| Age | Commit message (Collapse) | Author |
|---|
|
Clear the reset domain after a succesful GPU reset on ilk. We already
do that on gen4, so let's try to be a bit more consistent. And if
ether render or media reset fails, we might use the leftover value
in the register to pinpoint the culprit.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
I missed a rename during the review process. Fix the
MODULE_DEVICE_TABLE to match the structure.
Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This removes the last vestiges of arch_vma_name from x86, replacing it
with vm_ops->name. Good riddance.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/e681cb56096eee5b8b8767093a4f6fb82839f0a4.1400538962.git.luto@amacapital.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
|
Using arch_vma_name to give special mappings a name is awkward. x86
currently implements it by comparing the start address of the vma to
the expected address of the vdso. This requires tracking the start
address of special mappings and is probably buggy if a special vma
is split or moved.
Improve _install_special_mapping to just name the vma directly. Use
it to give the x86 vvar area a name, which should make CRIU's life
easier.
As a side effect, the vvar area will show up in core dumps. This
could be considered weird and is fixable.
[hpa: I say we accept this as-is but be prepared to deal with knocking
out the vvars from core dumps if this becomes a problem.]
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/276b39b6b645fb11e345457b503f17b83c2c6fd0.1400538962.git.luto@amacapital.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
|
All the other bits in the GDSR register are read-only, so we don't have
to preserve them when we perform a GPU reset.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
arch_vma_name sucks. It's a silly hack, and it's annoying to
implement correctly. In fact, AFAICS, even the straightforward x86
implementation is incorrect (I suspect that it breaks if the vdso
mapping is split or gets remapped).
This adds a new vm_ops->name operation that can replace it. The
followup patches will remove all uses of arch_vma_name on x86,
fixing a couple of annoyances in the process.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/2eee21791bb36a0a408c5c2bdb382a9e6a41ca4a.1400538962.git.luto@amacapital.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
|
The oops can be triggered in qemu using -no-hpet (but not nohpet) by
reading a couple of pages past the end of the vdso text. This
should send SIGBUS instead of OOPSing.
The bug was introduced by:
commit 7a59ed415f5b57469e22e41fc4188d5399e0b194
Author: Stefani Seibold <stefani@seibold.net>
Date: Mon Mar 17 23:22:09 2014 +0100
x86, vdso: Add 32 bit VDSO time support for 32 bit kernel
which is new in 3.15.
This will be fixed separately in 3.15, but that patch will not apply
to tip/x86/vdso. This is the equivalent fix for tip/x86/vdso and,
presumably, 3.16.
Cc: Stefani Seibold <stefani@seibold.net>
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/c8b0a9a0b8d011a8b273cbb2de88d37190ed2751.1400538962.git.luto@amacapital.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
|
Commit 85ad643b ("dm thin: add timeout to stop out-of-data-space mode
holding IO forever") introduced a fixed 60 second timeout. Users may
want to either disable or modify this timeout.
Allow the out-of-data-space timeout to be configured using the
'no_space_timeout' dm-thin-pool module param. Setting it to 0 will
disable the timeout, resulting in IO being queued until more data space
is added to the thin-pool.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # 3.14+
|
|
In case user chose to set T10-PI enable on the target while
the IB device does not support it, gracefully reject the request.
Reported-by: Slava Shwartsman <valyushash@gmail.com>
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Cc: stable@vger.kernel.org # 3.15+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
disconnected_handler works are scheduled on system_wq.
When attempting to unload, first make sure all works
have cleaned up.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
There are 4 RDMA_CM events that all basically mean that
the user should teardown the IB connection:
- DISCONNECTED
- ADDR_CHANGE
- DEVICE_REMOVAL
- TIMEWAIT_EXIT
Only in DISCONNECTED/ADDR_CHANGE it makes sense to
call rdma_disconnect (send DREQ/DREP to our initiator).
So we keep the same teardown handler for all of them
but only indicate calling rdma_disconnect for the relevant
events.
This patch also removes redundant debug prints for each single
event.
v2 changes:
- Call isert_disconnected_handler() for DEVICE_REMOVAL (Or + Sag)
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
Move error handling to service thread, and use mtip_set_timeout()
to set timeouts for HDIO_DRIVE_TASK and HDIO_DRIVE_CMD IOCTL commands.
