aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-07-11ARM: shmobile: kzm9g: defconfig enable INOTIFY_USERSimon Horman
This is required for udev to run which is common to many user-spaces. It is my understanding that this is a requirement for automated testing conducted by Iwamatsu-san. Signed-off-by: Simon Horman <horms@verge.net.au> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-02ARM: mach-shmobile: add SDHI2 to the 2.8V fixed regulator consumers on kzm9gGuennadi Liakhovetski
The recently added SDHI2 interface to kzm9g needs power supplies for the upcoming transition away from OCR masks, provided in platform data. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-30ARM: mach-shmobile: add fixed voltage regulators to kzm9gGuennadi Liakhovetski
On kzm9g provide 1.8V and 2.8V supplies for its SD/MMC-card interfaces and a dummy regulator for the smsc911x driver. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-30Merge branch 'renesas-board-common' into renesas-kzm9gRafael J. Wysocki
* renesas-board-common: regulator: extend the fixed dummy voltage regulator to accept voltage regulator: support multiple dummy fixed regulators
2012-06-30Merge tag 'topic/fixed' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into renesas-board-common Several following board changes depend on this branch.
2012-06-30ARM: shmobile: kzm9g: enable DMAEngine on MMCIFKuninori Morimoto
It is possible to reduce CPU load if MMCIF used DMAEngine. This patch enabled it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-30ARM: shmobile: kzm9g: enable DMAEngine on FSIKuninori Morimoto
It is possible to reduce CPU load if FSI playback used DMAEngine. This patch enabled it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-30ARM: shmobile: kzm9g: enable MicroSDKuninori Morimoto
This patch enable MicroSD on CN20 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-30ARM: shmobile: kzm9g: enable USB functionKuninori Morimoto
This patch enable USB function on CN17 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-30Merge branch 'renesas-sh73a0' into renesas-kzm9gRafael J. Wysocki
* renesas-sh73a0: ARM: shmobile: use common DMAEngine definitions on sh73a0 ARM: shmobile: sh73a0: add DMAEngine support for MPDMAC ARM: shmobile: sh73a0: add USB clock support ARM: shmobile: add common DMAEngine definitions ARM: shmobile: add common extra gpio functions
2012-06-30ARM: shmobile: use common DMAEngine definitions on sh73a0Kuninori Morimoto
This patch switch over to use common DMAEngine definitions, and reduced a waste of code. It is easy to understand if sh_dmae_pdata / sh_dmae_slave_config settings are used defined value instead of direct value. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-30ARM: shmobile: sh73a0: add DMAEngine support for MPDMACKuninori Morimoto
Current shdmac can support MPDMAC (= sound DMA) on sh73a0. This support reduce CPU load when sound was playback. On v2.0 manual, MPDMAC MID/RID number were wrong. This patch is using the number which seems correct. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-30ARM: shmobile: sh73a0: add USB clock supportKuninori Morimoto
It is required from renesas_usbhs driver. This patch is based on v2.0 manual. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-30Merge branch 'renesas-soc-core' into renesas-sh73a0Rafael J. Wysocki
* renesas-soc-core: ARM: shmobile: add common DMAEngine definitions ARM: shmobile: add common extra gpio functions
2012-06-30ARM: shmobile: add common DMAEngine definitionsKuninori Morimoto
Current shmobile have DMAEngine specific settings on each CPU code, but SH-ARM DMAC use same value. This patch adds new dma-register.h header to share definitions and reduce a waste of code on SH-ARM architecture. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-30ARM: shmobile: add common extra gpio functionsKuninori Morimoto
Current gpio frame work doesn't have the method to control just pull up/down/free, but some SH-ARM boards need such kind of operation. This patch adds common extra gpio functions for SH-ARM. But these functions should be replaced by correct gpio function in the future. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-21ARM: shmobile: kzm9g: Support Real Time ClockTetsuyuki Kobayashi
KZM-A9-GT board has RTC device r2025d at I2C channel 0 with slave address 0x64. This patch enables reading and writing hardware real time clock on KZM-A9-GT board. Interrupt is not yet supported. How to test this patch using user space command. Read RTC # hwclock -r Copy system clock to RTC # hwclock -w Shutdown and power off the board, and wait a while, then power on again. Check RTC still keeps correct date. Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-20ARM: shmobile: kzm9g: enable FSI-AK4648Kuninori Morimoto
