aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-07-17crypto: sha512_ssse3 - fix byte count to bit count conversionJussi Kivilinna
commit cfe82d4f45c7cc39332a2be7c4c1d3bf279bbd3d upstream. Byte-to-bit-count computation is only partly converted to big-endian and is mixing in CPU-endian values. Problem was noticed by sparce with warning: CHECK arch/x86/crypto/sha512_ssse3_glue.c arch/x86/crypto/sha512_ssse3_glue.c:144:19: warning: restricted __be64 degrades to integer arch/x86/crypto/sha512_ssse3_glue.c:144:17: warning: incorrect type in assignment (different base types) arch/x86/crypto/sha512_ssse3_glue.c:144:17: expected restricted __be64 <noident> arch/x86/crypto/sha512_ssse3_glue.c:144:17: got unsigned long long Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Acked-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17cpufreq: Makefile: fix compilation for davinci platformPrabhakar Lad
commit 5a90af67c2126fe1d04ebccc1f8177e6ca70d3a9 upstream. Since commtit 8a7b1227e303 (cpufreq: davinci: move cpufreq driver to drivers/cpufreq) this added dependancy only for CONFIG_ARCH_DAVINCI_DA850 where as davinci_cpufreq_init() call is used by all davinci platform. This patch fixes following build error: arch/arm/mach-davinci/built-in.o: In function `davinci_init_late': :(.init.text+0x928): undefined reference to `davinci_cpufreq_init' make: *** [vmlinux] Error 1 Fixes: 8a7b1227e303 (cpufreq: davinci: move cpufreq driver to drivers/cpufreq) Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17powerpc/perf: Clear MMCR2 when enabling PMUJoel Stanley
commit b50a6c584bb47b370f84bfd746770c0bbe7129b7 upstream. On POWER8 when switching to a KVM guest we set bits in MMCR2 to freeze the PMU counters. Aside from on boot they are then never reset, resulting in stuck perf counters for any user in the guest or host. We now set MMCR2 to 0 whenever enabling the PMU, which provides a sane state for perf to use the PMU counters under either the guest or the host. This was manifesting as a bug with ppc64_cpu --frequency: $ sudo ppc64_cpu --frequency WARNING: couldn't run on cpu 0 WARNING: couldn't run on cpu 8 ... WARNING: couldn't run on cpu 144 WARNING: couldn't run on cpu 152 min: 18446744073.710 GHz (cpu -1) max: 0.000 GHz (cpu -1) avg: 0.000 GHz The command uses a perf counter to measure CPU cycles over a fixed amount of time, in order to approximate the frequency of the machine. The counters were returning zero once a guest was started, regardless of weather it was still running or had been shut down. By dumping the value of MMCR2, it was observed that once a guest is running MMCR2 is set to 1s - which stops counters from running: $ sudo sh -c 'echo p > /proc/sysrq-trigger' CPU: 0 PMU registers, ppmu = POWER8 n_counters = 6 PMC1: 5b635e38 PMC2: 00000000 PMC3: 00000000 PMC4: 00000000 PMC5: 1bf5a646 PMC6: 5793d378 PMC7: deadbeef PMC8: deadbeef MMCR0: 0000000080000000 MMCR1: 000000001e000000 MMCRA: 0000040000000000 MMCR2: fffffffffffffc00 EBBHR: 0000000000000000 EBBRR: 0000000000000000 BESCR: 0000000000000000 SIAR: 00000000000a51cc SDAR: c00000000fc40000 SIER: 0000000001000000 This is done unconditionally in book3s_hv_interrupts.S upon entering the guest, and the original value is only save/restored if the host has indicated it was using the PMU. This is okay, however the user of the PMU needs to ensure that it is in a defined state when it starts using it. Fixes: e05b9b9e5c10 ("powerpc/perf: Power8 PMU support") Signed-off-by: Joel Stanley <joel@jms.id.au> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17powerpc/perf: Add PPMU_ARCH_207S defineJoel Stanley
commit 4d9690dd56b0d18f2af8a9d4a279cb205aae3345 upstream. Instead of separate bits for every POWER8 PMU feature, have a single one for v2.07 of the architecture. This saves us adding a MMCR2 define for a future patch. Signed-off-by: Joel Stanley <joel@jms.id.au> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17powerpc/perf: Never program book3s PMCs with values >= 0x80000000Anton Blanchard
commit f56029410a13cae3652d1f34788045c40a13ffc7 upstream. We are seeing a lot of PMU warnings on POWER8: Can't find PMC that caused IRQ Looking closer, the active PMC is 0 at this point and we took a PMU exception on the transition from negative to 0. Some versions of POWER8 have an issue where they edge detect and not level detect PMC overflows. A number of places program the PMC with (0x80000000 - period_left), where period_left can be negative. We can either fix all of these or just ensure that period_left is always >= 1. This patch takes the second option. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17ACPI / resources: only reject zero length resources based at address zeroAndy Whitcroft
commit 867f9d463b82462793ea4610e748be0b04b37fc7 upstream. The recently merged change (in v3.14-rc6) to ACPI resource detection (below) causes all zero length ACPI resources to be elided from the table: commit b355cee88e3b1a193f0e9a81db810f6f83ad728b Author: Zhang Rui <rui.zhang@intel.com> Date: Thu Feb 27 11:37:15 2014 +0800 ACPI / resources: ignore invalid ACPI device resources This change has caused a regression in (at least) serial port detection for a number of machines (see LP#1313981 [1]). These seem to represent their IO regions (presumably incorrectly) as a zero length region. Reverting the above commit restores these serial devices. Only elide zero length resources which lie at address 0. Fixes: b355cee88e3b (ACPI / resources: ignore invalid ACPI device resources) Signed-off-by: Andy Whitcroft <apw@canonical.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17hwmon: (adm1021) Fix cache problem when writing temperature limitsAxel Lin