Signed-off-by: Selvan Mani <smani@micron.com>
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
For request_fn based devices, the block layer exports a 'nr_requests'
file through sysfs to allow adjusting of queue depth on the fly.
Currently this returns -EINVAL for blk-mq, since it's not wired up.
Wire this up for blk-mq, so that it now also always dynamic
adjustments of the allowed queue depth for any given block device
managed by blk-mq.
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
I'm trying to reduce the WARNs during driver reload and this was one of
them. Also while at it remove the redundant condition from before
unregister_shrinker().
v2:
- fix the error path too and move the unregister to its logical place
(Chris)
- remove redundant condition from before unregister_shrinker()
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
When running send, if an inode only has extended reference items
associated to it and no regular references, send.c:get_first_ref()
was incorrectly assuming the reference it found was of type
BTRFS_INODE_REF_KEY due to use of the wrong key variable.
This caused weird behaviour when using the found item has a regular
reference, such as weird path string, and occasionally (when lucky)
a crash:
[ 190.600652] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC
[ 190.600994] Modules linked in: btrfs xor raid6_pq binfmt_misc nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc psmouse serio_raw evbug pcspkr i2c_piix4 e1000 floppy
[ 190.602565] CPU: 2 PID: 14520 Comm: btrfs Not tainted 3.13.0-fdm-btrfs-next-26+ #1
[ 190.602728] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 190.602868] task: ffff8800d447c920 ti: ffff8801fa79e000 task.ti: ffff8801fa79e000
[ 190.603030] RIP: 0010:[<ffffffff813266b4>] [<ffffffff813266b4>] memcpy+0x54/0x110
[ 190.603262] RSP: 0018:ffff8801fa79f880 EFLAGS: 00010202
[ 190.603395] RAX: ffff8800d4326e3f RBX: 000000000000036a RCX: ffff880000000000
[ 190.603553] RDX: 000000000000032a RSI: ffe708844042936a RDI: ffff8800d43271a9
[ 190.603710] RBP: ffff8801fa79f8c8 R08: 00000000003a4ef0 R09: 0000000000000000
[ 190.603867] R10: 793a4ef09f000000 R11: 9f0000000053726f R12: ffff8800d43271a9
[ 190.604020] R13: 0000160000000000 R14: ffff8802110134f0 R15: 000000000000036a
[ 190.604020] FS: 00007fb423d09b80(0000) GS:ffff880216200000(0000) knlGS:0000000000000000
[ 190.604020] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 190.604020] CR2: 00007fb4229d4b78 CR3: 00000001f5d76000 CR4: 00000000000006e0
[ 190.604020] Stack:
[ 190.604020] ffffffffa01f4d49 ffff8801fa79f8f0 00000000000009f9 ffff8801fa79f8c8
[ 190.604020] 00000000000009f9 ffff880211013260 000000000000f971 ffff88021147dba8
[ 190.604020] 00000000000009f9 ffff8801fa79f918 ffffffffa02367f5 ffff8801fa79f928
[ 190.604020] Call Trace:
[ 190.604020] [<ffffffffa01f4d49>] ? read_extent_buffer+0xb9/0x120 [btrfs]
[ 190.604020] [<ffffffffa02367f5>] fs_path_add_from_extent_buffer+0x45/0x60 [btrfs]
[ 190.604020] [<ffffffffa0238806>] get_first_ref+0x1f6/0x210 [btrfs]
[ 190.604020] [<ffffffffa0238994>] __get_cur_name_and_parent+0x174/0x3a0 [btrfs]
[ 190.604020] [<ffffffff8118df3d>] ? kmem_cache_alloc_trace+0x11d/0x1e0
[ 190.604020] [<ffffffffa0236674>] ? fs_path_alloc+0x24/0x60 [btrfs]
[ 190.604020] [<ffffffffa0238c91>] get_cur_path+0xd1/0x240 [btrfs]
(...)
Steps to reproduce (either crash or some weirdness like an odd path string):
mkfs.btrfs -f -O extref /dev/sdd
mount /dev/sdd /mnt
mkdir /mnt/testdir
touch /mnt/testdir/foobar
for i in `seq 1 2550`; do
ln /mnt/testdir/foobar /mnt/testdir/foobar_link_`printf "%04d" $i`
done
ln /mnt/testdir/foobar /mnt/testdir/final_foobar_name
rm -f /mnt/testdir/foobar
for i in `seq 1 2550`; do
rm -f /mnt/testdir/foobar_link_`printf "%04d" $i`
done
btrfs subvolume snapshot -r /mnt /mnt/mysnap
btrfs send /mnt/mysnap -f /tmp/mysnap.send
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
|
|
For inline data extent, we need to make its length aligned, otherwise,
we can get a phantom extent map which confuses readpages() to return -EIO.
