aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-12-17Linux 3.6.11v3.6.11Greg Kroah-Hartman
2012-12-17sctp: fix -ENOMEM result with invalid user space pointer in sendto() syscallTommi Rantala
[ Upstream commit 6e51fe7572590d8d86e93b547fab6693d305fd0d ] Consider the following program, that sets the second argument to the sendto() syscall incorrectly: #include <string.h> #include <arpa/inet.h> #include <sys/socket.h> int main(void) { int fd; struct sockaddr_in sa; fd = socket(AF_INET, SOCK_STREAM, 132 /*IPPROTO_SCTP*/); if (fd < 0) return 1; memset(&sa, 0, sizeof(sa)); sa.sin_family = AF_INET; sa.sin_addr.s_addr = inet_addr("127.0.0.1"); sa.sin_port = htons(11111); sendto(fd, NULL, 1, 0, (struct sockaddr *)&sa, sizeof(sa)); return 0; } We get -ENOMEM: $ strace -e sendto ./demo sendto(3, NULL, 1, 0, {sa_family=AF_INET, sin_port=htons(11111), sin_addr=inet_addr("127.0.0.1")}, 16) = -1 ENOMEM (Cannot allocate memory) Propagate the error code from sctp_user_addto_chunk(), so that we will tell user space what actually went wrong: $ strace -e sendto ./demo sendto(3, NULL, 1, 0, {sa_family=AF_INET, sin_port=htons(11111), sin_addr=inet_addr("127.0.0.1")}, 16) = -1 EFAULT (Bad address) Noticed while running Trinity (the syscall fuzzer). Signed-off-by: Tommi Rantala <tt.rantala@gmail.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17sctp: fix memory leak in sctp_datamsg_from_user() when copy from user space ↵Tommi Rantala
fails [ Upstream commit be364c8c0f17a3dd42707b5a090b318028538eb9 ] Trinity (the syscall fuzzer) discovered a memory leak in SCTP, reproducible e.g. with the sendto() syscall by passing invalid user space pointer in the second argument: #include <string.h> #include <arpa/inet.h> #include <sys/socket.h> int main(void) { int fd; struct sockaddr_in sa; fd = socket(AF_INET, SOCK_STREAM, 132 /*IPPROTO_SCTP*/); if (fd < 0) return 1; memset(&sa, 0, sizeof(sa)); sa.sin_family = AF_INET; sa.sin_addr.s_addr = inet_addr("127.0.0.1"); sa.sin_port = htons(11111); sendto(fd, NULL, 1, 0, (struct sockaddr *)&sa, sizeof(sa)); return 0; } As far as I can tell, the leak has been around since ~2003. Signed-off-by: Tommi Rantala <tt.rantala@gmail.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17bonding: fix race condition in bonding_store_slaves_activenikolay@redhat.com
[ Upstream commit e196c0e579902f42cf72414461fb034e5a1ffbf7 ] Race between bonding_store_slaves_active() and slave manipulation functions. The bond_for_each_slave use in bonding_store_slaves_active() is not protected by any synchronization mechanism. NULL pointer dereference is easy to reach. Fixed by acquiring the bond->lock for the slave walk. v2: Make description text < 75 columns Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17bonding: Bonding driver does not consider the gso_max_size/gso_max_segs ↵Sarveshwar Bandi
setting of slave devices. [ Upstream commit 0e376bd0b791ac6ac6bdb051492df0769c840848 ] Patch sets the lowest gso_max_size and gso_max_segs values of the slave devices during enslave and detach. Signed-off-by: Sarveshwar Bandi <sarveshwar.bandi@emulex.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17net: cdc_ncm: add Huawei devicesBjørn Mork
[ Upstream commit bbc8d9228ea8e37ce29fa96150d10b85a2c7be60 ] A number of Huawei 3G and LTE modems implement a CDC NCM function, including the necessary functional descriptors, but using a non standard interface layout and class/subclass/protocol codes. These devices can be handled by this driver with only a minor change to the probing logic, allowing a single combined control and data interface. This works because the devices - include a CDC Union descriptor labelling the combined interface as both master and slave, and - have an alternate setting #1 for the bulk endpoints on the combined interface. The 3G/LTE network connection is managed by vendor specific AT commands on a serial function in the same composite device. Handling the managment function is out of the scope of this driver. It will be handled by an appropriate USB serial driver. Reported-and-Tested-by: Olof Ermis <olof.ermis@gmail.com> Reported-and-Tested-by: Tommy Cheng <tommy7765@yahoo.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17usb/ipheth: Add iPhone 5 supportJay Purohit
