aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/include/asm/smp_plat.h
AgeCommit message (Collapse)Author
2013-06-24ARM: 7763/1: kernel: fix __cpu_logical_map default initializationLorenzo Pieralisi
The __cpu_logical_map array is statically initialized to 0, which is a valid MPIDR value. To prevent issues with the current implementation, this patch defines an MPIDR_INVALID value, and statically initializes the __cpu_logical_map[] array to it. Entries in the arm_dt_init_cpu_maps() tmp_map array used to stash DT reg properties while parsing DT are initialized with the MPIDR_INVALID value as well for consistency. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-11-19ARM: kernel: add logical mappings look-upLorenzo Pieralisi
In ARM SMP systems the MPIDR register ([23:0] bits) is used to uniquely identify CPUs. In order to retrieve the logical CPU index corresponding to a given MPIDR value and guarantee a consistent translation throughout the kernel, this patch adds a look-up based on the MPIDR[23:0] so that kernel subsystems can use it whenever the logical cpu index corresponding to a given MPIDR value is needed. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org>
2012-01-23ARM: 7293/1: logical_cpu_map: decouple CPU mapping from SMPWill Deacon
It turns out that the logical CPU mapping is useful even when !CONFIG_SMP for manipulation of devices like interrupt and power controllers when running a UP kernel on a CPU other than 0. This can happen when kexecing a UP image from an SMP kernel. In the future, multi-cluster systems running AMP configurations will require something similar for mapping cluster IDs, so it makes sense to decouple this logic in preparation for this support. Acked-by: Yang Bai <hamo.by@gmail.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reported-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-18Merge branches 'at91', 'dcache', 'ftrace', 'hwbpt', 'misc', 'mmci', 's3c', ↵Russell King
'st-ux' and 'unwind' into devel
2010-10-08ARM: 6429/1: Check for is_smp for tlb_ops and cache_ops broadcastTony Lindgren
Broadcast should not be needed when running SMP kernel on UP systems. Also, this fixes an undefined instruction for SMP_ON_UP on earlier ARM cores without the extended CPUID_EXT_MMFR3 register. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-04ARM: Allow SMP kernels to boot on UP systemsRussell King
UP systems do not implement all the instructions that SMP systems have, so in order to boot a SMP kernel on a UP system, we need to rewrite parts of the kernel. Do this using an 'alternatives' scheme, where the kernel code and data is modified prior to initialization to replace the SMP instructions, thereby rendering the problematical code ineffectual. We use the linker to generate a list of 32-bit word locations and their replacement values, and run through these replacements when we detect a UP system. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-19ARM: 6381/1: Use lazy cache flushing on ARMv7 SMP systemsCatalin Marinas
ARMv7 processors like Cortex-A9 broadcast the cache maintenance operations in hardware. This patch allows the flush_dcache_page/update_mmu_cache pair to work in lazy flushing mode similar to the UP case. Note that cache flushing on SMP systems now takes place via the set_pte_at() call (__sync_icache_dcache) and there is no race with other CPUs executing code from the new PTE before the cache flushing took place. Tested-by: Rabin Vincent <rabin.vincent@stericsson.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-14ARM: Fix ptrace accessesRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-28ARM: Don't allow highmem on SMP platforms without h/w TLB ops broadcastRussell King
We suffer an unfortunate combination of "features" which makes highmem support on platforms without hardware TLB maintainence broadcast difficult: - we need kmap_high_get() support for DMA cache coherence - this requires kmap_high() to take a spinlock with IRQs disabled - kmap_high() occasionally calls flush_all_zero_pkmaps() to clear out old mappings - flush_all_zero_pkmaps() calls flush_tlb_kernel_range(), which on s/w IPI'd systems eventually calls smp_call_function_many() - smp_call_function_many() must not be called with IRQs disabled: WARNING: at kernel/smp.c:380 smp_call_function_many+0xc4/0x240() Modules linked in: Backtrace: [<c00306f0>] (dump_backtrace+0x0/0x108) from [<c0286e6c>] (dump_stack+0x18/0x1c) r6:c007cd18 r5:c02ff228 r4:0000017c [<c0286e54>] (dump_stack+0x0/0x1c) from [<c0053e08>] (warn_slowpath_common+0x50/0x80) [<c0053db8>] (warn_slowpath_common+0x0/0x80) from [<c0053e50>] (warn_slowpath_null+0x18/0x1c) r7:00000003 r6:00000001 r5:c1ff4000 r4:c035fa34 [<c0053e38>] (warn_slowpath_null+0x0/0x1c) from [<c007cd18>] (smp_call_function_many+0xc4/0x240) [<c007cc54>] (smp_call_function_many+0x0/0x240) from [<c007cec0>] (smp_call_function+0x2c/0x38) [<c007ce94>] (smp_call_function+0x0/0x38) from [<c005980c>] (on_each_cpu+0x1c/0x38) [<c00597f0>] (on_each_cpu+0x0/0x38) from [<c0031788>] (flush_tlb_kernel_range+0x50/0x58) r6:00000001 r5:00000800 r4:c05f3590 [<c0031738>] (flush_tlb_kernel_range+0x0/0x58) from [<c009c600>] (flush_all_zero_pkmaps+0xc0/0xe8) [<c009c540>] (flush_all_zero_pkmaps+0x0/0xe8) from [<c009c6b4>] (kmap_high+0x8c/0x1e0) [<c009c628>] (kmap_high+0x0/0x1e0) from [<c00364a8>] (kmap+0x44/0x5c) [<c0036464>] (kmap+0x0/0x5c) from [<c0109dfc>] (cramfs_readpage+0x3c/0x194) [<c0109dc0>] (cramfs_readpage+0x0/0x194) from [<c0090c14>] (__do_page_cache_readahead+0x1f0/0x290) [<c0090a24>] (__do_page_cache_readahead+0x0/0x290) from [<c0090ce4>] (ra_submit+0x30/0x38) [<c0090cb4>] (ra_submit+0x0/0x38) from [<c0089384>] (filemap_fault+0x3dc/0x438) r4:c1819988 [<c0088fa8>] (filemap_fault+0x0/0x438) from [<c009d21c>] (__do_fault+0x58/0x43c) [<c009d1c4>] (__do_fault+0x0/0x43c) from [<c009e8cc>] (handle_mm_fault+0x104/0x318) [<c009e7c8>] (handle_mm_fault+0x0/0x318) from [<c0033c98>] (do_page_fault+0x188/0x1e4) [<c0033b10>] (do_page_fault+0x0/0x1e4) from [<c0033ddc>] (do_translation_fault+0x7c/0x84) [<c0033d60>] (do_translation_fault+0x0/0x84) from [<c002b474>] (do_DataAbort+0x40/0xa4) r8:c1ff5e20 r7:c0340120 r6:00000805 r5:c1ff5e54 r4:c03400d0 [<c002b434>] (do_DataAbort+0x0/0xa4) from [<c002bcac>] (__dabt_svc+0x4c/0x60) ... So we disable highmem support on these systems. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>