This patch enable sound playback/capture on CN9/CN10. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-20ARM: shmobile: sh73a0: add FSI clockKuninori Morimoto
This patch is required from FSI sound driver Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-20ARM: mach-shmobile: add missing GPIO IRQ configuration on mackerelGuennadi Liakhovetski
SDHI0 card-detect GPIO IRQ on mackarel currently works, because it is the default configuration of IRQ26. However, we should not rely on this and should configure the function explicitly. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-20ARM: mach-shmobile: Fix build when SMP is enabled and EMEV2 is not enabledNobuhiro Iwamatsu
Build failed, when SMP is enabled and EMEV2 is not enabled. arch/arm/mach-shmobile/built-in.o: In function `shmobile_platform_cpu_kill': /home/iwamatsu/work/kernel/sh-2.6-devel/arch/arm/mach-shmobile/platsmp.c:62: undefined reference to `emev2_platform_cpu_kill' arch/arm/mach-shmobile/built-in.o: In function `shmobile_smp_get_core_count': /home/iwamatsu/work/kernel/sh-2.6-devel/arch/arm/mach-shmobile/platsmp.c:39: undefined reference to `emev2_get_core_count' arch/arm/mach-shmobile/built-in.o: In function `shmobile_smp_prepare_cpus': /home/iwamatsu/work/kernel/sh-2.6-devel/arch/arm/mach-shmobile/platsmp.c:53: undefined reference to `emev2_smp_prepare_cpus' arch/arm/mach-shmobile/built-in.o: In function `platform_secondary_init': /home/iwamatsu/work/kernel/sh-2.6-devel/arch/arm/mach-shmobile/platsmp.c:78: undefined reference to `emev2_secondary_init' arch/arm/mach-shmobile/built-in.o: In function `boot_secondary': /home/iwamatsu/work/kernel/sh-2.6-devel/arch/arm/mach-shmobile/platsmp.c:90: undefined reference to `emev2_boot_secondary This is the cause by when EMEV2 is disabled, that the check by OF of EMEV2 is performed in platsmp.c. This patch revise what the function about EMEV2 may not be used in this file, when EMEV2 is not enabled. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Acked-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-20ARM: shmobile: sh7372: bugfix: chclr_offset baseKuninori Morimoto
chclr_write() will use (chan_reg + chclr_offset). In sh7372 case, DMA1CHCLR is started from 0xfe008220, and chan_reg is started from 0xfe008020 (= sh7372_dmae0_resources). Thus, chclr_offset should be (0x220 - 0x20) instead of 0x220. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-20ARM: shmobile: sh73a0: bugfix: SY-DMAC numberKuninori Morimoto
681e1b3eeb3606e06a7c4984e8058df84296f8bb (ARM: mach-shmobile: sh73a0 DMA Engine support for SY-DMAC) adds SY-DMAC, but it is 218, not 318 This patch is based on v2.0 manual Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-19regulator: extend the fixed dummy voltage regulator to accept voltageGuennadi Liakhovetski
Trivially extend the regulator_register_always_on() helper function to be even more useful by adding a voltage parameter to it. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-19regulator: support multiple dummy fixed regulatorsGuennadi Liakhovetski
Currently regulator_register_fixed() uses a constant name to register a fixed dummy regulator. This is sufficient in principle, since there is no reason to register multiple such regulators. The user can simply supply all consumers in one array and use it to initialise such a regulator. However, in some cases it can be convenient to register multiple such regulators. This is also a prerequisite for the upcoming patch, that will add a voltage parameter to this function. The original function is provided as a wrapper macro. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-16Linux 3.5-rc3v3.5-rc3Linus Torvalds
2012-06-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs compile warning fixes from Chris Mason. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: cast devid to unsigned long long for printk %llu Btrfs: init old_generation in get_old_root
2012-06-16Merge branch 'stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile Pull arch/tile update from Chris Metcalf: "This one-line bug fix unbreaks glibc robust mutexes (among other things no doubt), from code merged in during the 3.5 merge window but which we had been running internally at Tilera for almost a year." * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: fix bug in get_user() for 4-byte values
