| Age | Commit message (Collapse) | Author |
|---|
|
Secondary CPUs write to __boot_cpu_mode with caches disabled, and thus a
cached value of __boot_cpu_mode may be incoherent with that in memory.
This could lead to a failure to detect mismatched boot modes.
This patch adds flushing to ensure that writes by secondaries to
__boot_cpu_mode are made visible before we test against it.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Christoffer Dall <cdall@cs.columbia.edu>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Commit a469abd0f868 ("ARM: elf: add new hwcap for identifying atomic
ldrd/strd instructions") added a new hwcap to identify LPAE on CPUs
which support it. Whilst the hwcap data is correct, the string reported
in /proc/cpuinfo actually matches on HWCAP_VFPD32, which was missing
an entry in the string table.
This patch fixes this problem by adding a "vfpd32" string at the correct
offset, preventing us from falsely advertising LPAE on CPUs which do not
support it.
[will: added commit message]
Acked-by: Will Deacon <will.deacon@arm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Prepare for the moving the parsing of reboot= to the generic kernel code
by making reboot_mode into a more generic form.
Signed-off-by: Robin Holt <holt@sgi.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Russ Anderson <rja@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Conflicts:
arch/arm/Makefile
arch/arm/include/asm/glue-proc.h
|
|
|
|
The __cpu_logical_map array is statically initialized to 0, which is a valid
MPIDR value. To prevent issues with the current implementation, this patch
defines an MPIDR_INVALID value, and statically initializes the
__cpu_logical_map[] array to it. Entries in the arm_dt_init_cpu_maps()
tmp_map array used to stash DT reg properties while parsing DT are initialized
with the MPIDR_INVALID value as well for consistency.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
On ARM SMP systems, cores are identified by their MPIDR register.
The MPIDR guidelines in the ARM ARM do not provide strict enforcement of
MPIDR layout, only recommendations that, if followed, split the MPIDR
on ARM 32 bit platforms in three affinity levels. In multi-cluster
systems like big.LITTLE, if the affinity guidelines are followed, the
MPIDR can not be considered an index anymore. This means that the
association between logical CPU in the kernel and the HW CPU identifier
becomes somewhat more complicated requiring methods like hashing to
associate a given MPIDR to a CPU logical index, in order for the look-up
to be carried out in an efficient and scalable way.
This patch provides a function in the kernel that starting from the
cpu_logical_map, implement collision-free hashing of MPIDR values by checking
all significative bits of MPIDR affinity level bitfields. The hashing
can then be carried out through bits shifting and ORing; the resulting
hash algorithm is a collision-free though not minimal hash that can be
executed with few assembly instructions. The mpidr is filtered through a
mpidr mask that is built by checking all bits that toggle in the set of
MPIDRs corresponding to possible CPUs. Bits that do not toggle do not carry
information so they do not contribute to the resulting hash.
Pseudo code:
/* check all bits that toggle, so they are required */
for (i = 1, mpidr_mask = 0; i < num_possible_cpus(); i++)
mpidr_mask |= (cpu_logical_map(i) ^ cpu_logical_map(0));
/*
* Build shifts to be applied to aff0, aff1, aff2 values to hash the mpidr
* fls() returns the last bit set in a word, 0 if none
* ffs() returns the first bit set in a word, 0 if none
*/
fs0 = mpidr_mask[7:0] ? ffs(mpidr_mask[7:0]) - 1 : 0;
fs1 = mpidr_mask[15:8] ? ffs(mpidr_mask[15:8]) - 1 : 0;
fs2 = mpidr_mask[23:16] ? ffs(mpidr_mask[23:16]) - 1 : 0;
ls0 = fls(mpidr_mask[7:0]);
ls1 = fls(mpidr_mask[15:8]);
ls2 = fls(mpidr_mask[23:16]);
bits0 = ls0 - fs0;
bits1 = ls1 - fs1;
bits2 = ls2 - fs2;
aff0_shift = fs0;
aff1_shift = 8 + fs1 - bits0;
aff2_shift = 16 + fs2 - (bits0 + bits1);
u32 hash(u32 mpidr) {
u32 l0, l1, l2;
u32 mpidr_masked = mpidr & mpidr_mask;
l0 = mpidr_masked & 0xff;
l1 = mpidr_masked & 0xff00;
l2 = mpidr_masked & 0xff0000;
return (l0 >> aff0_shift | l1 >> aff1_shift | l2 >> aff2_shift);
}
The hashing algorithm relies on the inherent properties set in the ARM ARM
recommendations for the MPIDR. Exotic configurations, where for instance the
MPIDR values at a given affinity level have large holes, can end up requiring
big hash tables since the compression of values that can be achieved through
shifting is somewhat crippled when holes are present. Kernel warns if
the number of buckets of the resulting hash table exceeds the number of
possible CPUs by a factor of 4, which is a symptom of a very sparse HW
MPIDR configuration.
