aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-11-23ASoC: Samsung: Rename AC97 platform deviceJassi Brar
Call the AC97 controller devices found in S3C, S5P and newer SoCs as 'samsung-ac97' rather than 's3c-ac97'. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-23ASoC: Samsung: Rename ASoC DMA driverJassi Brar
Rename Samsung ASoC DMA driver s3c-dma.[c/h] -> dma.[c/h] Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-23ARM: Samsung: Define common audio-dma deviceJassi Brar
The ASoC uses common DMA driver for Audio devices. So it makes sense to a common audio-dma device shared across all platforms. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-23ASoC: Samsung: Rename DMA deviceJassi Brar
Some Samsung SoCs have a PCM(DSP) controller. So the name s3c24xx-pcm-audio for DMA driver is not very appropraite. This patch moves :- s3c24xx-pcm-audio -> samsung-audio Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-23ASoC: Samsung: Remove redundant AQUILA driverJassi Brar
AQUILA and GONI are essentially the same h/w w.r.t ASoC. They only differ by the fact that GONI has stereo speaker-out whereas AQUILA has mono. The difference can easily be handled in the same MACHINE driver by making machine-specific runtime changes. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-22Merge branch 'for-2.6.37' into for-2.6.38Mark Brown
2010-11-22ASoC: Fix a memory leak in alc5623_i2c_probe error pathAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-22ASoC: Restore WM8994 volatile and readable register operationsMark Brown
They went AWOL during the multi-component merge. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-22ASoC: Fix multi-component mismerge in WM8523Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-22ASoC: atmel: test wrong variableVasiliy Kulikov
After clk_get() mclk is checked second time instead of pllb check. In patch v1 Jarkko Nikula noticed that PTR_ERR() is also has wrong argument. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-22ASoC: Remove cyclic dependency between soc.h and soc-dapm.h/soc-dai.hJarkko Nikula
There is no need anymore to include soc.h in soc-dapm.h and soc-dai.h as drivers are converted to include only soc.h. Thanks to Lars-Peter Clausen <lars@metafoo.de> for pointing out the issue. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-22ASoC: Do not include soc-dai.hJarkko Nikula
There is no need to include soc-dai.h since soc.h includes it. Convert drivers to include only soc.h. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-22ASoC: Do not include soc-dapm.hJarkko Nikula
There is no need to include soc-dapm.h since soc.h includes it. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-22ASoC: Fix compile breakage in jz4740.c and smartq_wm8987.cJarkko Nikula
Commit ce6120c require that soc-dapm.h cannot be included before soc.h but these two drivers were not checked. Fix them by including only soc.h as it includes soc-dapm.h. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-22ASoC: stac9766 - set reg_cache_default to stac9766_regAxel Lin
Looks like this is missing during multi-component conversion. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-22ASoC: s3c24xx: test wrong variableVasiliy Kulikov
After clk_get() mclk is checked three times instead of mout_epll and sclk_spdif checks. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-19Merge branch 'next-samsung-asoc' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into for-2.6.38
2010-11-19Merge branch 'for-2.6.37' into for-2.6.38Mark Brown
2010-11-19ASoC: Move WM8994 read/write access data into separate fileMark Brown
Makes the WM8994 driver file itself substantially smaller. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-19ASoC: uda134x - set reg_cache_default to uda134x_regAxel Lin
After checking the code in 2.6.36, I found this is missing during multi-component conversion. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-19ASoC: Provide ADC left/right channel source selection on WM8994Mark Brown
Allow the application to choose if the ADC data presented on the left and right channels is sourced from the internal left or right channel. This allows a mono recording to be presented as stereo on the external bus. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-19ARM: S5PV310: Add audio platform devicesJassi Brar
Define platform devices for all audio devices found on S5PV310 Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-11-19ARM: S5PV210: Upgrade platform device for I2SJassi Brar
Add more information to I2S platform_devices in order to prepare them for new controller driver. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-11-19ARM: S5PC100: Upgrade platform device for I2SJassi Brar
Add more information to I2S platform_devices in order to prepare them for new controller driver. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-11-19ARM: S5P6442: Upgrade platform device for I2SJassi Brar
Add more information to I2S platform_devices in order to prepare them for new controller driver. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-11-19ARM: S5P64X0: Upgrade platform device for I2SJassi Brar