2012-06-16Merge tag 'fbdev-fixes-for-3.5-1' of git://github.com/schandinat/linux-2.6Linus Torvalds
Pull fbdev fixes from Florian Tobias Schandinat: - two fixes for s3c-fb by Jingoo Han (including a fix for a potential division by zero) - a couple of randconfig fixes by Arnd Bergmann - a cleanup for bfin_adv7393fb by Emil Goode * tag 'fbdev-fixes-for-3.5-1' of git://github.com/schandinat/linux-2.6: video: s3c-fb: fix possible division by zero in s3c_fb_calc_pixclk video: s3c-fb: clear SHADOWCON register when clearing hardware window registers drivers/tosa: driver needs I2C and SPI to compile drivers/savagefb: use mdelay instead of udelay video/console: automatically select a font video/ili9320: do not mark exported functions __devexit drivers/video: use correct __devexit_p annotation video: bfin_adv7393fb: Convert to kstrtouint_from_user
2012-06-16tile: fix bug in get_user() for 4-byte valuesChris Metcalf
The definition of 32-bit values in the 64-bit tilegx architecture is that they should be sign-extended regardless of whether they are considered signed or unsigned by the compiler. Accordingly, we need to use an "ld4s" rather than "ld4u" to load and sign-extend for get_user(). This fixes glibc bug 14238 (see http://sourceware.org/bugzilla), introduced during the 3.5 merge window. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-06-15swap: fix shmem swapping when more than 8 areasHugh Dickins
Minchan Kim reports that when a system has many swap areas, and tmpfs swaps out to the ninth or more, shmem_getpage_gfp()'s attempts to read back the page cannot locate it, and the read fails with -ENOMEM. Whoops. Yes, I blindly followed read_swap_header()'s pte_to_swp_entry( swp_entry_to_pte()) technique for determining maximum usable swap offset, without stopping to realize that that actually depends upon the pte swap encoding shifting swap offset to the higher bits and truncating it there. Whereas our radix_tree swap encoding leaves offset in the lower bits: it's swap "type" (that is, index of swap area) that was truncated. Fix it by reducing the SWP_TYPE_SHIFT() in swapops.h, and removing the broken radix_to_swp_entry(swp_to_radix_entry()) from read_swap_header(). This does not reduce the usable size of a swap area any further, it leaves it as claimed when making the original commit: no change from 3.0 on x86_64, nor on i386 without PAE; but 3.0's 512GB is reduced to 128GB per swapfile on i386 with PAE. It's not a change I would have risked five years ago, but with x86_64 supported for ten years, I believe it's appropriate now. Hmm, and what if some architecture implements its swap pte with offset encoded below type? That would equally break the maximum usable swap offset check. Happily, they all follow the same tradition of encoding offset above type, but I'll prepare a check on that for next. Reported-and-Reviewed-and-Tested-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: stable@vger.kernel.org [3.1, 3.2, 3.3, 3.4] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-15Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a couple of minor fixes, one for a preempt warning in the mpt2sas driver and one is a config failure with the new sd async domain." * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] Fix sd_probe_domain config problem [SCSI] mpt2sas: Fix unsafe using smp_processor_id() in preemptible
2012-06-15Merge tag 'nfs-for-3.5-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: - Fix a couple of mount regressions due to the recent cleanups. - Fix an Oops in the open recovery code - Fix an rpc_pipefs upcall hang that results from some of the net namespace work from 3.4.x (stable kernel candidate). - Fix a couple of write and o_direct regressions that were found at last weeks Bakeathon testing event in Ann Arbor." * tag 'nfs-for-3.5-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: add an endian notation for sparse NFSv4.1: integer overflow in decode_cb_sequence_args() rpc_pipefs: allow rpc_purge_list to take a NULL waitq pointer NFSv4 do not send an empty SETATTR compound NFSv2: EOF incorrectly set on short read NFS: Use the NFS_DEFAULT_VERSION for v2 and v3 mounts NFS: fix directio refcount bug on commit NFSv4: Fix unnecessary delegation returns in nfs4_do_open NFSv4.1: Convert another trivial printk into a dprintk NFS4: Fix open bug when pnfs module blacklisted NFS: Remove incorrect BUG_ON in nfs_found_client NFS: Map minor mismatch error to protocol not support error. NFS: Fix a commit bug NFS4: Set parsed mount data version to 4 NFSv4.1: Ensure we clear session state flags after a session creation NFSv4.1: Convert a trivial printk into a dprintk NFSv4: Fix up decode_attr_mdsthreshold NFSv4: Fix an Oops in the open recovery code NFSv4.1: Fix a request leak on the back channel
