| Age | Commit message (Collapse) | Author |
|---|
|
white space clean up.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Camel case changes
pDevice, cbFrameLength, wRate, byPacketType, cbBitCount, cbUsCount
cbTmp, bExtBit, byPreambleType
->
priv, frame_length, tx_rate, pkt_type, bit_count, count,
tmp, ext_bit, preamble_type
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
White space clean up.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Camel case changes.
byPreambleType, byPktType, cbFrameLength, uFrameTime, uPreamble, uTmp, uRate
->
preamble_type, pkt_type, frame_length, frame_time, preamble, tmp, rate
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove uRateIdx and rename wRate tx_rate
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
clean up white space.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
After dead code dpc hostapd remove aes.c/h
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
After dead code hostapd remove bRelayPacketSend
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove dead functions
s_bAPModeRxCtl
s_bAPModeRxData
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove throughout driver
bEnableHostapd
bEnable8021x
bEnableHostWEP
struct net_device *apdev
tx_80211
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It is based on viawget, proprietary version of wpa supplicant.
The code is not compatible with the current version of hostapd.
It may be possible to implement when the driver is fully converted
to mac80211.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
All of the verification checks of magic numbers are now done by
verifiers, so ther eis no need to check them again once the buffer
has been successfully read. If the magic number is bad, it won't
even get to that code to verify it so it really serves no purpose at
all anymore. Remove it.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
The addition of direct formatting of log items into the CIL
linear buffer added alignment restrictions that the start of each
vector needed to be 64 bit aligned. Hence padding was added in
xlog_finish_iovec() to round up the vector length to ensure the next
vector started with the correct alignment.
This adds a small number of bytes to the size of
the linear buffer that is otherwise unused. The issue is that we
then use the linear buffer size to determine the log space used by
the log item, and this includes the unused space. Hence when we
account for space used by the log item, it's more than is actually
written into the iclogs, and hence we slowly leak this space.
This results on log hangs when reserving space, with threads getting
stuck with these stack traces:
Call Trace:
[<ffffffff81d15989>] schedule+0x29/0x70
[<ffffffff8150d3a2>] xlog_grant_head_wait+0xa2/0x1a0
[<ffffffff8150d55d>] xlog_grant_head_check+0xbd/0x140
[<ffffffff8150ee33>] xfs_log_reserve+0x103/0x220
[<ffffffff814b7f05>] xfs_trans_reserve+0x2f5/0x310
.....
The 4 bytes is significant. Brain Foster did all the hard work in
tracking down a reproducable leak to inode chunk allocation (it went
away with the ikeep mount option). His rough numbers were that
creating 50,000 inodes leaked 11 log blocks. This turns out to be
roughly 800 inode chunks or 1600 inode cluster buffers. That
works out at roughly 4 bytes per cluster buffer logged, and at that
I started looking for a 4 byte leak in the buffer logging code.
What I found was that a struct xfs_buf_log_format structure for an
inode cluster buffer is 28 bytes in length. This gets rounded up to
32 bytes, but the vector length remains 28 bytes. Hence the CIL
ticket reservation is decremented by 32 bytes (via lv->lv_buf_len)
for that vector rather than 28 bytes which are written into the log.
The fix for this problem is to separately track the bytes used by
the log vectors in the item and use that instead of the buffer
length when accounting for the log space that will be used by the
formatted log item.
Again, thanks to Brian Foster for doing all the hard work and long
hours to isolate this leak and make finding the bug relatively
simple.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
There is no need to dip into reserve pool. Reserve pool is used for much
more important things. And xfs_trans_reserve will never return ENOSPC
because punch hole is already done. If we get ENOSPC, collapse range
will be simply failed.
Cc: Brian Foster <bfoster@redhat.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
This allows for a more generic NFC sniffing by using SOCKPROTO_RAW
SOCK_RAW to read RAW NFC frames. This is for sniffing anything but LLCP
(HCI, NCI, etc...).
Signed-off-by: Hiren Tandel <hirent@marvell.com>
Signed-off-by: Rahul Tank <rahult@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
|
|
ATR_RES response received within Activation Parameters is already
in correct order. Reversing it fails LLCP magic number check and
so P2P functionality fails.
