aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-01-06ARM: shmobile: r8a7790: Fix I2C controller namesValentine Barshak
This fixes the issue introduced by the following commit: b448c904f5058b6c "ARM: shmobile: r8a7790: add I2C support" The R8A7790 is an R-Car Gen2 SoC. The clock division factor (CDF) width is 3 bits on Gen2 as opposed to 2 bits on Gen1. Fix the device names for R8A7790 SoC to make the R-Car I2C driver configure the hardware properly. Changes in V2: * rebased on top of the latest branch; * capitalized ARM in the subject line; * noted the commit that caused the issue in the log. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24arm: shmobile: r7s72100: add i2c clocksWolfram Sang
Tested with RIIC2 on a genmai board. Others untested but hopefully trivial enough to be added. Signed-off-by: Wolfram Sang <wsa@sang-engineering.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7791: Don't set plat_sci_port scbrr_algo_id fieldLaurent Pinchart
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7779: Don't set plat_sci_port scbrr_algo_id fieldLaurent Pinchart
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7790: Don't set plat_sci_port scbrr_algo_id fieldLaurent Pinchart
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7740: Don't set plat_sci_port scbrr_algo_id fieldLaurent Pinchart
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a73a4: Don't set plat_sci_port scbrr_algo_id fieldLaurent Pinchart
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7778: Don't set plat_sci_port scbrr_algo_id fieldLaurent Pinchart
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r7s72100: Don't set plat_sci_port scbrr_algo_id fieldLaurent Pinchart
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: sh73a0: Don't set plat_sci_port scbrr_algo_id fieldLaurent Pinchart
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7790: Declare SCIF register base and IRQ as resourcesLaurent Pinchart
Passing the register base address and IRQ through platform data is deprecated. Use resources instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7791: Declare SCIF register base and IRQ as resourcesLaurent Pinchart
Passing the register base address and IRQ through platform data is deprecated. Use resources instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7778: Declare SCIF register base and IRQ as resourcesLaurent Pinchart
Passing the register base address and IRQ through platform data is deprecated. Use resources instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: sh7372: Don't set plat_sci_port scbrr_algo_id fieldLaurent Pinchart
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7779: Declare SCIF register base and IRQ as resourcesLaurent Pinchart
Passing the register base address and IRQ through platform data is deprecated. Use resources instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7740: Declare SCIF register base and IRQ as resourcesLaurent Pinchart
Passing the register base address and IRQ through platform data is deprecated. Use resources instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a73a4: Declare SCIF register base and IRQ as resourcesLaurent Pinchart
Passing the register base address and IRQ through platform data is deprecated. Use resources instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r7s72100: Declare SCIF register base and IRQ as resourcesLaurent Pinchart
Passing the register base address and IRQ through platform data is deprecated. Use resources instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: sh73a0: Declare SCIF register base and IRQ as resourcesLaurent Pinchart
Passing the register base address and IRQ through platform data is deprecated. Use resources instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: sh7372: Declare SCIF register base and IRQ as resourcesLaurent Pinchart
Passing the register base address and IRQ through platform data is deprecated. Use resources instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7790: Don't define SCIF platform data in an arrayLaurent Pinchart
The SCIF driver is transitioning to platform resources. Board code will thus need to define an array of resources for each SCIF device. This is incompatible with the macro-based SCIF platform data definition as an array. Rework the macro to define platform data as individual structures. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7791: Don't define SCIF platform data in an arrayLaurent Pinchart
The SCIF driver is transitioning to platform resources. Board code will thus need to define an array of resources for each SCIF device. This is incompatible with the macro-based SCIF platform data definition as an array. Rework the macro to define platform data as individual structures. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7778: Don't define SCIF platform data in an arrayLaurent Pinchart
The SCIF driver is transitioning to platform resources. Board code will thus need to define an array of resources for each SCIF device. This is incompatible with the macro-based SCIF platform data definition as an array. Rework the macro to define platform data as individual structures. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r7s72100: Don't define SCIF platform data in an arrayLaurent Pinchart
The SCIF driver is transitioning to platform resources. Board code will thus need to define an array of resources for each SCIF device. This is incompatible with the macro-based SCIF platform data definition as an array. Rework the macro to define platform data as individual structures. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a73a4: Don't define SCIF platform data in an arrayLaurent Pinchart
The SCIF driver is transitioning to platform resources. Board code will thus need to define an array of resources for each SCIF device. This is incompatible with the macro-based SCIF platform data definition as an array. Rework the macro to define platform data as individual structures. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7779: Use macros to declare SCIF devicesLaurent Pinchart
Replace copy-n-paste SCIF platform data and device declaration with a macro. This reduces the amount of code and improves readability. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7740: Use macros to declare SCIF devicesLaurent Pinchart
Replace copy-n-paste SCIF platform data and device declaration with a macro. This reduces the amount of code and improves readability. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: sh73a0: Use macros to declare SCIF devicesLaurent Pinchart
Replace copy-n-paste SCIF platform data and device declaration with a macro. This reduces the amount of code and improves readability. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: sh7372: Use macros to declare SCIF devicesLaurent Pinchart