2012-06-15Merge branch 'fixes-for-linus' of ↵Linus Torvalds
git://git.linaro.org/people/mszyprowski/linux-dma-mapping Pull DMA-mapping fixes from Marek Szyprowski: "A set of minor fixes for dma-mapping code (ARM and x86) required for Contiguous Memory Allocator (CMA) patches merged in v3.5-rc1." * 'fixes-for-linus' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: x86: dma-mapping: fix broken allocation when dma_mask has been provided ARM: dma-mapping: fix debug messages in dmabounce code ARM: mm: fix type of the arm_dma_limit global variable ARM: dma-mapping: Add missing static storage class specifier
2012-06-15Merge tag 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc Pull PowerPC fix from Paul Mackerras: "Just one commit, and a one-liner at that, but an important one; without it hard_irq_disable() does nothing on powerpc." * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: Make hard_irq_disable() actually hard-disable interrupts
2012-06-15Merge branch 'for-3.5' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
Pull two nfsd bugfixes from J. Bruce Fields. * 'for-3.5' of git://linux-nfs.org/~bfields/linux: nfsd4: BUG_ON(!is_spin_locked()) no good on UP kernels NFS: hard-code init_net for NFS callback transports
2012-06-15Merge tag 'stable/for-linus-3.5-rc2-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull five Xen bug-fixes from Konrad Rzeszutek Wilk: - When booting as PVHVM we would try to use PV console - but would not validate the parameters causing us to crash during restore b/c we re-use the wrong event channel. - When booting on machines with SR-IOV PCI bridge we didn't check for the bridge and tried to use it. - Under AMD machines would advertise the APERFMPERF resulting in needless amount of MSRs from the guest. - A global value (xen_released_pages) was not subtracted at bootup when pages were added back in. This resulted in the balloon worker having the wrong account of how many pages were truly released. - Fix dead-lock when xen-blkfront is run in the same domain as xen-blkback. * tag 'stable/for-linus-3.5-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: mark local pages as FOREIGN in the m2p_override xen/setup: filter APERFMPERF cpuid feature out xen/balloon: Subtract from xen_released_pages the count that is populated. xen/pci: Check for PCI bridge before using it. xen/events: Add WARN_ON when quick lookup found invalid type. xen/hvc: Check HVM_PARAM_CONSOLE_[EVTCHN|PFN] for correctness. xen/hvc: Fix error cases around HVM_PARAM_CONSOLE_PFN xen/hvc: Collapse error logic.
2012-06-15Merge tag 'usb-3.5-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg Kroah-Hartman: "Here are a bunch of tiny fixes for the USB core and drivers for 3.5-rc3 A bunch of gadget fixes, and new device ids, as well as some fixes for a number of different regressions that have been reported recently. We also fixed some PCI host controllers to resolve a long-standing bug with a whole class of host controllers that have been plaguing people for a number of kernel releases, preventing their systems from suspending properly. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'usb-3.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (41 commits) USB: fix gathering of interface associations usb: ehci-sh: fix illegal phy_init() running when platform_data is NULL usb: cdc-acm: fix devices not unthrottled on open Fix OMAP EHCI suspend/resume failure (i693) USB: ohci-hub: Mark ohci_finish_controller_resume() as __maybe_unused usb: use usb_serial_put in usb_serial_probe errors USB: EHCI: Fix build warning in xilinx ehci driver USB: fix PS3 EHCI systems xHCI: Increase the timeout for controller save/restore state operation xhci: Don't free endpoints in xhci_mem_cleanup() xhci: Fix invalid loop check in xhci_free_tt_info() xhci: Fix error path return value. USB: Checking the wrong variable in usb_disable_lpm() usb-storage: Add 090c:1000 to unusal-devs USB: serial-generic: use a single set of device IDs USB: serial: Enforce USB driver and USB serial driver match USB: add NO_D3_DURING_SLEEP flag and revert 151b61284776be2 USB: option: add more YUGA device ids USB: mos7840: Fix compilation of usb serial driver USB: option: fix memory leak ...
