Treat firmware messages as warnings instead of erros ...
2012-03-21dmaengine: at_hdmac: add slave config operationNicolas Ferre
This patch introduces DMA_SLAVE_CONFIG to at_hdmac Atmel DMA driver. It is needed to fix a regression in the use of atmel-mci.c driver on Atmel AT91 platforms brouth by e2b35f3: "dmaengine/dw_dmac: Fix dw_dmac user drivers to adapt to slave_config changes" We remove some parts of the private structure "at_dma_slave" and use the information provided by "struct dma_slave_config": source/destination peripheral registers and access width. AT_DMA_SLAVE_WIDTH_* values used previously are not needed anymore as we now use the standard ones. Although some conversion functions are needed to match register expected values. Some AT91 sub-architecture specific files are slightly touched by this patch but it cannot be split because it can break compilation. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-01ARM: at91/tc: add device tree support to atmel_tclibNicolas Ferre
Device tree support added to atmel_tclib: the generic Timer Counter library. This is used by the clocksource/clockevent driver tcb_clksrc. The current DT enabled platforms are also modified to use it: - .dtsi files are modified to add Timer Counter Block entries - alias are created to allow identification of each block - clkdev lookup tables are added for clocks identification. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2012-03-01ARM: at91/tclib: take iomem size from resourceNicolas Ferre
Requesting iomem region and ioremaping is now done using the resource size specified instead of a constant value. Each <SoC>_device.c file is modified accordingly to reflect actual user interface size. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-02-23Atmel: move console default platform_device to serial driverJean-Christophe PLAGNIOL-VILLARD
This variable spread on every SoC that is using the atmel_serial.c driver can be included directly into the latter. This will allow to compile multiple soc in the same kernel. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: kernel@avr32linux.org
2012-02-23ARM: at91/rtc-at91sam9: pass the GPBR to use via resourcesJean-Christophe PLAGNIOL-VILLARD
The GPBR registers are used for storing RTC values. The GPBR registers to use are now provided using standard resource entry. The array is filled in SoC specific code. rtc-at91sam9 RTT as RTC driver is modified to retrieve this information. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> [nicolas.ferre@atmel.com: rework resources assignment] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: Ryan Mallon <rmallon@gmail.com>
2012-02-23ARM: at91/rtc-at91sam9: each SoC can select the RTT device to useJean-Christophe PLAGNIOL-VILLARD
For the RTT as RTC driver rtc-at91sam9, the platform_device structure is filled during SoC initialization. This will allow to convert this RTC driver as a standard platform driver. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-23ARM: at91: make matrix register base soc independentJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: Ryan Mallon <rmallon@gmail.com> Cc: linux-usb@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-03ARM: at91: add Atmel ISI and ov2640 support on sam9m10g45 boardJosh Wu
This patch adds: - ov2640 sensor in at91sam9m10g45ek board - support to use PCK as ISI_MCK. PCK's parent is managed at SoC level, e.g. at91sam9g45_devices.c Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-02-03ARM: at91/dma: DMA controller registering with DT supportNicolas Ferre
Device tree support on at91sam9g45 family SoC. Only call platform_device_register() if no dma-controller node is found in device tree. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2012-02-03ARM: at91/dma: remove platform data from DMA controllerNicolas Ferre
DMA controller can deduce its configuration data from the platform. Remove the platform data and match device types with the compatible ones. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-11-29ARM: at91/soc: use gpio_is_valid to check the gpioJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-11-29Merge branch 'drivers/macb-gem-cleanup' into at91/gpioArnd Bergmann
2011-11-28ARM: at91: make rm9200 rtc drivers soc independentJean-Christophe PLAGNIOL-VILLARD
switch the rtc drivers to resource and pass it via platform_device Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-28ARM: at91: make DBGU soc independentJean-Christophe PLAGNIOL-VILLARD
we will select now the DBGU used by the soc at Kconfig level For the DEBUG_LL and early_printk this will allow to select which DBGU to use this will also allow to select them when multiple SOC are enabled Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-28ARM: at91: make watchdog drivers soc independentJean-Christophe PLAGNIOL-VILLARD
switch the watchdog drivers to resource and pass it via platform_device Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-11-28ARM: at91: make rtt register base soc independantJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-28ARM: at91: make dma register base soc independantJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-28ARM: at91: make ecc register base soc independantJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-22macb: unify at91 and avr32 platform dataJamie Iles