The hash algorithm is quite simple and can easily be implemented in assembly
code, to be used in code paths where the kernel virtual address space is
not set-up (ie cpu_resume) and instruction and data fetches are strongly
ordered so code must be compact and must carry out few data accesses.
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Colin Cross <ccross@android.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Kevin Hilman <khilman@linaro.org>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into devel-stable
Conflicts:
arch/arm/kernel/smp.c
Please pull these miscellaneous LPAE fixes I've been collecting for a while
now for 3.11. They've been tested and reviewed by quite a few people, and most
of the patches are pretty trivial. -- Will Deacon.
|
|
CPUs implementing LPAE have atomic ldrd/strd instructions, meaning that
userspace software can avoid having to use the exclusive variants of
these instructions if they wish.
This patch advertises the atomicity of these instructions via the
hwcaps, so userspace can detect this CPU feature.
Reported-by: Vladimir Danushevsky <vladimir.danushevsky@oracle.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sstabellini/xen into devel-stable
Pull psci_smp_ops support from Stefano Stabellini:
It contains the generic PSCI patch and the smp_init patch that we
discussed so much about. I think it would be helpful for other
people if you could create a stable branch with these patches so
that SoC devs can base their work on it.
|
|
devel-stable
Pull ARM-v7M support from Uwe Kleine-König:
"All but the last patch were in next since next-20130418 without issues.
The last patch fixes a problem in combination with
8164f7a (ARM: 7680/1: Detect support for SDIV/UDIV from ISAR0 register)
which triggers a WARN_ON without an implemented read_cpuid_ext.
The branch merges fine into v3.10-rc1 and I'd be happy if you pulled it
for 3.11-rc1. The only missing piece to be able to run a Cortex-M3 is
the irqchip driver that will go in via Thomas Gleixner and platform
specific stuff."
|
|
Add a new 'smp_init' hook to machine_desc so platforms can specify a
function to be used to setup smp ops instead of having a statically
defined value. The hook must return true when smp_ops are initialized.
If false the static mdesc->smp_ops will be used by default.
Add the definition of "bool" by including the linux/types.h file to
asm/mach/arch.h and make it self-contained.
Signed-off-by: Jon Medhurst <tixy@linaro.org>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
|
|
Rename virt_smp_ops to psci_smp_ops and move them to arch/arm/kernel/psci_smp.c.
Remove mach-virt/platsmp.c, now unused.
Compile psci_smp if CONFIG_ARM_PSCI and CONFIG_SMP.
Add a cpu_die smp_op based on psci_ops.cpu_off.
Initialize PSCI before setting smp_ops in setup_arch.
If PSCI is available on the platform, prefer psci_smp_ops over the
platform smp_ops.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Will Deacon <will.deacon@arm.com>
CC: arnd@arndb.de
CC: marc.zyngier@arm.com
CC: linux@arm.linux.org.uk
CC: nico@linaro.org
CC: rob.herring@calxeda.com
|
|
Commit 14318efb(ARM: 7587/1: implement optimized percpu variable access)
introduces arm's __my_cpu_offset to optimize percpu vaiable access,
which really works well on hackbench, but will cause __my_cpu_offset
to return garbage value before it is initialized in cpu_init() called
by setup_arch, so accessing percpu variable before setup_arch may cause
kernel hang. But generic __my_cpu_offset always returns zero before
percpu area is brought up, and won't hang kernel.
So the patch tries to clear __my_cpu_offset on boot CPU early
to avoid boot hang.
At least now percpu variable is accessed by lockdep before
setup_arch(), and enabling CONFIG_LOCK_STAT or CONFIG_DEBUG_LOCKDEP
can trigger kernel hang.