[ Upstream commit af1b85e49089f945deb46258b0fc4bc9910afb22 ] I noticed that the iPhone ethernet driver did not support iPhone 5. I quickly added support to it in my kernel, here's a patch. Signed-off-by: Jay Purohit <jspurohit@velocitylimitless.com> Acked-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Jan Ceuleers <jan.ceuleers@computer.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17inet_diag: validate port comparison byte code to prevent unsafe readsNeal Cardwell
[ Upstream commit 5e1f54201cb481f40a04bc47e1bc8c093a189e23 ] Add logic to verify that a port comparison byte code operation actually has the second inet_diag_bc_op from which we read the port for such operations. Previously the code blindly referenced op[1] without first checking whether a second inet_diag_bc_op struct could fit there. So a malicious user could make the kernel read 4 bytes beyond the end of the bytecode array by claiming to have a whole port comparison byte code (2 inet_diag_bc_op structs) when in fact the bytecode was not long enough to hold both. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17inet_diag: avoid unsafe and nonsensical prefix matches in inet_diag_bc_run()Neal Cardwell
[ Upstream commit f67caec9068cee426ec23cf9005a1dee2ecad187 ] Add logic to check the address family of the user-supplied conditional and the address family of the connection entry. We now do not do prefix matching of addresses from different address families (AF_INET vs AF_INET6), except for the previously existing support for having an IPv4 prefix match an IPv4-mapped IPv6 address (which this commit maintains as-is). This change is needed for two reasons: (1) The addresses are different lengths, so comparing a 128-bit IPv6 prefix match condition to a 32-bit IPv4 connection address can cause us to unwittingly walk off the end of the IPv4 address and read garbage or oops. (2) The IPv4 and IPv6 address spaces are semantically distinct, so a simple bit-wise comparison of the prefixes is not meaningful, and would lead to bogus results (except for the IPv4-mapped IPv6 case, which this commit maintains). Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17inet_diag: validate byte code to prevent oops in inet_diag_bc_run()Neal Cardwell
[ Upstream commit 405c005949e47b6e91359159c24753519ded0c67 ] Add logic to validate INET_DIAG_BC_S_COND and INET_DIAG_BC_D_COND operations. Previously we did not validate the inet_diag_hostcond, address family, address length, and prefix length. So a malicious user could make the kernel read beyond the end of the bytecode array by claiming to have a whole inet_diag_hostcond when the bytecode was not long enough to contain a whole inet_diag_hostcond of the given address family. Or they could make the kernel read up to about 27 bytes beyond the end of a connection address by passing a prefix length that exceeded the length of addresses of the given family. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17inet_diag: fix oops for IPv4 AF_INET6 TCP SYN-RECV stateNeal Cardwell
[ Upstream commit 1c95df85ca49640576de2f0a850925957b547b84 ] Fix inet_diag to be aware of the fact that AF_INET6 TCP connections instantiated for IPv4 traffic and in the SYN-RECV state were actually created with inet_reqsk_alloc(), instead of inet6_reqsk_alloc(). This means that for such connections inet6_rsk(req) returns a pointer to a random spot in memory up to roughly 64KB beyond the end of the request_sock. With this bug, for a server using AF_INET6 TCP sockets and serving IPv4 traffic, an inet_diag user like `ss state SYN-RECV` would lead to inet_diag_fill_req() causing an oops or the export to user space of 16 bytes of kernel memory as a garbage IPv6 address, depending on where the garbage inet6_rsk(req) pointed. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17ipv4: ip_check_defrag must not modify skb before unsharingJohannes Berg