commit c024044d4da2c9c3b32933b4235df1e409293b84 upstream. The module test script for the adm1021 driver exposes a cache problem when writing temperature limits. temp_min and temp_max are expected to be stored in milli-degrees C but are stored in degrees C. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17hwmon: (adm1029) Ensure the fan_div cache is updated in set_fan_divAxel Lin
commit 1035a9e3e9c76b64a860a774f5b867d28d34acc2 upstream. Writing to fanX_div does not clear the cache. As a result, reading from fanX_div may return the old value for up to two seconds after writing a new value. This patch ensures the fan_div cache is updated in set_fan_div(). Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17hwmon: (adm1031) Fix writes to limit registersGuenter Roeck
commit 145e74a4e5022225adb84f4e5d4fff7938475c35 upstream. Upper limit for write operations to temperature limit registers was clamped to a fractional value. However, limit registers do not support fractional values. As a result, upper limits of 127.5 degrees C or higher resulted in a rounded limit of 128 degrees C. Since limit registers are signed, this was stored as -128 degrees C. Clamp limits to (-55, +127) degrees C to solve the problem. Value on writes to auto_temp[12]_min and auto_temp[12]_max were not clamped at all, but masked. As a result, out-of-range writes resulted in a more or less arbitrary limit. Clamp those attributes to (0, 127) degrees C for more predictable results. Cc: Axel Lin <axel.lin@ingics.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17hwmon: (amc6821) Fix permissions for temp2_inputAxel Lin
commit df86754b746e9a0ff6f863f690b1c01d408e3cdc upstream. temp2_input should not be writable, fix it. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17workqueue: zero cpumask of wq_numa_possible_cpumask on initYasuaki Ishimatsu
commit 5a6024f1604eef119cf3a6fa413fe0261a81a8f3 upstream. When hot-adding and onlining CPU, kernel panic occurs, showing following call trace. BUG: unable to handle kernel paging request at 0000000000001d08 IP: [<ffffffff8114acfd>] __alloc_pages_nodemask+0x9d/0xb10 PGD 0 Oops: 0000 [#1] SMP ... Call Trace: [<ffffffff812b8745>] ? cpumask_next_and+0x35/0x50 [<ffffffff810a3283>] ? find_busiest_group+0x113/0x8f0 [<ffffffff81193bc9>] ? deactivate_slab+0x349/0x3c0 [<ffffffff811926f1>] new_slab+0x91/0x300 [<ffffffff815de95a>] __slab_alloc+0x2bb/0x482 [<ffffffff8105bc1c>] ? copy_process.part.25+0xfc/0x14c0 [<ffffffff810a3c78>] ? load_balance+0x218/0x890 [<ffffffff8101a679>] ? sched_clock+0x9/0x10 [<ffffffff81105ba9>] ? trace_clock_local+0x9/0x10 [<ffffffff81193d1c>] kmem_cache_alloc_node+0x8c/0x200 [<ffffffff8105bc1c>] copy_process.part.25+0xfc/0x14c0 [<ffffffff81114d0d>] ? trace_buffer_unlock_commit+0x4d/0x60 [<ffffffff81085a80>] ? kthread_create_on_node+0x140/0x140 [<ffffffff8105d0ec>] do_fork+0xbc/0x360 [<ffffffff8105d3b6>] kernel_thread+0x26/0x30 [<ffffffff81086652>] kthreadd+0x2c2/0x300 [<ffffffff81086390>] ? kthread_create_on_cpu+0x60/0x60 [<ffffffff815f20ec>] ret_from_fork+0x7c/0xb0 [<ffffffff81086390>] ? kthread_create_on_cpu+0x60/0x60 In my investigation, I found the root cause is wq_numa_possible_cpumask. All entries of wq_numa_possible_cpumask is allocated by alloc_cpumask_var_node(). And these entries are used without initializing. So these entries have wrong value. When hot-adding and onlining CPU, wq_update_unbound_numa() is called. wq_update_unbound_numa() calls alloc_unbound_pwq(). And alloc_unbound_pwq() calls get_unbound_pool(). In get_unbound_pool(), worker_pool->node is set as follow: 3592 /* if cpumask is contained inside a NUMA node, we belong to that node */ 3593 if (wq_numa_enabled) { 3594 for_each_node(node) { 3595 if (cpumask_subset(pool->attrs->cpumask, 3596 wq_numa_possible_cpumask[node])) { 3597 pool->node = node; 3598 break; 3599 } 3600 } 3601 } But wq_numa_possible_cpumask[node] does not have correct cpumask. So, wrong node is selected. As a result, kernel panic occurs. By this patch, all entries of wq_numa_possible_cpumask are allocated by zalloc_cpumask_var_node to initialize them. And the panic disappeared. Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: bce903809ab3 ("workqueue: add wq_numa_tbl_len and wq_numa_possible_cpumask[]") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17cpuset,mempolicy: fix sleeping function called from invalid contextGu Zheng
commit 391acf970d21219a2a5446282d3b20eace0c0d7a upstream. When runing with the kernel(3.15-rc7+), the follow bug occurs: [ 9969.258987] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:586 [ 9969.359906] in_atomic(): 1, irqs_disabled(): 0, pid: 160655, name: python [ 9969.441175] INFO: lockdep is turned off. [ 9969.488184] CPU: 26 PID: 160655 Comm: python Tainted: G A 3.15.0-rc7+ #85 [ 9969.581032] Hardware name: FUJITSU-SV PRIMEQUEST 1800E/SB, BIOS PRIMEQUEST 1000 Series BIOS Version 1.39 11/16/2012 [ 9969.706052] ffffffff81a20e60 ffff8803e941fbd0 ffffffff8162f523 ffff8803e941fd18 [ 9969.795323] ffff8803e941fbe0 ffffffff8109995a ffff8803e941fc58 ffffffff81633e6c [ 9969.884710] ffffffff811ba5dc ffff880405c6b480 ffff88041fdd90a0 0000000000002000 [ 9969.974071] Call Trace: [ 9970.003403] [<ffffffff8162f523>] dump_stack+0x4d/0x66 [ 