This can be detected by xfstests/btrfs/035.
Reported-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
|
|
Certain HCA types (e.g. Connect-IB) and certain configurations (e.g.
ConnectX VF) support fast registration but not FMR. Hence add fast
registration support.
In function srp_rport_reconnect(), move the the srp_finish_req()
loop from after to before the srp_create_target_ib() call. This is
needed to avoid that srp_finish_req() tries to queue any
invalidation requests for rkeys associated with the old queue pair
on the newly allocated queue pair. Invoking srp_finish_req() before
the queue pair has been reallocated is safe since srp_claim_req()
handles completions correctly that arrive after srp_finish_req()
has been invoked.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
The next patch will cause the renamed variables to be shared between
the code for FMR and for FR memory registration. Make the names of
these variables independent of the memory registration mode. This
patch does not change any functionality. The start of this patch was
the changes applied via the following shell command:
sed -i.orig 's/SRP_FMR_SIZE/SRP_MAX_PAGES_PER_MR/g; \
s/fmr_page_mask/mr_page_mask/g;s/fmr_page_size/mr_page_size/g; \
s/fmr_page_shift/mr_page_shift/g;s/fmr_max_size/mr_max_size/g; \
s/max_pages_per_fmr/max_pages_per_mr/g;s/nfmr/nmdesc/g; \
s/fmr_len/dma_len/g' drivers/infiniband/ulp/srp/ib_srp.[ch]
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
Allocate one FMR pool per SRP connection instead of one SRP pool
per HCA. This improves scalability of the SRP initiator.
Only request the SCSI mid-layer to retry a SCSI command after a
temporary mapping failure (-ENOMEM) but not after a permanent
mapping failure. This avoids that SCSI commands are retried
indefinitely if a permanent memory mapping failure occurs.
Tell the SCSI mid-layer to reduce queue depth temporarily in the
unlikely case where an application is queuing many requests with
more than max_pages_per_fmr sg-list elements.
For FMR pool allocation, base the max_pages_per_fmr parameter on
the HCA memory registration limit. Only try to allocate an FMR
pool if FMR is supported.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
Add a kernel module parameter that enables memory registration also for SG-lists
that can be processed without memory registration. This makes it easier for kernel
developers to test the memory registration code.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
Avoid that the kernel-doc tool warns about missing argument
descriptions for the ib_srp.[ch] source files.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
Avoid that the loops that iterate over the request ring can encounter
a pointer to a SCSI command in req->scmnd that is no longer associated
with that request. If the function srp_unmap_data() is invoked twice
for a SCSI command that is not in flight then that would cause
ib_fmr_pool_unmap() to be invoked with an invalid pointer as argument,
resulting in a kernel oops.
Reported-by: Sagi Grimberg <sagig@mellanox.com>
Reference: http://thread.gmane.org/gmane.linux.drivers.rdma/19068/focus=19069
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
|
Now that smp_confirm() is called "inline" we can have it return a
response code and have the sending of it be done in the shared place for
command handlers. One exception is when we're entering smp.c from mgmt.c
when user space responds to authentication, in which case we still need
our own code to call smp_failure().
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Since we're now calling smp_random() "inline" we can have it directly
return a response code and have the shared command handler send the
response.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
There's no reason to have "smp" in this variable name since it is
already part of the SMP struct which provides sufficient context.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
When the SMP code was initially created (mid-2011) parts of the
Bluetooth subsystem were still not converted to use workqueues. This
meant that the crypto calls, which could sleep, couldn't be called
directly. Because of this the "confirm" and "random" work structs were
introduced.