[ Upstream commit 1bf3751ec90cc3174e01f0d701e8449ce163d113 ] ip_check_defrag() might be called from af_packet within the RX path where shared SKBs are used, so it must not modify the input SKB before it has unshared it for defragmentation. Use skb_copy_bits() to get the IP header and only pull in everything later. The same is true for the other caller in macvlan as it is called from dev->rx_handler which can also get a shared SKB. Reported-by: Eric Leblond <eric@regit.org> Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17ipv4: avoid passing NULL to inet_putpeer() in icmpv4_xrlim_allow()Neal Cardwell
[ Upstream commit e1a676424c290b1c8d757e3860170ac7ecd89af4 ] inet_getpeer_v4() can return NULL under OOM conditions, and while inet_peer_xrlim_allow() is OK with a NULL peer, inet_putpeer() will crash. This code path now uses the same idiom as the others from: 1d861aa4b3fb08822055345f480850205ffe6170 ("inet: Minimize use of cached route inetpeer."). Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17ipv4: do not cache looped multicastsJulian Anastasov
[ Upstream commit 636174219b52b5a8bc51bc23bbcba97cd30a65e3 ] Starting from 3.6 we cache output routes for multicasts only when using route to 224/4. For local receivers we can set RTCF_LOCAL flag depending on the membership but in such case we use maddr and saddr which are not caching keys as before. Additionally, we can not use same place to cache routes that differ in RTCF_LOCAL flag value. Fix it by caching only RTCF_MULTICAST entries without RTCF_LOCAL (send-only, no loopback). As a side effect, we avoid unneeded lookup for fnhe when not caching because multicasts are not redirected and they do not learn PMTU. Thanks to Maxime Bizon for showing the caching problems in __mkroute_output for 3.6 kernels: different RTCF_LOCAL flag in cache can lead to wrong ip_mc_output or ip_output call and the visible problem is that traffic can not reach local receivers via loopback. Reported-by: Maxime Bizon <mbizon@freebox.fr> Tested-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17irda: sir_dev: Fix copy/paste typoAlexander Shiyan
[ Upstream commit 2355a62bcbdcc4b567425bab036bfab6ade87eed ] Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17ipv6: fix inet6_csk_update_pmtu() return valueEric Dumazet
[ Upstream commit b4dd006760d671337b62532277b0296bcee8dfd4 ] In case of error, inet6_csk_update_pmtu() should consistently return NULL. Bug added in commit 35ad9b9cf7d8a (ipv6: Add helper inet6_csk_update_pmtu().) Reported-by: Lluís Batlle i Rossell <viric@viric.name> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17ne2000: add the right platform deviceAlan Cox
[ Upstream commit da9da01d9199b5bb15289d0859053c9aa3a34ac0 ] Without this udev doesn't have a way to key the ne device to the platform device. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17sis900: fix sis900_set_mode call parameters.Francois Romieu
[ Upstream commit 8495c0da20bc496ac9d5da2b292adb28f61d2713 ] Leftover of 57d6d456cfb89264f87d24f52640ede23fdf12bd ("sis900: stop using net_device.{base_addr, irq} and convert to __iomem."). It is needed for suspend / resume to work. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Tested-by: Jan Janssen <medhefgo@web.de> Cc: Daniele Venzano <venza@brownhat.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17PCI/PM: Fix deadlock when unbinding device if parent in D3coldHuang Ying