Both at91 and avr32 defines its own platform data structure for the macb driver and both share common structures though at91 includes a currently unused phy_irq_pin. Create a common macb_platform_data for macb that both at91 and avr32 can use. In future we can use this to support other architectures that use the same IP block with the macb driver. v2: rename eth_platform_data to macb_platform_data and allow at91_ether to share the platform data with macb. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-11-09ARM: at91: Fix USBA gadget registrationJochen Friedrich
Since 193ab2a6070039e7ee2b9b9bebea754a7c52fd1b, various AT91 boards don't register USBA adapters anymore due to depending on a now non-existing symbol. Fix the symbol name. Signed-off-by: Jochen Friedrich <jochen@scram.de> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> CC: stable@kernel.org Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-11-09ARM: at91: usart: drop static map regs for dbguJean-Christophe PLAGNIOL-VILLARD
In commit fb149f9e28354 we introduce ioremap support for static map_io, we do not need this register entry anymore. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-01Merge branch 'next/devel' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds
* 'next/devel' of git://git.linaro.org/people/arnd/arm-soc: (50 commits) ARM: tegra: update defconfig arm/tegra: Harmony: Configure PMC for low-level interrupts arm/tegra: device tree support for ventana board arm/tegra: add support for ventana pinmuxing arm/tegra: prepare Seaboard pinmux code for derived boards arm/tegra: pinmux: ioremap registers gpio/tegra: Convert to a platform device arm/tegra: Convert pinmux driver to a platform device arm/dt: Tegra: Add pinmux node to tegra20.dtsi arm/tegra: Prep boards for gpio/pinmux conversion to pdevs ARM: mx5: fix clock usage for suspend ARM i.MX entry-macro.S: remove now unused code ARM i.MX boards: use CONFIG_MULTI_IRQ_HANDLER ARM i.MX tzic: add handle_irq function ARM i.MX avic: add handle_irq function ARM: mx25: Add the missing IIM base definition ARM i.MX avic: convert to use generic irq chip mx31moboard: Add poweroff support ARM: mach-qong: Add watchdog support ARM: davinci: AM18x: Add wl1271/wlan support ... Fix up conflicts in: arch/arm/mach-at91/at91sam9g45.c arch/arm/mach-mx5/devices-imx53.h arch/arm/plat-mxc/include/mach/memory.h
2011-11-01Merge branch 'next/driver' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds
* 'next/driver' of git://git.linaro.org/people/arnd/arm-soc: hw_random: add driver for atmel true hardware random number generator ARM: at91: at91sam9g45: add trng clock and platform device MX53 Enable the AHCI SATA on MX53 SMD board MX53 Enable the AHCI SATA on MX53 LOCO board MX53 Enable the AHCI SATA on MX53 ARD board AHCI Add the AHCI SATA feature on the MX53 platforms Fix pata imx resource ARM: imx: Define functions for registering PATA ARM: imx: Add PATA clock support ARM: imx: Add PATA resources for other i.MX processors imx: efika: Enable pata. imx51: add pata clock imx51: add pata device Fix up trivial conflict (new selects next to each other from separate branches for EFIKA_COMMON) in arch/arm/mach-mx5/Kconfig
2011-10-31Merge branch 'depends/rmk/gpio' into next/develArnd Bergmann
Conflicts: arch/arm/mach-mxs/include/mach/gpio.h arch/arm/plat-mxc/include/mach/gpio.h Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-10ARM: at91: at91sam9g45: add trng clock and platform devicePeter Korsgaard
For the new hw_random driver. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-09-10at91: at91-ohci: configure overcurrent pins as input GPIOsThomas Petazzoni
As a new overcurrent_pin[] array has been added to the at91_usbh_data structure, those pins must be muxed to work properly. This commit implements this muxing for all AT91 SoCs that support the AT91 OHCI. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> [nicolas.ferre@atmel.com: added i variable declaration for the loop] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-08-08ARM: gpio: convert includes of mach/gpio.h and asm/gpio.h to linux/gpio.hRussell King
Convert arch/arm includes of mach/gpio.h and asm/gpio.h to linux/gpio.h before we start consolidating the individual platform implementations of the gpio header files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-06-25at91: fix at91_set_serial_console: use platform device idJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-05-25at91: switch to CLKDEV_LOOKUPJean-Christophe PLAGNIOL-VILLARD
we do not change the clock naming convention so does not need to switch the AVR32 yet Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-05-25atmel_serial: keep the platform_device unchangedJean-Christophe PLAGNIOL-VILLARD
