aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-06-17ARM: shmobile: Remove AP4EVB board supportMagnus Damm
Remove board support for the sh7372 based AP4EVB board The sh7372 SoC support code is still kept around since it is in use by the Mackerel board which is basically a more recent board where the design is based on AP4EVB. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17ARM: shmobile: Remove mach/memory.hMagnus Damm
Remove mach-shmobile memory.h since it is no longer needed. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17ARM: shmobile: Remove MEMORY_START/SIZEMagnus Damm
Remove CONFIG_MEMORY_START and CONFIG_MEMORY_SIZE from mach-shmobile. Boards should use DT to specify their memory setup. Boards that still not support DT may pass ATAGS with memory information from the boot loader. If those ATAGS turn out to be incorrect then appended DTB with memory information should be used as a workaround. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17ARM: shmobile: Enable ARM_PATCH_PHYS_VIRTMagnus Damm
Adjust mach-shmobile to add a select for CONFIG_ARM_PATCH_PHYS_VIRT and at the same time remove NEED_MACH_MEMORY_H. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17ARM: shmobile: Remove old SCU boot codeMagnus Damm
Remove shmobile_secondary_vector_scu now when all SCU enabled SMP platforms instead make use of shmobile_boot_scu. This removes two inline virtual to physical address conversions. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17ARM: shmobile: EMEV2 SMP with SCU boot fn and argsMagnus Damm
Let EMEV2 make use of shmobile_boot_fn and shmobile_boot_arg together with shmobile_boot_scu and the SCU base address. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17ARM: shmobile: sh73a0 SMP with SCU boot fn and argsMagnus Damm
Let sh73a0 make use of shmobile_boot_fn and shmobile_boot_arg together with shmobile_boot_scu and the SCU base address. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17ARM: shmobile: r8a7779 SMP with SCU boot fn and argsMagnus Damm
Let r8a7779 make use of shmobile_boot_fn and shmobile_boot_arg together with shmobile_boot_scu and the SCU base address. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17ARM: shmobile: Add SCU boot function using argumentMagnus Damm
Add a shmoible_boot_scu function that assumes that the base address of the SCU is passed in r0. This code is free from inline virtual to physical address conversion. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17ARM: shmobile: Add SMP boot function and argumentMagnus Damm
Add code for mach-shmobile to allow specifying boot function and argument. Will initially be used for SMP together with SCU but may in the future also be used for deep sleep resume. This patch removes one inline virtual to physical address conversion. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17ARM: shmobile: Rework sh7372 sleep code to use virt_to_phys()Magnus Damm
Instead of having a hard coded virt-to-phys address conversion code in sleep-sh7372.S, rework the code to do the conversion in C using virt_to_phys(). This removes the need for PLAT_PHYS_OFFSET which in turn is needed for ARCH_MULTIPLATFORM. Signed-off-by: Magnus Damm <damm@opensource.se> [horms+renesas@verge.net.au: squashed in build fix posted as "ARM: shmobile: sh7372 build fix for SUSPEND=n && CPU_IDLE=n"] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-12ARM: shmobile: Remove romImage CONFIG_MEMORY_STARTMagnus Damm
Instead of relying on CONFIG_MEMORY_START for memory base address, let each romImage board header file specify this information. This is reworks code not to rely on CONFIG_MEMORY_START which in turn is needed for ARCH_MULTIPLATFORM. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-12ARM: shmobile: Let romImage rely on default ATAGSMagnus Damm
Remove the ATAGS data structure from head-shmobile.S since a default ATAGS is already provided by the code in arch/arm/kernel/atags_parser.c. Passing a NULL as ATAGS is valid. For actual hardware specific setup the fixup callback in the board code may be used. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-12ARM: shmobile: uImage load address reworkMagnus Damm