commit 90b5c1d7c45eeb622302680ff96ed30c1a2b6f0e upstream. If a PCI device and its parents are put into D3cold, unbinding the device will trigger deadlock as follow: - driver_unbind - device_release_driver - device_lock(dev) <--- previous lock here - __device_release_driver - pm_runtime_get_sync ... - rpm_resume(dev) - rpm_resume(dev->parent) ... - pci_pm_runtime_resume ... - pci_set_power_state - __pci_start_power_transition - pci_wakeup_bus(dev->parent->subordinate) - pci_walk_bus - device_lock(dev) <--- deadlock here If we do not do device_lock in pci_walk_bus, we can avoid deadlock. Device_lock in pci_walk_bus is introduced in commit: d71374dafbba7ec3f67371d3b7e9f6310a588808, corresponding email thread is: https://lkml.org/lkml/2006/5/26/38. The patch author Zhang Yanmin said device_lock is added to pci_walk_bus because: Some error handling functions call pci_walk_bus. For example, PCIe aer. Here we lock the device, so the driver wouldn't detach from the device, as the cb might call driver's callback function. So I fixed the deadlock as follows: - remove device_lock from pci_walk_bus - add device_lock into callback if callback will call driver's callback I checked pci_walk_bus users one by one, and found only PCIe aer needs device lock. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> CC: stable@vger.kernel.org # v3.6+ CC: Zhang Yanmin <yanmin.zhang@intel.com>
2012-12-17rcu: Fix batch-limit size problemEric Dumazet
commit 878d7439d0f45a95869e417576774673d1fa243f upstream. Commit 29c00b4a1d9e27 (rcu: Add event-tracing for RCU callback invocation) added a regression in rcu_do_batch() Under stress, RCU is supposed to allow to process all items in queue, instead of a batch of 10 items (blimit), but an integer overflow makes the effective limit being 1. So, unless there is frequent idle periods (during which RCU ignores batch limits), RCU can be forced into a state where it cannot keep up with the callback-generation rate, eventually resulting in OOM. This commit therefore converts a few variables in rcu_do_batch() from int to long to fix this problem, along with the module parameters controlling the batch limits. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17USB: EHCI: bugfix: urb->hcpriv should not be NULLAlan Stern
commit 2656a9abcf1ec8dd5fee6a75d6997a0f2fa0094e upstream. This patch (as1632b) fixes a bug in ehci-hcd. The USB core uses urb->hcpriv to determine whether or not an URB is active; host controller drivers are supposed to set this pointer to a non-NULL value when an URB is queued. However ehci-hcd sets it to NULL for isochronous URBs, which defeats the check in usbcore. In itself this isn't a big deal. But people have recently found that certain sequences of actions will cause the snd-usb-audio driver to reuse URBs without waiting for them to complete. In the absence of proper checking by usbcore, the URBs get added to their endpoint list twice. This leads to list corruption and a system freeze. The patch makes ehci-hcd assign a meaningful value to urb->hcpriv for isochronous URBs. Improving robustness always helps. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Artem S. Tashkinov <t.artem@lycos.com> Reported-by: Christof Meerwald <cmeerw@cmeerw.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17perf test: fix a build error on builtin-testZheng Liu
commit 12f8f74b2a4d26c4facfa7ef99487cf0930f6ef7 upstream. Recently I build perf and get a build error on builtin-test.c. The error is as following: $ make CC perf.o CC builtin-test.o cc1: warnings being treated as errors builtin-test.c: In function ‘sched__get_first_possible_cpu’: builtin-test.c:977: warning: implicit declaration of function ‘CPU_ALLOC’ builtin-test.c:977: warning: nested extern declaration of ‘CPU_ALLOC’ builtin-test.c:977: warning: assignment makes pointer from integer without a cast builtin-test.c:978: warning: implicit declaration of function ‘CPU_ALLOC_SIZE’ builtin-test.c:978: warning: nested extern declaration of ‘CPU_ALLOC_SIZE’ builtin-test.c:979: warning: implicit declaration of function ‘CPU_ZERO_S’ builtin-test.c:979: warning: nested extern declaration of ‘CPU_ZERO_S’ builtin-test.c:982: warning: implicit declaration of function ‘CPU_FREE’ builtin-test.c:982: warning: nested extern declaration of ‘CPU_FREE’ builtin-test.c:992: warning: implicit declaration of function ‘CPU_ISSET_S’ builtin-test.c:992: warning: nested extern declaration of ‘CPU_ISSET_S’ builtin-test.c:998: warning: implicit declaration of function ‘CPU_CLR_S’ builtin-test.c:998: warning: nested extern declaration of ‘CPU_CLR_S’ make: *** [builtin-test.o] Error 1 This problem is introduced in 3e7c439a. CPU_ALLOC and related macros are missing in sched__get_first_possible_cpu function. In 54489c18, commiter mentioned that CPU_ALLOC has been removed. So CPU_ALLOC calls in this function are removed to let perf to be built. Signed-off-by: Vinson Lee <vlee@twitter.com> Signed-off-by: Zheng Liu <wenqing.lz@taobao.