specify the port num via platform_data this will allow to match the clock with the plaform_dev staticaly Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Alan Cox <alan@linux.intel.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com> Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Cc: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-10treewide: remove extra semicolonsJustin P. Mattock
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-26at91/atmel-mci: inclusion of sd/mmc driver in at91sam9g45 chip and boardNicolas Ferre
This adds the support of atmel-mci sd/mmc driver in at91sam9g45 devices and board files. This also configures the DMA controller slave interface for at_hdmac dmaengine driver. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-09-23ARM: 6406/1: at91sam9g45: fix i2c bus speedPeter Korsgaard
Use a correct udelay value to get bus speed around 100KHz. The udelay value was most likely copied from the older devices, but the 9g45 is signicantly faster (400MHz, DDR, ..), so a udelay of 2 gives a bus speed of around 190KHz, which is too fast for some devices. A udelay value of 5 gives a bus speed of around 90KHz here. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-09AT91: SAM9G45 - add a separate clock entry for every single TC blockFabian Godehardt
Without this patch you will not be able to register the first block because of the second association call on at91_add_device_tc(). Signed-off-by: Fabian Godehardt <fg@emlix.com> [nicolas.ferre@atmel.com: change tcb1_clk to fake child clock of tcb0_clk] Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-09-07AT91: change dma resource indexNicolas Ferre
Reported-by: Dan Liang <dan.liang@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2009-12-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (51 commits) Input: appletouch - give up maintainership Input: dm355evm_kbd - switch to using sparse keymap library Input: wistron_btns - switch to using sparse keymap library Input: add generic support for sparse keymaps Input: fix memory leak in force feedback core Input: wistron - remove identification strings from DMI table Input: psmouse - remove identification strings from DMI tables Input: atkbd - remove identification strings from DMI table Input: i8042 - remove identification strings from DMI tables DMI: allow omitting ident strings in DMI tables Input: psmouse - do not carry DMI data around Input: matrix-keypad - switch to using dev_pm_ops Input: keyboard - fix lack of locking when traversing handler->h_list Input: gpio_keys - scan gpio state at probe and resume time Input: keyboard - add locking around event handling Input: usbtouchscreen - add support for ET&T TC5UH touchscreen controller Input: xpad - add two new Xbox 360 devices Input: polled device - do not start polling if interval is zero Input: polled device - schedule first poll immediately Input: add S3C24XX touchscreen driver ...
2009-12-05Merge branches 'at91', 'ep93xx', 'etm', 'ks8695', 'nuc', 'u300' and 'u8500' ↵Russell King
into devel
2009-11-20AT91: add touchscreen support for at91sam9g45ekesNicolas Ferre
New at91sam9g45ekes board provides a LCD with resistive touchscreen. This is the support of this feature by atmel_tsadcc driver. This also sets up platform parameters to be passed to the driver. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-10-25ARM: 5726/1: at91/USB: at91sam9g45 series USB host integrationNicolas Ferre
This is the at91 specific part of USB host integration. The EHCI high speed controller has a companion OHCI controller to manage USB full and low speed. They are sharing the same IRQ line and vbus pin. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-21ARM: 5766/1: Fix watchdog enabling for AT91SAM9G45Yegor Yefremov
The macro for the watchdog has been changed from CONFIG_AT91SAM9_WATCHDOG to CONFIG_AT91SAM9X_WATCHDOG due to AT91CAP9 chips support Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-21ARM: 5709/1: at91: add AC97 support to at91sam9g45 series and ↵Nicolas Ferre
at91sam9m10g45ek board Add the support of AC97 on the at91sam9g45 chip series and -ek board. It will share the code with AVR32 ac97c alsa driver "atmel_ac97c". Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-21ARM: 5621/1: at91/dmaengine: integration of at_hdmac driver in at91sam9g45 ↵Nicolas Ferre
series This is the integration of DMA engine driver into at91sam9g45 series device file. The associated driver is at_hdmac. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-27[ARM] 5572/1: at91: Support for at91sam9g45 series: core chip & board supportNicolas Ferre
Here are the at91 specific files dedicated to the at91sam9g45 series. They mimic the traditional at91 way of managing chips & boards. The first board that embeds at91sam9g45 chip is the AT91SAM9G45-EKES. In the future, the main board for this 9g45 series will be the AT91SAM9M10G45-EK (I choose this last name for the board file). Simple drivers are enabled in _devices and board- files. Newer peripheral support will be added in future patches. Incuded peripherals support (for now): - USART - SPI - Ethernet - NAND flash - LCD - gpio/joystick/buttons - leds and pwm Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2025-03-11 02:03:45 +0000