Replace copy-n-paste SCIF platform data and device declaration with a macro. This reduces the amount of code and improves readability. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7778: add sound SCU clock supportKuninori Morimoto
This is needed to use SRC (= Sampling Rate Converter) Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24Merge branch 'sh-sci' into soc3-baseSimon Horman
2013-12-24serial: sh-sci: Rework baud rate calculationLaurent Pinchart
Computing the baud rate register value requires knowledge of the hardware sampling rate. This information is currently encoded in a baud rate calculation algorithm ID passed through platform data. However, it can be derived from the port type directly in most cases. Compute the sampling rate internally in the driver if the baud rate calculation algorithm ID isn't specified, and allow platforms to override the sampling rate through platform data in special cases (this is only required for SCIFA ports on sh7723 and sh7724, the reason needs to be investigated). Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24serial: sh-sci: Compute overrun_bit without using baud rate algoLaurent Pinchart
The overrun bit index is a property of the hardware. It's currently computed based on a different and unrelated hardware property, the baud rate calculation algorithm. Compute it using hardware identification information only. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24serial: sh-sci: Remove unused GPIO request codeLaurent Pinchart
The driver requests at initialization time GPIOs passed through platform data. No platform makes use of this feature, remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24serial: sh-sci: Move overrun_bit and error_mask fields out of pdataLaurent Pinchart
None of the fields is ever set by board code, and both of them are set in the driver at probe time. Move them out of struct plat_sci_port to struct sci_port. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24serial: sh-sci: Support resources passed through platform resourcesLaurent Pinchart
Memory and IRQ resources are currently passed to the driver through platform data. Support passing them through the standard platform resources mechanism instead. This deprecates platform data resources. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24serial: sh-sci: Don't check IRQ in verify port operationLaurent Pinchart
The IRQ number can't be modified by the user as the port is fixed. There's no need to check the new IRQ number as it will be ignored by the core. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24serial: sh-sci: Set the UPF_FIXED_PORT flagLaurent Pinchart
The base address, IRQ and baud rate generator parent clock rate can't be changed by userspace. Mark the port as fixed. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24serial: sh-sci: Remove duplicate interrupt check in verify port opLaurent Pinchart
The driver checks if the interrupt number is greater than nr_irqs and returns an error in that case. The same check is already performed by the caller, remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24serial: sh-sci: Simplify baud rate calculation algorithmsLaurent Pinchart
Rewrite the baud rate register value calculations in easier to read forms. The computed value isn't modified. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24serial: sh-sci: Remove baud rate calculation algorithm 5Laurent Pinchart
The algorithm isn't used, remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24serial: sh-sci: Sort headers alphabeticallyLaurent Pinchart
This helps locating duplicates. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-19arm: shmobile: clks: remove duplicated clock from r7s72100Wolfram Sang
Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-19ARM: shmobile: koelsch: Conditionally select MICREL_PHYSimon Horman
The koelsch board uses has an SH ethernet controller which uses a Micrel phy. Select MICREL_PHY for koelsch if SH_ETH is enabled to make use of the Micrel-specific phy driver rather than relying on the generic phy driver. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-19ARM: shmobile: rcar-gen2: Initialize CCF before clock sourcesLaurent Pinchart
When CONFIG_COMMON_CLOCK is enabled, call rcar_gen2_clocks_init() in the timer init function to initialize the common clock framework before initializing the clock sources. This will take care of clock initialization when the r8a779[01] boards will be switched to multiplatform kernels. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-19ARM: shmobile: r8a7791: Add clock index macros for DT sourcesLaurent Pinchart
Add macros usable by device tree sources to reference r8a7791 clocks by index. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-19ARM: shmobile: r8a7790: Add clock index macros for DT sourcesLaurent Pinchart
Add macros usable by device tree sources to reference r8a7790 clocks by index. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-14ARM: shmobile: Add select MIGHT_HAVE_PCI for PCI-AHB bridge codeBen Dooks
The PCI sub-system is not enabled by default on ARM and on certain Renesas devices the build does not select it. This means that there are configurations that do not allow the AHB-PCI bridge used for the USB sub-systems to be built. For the R8A7790, R8A7791 and EMEV-2 select MIGHT_HAVE_PCI to allow the PCI drivers to be built. Also select MIGHT_HAVE_PCI for the multi-config where there may be many Reneasas devices selected. Reviewed-by: Ian Molton <ian.molton@codethink.co.uk> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-14serial: sh-sci: Convert to clk_prepare/unprepareLaurent Pinchart
Turn clk_enable() and clk_disable() calls into clk_prepare_enable() and clk_disable_unprepare() to get ready for the migration to the common clock framework. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Magnus Damm <damm@opensource.se> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-14serial: sh-sci: Don't enable/disable port from within break timerLaurent Pinchart
The break timer accesses hardware registers and thus requires the port to be enabled. It currently ensures this by enabling the port at the beginning of the timer handler, and disabling it at the end. However, the enable/disable operations call the runtime PM sync functions, which are not allowed in atomic context. The current situation is thus broken. This change relies on non-atomic code to enable/disable the port. The break timer will only be started from the IRQ handler, which already runs with the port enabled. We just need to ensure that the port won't be disabled with the timer running, and that's easily done by just cancelling the timer in the port disable function. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Magnus Damm <damm@opensource.se> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2025-08-09 01:20:55 +0000