Signed-off-by: Hiren Tandel <hirent@marvell.com>
Signed-off-by: Rahul Tank <rahult@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
|
|
According to section 5.15.1.3 of the NFC Activity
Specification, multiple SENSF_REQ commands can be
received by a target before it receives an ATR_REQ
command. To handle this, add a routine that checks
whether a SENSF_REQ or ATR_REQ has been recieved.
If its a SENSF_REQ, respond appropriately and
continue waiting for a ATR_REQ. If its an ATR_REQ,
handle it as before.
CC: Thierry Escande <thierry.escande@linux.intel.com>
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
|
|
The check in digital_tg_send_sensf_res() that excludes
the 'RD' field from the SENSF_RES is inverted. The 'RD'
field should be excluded when the SENSF_REQ 'RC' field
is equal to DIGITAL_SENSF_REQ_RC_NONE instead of when
its not equal. This is described in section 6.6.2.11
of the NFC Digital Specification.
CC: Thierry Escande <thierry.escande@linux.intel.com>
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
|
|
We reject any filesystem that is mounted with this feature bit set,
so we don't need to check for it anywhere else. Remove the function
for checking if the feature bit is set and any code that uses it.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
If the the V2 directory feature bit is not set in the superblock
feature mask the filesystem will fail the good version check.
Hence we don't need any other version checking on the dir2 feature
bit in the code as the filesystem will not mount without it set.
Remove the checking code.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
mkfs has turned on the XFS_SB_VERSION_NLINKBIT feature bit by
default since November 2007. It's about time we simply made the
kernel code turn it on by default and so always convert v1 inodes to
v2 inodes when reading them in from disk or allocating them. This
This removes needless version checks and modification when bumping
link counts on inodes, and will take code out of a few common code
paths.
text data bss dec hex filename
783251 100867 616 884734 d7ffe fs/xfs/xfs.o.orig
782664 100867 616 884147 d7db3 fs/xfs/xfs.o.patched
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Whenever we update sb_features2, we need to update sb_bad_features2
so that they remain identical on disk. This prevents future mounts
or userspace utilities from getting confused over which features the
filesystem supports.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
We only support filesystems that have v2 directory support, and than
means all the checking and handling of superblock versions prior to
this support being added is completely unnecessary overhead.
Strip out all the version 1-3 support, sanitise the good version
checking to reflect the supported versions, update all the feature
supported functions and clean up all the support bit definitions to
reflect the fact that we no longer care about Irix bootloader flag
regions for v4 feature bits. Also, convert the return values to
boolean types and remove typedefs from function declarations to
clean up calling conventions, too.
Because the feature bit checking is all inline code, this relatively
small cleanup has a noticable impact on code size:
text data bss dec hex filename
785195 100867 616 886678 d8796 fs/xfs/xfs.o.orig
783595 100867 616 885078 d8156 fs/xfs/xfs.o.patched
i.e. it reduces it by 1600 bytes.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
In ungraceful teardowns isert close flows seem racy such that
isert_wait_conn hangs as RDMA_CM_EVENT_DISCONNECTED never
gets invoked (no one called rdma_disconnect).
Both graceful and ungraceful teardowns will have rx flush errors
(isert posts a batch once connection is established). Once all
flush errors are consumed we invoke isert_wait_conn and it will
be responsible for calling rdma_disconnect. This way it can be
sure that rdma_disconnect was called and it won't wait forever.
This patch also removes the logout_posted indicator. either the
logout completion was consumed and no problem decrementing the
post_send_buf_count, or it was consumed as a flush error. no point
of keeping it for isert_wait_conn as there is no danger that
isert_conn will be accidentally removed while it is running.
(Drop unnecessary sleep_on_conn_wait_comp check in
isert_cq_rx_comp_err - nab)
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
In case np_thread state is in RESET/SHUTDOWN/EXIT states,
no point for isert to stall there as we may get a hang in
case no one will wake it up later.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
Mixing upper and lower case in names of macros like It_Is_Macro is
not accepted in the Linux Kernel. To prepare skein driver for mainline
inclusion, we rename all macros to uppercase or lowercase names.
Signed-off-by: Anton Saraev <antonysaraev@gmail.com>
Reviewed-by: Jake Edge <jake@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Linux Kernel use capitalized names for enum. To prepare skein
driver to mainline inclusion, we rename all enums to capitalized
names.