9970.065074] [<ffffffff8109995a>] __might_sleep+0xfa/0x130 [ 9970.130743] [<ffffffff81633e6c>] mutex_lock_nested+0x3c/0x4f0 [ 9970.200638] [<ffffffff811ba5dc>] ? kmem_cache_alloc+0x1bc/0x210 [ 9970.272610] [<ffffffff81105807>] cpuset_mems_allowed+0x27/0x140 [ 9970.344584] [<ffffffff811b1303>] ? __mpol_dup+0x63/0x150 [ 9970.409282] [<ffffffff811b1385>] __mpol_dup+0xe5/0x150 [ 9970.471897] [<ffffffff811b1303>] ? __mpol_dup+0x63/0x150 [ 9970.536585] [<ffffffff81068c86>] ? copy_process.part.23+0x606/0x1d40 [ 9970.613763] [<ffffffff810bf28d>] ? trace_hardirqs_on+0xd/0x10 [ 9970.683660] [<ffffffff810ddddf>] ? monotonic_to_bootbased+0x2f/0x50 [ 9970.759795] [<ffffffff81068cf0>] copy_process.part.23+0x670/0x1d40 [ 9970.834885] [<ffffffff8106a598>] do_fork+0xd8/0x380 [ 9970.894375] [<ffffffff81110e4c>] ? __audit_syscall_entry+0x9c/0xf0 [ 9970.969470] [<ffffffff8106a8c6>] SyS_clone+0x16/0x20 [ 9971.030011] [<ffffffff81642009>] stub_clone+0x69/0x90 [ 9971.091573] [<ffffffff81641c29>] ? system_call_fastpath+0x16/0x1b The cause is that cpuset_mems_allowed() try to take mutex_lock(&callback_mutex) under the rcu_read_lock(which was hold in __mpol_dup()). And in cpuset_mems_allowed(), the access to cpuset is under rcu_read_lock, so in __mpol_dup, we can reduce the rcu_read_lock protection region to protect the access to cpuset only in current_cpuset_is_being_rebound(). So that we can avoid this bug. This patch is a temporary solution that just addresses the bug mentioned above, can not fix the long-standing issue about cpuset.mems rebinding on fork(): "When the forker's task_struct is duplicated (which includes ->mems_allowed) and it races with an update to cpuset_being_rebound in update_tasks_nodemask() then the task's mems_allowed doesn't get updated. And the child task's mems_allowed can be wrong if the cpuset's nodemask changes before the child has been added to the cgroup's tasklist." Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17workqueue: fix dev_set_uevent_suppress() imbalanceMaxime Bizon
commit bddbceb688c6d0decaabc7884fede319d02f96c8 upstream. Uevents are suppressed during attributes registration, but never restored, so kobject_uevent() does nothing. Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: 226223ab3c4118ddd10688cc2c131135848371ab Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17parisc: add serial ports of C8000/1GHz machine to hardware databaseHelge Deller
commit eadcc7208a2237016be7bdff4551ba7614da85c8 upstream. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17USB: serial: ftdi_sio: Add Infineon TriboardMichal Sojka
commit d8279a40e50ad55539780aa617a32a53d7f0953e upstream. This adds support for Infineon TriBoard TC1798 [1]. Only interface 1 is used as serial line (see [2], Figure 8-6). [1] http://www.infineon.com/cms/de/product/microcontroller/development-tools-software-and-kits/tricore-tm-development-tools-software-and-kits/starterkits-and-evaluation-boards/starter-kit-tc1798/channel.html?channel=db3a304333b8a7ca0133cfa3d73e4268 [2] http://www.infineon.com/dgdl/TriBoardManual-TC1798-V10.pdf?folderId=db3a304412b407950112b409ae7c0343&fileId=db3a304333b8a7ca0133cfae99fe426a Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz> Cc: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17USB: ftdi_sio: Add extra PID.Bert Vermeulen
commit 5a7fbe7e9ea0b1b9d7ffdba64db1faa3a259164c upstream. This patch adds PID 0x0003 to the VID 0x128d (Testo). At least the Testo 435-4 uses this, likely other gear as well. Signed-off-by: Bert Vermeulen <bert@biot.com> Cc: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17USB: cp210x: add support for Corsair usb dongleAndras Kovacs
commit b9326057a3d8447f5d2e74a7b521ccf21add2ec0 upstream. Corsair USB Dongles are shipped with Corsair AXi series PSUs. These are cp210x serial usb devices, so make driver detect these. I have a program, that can get information from these PSUs. Tested with 2 different dongles shipped with Corsair AX860i and AX1200i units. Signed-off-by: Andras Kovacs <andras@sth.sze.hu> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17usb: option: Add ID for Telewell TW-LTE 4G v2Bernd Wachter
commit 3d28bd840b2d3981cd28caf5fe1df38f1344dd60 upstream. Add ID of the Telewell 4G v2 hardware to option driver to get legacy serial interface working Signed-off-by: Bernd Wachter <bernd.wachter@jolla.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09Linux 3.10.48v3.10.48Greg Kroah-Hartman
2014-07-09mm: fix crashes from mbind() merging vmasHugh Dickins
commit d05f0cdcbe6388723f1900c549b4850360545201 upstream. In v2.6.34 commit 9d8cebd4bcd7 ("mm: fix mbind vma merge problem") introduced vma merging to mbind(), but it should have also changed the convention of passing start vma from queue_pages_range() (formerly check_range()) to new_vma_page(): vma merging may have already freed that structure, resulting in BUG at mm/mempolicy.c:1738 and probably worse crashes. Fixes: 9d8cebd4bcd7 ("mm: fix mbind vma merge problem") Reported-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Tested-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Christoph Lameter <cl@linux.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09hugetlb: fix copy_hugetlb_page_range() to handle migration/hwpoisoned entryNaoya Horiguchi