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Vinson Lee <vlee@twitter.com> Cc: Zheng Liu <wenqing.lz@taobao.com> Link: http://lkml.kernel.org/r/1352422726-31114-1-git-send-email-vlee@twitter.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17cdc-acm: implement TIOCSSERIAL to avoid blocking close(2)Dan Williams
commit ba2d8ce9db0a61505362bb17b8899df3d3326146 upstream. Some devices (ex Nokia C7) simply don't respond at all when data is sent to some of their USB interfaces. The data gets stuck in the TTYs queue and sits there until close(2), which them blocks because closing_wait defaults to 30 seconds (even though the fd is O_NONBLOCK). This is rarely desired. Implement the standard mechanism to adjust closing_wait and let applications handle it how they want to. See also 02303f73373aa1da19dbec510ec5a4e2576f9610 for usb_wwan.c. Signed-off-by: Dan Williams <dcbw@redhat.com> Acked-by: Oliver Neukum <oneukum@suse.de> Tested-by: Aleksander Morgado <aleksander@gnu.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17ring-buffer: Fix race between integrity check and readersSteven Rostedt
commit 9366c1ba13fbc41bdb57702e75ca4382f209c82f upstream. The function rb_check_pages() was added to make sure the ring buffer's pages were sane. This check is done when the ring buffer size is modified as well as when the iterator is released (closing the "trace" file), as that was considered a non fast path and a good place to do a sanity check. The problem is that the check does not have any locks around it. If one process were to read the trace file, and another were to read the raw binary file, the check could happen while the reader is reading the file. The issues with this is that the check requires to clear the HEAD page before doing the full check and it restores it afterward. But readers require the HEAD page to exist before it can read the buffer, otherwise it gives a nasty warning and disables the buffer. By adding the reader lock around the check, this keeps the race from happening. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17ring-buffer: Fix NULL pointer if rb_set_head_page() failsSteven Rostedt
commit 54f7be5b831254199522523ccab4c3d954bbf576 upstream. The function rb_set_head_page() searches the list of ring buffer pages for a the page that has the HEAD page flag set. If it does not find it, it will do a WARN_ON(), disable the ring buffer and return NULL, as this should never happen. But if this bug happens to happen, not all callers of this function can handle a NULL pointer being returned from it. That needs to be fixed. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17ftrace: Clear bits properly in reset_iter_read()Dan Carpenter
commit 70f77b3f7ec010ff9624c1f2e39a81babc9e2429 upstream. There is a typo here where '&' is used instead of '|' and it turns the statement into a noop. The original code is equivalent to: iter->flags &= ~((1 << 2) & (1 << 4)); Link: http://lkml.kernel.org/r/20120609161027.GD6488@elgon.mountain Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17xhci: Extend Fresco Logic MSI quirk.Sarah Sharp