These days the entire Bluetooth subsystem runs through workqueues which
makes these structs unnecessary. This patch removes them and converts
the calls to queue them to use direct function calls instead.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
There is no reason to have the initial local value conditional to
whether the remote value has bonding set or not. We can either way start
off with the value we received.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
There are no users of the smp_chan struct outside of smp.c so move it
away from smp.h. The addition of the l2cap.h include to hci_core.c,
hci_conn.c and mgmt.c is something that should have been there already
previously to avoid warnings of undeclared struct l2cap_conn, but the
compiler warning was apparently shadowed away by the mention of
l2cap_conn in the struct smp_chan definition.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
The new function vlan_get_encap_level() uses vlan_dev_priv()
which is only conditionally avaialble when VLAN support is
enabled. Make vlan_get_encap_level() conditionally available
as well.
Fixes: 44a4085538c8 ("bonding: Fix stacked device detection in arp monitoring")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
CC: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are several problems with the code that rescuers use to bind
themselve to the target pool's cpumask.
1) It is very different from how the normal workers bind to cpumask,
increasing code complexity and maintenance overhead.
2) The code of cpu-binding for rescuers is complicated.
3) If one or more cpu hotplugs happen while a rescuer is processing
its scheduled work items, the rescuer may not stay bound to the
cpumask of the pool. This is an allowed behavior, but is still
hairy. It will be better if the cpumask of the rescuer is always
kept synchronized with the pool across cpu hotplugs.
Using generic attach/detach routine will solve the above problems and
results in much simpler code.
tj: Minor description updates.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Currently, the code to attach a new worker to its pool is embedded in
create_worker(). Separating this code out will make the codes clearer
and will allow rescuers to share the code path later.
tj: Description and comment updates.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
manager_mutex is only used to protect the attaching for the pool
and the pool->workers list. It protects the pool->workers and operations
based on this list, such as:
cpu-binding for the workers in the pool->workers
the operations to set/clear WORKER_UNBOUND
So let's rename manager_mutex to attach_mutex to better reflect its
role. This patch is a pure rename.
tj: Minor command and description updates.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
In create_worker(), as pool->worker_ida now uses
ida_simple_get()/ida_simple_put() and doesn't require external
synchronization, it doesn't need manager_mutex.
struct worker allocation and kthread allocation are not visible by any
one before attached, so they don't need manager_mutex either.
The above operations are before the attaching operation which attaches
the worker to the pool. Between attaching and starting the worker, the
worker is already attached to the pool, so the cpu hotplug will handle
cpu-binding for the worker correctly and we don't need the
manager_mutex after attaching.
The conclusion is that only the attaching operation needs manager_mutex,
so we narrow the protection section of manager_mutex in create_worker().
Some comments about manager_mutex are removed, because we will rename
it to attach_mutex and add worker_attach_to_pool() later which will be
self-explanatory.
tj: Minor description updates.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
We no longer iterate workers via worker_idr and worker_idr is used
only for allocating/freeing ID, so we can convert it to worker_ida.
By using ida_simple_get/remove(), worker_ida doesn't require external
synchronization, so we don't need manager_mutex to protect it and the
ID-removal code is allowed to be moved out from
worker_detach_from_pool().
In a later patch, worker_detach_from_pool() will be used in rescuers
which don't have IDs, so we move the ID-removal code out from
worker_detach_from_pool() into worker_thread().
tj: Minor description updates.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
worker_idr has the iteration (iterating for attached workers) and
worker ID duties. These two duties don't have to be tied together. We
can separate them and use a list for tracking attached workers and
iteration.
Before this separation, it wasn't possible to add rescuer workers to
worker_idr due to rescuer workers couldn't allocate ID dynamically
because ID-allocation depends on memory-allocation, which rescuer
can't depend on.
After separation, we can easily add the rescuer workers to the list for
iteration without any memory-allocation. It is required when we attach
the rescuer worker to the pool in later patch.
tj: Minor description updates.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Since destroy_worker() doesn't need to sleep nor require manager_mutex,
destroy_worker() can be directly called in the idle timeout
handler, it helps us remove POOL_MANAGE_WORKERS and
maybe_destroy_worker() and simplify the manage_workers()
After POOL_MANAGE_WORKERS is removed, worker_thread() doesn't
need to test whether it needs to manage after processed works.
So we can remove the test branch.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
|
|
worker destruction includes these parts of code:
adjust pool's stats
remove the worker from idle list
detach the worker from the pool
kthread_stop() to wait for the worker's task exit
free the worker struct
We can find out that there is no essential work to do after
kthread_stop(), which means destroy_worker() doesn't need to wait for
the worker's task exit, so we can remove kthread_stop() and free the
worker struct in the worker exiting path.