Add more information to I2S platform_devices in order to prepare them for new controller driver. Also, discard duplicated gpio-cfg. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-11-19ARM: S3C64XX: Upgrade platform device for I2SJassi Brar
Add more information to I2S platform_devices in order to prepare them for new controller driver. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-11-19ARM: SAMSUNG: Prepare audio header for new I2S driverJassi Brar
Add new defined and data structures in order to prepare for new I2S driver. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-11-19ARM: SAMSUNG: Rename s3c64xx I2S platform deviceJassi Brar
Since the I2S of S3C64XX and newer SoCs are incremental versions of each other with changes managable in a single driver, rename the 's3c64xx-iis' -> 'samsung-i2s' Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-11-19ARM: S5PV310: Add platform devices for PL330 DMACsJassi Brar
Samsung's Soc S5PV310 has three PL330 DMACs. First is dedicated for Memory->Memory data transfer while the other two meant for data transfer with peripherals. Define and add latter two PL330 DMACs as platform devices on the S5PV310 platform. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-11-18ASoC: Add support for MAX98089 CODECJesse Marroquin
This patch adds initial support for the MAX98089 CODEC. Signed-off-by: Jesse Marroquin <jesse.marroquin@maxim-ic.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-17Merge branch 'for-2.6.37' into for-2.6.38Mark Brown
2010-11-17ASoC: davinci: fixes for multi-componentChris Paulson-Ellis
Multi-component commit f0fba2ad broke a few things which this patch should fix. Tested on the DM355 EVM. I've been as careful as I can, but it would be good if those with access to other Davinci boards could test. -- The multi-component commit put the initialisation of snd_soc_dai.[capture|playback]_dma_data into snd_soc_dai_ops.hw_params of the McBSP, McASP & VCIF drivers (davinci-i2s.c, davinci-mcasp.c & davinci-vcif.c). The initialisation had to be moved from the probe function in these drivers because davinci_*_dai changed from snd_soc_dai to snd_soc_dai_driver. Unfortunately, the DMA params pointer is needed by davinci_pcm_open (in davinci-pcm.c) before hw_params is called. I have moved the initialisation to a new snd_soc_dai_ops.startup function in each of these drivers. This fix indicates that all platforms that use davinci-pcm must have been broken and need to test with this fix. -- The multi-component commit also changed the McBSP driver name from "davinci-asp" to "davinci-i2s" in davinci-i2s.c without updating the board level references to the driver name. This change is understandable, as there is a similarly named "davinci-mcasp" driver in davinci-mcasp.c. There is probably no 'correct' name for this driver. The DM6446 datasheet calls it the "ASP" and describes it as a "specialised McBSP". The DM355 datasheet calls it the "ASP" and describes it as a "specialised ASP". The DM365 datasheet calls it the "McBSP". Rather than fix this problem by reverting to "davinci-asp", I've elected to avoid future confusion with the "davinci-mcasp" driver by changing it to "davinci-mcbsp", which is also consistent with the names of the functions in the driver. There are other fixes required, so it was never going to be as simple as a revert anyway. -- The DM365 only has one McBSP port (of the McBSP platforms, only the DM355 has 2 ports), so I've changed the the id of the platform_device from 0 to -1. -- In davinci-evm.c, the DM6446 EVM can no longer share a snd_soc_dai_link structure with the DM355 EVM as they use different cpu DAI names (the DM355 has 2 ports and the EVM uses the second port, but the DM6446 only has 1 port). This also means that the 2 boards need different snd_soc_card structures. -- The codec_name entries in davinci-evm.c didn't match the i2c ids in the board files. I have only checked and fixed the details of the names used for the McBSP based platforms. Someone with a McASP based platform (eg DA8xx) should check the others. Signed-off-by: Chris Paulson-Ellis <chris@edesix.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-17ASoC: Fix register cache setup WM8994 for multi-componentMark Brown
During the multi-component conversion the WM8994 register cache init got lost. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-16ASoC: Use DAPM context rather than CODEC when constructing sequencesMark Brown
DAPM widgets may be associated with non-CODEC devices so compare based on the DAPM context rather than the CODEC pointer. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-16ASoC: Fix incorrect kfree in wm8962_probe error pathAxel Lin
We allocated memory for wm8962 in wm8962_i2c_probe, and will free the memory in either wm8962_i2c_probe error path or wm8962_i2c_remove. Thus we should not call kfree(wm8962) in wm8962_probe, otherwise we have double free of wm8962. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-16ASoC: Fix incorrect kfree in wm8731_probe error pathAxel Lin