commit bba18e33f25072ebf70fd8f7f0cdbf8cdb59a746 upstream. Ali reports that plugging a device into the Fresco Logic xHCI host with PCI device ID 1400 produces an IRQ error: do_IRQ: 3.176 No irq handler for vector (irq -1) Other early Fresco Logic host revisions don't support MSI, even though their PCI config space claims they do. Extend the quirk to disabling MSI to this chipset revision. Also enable the short transfer quirk, since it's likely this revision also has that quirk, and it should be harmless to enable. 04:00.0 0c03: 1b73:1400 (rev 01) (prog-if 30 [XHCI]) Subsystem: 1d5c:1000 Physical Slot: 3 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 51 Region 0: Memory at d4600000 (32-bit, non-prefetchable) [size=64K] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000feeff00c Data: 41b1 Capabilities: [80] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <2us, L1 <32us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 unlimited, L1 unlimited ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Kernel driver in use: xhci_hcd This patch should be backported to stable kernels as old as 2.6.36, that contain the commit f5182b4155b9d686c5540a6822486400e34ddd98 "xhci: Disable MSI for some Fresco Logic hosts." Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reported-by: A Sh <smr.ash1991@gmail.com> Tested-by: A Sh <smr.ash1991@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17USB: OHCI: workaround for hardware bug: retired TDs not added to the Done QueueAlan Stern
commit 50ce5c0683aa83eb161624ea89daa5a9eee0c2ce upstream. This patch (as1636) is a partial workaround for a hardware bug affecting OHCI controllers by NVIDIA at least, maybe others too. When the controller retires a Transfer Descriptor, it is supposed to add the TD onto the Done Queue. But sometimes this doesn't happen, with the result that ohci-hcd never realizes the corresponding transfer has finished. Symptoms can vary; a typical result is that USB audio stops working after a while. The patch works around the problem by recognizing that TDs are always processed in order. Therefore, if a later TD is found on the Done Queue than all the earlier TDs for the same endpoint must be finished as well. Unfortunately this won't solve the problem in cases where the missing TD is the last one in the endpoint's queue. A complete fix would require a signficant amount of change to the driver. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17ACPI / video: Add "Asus UL30VT" to ACPI video detect blacklistLan Tianyu
commit d0c2ce16bec0afa6013b4c5220ca4c9c67210215 upstream. The ACPI video driver can't control backlight correctly on Asus UL30VT. Vendor driver (asus-laptop) can work. This patch is to add "Asus UL30VT" to ACPI video detect blacklist in order to use asus-laptop for video control on the "Asus UL30VT" rather than ACPI video driver. References: https://bugzilla.kernel.org/show_bug.cgi?id=32592 Reported-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17ACPI / video: ignore BIOS initial backlight value for HP Folio 13-2000Zhang Rui
commit 129ff8f8d58297b04f47b5d6fad81aa2d08404e1 upstream. Or else the laptop will boot with a dimmed screen. References: https://bugzilla.kernel.org/show_bug.cgi?id=51141 Tested-by: Stefan Nagy <public@stefan-nagy.at> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17ACPI / PNP: Do not crash due to stale pointer use during system resumeRafael J. Wysocki
commit a6b5e88c0e42093b9057856f35770966c8c591e3 upstream. During resume from system suspend the 'data' field of struct pnp_dev in pnpacpi_set_resources() may be a stale pointer, due to removal of the associated ACPI device node object in the previous suspend-resume cycle. This happens, for example, if a dockable machine is booted in the docking station and then suspended and resumed and suspended again. If that happens, pnpacpi_build_resource_template() called from pnpacpi_set_resources() attempts to use that pointer and crashes. However, pnpacpi_set_resources() actually checks the device's ACPI handle, attempts to find the ACPI device node object attached to it and returns an error code if that fails, so in fact it knows what the correct value of dev->data should be. Use this observation to update dev->data with the correct value if necessary and dump a call trace if that's the case (once). We still need to fix the root cause of this issue, but preventing systems from crashing because of it is an improvement too. Reported-and-tested-by: Zdenek Kabelac <zdenek.kabelac@gmail.com> References: https://bugzilla.kernel.org/show_bug.cgi?id=51071 Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17ACPI / PM: Add Sony Vaio VPCEB1S1E to nonvs blacklist.Lan Tianyu