Signed-off-by: Anton Saraev <antonysaraev@gmail.com>
Reviewed-by: Jake Edge <jake@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Code have skein_512_ctx and skein_256_ctx but skein1024_ctx.
It would be logical to convert these names to a single form.
Signed-off-by: Anton Saraev <antonysaraev@gmail.com>
Reviewed-by: Jake Edge <jake@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
camelCase is not accepted in the Linux Kernel. To prepare skein
driver for mainline inclusion, we rename all vars to
non-camelCase equivalents.
Signed-off-by: Anton Saraev <antonysaraev@gmail.com>
Reviewed-by: Jake Edge <jake@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The OPP code is an in kernel library selected by its users, there is no
no architecture code required to implement it and enabling it without a
user just increases the kernel size. Since the users select rather than
depend on it just remove the ability to directly set the option from
Kconfig.
Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Nishanth Menon <nm@ti.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In of_init_opp_table function, if a failure to add an OPP is
detected, the count of OPPs, yet to be added is not updated.
Fix this by decrementing this count on failure as well.
Signed-off-by: Chander Kashyap <k.chander@samsung.com>
Signed-off-by: Inderpal Singh <inderpal.s@samsung.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 3.7+ <stable@vger.kernel.org> # 3.7+
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Enable the SD Card reader and the internal eMMC on the Berlin BG2Q DMP
using two of the SDHCI nodes of the Berlin BG2Q.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
|
|
Add the SDHCI nodes for the Marvell Berlin BG2Q, using the mrvl,pxav3-mmc
driver.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
|
|
Add pinctrl bindings and system control nodes to what we currently know
about Berlin SoCs. Where available, also set default pinctrl property
for uarts, when there is only one pinmux option for it.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
|
|
Add pin control binding documentation to the SoC binding documentaion
as pinctrl is part of chip/system control registers. The documentation
also explains how to configure this group based controller.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
|
|
This converts Berlin BG2Q SoC dtsi to make use of the new DT clock
nodes for Berlin SoCs.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
|
|
This converts Berlin BG2 SoC dtsi to make use of the new DT clock
nodes for Berlin SoCs. While at it, also fix up twdclk which is
running at cpuclk/3 instead of sysclk.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
|
|
This converts Berlin BG2CD SoC dtsi to make use of the new DT clock
nodes for Berlin SoCs. Also add a binding include to ease core clock
references.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
|
|
This adds a dt-binding include for Marvell Berlin BG2/BG2CD and BG2Q
core clock IDs.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
|
This adds mandatory device tree binding documentation for the clock related
IP found on Marvell Berlin2 (BG2, BG2CD, and BG2Q) SoCs to the Berlin SoC
binding documentation.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
|
|
The Berlin BG2CD has 32 GPIOs in SoC power domain and 16 in the SM one.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
|
|
The Berlin BG2 has 32 GPIOs in SoC power domain and 16 in the SM one.
Only the first 8 SM GPIOs have interrupt support.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
|
|
The Marvell Berlin BG2Q has 6 GPIO ports compatible with the snps,dw-apb-gpio
driver. This patch adds the corresponding device tree nodes.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Reviewed-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
|
|
This adds scu and general purpose registers device nodes required for
SMP on Berlin BG2 and BG2Q SoCs. The secondary CPUs will pick their jump
address from general purpose (SW generic) register 1.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Jisheng Zhang <jszhang@marvell.com>
Tested-by: Antoine Tenart <antoine.tenart@free-electrons.com>
|
|
Adds initial support for the Marvell BG2-Q DMP. The board has 2GB of
memory, an uart activated and what's initially supported by the Marvell
Armada 1500 pro dtsi.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
|
|
Adds initial support for the Marvell Armada 1500 pro (BG2Q) SoC (Berlin family).
The SoC has nodes for cpu, l2 cache controller, interrupt controllers, local
timer, apb timers and uarts for now. Also add corresponding binding documentation.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
|
|
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
|
|
The BG2Q has GPIOs driven by the dwapb GPIO driver. Add the LIBGPIO as a
dependency to be able to support them.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Reviewed-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
|
|
Now that we start supporting the Marvell Berlin BG2Q, add a symbol allowing to
differentiate that SoC from the other SoCs of the Berlin family.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
|
|
This adds Marvell Berlin Armada 1500 Pro (BG2Q) to Marvell SoC documentation.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
|