We allocated memory for wm8731 in wm8731_spi_probe / wm8731_i2c_probe, and will free the memory in either wm8731_spi_probe / wm8731_i2c_probe error path or wm8731_spi_remove / wm8731_i2c_remove. Thus we should not call kfree(wm8731) in wm8731_probe, otherwise we have double free of wm8731. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-16ASoC: Fix incorrect kfree in aic3x_probe error pathAxel Lin
We allocated memory for aic3x in aic3x_i2c_probe, and will free the memory in either aic3x_i2c_probe error path or aic3x_i2c_remove. Thus we should not call kfree(aic3x) in aic3x_probe, otherwise we have double free of aic3x. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-16ASoC: Fix incorrect kfree in ad193x_probe error pathAxel Lin
We allocated memory for ad193x in ad193x_spi_probe, and will free the memory in either ad193x_spi_probe error path or ad193x_spi_remove. Thus we should not call kfree(ad193x) in ad193x_probe, otherwise we have double free of ad193x. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-16ASoC: Fix incorrect kfree in ad1836_probe error pathAxel Lin
We allocated memory for ad1836 in ad1836_spi_probe, and will free the memory in either ad1836_spi_probe error path or ad1836_spi_remove. Thus we should not call kfree(ad1836) in ad1836_probe, otherwise we have double free of ad1836. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-15Linux 2.6.37-rc2v2.6.37-rc2Linus Torvalds
2010-11-15capabilities/syslog: open code cap_syslog logic to fix build failureEric Paris
The addition of CONFIG_SECURITY_DMESG_RESTRICT resulted in a build failure when CONFIG_PRINTK=n. This is because the capabilities code which used the new option was built even though the variable in question didn't exist. The patch here fixes this by moving the capabilities checks out of the LSM and into the caller. All (known) LSMs should have been calling the capabilities hook already so it actually makes the code organization better to eliminate the hook altogether. Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-15Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: arm: omap1: devices: need to return with a value OMAP1: camera.h: add missing include omap: dma: Add read-back to DMA interrupt handler to avoid spuriousinterrupts OMAP2: Devkit8000: Fix mmc regulator failure
2010-11-15Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (w83795) Check for BEEP pin availability hwmon: (w83795) Clear intrusion alarm immediately hwmon: (w83795) Read the intrusion state properly hwmon: (w83795) Print the actual temperature channels as sources hwmon: (w83795) List all usable temperature sources hwmon: (w83795) Expose fan control method hwmon: (w83795) Fix fan control mode attributes hwmon: (lm95241) Check validity of input values hwmon: Change mail address of Hans J. Koch
2010-11-15Merge branch 'i2c-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c: Sanity checks on adapter registration i2c: Mark i2c_adapter.id as deprecated i2c: Drivers shouldn't include <linux/i2c-id.h> i2c: Delete unused adapter IDs i2c: Remove obsolete cleanup for clientdata
2010-11-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: sysfs: fix printk warnings PCI: fix pci_bus_alloc_resource() hang, prefer positive decode PCI: read current power state at enable time PCI: fix size checks for mmap() on /proc/bus/pci files x86/PCI: coalesce overlapping host bridge windows PCI hotplug: ibmphp: Add check to prevent reading beyond mapped area
2010-11-15i2c: Sanity checks on adapter registrationJean Delvare
Make sure I2C adapters being registered have the required struct fields set. If they don't, problems will happen later. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-11-15i2c: Mark i2c_adapter.id as deprecatedJean Delvare
It's about time to make it clear that i2c_adapter.id is deprecated. Hopefully this will remind the last user to move over to a different strategy. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Jarod Wilson <jarod@redhat.com> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
2010-11-15i2c: Drivers shouldn't include <linux/i2c-id.h>Jean Delvare
Drivers don't need to include <linux/i2c-id.h>, especially not when they don't use anything that header file provides. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Michael Hunold <michael@mihu.de> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-11-15i2c: Delete unused adapter IDsJean Delvare
Delete unused I2C adapter IDs. Special cases are: * I2C_HW_B_RIVA was still set in driver rivafb, however no other driver is ever looking for this value, so we can safely remove it. * I2C_HW_B_HDPVR is used in staging driver lirc_zilog, however no adapter ID is ever set to this value, so the code in question never runs. As the code additionally expects that I2C_HW_B_HDPVR may not be defined, we can delete it now and let the lirc_zilog driver maintainer rewrite this piece of code. Big thanks for Hans Verkuil for doing all the hard work :) Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Jarod Wilson <jarod@redhat.com> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2025-08-15 03:26:43 +0000