commit 4a705fef986231a3e7a6b1a6d3c37025f021f49f upstream. There's a race between fork() and hugepage migration, as a result we try to "dereference" a swap entry as a normal pte, causing kernel panic. The cause of the problem is that copy_hugetlb_page_range() can't handle "swap entry" family (migration entry and hwpoisoned entry) so let's fix it. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09sym53c8xx_2: Set DID_REQUEUE return code when aborting squeueMikulas Patocka
commit fd1232b214af43a973443aec6a2808f16ee5bf70 upstream. This patch fixes I/O errors with the sym53c8xx_2 driver when the disk returns QUEUE FULL status. When the controller encounters an error (including QUEUE FULL or BUSY status), it aborts all not yet submitted requests in the function sym_dequeue_from_squeue. This function aborts them with DID_SOFT_ERROR. If the disk has full tag queue, the request that caused the overflow is aborted with QUEUE FULL status (and the scsi midlayer properly retries it until it is accepted by the disk), but the sym53c8xx_2 driver aborts the following requests with DID_SOFT_ERROR --- for them, the midlayer does just a few retries and then signals the error up to sd. The result is that disk returning QUEUE FULL causes request failures. The error was reproduced on 53c895 with COMPAQ BD03685A24 disk (rebranded ST336607LC) with command queue 48 or 64 tags. The disk has 64 tags, but under some access patterns it return QUEUE FULL when there are less than 64 pending tags. The SCSI specification allows returning QUEUE FULL anytime and it is up to the host to retry. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: Matthew Wilcox <matthew@wil.cx> Cc: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09drivers/video/fbdev/fb-puv3.c: Add header files for function unifb_mmapZhichuang SUN
commit fbc6c4a13bbfb420eedfdb26a0a859f9c07e8a7b upstream. Function unifb_mmap calls functions which are defined in linux/mm.h and asm/pgtable.h The related error (for unicore32 with unicore32_defconfig): CC drivers/video/fbdev/fb-puv3.o drivers/video/fbdev/fb-puv3.c: In function 'unifb_mmap': drivers/video/fbdev/fb-puv3.c:646: error: implicit declaration of function 'vm_iomap_memory' drivers/video/fbdev/fb-puv3.c:646: error: implicit declaration of function 'pgprot_noncached' Signed-off-by: Zhichuang Sun <sunzc522@gmail.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Joe Perches <joe@perches.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: linux-fbdev@vger.kernel.org Acked-by: Xuetao Guan <gxt@mprc.pku.edu.cn> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09arch/unicore32/mm/alignment.c: include "asm/pgtable.h" to avoid compiling errorChen Gang
commit 1ff38c56cbd095c4c0dfa581a859ba3557830f78 upstream. Need include "asm/pgtable.h" to include "asm-generic/pgtable-nopmd.h", so can let 'pmd_t' defined. The related error with allmodconfig: CC arch/unicore32/mm/alignment.o In file included from arch/unicore32/mm/alignment.c:24: arch/unicore32/include/asm/tlbflush.h:135: error: expected .). before .*. token arch/unicore32/include/asm/tlbflush.h:154: error: expected .). before .*. token In file included from arch/unicore32/mm/alignment.c:27: arch/unicore32/mm/mm.h:15: error: expected .=., .,., .;., .sm. or ._attribute__. before .*. token arch/unicore32/mm/mm.h:20: error: expected .=., .,., .;., .sm. or ._attribute__. before .*. token arch/unicore32/mm/mm.h:25: error: expected .=., .,., .;., .sm. or ._attribute__. before .*. token make[1]: *** [arch/unicore32/mm/alignment.o] Error 1 make: *** [arch/unicore32/mm] Error 2 Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Acked-by: Xuetao Guan <gxt@mprc.pku.edu.cn> Signed-off-by: Xuetao Guan <gxt@mprc.pku.edu.cn> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09ALSA: usb-audio: Prevent printk ratelimiting from spamming kernel log while ↵Sander Eikelenboom
DEBUG not defined commit b7a7723513dc89f83d6df13206df55d4dc26e825 upstream. This (widely used) construction: if(printk_ratelimit()) dev_dbg() Causes the ratelimiting to spam the kernel log with the "callbacks suppressed" message below, even while the dev_dbg it is supposed to rate limit wouldn't print anything because DEBUG is not defined for this device. [ 533.803964] retire_playback_urb: 852 callbacks suppressed [ 538.807930] retire_playback_urb: 852 callbacks suppressed [ 543.811897] retire_playback_urb: 852 callbacks suppressed [ 548.815745] retire_playback_urb: 852 callbacks suppressed [ 553.819826] retire_playback_urb: 852 callbacks suppressed So use dev_dbg_ratelimited() instead of this construction. Signed-off-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09ALSA: usb-audio: Suppress repetitive debug messages from retire_playback_urb()Tim Gardner
commit a5065eb6da55b226661456e6a7435f605df98111 upstream. BugLink: http://bugs.launchpad.net/bugs/1305133 Malfunctioning or slow devices can cause a flood of dmesg SPAM. I've ignored checkpatch.pl complaints about the use of printk_ratelimit() in favour of prior art in sound/usb/pcm.c. WARNING: Prefer printk_ratelimited or pr_<level>_ratelimited to printk_ratelimit + if (printk_ratelimit() && Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: Eldad Zack <eldad@fogrefinery.com> Cc: Daniel Mack <zonque@gmail.com> Cc: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09serial: 8250_dw: Fix LCR workaround regressionJames Hogan