This is V2 of the mach-shmobile uImage load address rework patch. Rework the mach-shmobile uImage load address calculation by storing the per-board load addresses in Makefile.boot. This removes the CONFIG_MEMORY_START dependency from Makefile.boot, and it also makes it possible to create safe kernel images that boot on multiple boards. This is one of several series of code that reworks code not to rely on CONFIG_MEMORY_START/SIZE which in turn is needed for ARCH_MULTIPLATFORM. Signed-off-by: Magnus Damm <damm@opensource.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: marzen: Use RCAR_GP_PIN macroLaurent Pinchart
Replace hardcoded pin numbers with the RCAR_GP_PIN macro to make the code match the documentation. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: lager: Initialize pinmuxLaurent Pinchart
Initialize r8a7790 pinmuxing and register mappings for the two debug serial ports. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: bockw: add pinctrl supportKuninori Morimoto
SCIF0 support as 1st step Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: kzm9g: tidyup FSI pinctrlKuninori Morimoto
sh73a0 needs "sh_fsi2", not "sh_fsi2.0" Tested-by: Hiep Cao Minh <cm-hiep@jinso.co.jp> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7740 pinmux platform device cleanupMagnus Damm
Use DEFINE_RES_MEM() and platform_device_register_simple() to save a couple of lines of code. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7790: Configure R-Car GPIO for IRQ_TYPE_EDGE_BOTHSimon Horman
"gpio-rcar: Support IRQ_TYPE_EDGE_BOTH" adds support to the R-Car GPIO driver for IRQ_TYPE_EDGE_BOTH. As hardware support for this feature is not universal for all SoCs a flag, has_both_edge_trigger, has been added to the platform data of the driver to allow this feature to be enabled. As the r8a7790 SoC hardware supports this feature enable it. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05pinctrl: sh-pfc: r8a7779: Fix missing MOD_SEL2 entryPhil Edworthy
The list of functions selected by the MOD_SEL2 register was missing an entry. This caused all entries after this to modify the MOD_SEL2 register incorrectly. This bug showed up when selecting i2c2_c pins on the Renesas Hurricane board. This bug has been present since pinmux support was added for the r8a7779 SoC by 881023d28b465eb457067dc8bbca0f24d8b34279 ("sh-pfc: Add r8a7779 pinmux support") in v3.8-rc4. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05Revert "ARM: shmobile: Disallow PINCTRL without GPIOLIB"Laurent Pinchart
GPIOLIB dependency handling was added to the PINCTRL core by commit 2afe8229687ec24cbc07e78449a588bb8b68f858 Author: Haojian Zhuang <haojian.zhuang@linaro.org> Date: Thu Mar 28 07:34:19 2013 +0800 pinctrl: core: add dependence of GPIOLIB There is not need to handle that dependency at the SH Mobile level anymore. Revert commit 6722f6cb763203cab775297b6e9d00834af0d6d7 Author: Magnus Damm <damm@opensource.se> Date: Mon Mar 18 22:58:18 2013 +0900 ARM: shmobile: Disallow PINCTRL without GPIOLIB Modify mach-shmobile to only select PINCTRL in case of ARCH_WANT_OPTIONAL_GPIOLIB is set. This fixes a build error triggered when adding a new SoC lacking GPIO software support (ARCH_WANT_OPTIONAL_GPIOLIB=n): Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05pinctrl: r8a7790: add pinmux data for MMCIF and SDHI interfacesGuennadi Liakhovetski
This patch adds pinmux groups and functions for the two MMCIF and four SDHI interfaces on r8a73a4 (APE6). Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05sh-pfc: r8a7778: add MMCIF pin groupsKuninori Morimoto
Add MMCIF CLK/CMD/DATA groups to R8A7778 PFC driver. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05sh-pfc: r8a7778: add HSPI pin groupsKuninori Morimoto
Add HSPI CLK/CS/RX/TX pin groups to R8A7778 PFC driver. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05sh-pfc: r8a7778: add I2C pin groupsKuninori Morimoto
Add I2C SDA/SCL pin groups to R8A7778 PFC driver. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05pinctrl: sh-pfc: fix a typo in pfc-r8a7790Guennadi Liakhovetski
Fix multiple occurrences of the "RESEVED" typo. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05pinctrl: sh-pfc: fix r8a7790 Function Select register tablesGuennadi Liakhovetski
Fix several errors in Peripheral Function Select register tables for r8a7790, which prevent various function pins from being correctly configured. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05sh-pfc: r8a7778: fixup IRQ1A settingsKuninori Morimoto
IP2[31] func2 is IRQ1A, not IRQ3A Reported-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05sh-pfc: r8a7779: add Ether pin groupsSergei Shtylyov