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
* late/fixes:
ARM: OMAP2+: Fix unmet direct dependencies for SERIAL_OMAP
ARM: ux500: always select ABX500_CORE
ARM: SIRF: select SMP_ON_UP only on SMP builds
ARM: SPEAr: conditionalize l2x0 support
ARM: imx: build CPU suspend code only when needed
ARM: OMAP: build SMP code only for OMAP4/5
ARM: tegra: Tegra114 needs CPU_FREQ_TABLE
ARM: default machine descriptor for multiplatform
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
'smp-hotplug' into for-linus
|
|
Since we now have default implementations for init_time and init_irq,
the init_machine callback is the only one that is not yet optional,
but since simple DT based platforms all have the same
of_platform_populate function call in there, we can consolidate them
as well, and then actually boot with a completely empty machine_desc.
Unofortunately we cannot just default to an empty init_machine: We
cannot call of_platform_populate before init_machine because that
does not work in case of auxdata, and we cannot call it after
init_machine either because the machine might need to run code
after adding the devices.
To take the final step, this adds support for booting without defining
any machine_desc whatsoever.
For the case that CONFIG_MULTIPLATFORM is enabled, it adds a
global machine descriptor that never matches any machine but is
used as a fallback if nothing else matches. We assume that without
CONFIG_MULTIPLATFORM, we only want to boot on the systems that the kernel
is built for, so we still retain the build-time warning for missing
machine descriptors and the run-time warning when the platform does not
match in that case.
In the case that we run on a multiplatform kernel and the machine
provides a fully populated device tree, we attempt to keep booting,
hoping that no machine specific callbacks are necessary.
Finally, this also removes the misguided "select ARCH_VEXPRESS" that
was only added to avoid a build error for allnoconfig kernels.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Olof Johansson <olof@lixom.net>
Cc: "Russell King - ARM Linux" <linux@arm.linux.org.uk>
Cc: Rob Herring <robherring2@gmail.com>
|
|
On resume from CPU power down any trace hooks enabled in cpu_init()
will get called before that function has done set_my_cpu_offset(),
so any use of per-cpu variables by trace hook code will cause bad
things to happen. Prevent this by marking the function notrace.
This fixes lockups/crashes seen when enabling function tracer on TC2
with the not yet mainlined cpuidle driver.
Signed-off-by: Jon Medhurst <tixy@linaro.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
This patch adds the base support for the ARMv7-M
architecture. It consists of the corresponding arch/arm/mm/ files and
various #ifdef's around the kernel. Exception handling is implemented by
a subsequent patch.
[ukleinek: squash in some changes originating from commit
b5717ba (Cortex-M3: Add support for the Microcontroller Prototyping System)
from the v2.6.33-arm1 patch stack, port to post 3.6, drop zImage
support, drop reorganisation of pt_regs, assert CONFIG_CPU_V7M doesn't
leak into installed headers and a few cosmetic changes]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Jonathan Austin <jonathan.austin@arm.com>
Tested-by: Jonathan Austin <jonathan.austin@arm.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
tcm_init() call iotable_init() and it use early_alloc variants which
do memblock allocation. Directly using memblock allocation after
initializing bootmem should not permitted, because bootmem can't know
where are additinally reserved.
So move tcm_init() to a safe place before initalizing bootmem.
(On the U300)
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
CONFIG_LPAE doesn't exist: the correct option is CONFIG_ARM_LPAE, so fix
up the two typos under arch/arm/.
The fix to head.S is slightly scary, but this is just for setting up
an early io-mapping for the serial port when running on a big-endian,
LPAE system. Since these systems don't exist in the wild (at least, I
have no access to one outside of kvmtool, which doesn't provide a serial
port suitable for earlyprintk), then we can revisit the code later if it
causes any problems.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
The ISAR0 register indicates support for the SDIV and UDIV
instructions in both the Thumb and ARM instruction set. Read the
register to detect the supported instructions and update the
elf_hwcap mask as appropriate. This is better than adding more
and more cpuid checks in proc-v7.S for each new cpu variant that
supports these instructions.
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Stepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Don't advertise support for the SDIV/UDIV thumb instructions if
the kernel is not compiled with support for thumb userspace. This
is in line with how we remove the THUMB hwcap in these
configurations.
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Stepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Both calls are identical currently. This patch prepares to deprecate
read_cpuid on machines without cp15.
Also move an unconditional usage of read_cpuid_cachetype to a more local
scope as read_cpuid_cachetype uses read_cpuid, too.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Message-Id: 1359646587-1788-1-git-send-email-u.kleine-koenig@pengutronix.de
|
|
setup_machine_tags() procedure
This modification is needed to proper boot the custom machines with
the IDs that are not described in the mach-types.h table.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Use the previously unused TPIDRPRW register to store percpu offsets.