2012-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ideLinus Torvalds
Pull IDE fixes from David S. Miller: 1) Two fixes to icside, one for a build failure and another for a warning. From Christian Dietrich. 2) Fix a bit operation that did erroneous masking, from Julia Lawall. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide: drivers/ide/ide-cs.c: adjust suspicious bit operation ide: icside.c: fix printk format string compile warning ide: icside.c: Fix compile with CONFIG_BLK_DEV_IDEDMA_ICS=n
2012-06-15Btrfs: cast devid to unsigned long long for printk %lluChris Mason
Avoid warning in 32 bit machines Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
Pull sparc update from David S. Miller: "This just removes some sparc headers that were never, ever, used." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: remove two unused headers
2012-06-15Btrfs: init old_generation in get_old_rootChris Mason
gcc was giving an uninit variable warning here. Strictly speaking we don't need to init it, but this will make things much less error prone. Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-06-15Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar. * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/smp: Fix topology checks on AMD MCM CPUs x86/mm: Fix some kernel-doc warnings x86, um: Correct syscall table type attributes breaking gcc 4.8
2012-06-15Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar. * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: watchdog: Quiet down the boot messages perf/x86: Fix broken LBR fixup code tracing: Have tracing_off() actually turn tracing off
2012-06-15Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core updates (RCU and locking) from Ingo Molnar: "Most of the diffstat comes from the RCU slow boot regression fixes, but there's also a debuggability improvements/fixes." * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: memblock: Document memblock_is_region_{memory,reserved}() rcu: Precompute RCU_FAST_NO_HZ timer offsets rcu: Move RCU_FAST_NO_HZ per-CPU variables to rcu_dynticks structure rcu: Update RCU_FAST_NO_HZ tracing for lazy callbacks rcu: RCU_FAST_NO_HZ detection of callback adoption spinlock: Indicate that a lockup is only suspected kdump: Execute kmsg_dump(KMSG_DUMP_PANIC) after smp_send_stop() panic: Make panic_on_oops configurable
2012-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds
Pull target updates from Nicholas Bellinger: "This series contains post merge qla_target.c / tcm_qla2xxx bugfixes from the past weeks, including the patch to allow target-core to use an optional session shutdown callback to help address an active I/O shutdown bug in tcm_qla2xxx code (Joern). Also included is a target regression bugfix releated to explict ALUA target port group CDB emulation that is CC'ed to stable (Roland)." * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: qla2xxx: Remove version.h header file inclusion tcm_qla2xxx: Handle malformed wwn strings properly tcm_qla2xxx: tcm_qla2xxx_handle_tmr() can be static qla2xxx: Don't leak commands we give up on in qlt_do_work() qla2xxx: Don't crash if we can't find cmd for failed CTIO tcm_qla2xxx: Don't insert nacls without sessions into the btree target: Return error to initiator if SET TARGET PORT GROUPS emulation fails tcm_qla2xxx: Clear session s_id + loop_id earlier during shutdown tcm_qla2xxx: Convert to TFO->put_session() usage target: Add TFO->put_session() caller for HW fabric session shutdown
2012-06-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs update from Chris Mason: "The dates look like I had to rebase this morning because there was a compiler warning for a printk arg that I had missed earlier. These are all fixes, including one to prevent using stale pointers for device names, and lots of fixes around transaction abort cleanups (Josef, Liu Bo). Jan Schmidt also sent in a number of fixes for the new reference number tracking code. Liu Bo beat me to updating the MAINTAINERS file. Since he thought to also fix the git url, I kept his commit." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (24 commits) Btrfs: update MAINTAINERS info for BTRFS FILE SYSTEM Btrfs: destroy the items of the delayed inodes in error handling routine Btrfs: make sure that we've made everything in pinned tree clean Btrfs: avoid memory leak of extent state in error handling routine Btrfs: do not resize a seeding device Btrfs: fix missing inherited flag in rename Btrfs: fix incompat flags setting Btrfs: fix defrag regression Btrfs: call filemap_fdatawrite twice for compression Btrfs: keep inode pinned when compressing writes Btrfs: implement ->show_devname Btrfs: use rcu to protect device->name Btrfs: unlock everything properly in the error case for nocow Btrfs: fix btrfs_destroy_marked_extents Btrfs: abort the transaction if the commit fails Btrfs: wake up transaction waiters when aborting a transaction Btrfs: fix locking in btrfs_destroy_delayed_refs Btrfs: pass locked_page into extent_clear_unlock_delalloc if theres an error Btrfs: fix race in tree mod log addition Btrfs: add btrfs_next_old_leaf ...
2012-06-15Btrfs: update MAINTAINERS info for BTRFS FILE SYSTEMLiu Bo
Update to the latest btrfs's maintainer mail and git repo. Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-06-15Btrfs: destroy the items of the delayed inodes in error handling routineMiao Xie
the items of the delayed inodes were forgotten to be freed, this patch fixes it. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-06-15Btrfs: make sure that we've made everything in pinned tree cleanLiu Bo
Since we have two trees for recording pinned extents, we need to go through both of them to make sure that we've done everything clean. Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>