commit 6979f8d28049879e6147767d93ba6732c8bd94f4 upstream. Commit c49436b657d0 (serial: 8250_dw: Improve unwritable LCR workaround) caused a regression. It added a check that the LCR was written properly to detect and workaround the busy quirk, but the behaviour of bit 5 (UART_LCR_SPAR) differs between IP versions 3.00a and 3.14c per the docs. On older versions this caused the check to fail and it would repeatedly force idle and rewrite the LCR register, causing delays and preventing any input from serial being received. This is fixed by masking out UART_LCR_SPAR before making the comparison. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Tim Kryger <tim.kryger@linaro.org> Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Cc: Matt Porter <matt.porter@linaro.org> Cc: Markus Mayer <markus.mayer@linaro.org> Tested-by: Tim Kryger <tim.kryger@linaro.org> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Tested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Wang Nan <wangnan0@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09serial: 8250_dw: Improve unwritable LCR workaroundTim Kryger
commit c49436b657d0a56a6ad90d14a7c3041add7cf64d upstream. When configured with UART_16550_COMPATIBLE=NO or in versions prior to the introduction of this option, the Designware UART will ignore writes to the LCR if the UART is busy. The current workaround saves a copy of the last written LCR and re-writes it in the ISR for a special interrupt that is raised when a write was ignored. Unfortunately, interrupts are typically disabled prior to performing a sequence of register writes that include the LCR so the point at which the retry occurs is too late. An example is serial8250_do_set_termios() where an ignored LCR write results in the baud divisor not being set and instead a garbage character is sent out the transmitter. Furthermore, since serial_port_out() offers no way to indicate failure, a serious effort must be made to ensure that the LCR is actually updated before returning back to the caller. This is difficult, however, as a UART that was busy during the first attempt is likely to still be busy when a subsequent attempt is made unless some extra action is taken. This updated workaround reads back the LCR after each write to confirm that the new value was accepted by the hardware. Should the hardware ignore a write, the TX/RX FIFOs are cleared and the receive buffer read before attempting to rewrite the LCR out of the hope that doing so will force the UART into an idle state. While this may seem unnecessarily aggressive, writes to the LCR are used to change the baud rate, parity, stop bit, or data length so the data that may be lost is likely not important. Admittedly, this is far from ideal but it seems to be the best that can be done given the hardware limitations. Lastly, the revised workaround doesn't touch the LCR in the ISR, so it avoids the possibility of a "serial8250: too much work for irq" lock up. This problem is rare in real situations but can be reproduced easily by wiring up two UARTs and running the following commands. # stty -F /dev/ttyS1 echo # stty -F /dev/ttyS2 echo # cat /dev/ttyS1 & [1] 375 # echo asdf > /dev/ttyS1 asdf [ 27.700000] serial8250: too much work for irq96 [ 27.700000] serial8250: too much work for irq96 [ 27.710000] serial8250: too much work for irq96 [ 27.710000] serial8250: too much work for irq96 [ 27.720000] serial8250: too much work for irq96 [ 27.720000] serial8250: too much work for irq96 [ 27.730000] serial8250: too much work for irq96 [ 27.730000] serial8250: too much work for irq96 [ 27.740000] serial8250: too much work for irq96 Signed-off-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <matt.porter@linaro.org> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> [wangnan: backport to 3.10.43: - adjust context - remove unneeded local var] Signed-off-by: Wang Nan <wangnan0@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09serial: 8250_dw: Report CTS asserted for auto flowTim Kryger
commit 33acbb82695f84e9429c1f7fbdeb4588dea12ffa upstream. When a serial port is configured for RTS/CTS flow control, serial core will disable the transmitter if it observes CTS is de-asserted. This is perfectly reasonable and appropriate when the UART lacks the ability to automatically perform CTS flow control. However, if the UART hardware can manage flow control automatically, it is important that software not get involved. When the DesignWare UART enables 16C750 style auto-RTS/CTS it stops generating interrupts for changes in CTS state so software mostly stays out of the way. However, it does report the true state of CTS in the MSR so software may notice it is de-asserted and respond by improperly disabling the transmitter. Once this happens the transmitter will be blocked forever. To avoid this situation, we simply lie to the 8250 and serial core by reporting that CTS is asserted whenever auto-RTS/CTS mode is enabled. Signed-off-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <matt.porter@linaro.org> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> Cc: Wang Nan <wangnan0@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09mmc: rtsx: add R1-no-CRC mmc command type handleMicky Ching
commit 5027251eced6e34315a52bd841279df957f627bb upstream. a27fbf2f067b0cd ("mmc: add ignorance case for CMD13 CRC error") produced a cmd.flags unhandled in realtek pci host driver. This will make MMC card fail to initialize, this patch is used to handle the new cmd.flags condition and MMC card can be used. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09irqchip: spear_shirq: Fix interrupt offsetThomas Gleixner