TPIDRPRW is only accessible in PL1, so it can only be used in the kernel.
This replaces 2 loads with a mrc instruction for each percpu variable
access. With hackbench, the performance improvement is 1.4% on Cortex-A9
(highbank). Taking an average of 30 runs of "hackbench -l 1000" yields:
Before: 6.2191
After: 6.1348
Will Deacon reported similar delta on v6 with 11MPCore.
The asm "memory clobber" are needed here to ensure the percpu offset
gets reloaded. Testing by Will found that this would not happen in
__schedule() which is a bit of a special case as preemption is disabled
but the execution can move cores.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
|
|
As soon as the device tree is unflattened the cpu logical to physical
mapping is carried out in setup_arch to build a proper array of MPIDR and
corresponding logical indexes.
The mapping could have been carried out using the flattened DT blob and
related primitives, but since the mapping is not needed by early boot
code it can safely be executed when the device tree has been uncompressed to
its tree data structure.
This patch adds the arm_dt_init_cpu maps() function call in setup_arch().
If the kernel is not compiled with DT support the function is empty and
no logical mapping takes place through it; the mapping carried out in
smp_setup_processor_id() is left unchanged.
If DT is supported the mapping created in smp_setup_processor_id() is overriden.
The DT mapping also sets the possible cpus mask, hence platform
code need not set it again in the respective smp_init_cpus() functions.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
|
|
This patch applies some basic changes to the smp_setup_processor_id()
ARM implementation to make the code that builds cpu_logical_map more
uniform across the kernel.
The function now prints the full extent of the boot CPU MPIDR[23:0] and
initializes the cpu_logical_map for CPUs up to nr_cpu_ids.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
|
|
Currently, reading /proc/cpuinfo provides userspace with CPU ID of
the CPU carrying out the read from the file. This is fine as long as all
CPUs in the system are the same. With the advent of big.LITTLE and
heterogenous ARM systems this approach provides user space with incorrect
bits of information since CPU ids in the system might differ from the one
provided by the CPU reading the file.
This patch updates the cpuinfo show function so that a read from
/proc/cpuinfo prints HW information for all online CPUs at once, mirroring
x86 behaviour.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
|
|
Conflicts:
arch/arm/kernel/smp.c
|
|
Pull ARM updates from Russell King:
"This is the first chunk of ARM updates for this merge window.
Conflicts are expected in two files - asm/timex.h and
mach-integrator/integrator_cp.c. Nothing particularly stands out more
than anything else.
Most of the growth is down to the opcodes stuff from Dave Martin,
which is countered by Rob's patches to use more of the asm-generic
headers on ARM."
(A few more conflicts grew since then, but it all looked fairly trivial)
* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (44 commits)
ARM: 7548/1: include linux/sched.h in syscall.h
ARM: 7541/1: Add ARM ERRATA 775420 workaround
ARM: ensure vm_struct has its phys_addr member filled in
ARM: 7540/1: kexec: Check segment memory addresses
ARM: 7539/1: kexec: scan for dtb magic in segments
ARM: 7538/1: delay: add registration mechanism for delay timer sources
ARM: 7536/1: smp: Formalize an IPI for wakeup
ARM: 7525/1: ptrace: use updated syscall number for syscall auditing
ARM: 7524/1: support syscall tracing
ARM: 7519/1: integrator: convert platform devices to Device Tree
ARM: 7518/1: integrator: convert AMBA devices to device tree
ARM: 7517/1: integrator: initial device tree support
ARM: 7516/1: plat-versatile: add DT support to FPGA IRQ
ARM: 7515/1: integrator: check PL010 base address from resource
ARM: 7514/1: integrator: call common init function from machine
ARM: 7522/1: arch_timers: register a time/cycle counter
ARM: 7523/1: arch_timers: enable the use of the virtual timer
ARM: 7531/1: mark kernelmode mem{cpy,set} non-experimental
ARM: 7520/1: Build dtb files in all target
ARM: Fix build warning in arch/arm/mm/alignment.c
...
|
|
In order to easily detect pathological cases, print some diagnostics
when the kernel boots.
This also provides helpers to detect that HYP mode is actually available,
which can be used by other subsystems to enable HYP specific features.
Signed-off-by: Dave Martin <dave.martin@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
This adds a 'struct smp_operations' to abstract the CPU initialization
and hot plugging functions on SMP systems, which otherwise conflict
in a multiplatform kernel. This also helps shmobile and potentially
others that have more than one method to do these.