However, put_unbound_pool() still needs to sync the all the workers'
destruction before destroying the pool; otherwise, the workers may
access to the invalid pool when they are exiting.
So we also move the code of "detach the worker" to the exiting
path and let put_unbound_pool() to sync with this code via
detach_completion.
The code of "detach the worker" is wrapped in a new function
"worker_detach_from_pool()" although worker_detach_from_pool() is only
called once (in worker_thread()) after this patch, but we need to wrap
it for these reasons:
1) The code of "detach the worker" is not short enough to unfold them
in worker_thread().
2) the name of "worker_detach_from_pool()" is self-comment, and we add
some comments above the function.
3) it will be shared by rescuer in later patch which allows rescuer
and normal thread use the same attach/detach frameworks.
The worker id is freed when detaching which happens before the worker
is fully dead, but this id of the dying worker may be re-used for a
new worker, so the dying worker's task name is changed to
"worker/dying" to avoid two or several workers having the same name.
Since "detach the worker" is moved out from destroy_worker(),
destroy_worker() doesn't require manager_mutex, so the
"lockdep_assert_held(&pool->manager_mutex)" in destroy_worker() is
removed, and destroy_worker() is not protected by manager_mutex in
put_unbound_pool().
tj: Minor description updates.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
We used to have the CPU online failure path where a worker is created
and then destroyed without being started. A worker was created for
the CPU coming online and if the online operation failed the created worker
was shut down without being started. But this behavior was changed.
The first worker is created and started at the same time for the CPU coming
online.
It means that we had already ensured in the code that destroy_worker()
destroys only idle workers and we don't want to allow it to destroy
any non-idle worker in the future. Otherwise, it may be buggy and it
may be extremely hard to check. We should force destroy_worker() to
destroy only idle workers explicitly.
Since destroy_worker() destroys only idle workers, this patch does not
change any functionality. We just need to update the comments and the
sanity check code.
In the sanity check code, we will refuse to destroy the worker
if !(worker->flags & WORKER_IDLE).
If the worker entered idle which means it is already started,
so we remove the check of "worker->flags & WORKER_STARTED",
after this removal, WORKER_STARTED is totally unneeded,
so we remove WORKER_STARTED too.
In the comments for create_worker(), "Create a new worker which is bound..."
is changed to "... which is attached..." due to we change the name of this
behavior to attaching.
tj: Minor description / comment updates.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
worker_idr is highly bound to managers and is always/only accessed in manager
lock context. So we don't need pool->lock for it.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Some drivers use the first HID report in the list instead of using an
index. In these cases, validation uses ID 0, which was supposed to mean
"first known report". This fixes the problem, which was causing at least
the lgff family of devices to stop working since hid_validate_values
was being called with ID 0, but the devices used single numbered IDs
for their reports:
0x05, 0x01, /* Usage Page (Desktop), */
0x09, 0x05, /* Usage (Gamepad), */
0xA1, 0x01, /* Collection (Application), */
0xA1, 0x02, /* Collection (Logical), */
0x85, 0x01, /* Report ID (1), */
...
Cc: stable@vger.kernel.org
Reported-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
PHYs other than A may also work in 5 GHz mode.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
CC [M] drivers/net/wireless/ath/ath9k/htc_drv_txrx.o
drivers/net/wireless/ath/ath9k/htc_drv_txrx.c: In function ‘ath9k_rx_prepare’:
drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:1006:2: warning: passing argument 2 of ‘ath9k_htc_err_stat_rx’ from incompatible pointer type [enabled by default]
ath9k_htc_err_stat_rx(priv, &rx_stats);
^
In file included from drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:17:0:
drivers/net/wireless/ath/ath9k/htc.h:380:20: note: expected ‘struct ath_htc_rx_status *’ but argument is of type ‘struct ath_rx_status *’
static inline void ath9k_htc_err_stat_rx(struct ath9k_htc_priv *priv,
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
This cleans code a bit and allows adding support for more devices.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
The comments in i915_reg.h aren't proper kernel-doc comments, so replace
the magic /** with just /*
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Just fix missing ">" in the email.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
|
Commit f9c78b2be2ca moved bio.c from fs/ to block/, but didn't
update the docbook location. Fix that up.
Signed-off-by: Jens Axboe <axboe@fb.com>
|