commit 4f4366033945419b0c52118c29d3057d7c558765 upstream. The ras3 block on spear320 claims to have 3 interrupts. In fact it has one and 6 reserved interrupts. Account the 6 reserved to this block so it has 7 interrupts total. That matches the datasheet and the device tree entries. Broken since commit 80515a5a(ARM: SPEAr3xx: shirq: simplify and move the shared irq multiplexor to DT). Testing is overrated.... Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20140619212712.872379208@linutronix.de Fixes: 80515a5a2e3c ('ARM: SPEAr3xx: shirq: simplify and move the shared irq multiplexor to DT') Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09md: flush writes before starting a recovery.NeilBrown
commit 133d4527eab8d199a62eee6bd433f0776842df2e upstream. When we write to a degraded array which has a bitmap, we make sure the relevant bit in the bitmap remains set when the write completes (so a 're-add' can quickly rebuilt a temporarily-missing device). If, immediately after such a write starts, we incorporate a spare, commence recovery, and skip over the region where the write is happening (because the 'needs recovery' flag isn't set yet), then that write will not get to the new device. Once the recovery finishes the new device will be trusted, but will have incorrect data, leading to possible corruption. We cannot set the 'needs recovery' flag when we start the write as we do not know easily if the write will be "degraded" or not. That depends on details of the particular raid level and particular write request. This patch fixes a corruption issue of long standing and so it suitable for any -stable kernel. It applied correctly to 3.0 at least and will minor editing to earlier kernels. Reported-by: Bill <billstuff2001@sbcglobal.net> Tested-by: Bill <billstuff2001@sbcglobal.net> Link: http://lkml.kernel.org/r/53A518BB.60709@sbcglobal.net Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09tracing: Remove ftrace_stop/start() from reading the trace fileSteven Rostedt (Red Hat)
commit 099ed151675cd1d2dbeae1dac697975f6a68716d upstream. Disabling reading and writing to the trace file should not be able to disable all function tracing callbacks. There's other users today (like kprobes and perf). Reading a trace file should not stop those from happening. Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09tools: ffs-test: fix header values endianessMichal Nazarewicz
commit f35f71244da6e51db4e1f2c7e318581f498ececf upstream. It appears that no one ever run ffs-test on a big-endian machine, since it used cpu-endianess for fs_count and hs_count fields which should be in little-endian format. Fix by wrapping the numbers in cpu_to_le32. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09nfsd: fix rare symlink decoding bugJ. Bruce Fields
commit 76f47128f9b33af1e96819746550d789054c9664 upstream. An NFS operation that creates a new symlink includes the symlink data, which is xdr-encoded as a length followed by the data plus 0 to 3 bytes of zero-padding as required to reach a 4-byte boundary. The vfs, on the other hand, wants null-terminated data. The simple way to handle this would be by copying the data into a newly allocated buffer with space for the final null. The current nfsd_symlink code tries to be more clever by skipping that step in the (likely) case where the byte following the string is already 0. But that assumes that the byte following the string is ours to look at. In fact, it might be the first byte of a page that we can't read, or of some object that another task might modify. Worse, the NFSv4 code tries to fix the problem by actually writing to that byte. In the NFSv2/v3 cases this actually appears to be safe: - nfs3svc_decode_symlinkargs explicitly null-terminates the data (after first checking its length and copying it to a new page). - NFSv2 limits symlinks to 1k. The buffer holding the rpc request is always at least a page, and the link data (and previous fields) have maximum lengths that prevent the request from reaching the end of a page. In the NFSv4 case the CREATE op is potentially just one part of a long compound so can end up on the end of a page if you're unlucky. The minimal fix here is to copy and null-terminate in the NFSv4 case. The nfsd_symlink() interface here seems too fragile, though. It should really either do the copy itself every time or just require a null-terminated string. Reported-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09iio: of_iio_channel_get_by_name() returns non-null pointers for error legsAdam Thomson
commit a2c12493ed7e63a18cef33a71686d12ffcd6600e upstream. Currently in the inkern.c code for IIO framework, the function of_iio_channel_get_by_name() will return a non-NULL pointer when it cannot find a channel using of_iio_channel_get() and when it tries to search for 'io-channel-ranges' property and fails. This is incorrect behaviour as the function which calls this expects a NULL pointer for failure. This patch rectifies the issue. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09KVM: x86: preserve the high 32-bits of the PAT registerPaolo Bonzini
commit 7cb060a91c0efc5ff94f83c6df3ed705e143cdb9 upstream. KVM does not really do much with the PAT, so this went unnoticed for a long time. It is exposed however if you try to do rdmsr on the PAT register. Reported-by: Valentine Sinitsyn <valentine.sinitsyn@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09KVM: x86: Increase the number of fixed MTRR regs to 10Nadav Amit