To allow the kernel to continue building, the platform hooks are
defined as weak symbols which are overrided by the platform code.
Once all platforms are converted, the "weak" attribute will be
removed and the function made static.
Unlike the original version from Marc, this new version from Arnd
does not use a generalized abstraction for per-soc data structures
but only tries to solve the problem for the SMP operations. This
way, we can collapse the previous four data structures into a
single struct, which is less systematic but also easier to follow
as a causal reader.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Make ATAGS parsing into a source file of its own, namely atags_parse.c.
Also rename compat.c to atags_compat.c to make it clearer what it is
about. Same for atags.c which is now atags_proc.c. Gather all the atags
function declarations into a common atags.h.
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
The memory regions which are passed to arm_add_memory() from
device tree blobs via early_init_dt_add_memory_arch() can
have sizes which are larger than will fit in a 32 bit integer,
so switch to using a phys_addr_t to hold them, to avoid
silently dropping the top 32 bits of the size. Similarly, use
phys_addr_t in early_mem() so that mem=size@start command line
options specifying more than 4GB behave sensibly.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull sweeping late_initcall cleanup for arm-soc from Olof Johansson:
"This is a patch series from Shawn Guo that moves from individual
late_initcalls() to using a member in the machine structure to invoke
a platform's late initcalls.
This cleanup is a step in the move towards multiplatform kernels since
it would reduce the need to check for compatible platforms in each and
every initcall."
Fix up trivial conflicts in arch/arm/mach-{exynos/mach-universal_c210.c,
imx/mach-cpuimx51.c, omap2/board-generic.c} due to changes nearby (and,
in the case of cpuimx51.c the board support being deleted)
* tag 'cleanup-initcall' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: ux500: use machine specific hook for late init
ARM: tegra: use machine specific hook for late init
ARM: shmobile: use machine specific hook for late init
ARM: sa1100: use machine specific hook for late init
ARM: s3c64xx: use machine specific hook for late init
ARM: prima2: use machine specific hook for late init
ARM: pnx4008: use machine specific hook for late init
ARM: omap2: use machine specific hook for late init
ARM: omap1: use machine specific hook for late init
ARM: msm: use machine specific hook for late init
ARM: imx: use machine specific hook for late init
ARM: exynos: use machine specific hook for late init
ARM: ep93xx: use machine specific hook for late init
ARM: davinci: use machine specific hook for late init
ARM: provide a late_initcall hook for platform initialization
|
|
This patch adds support for CMA to dma-mapping subsystem for ARM
architecture. By default a global CMA area is used, but specific devices
are allowed to have their private memory areas if required (they can be
created with dma_declare_contiguous() function during board
initialisation).
Contiguous memory areas reserved for DMA are remapped with 2-level page
tables on boot. Once a buffer is requested, a low memory kernel mapping
is updated to to match requested memory access type.
GFP_ATOMIC allocations are performed from special pool which is created
early during boot. This way remapping page attributes is not needed on
allocation time.
CMA has been enabled unconditionally for ARMv6+ systems.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
CC: Michal Nazarewicz <mina86@mina86.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Rob Clark <rob.clark@linaro.org>
Tested-by: Ohad Ben-Cohen <ohad@wizery.com>
Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Tested-by: Robert Nelson <robertcnelson@gmail.com>
Tested-by: Barry Song <Baohua.Song@csr.com>
|
|
This allows platforms to set up things that need to be done at
late_initcall time.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Robert Lee <rob.lee@linaro.org>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
If a bank of memory spanning the 4GB boundary is added on a !CONFIG_LPAE
kernel then we will hang early during boot since the memory bank will
have wrapped around to zero.
This patch truncates memory banks for !LPAE configurations when the end
address is not representable in 32 bits.
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Pull more ARM updates from Russell King.
This got a fair number of conflicts with the <asm/system.h> split, but
also with some other sparse-irq and header file include cleanups. They
all looked pretty trivial, though.
* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (59 commits)
ARM: fix Kconfig warning for HAVE_BPF_JIT
ARM: 7361/1: provide XIP_VIRT_ADDR for no-MMU builds
ARM: 7349/1: integrator: convert to sparse irqs
ARM: 7259/3: net: JIT compiler for packet filters
ARM: 7334/1: add jump label support
ARM: 7333/2: jump label: detect %c support for ARM
ARM: 7338/1: add support for early console output via semihosting
ARM: use set_current_blocked() and block_sigmask()
ARM: exec: remove redundant set_fs(USER_DS)
ARM: 7332/1: extract out code patch function from kprobes
ARM: 7331/1: extract out insn generation code from ftrace
ARM: 7330/1: ftrace: use canonical Thumb-2 wide instruction format
ARM: 7351/1: ftrace: remove useless memory checks
ARM: 7316/1: kexec: EOI active and mask all interrupts in kexec crash path
ARM: Versatile Express: add NO_IOPORT
ARM: get rid of asm/irq.h in asm/prom.h
ARM: 7319/1: Print debug info for SIGBUS in user faults
ARM: 7318/1: gic: refactor irq_start assignment
ARM: 7317/1: irq: avoid NULL check in for_each_irq_desc loop
ARM: 7315/1: perf: add support for the Cortex-A7 PMU
...
|
|
Disintegrate asm/system.h for ARM.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Russell King <linux@arm.linux.org.uk>
cc: linux-arm-kernel@lists.infradead.org
|
|
Avoid namespace conflicts with drivers over the CP15 definitions by
moving CP15 related prototypes and definitions to a private header
file.
Acked-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com> [Tegra]
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com> [EP93xx]
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Avoid namespace conflicts with drivers over the CP15 definitions by
moving CP15 related prototypes and definitions to a private header
file.
Acked-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com> [Tegra]
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com> [EP93xx]
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Initialize the contents of the vectors page immediately after we
allocate the page, but before we map it. This avoids any possible
aliases with other mappings which may need to be flushed after the
page has been mapped irrespective of the cache type.
We follow this later with a flush_cache_all() after all static memory
mappings have been initialized, which ensures that this is safe from
any cache effects.
Tested-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
It turns out that the logical CPU mapping is useful even when !CONFIG_SMP
for manipulation of devices like interrupt and power controllers when
running a UP kernel on a CPU other than 0. This can happen when kexecing
a UP image from an SMP kernel.
In the future, multi-cluster systems running AMP configurations will
require something similar for mapping cluster IDs, so it makes sense to
decouple this logic in preparation for this support.
Acked-by: Yang Bai <hamo.by@gmail.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Reported-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Fix the following build warning:
CC arch/arm/kernel/setup.o
In file included from arch/arm/kernel/setup.c:39:
arch/arm/include/asm/elf.h:102:1: warning: "vmcore_elf64_check_arch" redefined
In file included from arch/arm/kernel/setup.c:24:
include/linux/crash_dump.h:30:1: warning: this is the location of the previous definition
Since commit 93a72052 (crash_dump: export is_kdump_kernel to modules, consolidate elfcorehdr_addr, setup_elfcorehdr and saved_max_pfn)
the inclusion of <linux/crash_dump.h> is no longer needed.
Remove the inclusion of <linux/crash_dump.h> and the build warning is fixed.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
All other ports use "Kernel code" to identify the Kernel text segment
in /proc/iomem. Change the ARM resources to do the same.
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
git://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm
* 'for-linus' of git://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (207 commits)
ARM: 7267/1: Remove BUILD_BUG_ON from asm/bug.h
ARM: 7269/1: mach-sa1100: fix sched_clock breakage
ARM: 7198/1: arm/imx6: add restart support for imx6q
ARM: restart: remove the now empty arch_reset()
ARM: restart: remove comments about adding code to arch_reset()
ARM: restart: lpc32xx & u300: remove unnecessary printk
ARM: restart: plat-samsung: remove plat/reset.h and s5p_reset_hook
ARM: restart: w90x900: use new restart hook
ARM: restart: Versatile Express: use new restart hook
ARM: restart: versatile: use new restart hook
ARM: restart: u300: use new restart hook
ARM: restart: tegra: use new restart hook
ARM: restart: spear: use new restart hook
ARM: restart: shark: use new restart hook
ARM: restart: sa1100: use new restart hook
ARM: 7252/1: restart: S5PV210: use new restart hook
ARM: 7251/1: restart: S5PC100: use new restart hook
ARM: 7250/1: restart: S5P64X0: use new restart hook
ARM: 7266/1: restart: S3C64XX: use new restart hook
ARM: 7265/1: restart: S3C24XX: use new restart hook
...
Fix up trivial conflict in arch/arm/mm/init.c due to removal of
memblock_init() clashing with the movement of the sorting of the meminfo
array.
|
|
Conflicts:
arch/arm/kernel/setup.c
arch/arm/mach-shmobile/board-kota2.c
|