Add Ether RMII/LINK/MAGIC pin groups to R8A7779 PFC driver. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Laurent Pinchart<laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05sh-pfc: r8a7778: add Ether pin groupsSergei Shtylyov
Add Ether RMII/LINK/MAGIC pin groups to R8A7778 PFC driver. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Laurent Pinchart<laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05sh-pfc: r8a7778: add VIN pin groupsVladimir Barinov
Add VIN DATA[0:8]/CLK/HSYNC/VSYNC pin groups to R8A7778 PFC driver. While at it, add SH_PFC_MUX8() macro for 8-bit data busses. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> [Sergei: updated the copyrights, added SH_PFC_MUX8() macro for 8-bit data bus, made use of SH_PFC_*() macros to define the pin groups.] Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05sh-pfc: sh73a0: Remove function GPIOsLaurent Pinchart
No sh73a0 platform use the function GPIOs API. Remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05sh-pfc: r8a7790: Add TPU pin groups and functionsLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05sh-pfc: r8a7740: Add TPU pin groups and functionsLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05sh-pfc: sh73a0: Add TPU pin groups and functionsLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05sh-pfc: r8a7778: add USB pin groupsSergei Shtylyov
Add USB0/1 PENC/USB_OVC pin groups to R8A7778 PFC driver. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: kzm9g-reference: Remove the VCCQ MC0 function GPIOLaurent Pinchart
The VCCQ MC0 power gate is now controlled by a regulator registered by the PFC driver. Remove the corresponding function GPIO. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: kzm9g: Remove the VCCQ MC0 function GPIOLaurent Pinchart
The VCCQ MC0 power gate is now controlled by a regulator registered by the PFC driver. Remove the corresponding function GPIO. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05sh-pfc: sh73a0: Add VCCQ MC0 regulatorLaurent Pinchart
The sh73a0 has an internal power gate on the VCCQ power supply for the SDHI0 device that is controlled (for some strange reason) by a bit in a PFC register. This feature should be exposed as a regulator. As the same register is also used for pin control purposes there is no way to achieve atomic read/write sequences with a separate regulator driver. We thus need to implement the regulator here. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05sh-pfc: Add support for SoC-specific initializationLaurent Pinchart
Add two optional init and exit SoC operations and call them from the core at probe and remove time. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7779 pinmux platform device cleanupMagnus Damm
Use DEFINE_RES_MEM() to save a couple of lines of code. Signed-off-by: Magnus Damm <damm@opensource.se> [lp: Don't declare r8a7779_pfc_resources as const] Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7790: Remove all GPIOsLaurent Pinchart
Function GPIOs are not used anymore, and all code use the GPIO numbers directly. Remove the GPIOs enumeration. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7790: Register GPIO devicesLaurent Pinchart
Move GPIOs handling from the PFC device to separate GPIO devices. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7778: add GPIO supportKuninori Morimoto
This patch was tested on Bock-W board Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05sh-pfc: r8a7778: tidyup SDHI naming suffixes and sort it alphabeticallyKuninori Morimoto
SDHI 1/2 are the target Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05sh-pfc: r8a7778: Fix outdated GPIO_FN commentsLaurent Pinchart
Function GPIOs have been removed, remove comments that refer to them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05sh-pfc: r8a7740: Add bias (pull-up/down) pinconf supportLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7740: Remove all GPIOsLaurent Pinchart
Function GPIOs are not used anymore, and all code use the GPIO numbers directly. Remove the GPIOs enumeration. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05sh-pfc: r8a7740: Replace GPIO_PORTx enum with GPIO port numbersLaurent Pinchart
The PFC GPIO API implementation moved to using port numbers. Replace all GPIO_PORTx enum usage with the corresponding port number. The GPIO_PORTx enum values are identical to the port number on this platform. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-27 09:02:21 +0000