commit 682367c494869008eb89ef733f196e99415ae862 upstream. Recent Intel CPUs have 10 variable range MTRRs. Since operating systems sometime make assumptions on CPUs while they ignore capability MSRs, it is better for KVM to be consistent with recent CPUs. Reporting more MTRRs than actually supported has no functional implications. Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09ext4: Fix hole punching for files with indirect blocksJan Kara
commit a93cd4cf86466caa49cfe64607bea7f0bde3f916 upstream. Hole punching code for files with indirect blocks wrongly computed number of blocks which need to be cleared when traversing the indirect block tree. That could result in punching more blocks than actually requested and thus effectively cause a data loss. For example: fallocate -n -p 10240000 4096 will punch the range 10240000 - 12632064 instead of the range 1024000 - 10244096. Fix the calculation. Fixes: 8bad6fc813a3a5300f51369c39d315679fd88c72 Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09ext4: Fix buffer double free in ext4_alloc_branch()Jan Kara
commit c5c7b8ddfbf8cb3b2291e515a34ab1b8982f5a2d upstream. Error recovery in ext4_alloc_branch() calls ext4_forget() even for buffer corresponding to indirect block it did not allocate. This leads to brelse() being called twice for that buffer (once from ext4_forget() and once from cleanup in ext4_ind_map_blocks()) leading to buffer use count misaccounting. Eventually (but often much later because there are other users of the buffer) we will see messages like: VFS: brelse: Trying to free free buffer Another manifestation of this problem is an error: JBD2 unexpected failure: jbd2_journal_revoke: !buffer_revoked(bh); inconsistent data on disk The fix is easy - don't forget buffer we did not allocate. Also add an explanatory comment because the indexing at ext4_alloc_branch() is somewhat subtle. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09CIFS: fix mount failure with broken pathnames when smb3 mount with mapchars ↵Steve French
option commit ce36d9ab3bab06b7b5522f5c8b68fac231b76ffb upstream. When we SMB3 mounted with mapchars (to allow reserved characters : \ / > < * ? via the Unicode Windows to POSIX remap range) empty paths (eg when we open "" to query the root of the SMB3 directory on mount) were not null terminated so we sent garbarge as a path name on empty paths which caused SMB2/SMB2.1/SMB3 mounts to fail when mapchars was specified. mapchars is particularly important since Unix Extensions for SMB3 are not supported (yet) Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09b43: fix frequency reported on G-PHY with /new/ firmwareRafał Miłecki
commit 2fc68eb122c7ea6cd5be1fe7d6650c0beb2f4f40 upstream. Support for firmware rev 508+ was added years ago, but we never noticed it reports channel in a different way for G-PHY devices. Instead of offset from 2400 MHz it simply passes channel id (AKA hw_value). So far it was (most probably) affecting monitor mode users only, but the following recent commit made it noticeable for quite everybody: commit 3afc2167f60a327a2c1e1e2600ef209a3c2b75b7 Author: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Date: Tue Mar 4 16:50:13 2014 +0200 cfg80211/mac80211: ignore signal if the frame was heard on wrong channel Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09arm64: Bug fix in stack alignment exceptionChiaHao
commit 3906c2b53cd23c2ae03e6ce41432c8e7f0a3cbbb upstream. The value of ESR has been stored into x1, and should be directly pass to do_sp_pc_abort function, "MOV x1, x25" is an extra operation and do_sp_pc_abort will get the wrong value of ESR. Signed-off-by: ChiaHao <andy.jhshiu@gmail.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09ARM: OMAP2+: Fix parser-bug in platform muxing codeDavid R. Piegdon
commit c021f241f4fab2bb4fc4120a38a828a03dd3f970 upstream. Fix a parser-bug in the omap2 muxing code where muxtable-entries will be wrongly selected if the requested muxname is a *prefix* of their m0-entry and they have a matching mN-entry. Fix by additionally checking that the length of the m0_entry is equal. For example muxing of "dss_data2.dss_data2" on omap32xx will fail because the prefix "dss_data2" will match the mux-entries "dss_data2" as well as "dss_data20", with the suffix "dss_data2" matching m0 (for dss_data2) and m4 (for dss_data20). Thus both are recognized as signal path candidates: Relevant muxentries from mux34xx.c: _OMAP3_MUXENTRY(DSS_DATA20, 90, "dss_data20", NULL, "mcspi3_somi", "dss_data2", "gpio_90", NULL, NULL, "safe_mode"), _OMAP3_MUXENTRY(DSS_DATA2, 72, "dss_data2", NULL, NULL, NULL, "gpio_72", NULL, NULL, "safe_mode"), This will result in a failure to mux the pin at all: _omap_mux_get_by_name: Multiple signal paths (2) for dss_data2.dss_data2 Patch should apply to linus' latest master down to rather old linux-2.6 trees. Signed-off-by: David R. Piegdon <lkml@p23q.org> Cc: stable@vger.kernel.org [tony@atomide.com: updated description to include full description] Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09iwlwifi: pcie: try to get ownership several timesEmmanuel Grumbach
commit 501fd9895c1d7d8161ed56698ae2fccb10ef14f5 upstream. Some races with the hardware can happen when we take ownership of the device. Don't give up after the first try. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09mac80211: fix a memory leak on sta rate selection tableFelix Fietkau
commit 53d045258ee2e38b1e882617cb0799a04d05f5fa upstream. If the rate control algorithm uses a selection table, it is leaked when the station is destroyed - fix that. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Christophe Prévotaux <cprevotaux@nltinc.com> Fixes: 0d528d85c519 ("mac80211: improve the rate control API") [add commit log entry, remove pointless NULL check] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09mac80211: don't check netdev state for debugfs read/writeArik Nemtsov
commit 923eaf367206e01f22c97aee22300e332d071916 upstream. Doing so will lead to an oops for a p2p-dev interface, since it has no netdev. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09hwmon: (ina2xx) Cast to s16 on shunt and current regsFabio Baltieri
commit c0214f98943b1fe43f7be61b7782b0c8f0836f28 upstream. All devices supported by ina2xx are bidirectional and report the measured shunt voltage and power values as a signed 16 bit, but the current driver implementation caches all registers as u16, leading to an incorrect sign extension when reporting to userspace in ina2xx_get_value(). This patch fixes the problem by casting the signed registers to s16. Tested on an INA219. Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09rbd: handle parent_overlap on writes correctlyIlya Dryomov
commit 9638556a276125553549fdfe349c464481ec2f39 upstream. The following check in rbd_img_obj_request_submit() rbd_dev->parent_overlap <= obj_request->img_offset allows the fall through to the non-layered write case even if both parent_overlap and obj_request->img_offset belong to the same RADOS object. This leads to data corruption, because the area to the left of parent_overlap ends up unconditionally zero-filled instead of being populated with parent data. Suppose we want to write 1M to offset 6M of image bar, which is a clone of foo@snap; object_size is 4M, parent_overlap is 5M: rbd_data.<id>.0000000000000001 ---------------------|----------------------|------------ | should be copyup'ed | should be zeroed out | write ... ---------------------|----------------------|------------ 4M 5M 6M parent_overlap obj_request->img_offset 4..5M should be copyup'ed from foo, yet it is zero-filled, just like 5..6M is. Given that the only striping mode kernel client currently supports is chunking (i.e. stripe_unit == object_size, stripe_count == 1), round parent_overlap up to the next object boundary for the purposes of the overlap check. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09rbd: use reference counts for image requestsAlex Elder
commit 0f2d5be792b0466b06797f637cfbb0f64dbb408c upstream. Each image request contains a reference count, but to date it has not actually been used. (I think this was just an oversight.) A recent report involving rbd failing an assertion shed light on why and where we need to use these reference counts. Every OSD request associated with an object request uses rbd_osd_req_callback() as its callback function. That function will call a helper function (dependent on the type of OSD request) that will set the object request's "done" flag if the object request if appropriate. If that "done" flag is set, the object request is passed to rbd_obj_request_complete(). In rbd_obj_request_complete(), requests are processed in sequential order. So if an object request completes before one of its predecessors in the image request, the completion is deferred. Otherwise, if it's a completing object's "turn" to be completed, it is passed to rbd_img_obj_end_request(), which records the result of the operation, accumulates transferred bytes, and so on. Next, the successor to this request is checked and if it is marked "done", (deferred) completion processing is performed on that request, and so on. If the last object request in an image request is completed, rbd_img_request_complete() is called, which (typically) destroys the image request. There is a race here, however. The instant an object request is marked "done" it can be provided (by a thread handling completion of one of its predecessor operations) to rbd_img_obj_end_request(), which (for the last request) can then lead to the image request getting torn down. And this can happen *before* that object has itself entered rbd_img_obj_end_request(). As a result, once it *does* enter that function, the image request (and even the object request itself) may have been freed and become invalid. All that's necessary to avoid this is to properly count references to the image requests. We tear down an image request's object requests all at once--only when the entire image request has completed. So there's no need for an image request to count references for its object requests. However, we don't want an image request to go away until the last of its object requests has passed through rbd_img_obj_callback(). In other words, we don't want rbd_img_request_complete() to necessarily result in the image request being destroyed, because it may get called before we've finished processing on all of its object requests. So the fix is to add a reference to an image request for each of its object requests. The reference can be viewed as representing an object request that has not yet finished its call to rbd_img_obj_callback(). That is emphasized by getting the reference right after assigning that as the image object's callback function. The corresponding release of that reference is done at the end of rbd_img_obj_callback(), which every image object request passes through exactly once. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Ilya Dryomov <ilya.dryomov@inktank.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-21 15:44:51 +0000