commit 876ab79055019e248508cfd0dee7caa3c0c831ed upstream. Sony Vaio VPCEB1S1E does not resume correctly without acpi_sleep=nonvs, so add it to the ACPI sleep blacklist. References: https://bugzilla.kernel.org/show_bug.cgi?id=48781 Reported-by: Sébastien Wilmet <swilmet@gnome.org> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17ACPI / battery: Correct battery capacity values on ThinkpadsKamil Iskra
commit 4000e626156935dfb626321ce09cae2c833eabbb upstream. Add a quirk to correctly report battery capacity on 2010 and 2011 Lenovo Thinkpad models. The affected models that I tested (x201, t410, t410s, and x220) exhibit a problem where, when battery capacity reporting unit is mAh, the values being reported are wrong. Pre-2010 and 2012 models appear to always report in mWh and are thus unaffected. Also, in mid-2012 Lenovo issued a BIOS update for the 2011 models that fixes the issue (tested on x220 with a post-1.29 BIOS). No such update is available for the 2010 models, so those still need this patch. Problem description: for some reason, the affected Thinkpads switch the reporting unit between mAh and mWh; generally, mAh is used when a laptop is plugged in and mWh when it's unplugged, although a suspend/resume or rmmod/modprobe is needed for the switch to take effect. The values reported in mAh are *always* wrong. This does not appear to be a kernel regression; I believe that the values were never reported correctly. I tested back to kernel 2.6.34, with multiple machines and BIOS versions. Simply plugging a laptop into mains before turning it on is enough to reproduce the problem. Here's a sample /proc/acpi/battery/BAT0/info from Thinkpad x220 (before a BIOS update) with a 4-cell battery: present: yes design capacity: 2886 mAh last full capacity: 2909 mAh battery technology: rechargeable design voltage: 14800 mV design capacity warning: 145 mAh design capacity low: 13 mAh cycle count: 0 capacity granularity 1: 1 mAh capacity granularity 2: 1 mAh model number: 42T4899 serial number: 21064 battery type: LION OEM info: SANYO Once the laptop switches the unit to mWh (unplug from mains, suspend, resume), the output changes to: present: yes design capacity: 28860 mWh last full capacity: 29090 mWh battery technology: rechargeable design voltage: 14800 mV design capacity warning: 1454 mWh design capacity low: 200 mWh cycle count: 0 capacity granularity 1: 1 mWh capacity granularity 2: 1 mWh model number: 42T4899 serial number: 21064 battery type: LION OEM info: SANYO Can you see how the values for "design capacity", etc., differ by a factor of 10 instead of 14.8 (the design voltage of this battery)? On the battery itself it says: 14.8V, 1.95Ah, 29Wh, so clearly the values reported in mWh are correct and the ones in mAh are not. My guess is that this problem has been around ever since those machines were released, but because the most common Thinkpad batteries are rated at 10.8V, the error (8%) is small enough that it simply hasn't been noticed or at least nobody could be bothered to look into it. My patch works around the problem by adjusting the incorrectly reported mAh values by "10000 / design_voltage". The patch also has code to figure out if it should be activated or not. It only activates on Lenovo Thinkpads, only when the unit is mAh, and, as an extra precaution, only when the battery capacity reported through ACPI does not match what is reported through DMI (I've never encountered a machine where the first two conditions would be true but the last would not, but better safe than sorry). I've been using this patch for close to a year on several systems without any problems. References: https://bugzilla.kernel.org/show_bug.cgi?id=41062 Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17USB: mark uas driver as BROKENGreg Kroah-Hartman
commit fb37ef98015f864d22be223a0e0d93547cd1d4ef upstream. As reported https://bugzilla.kernel.org/show_bug.cgi?id=51031, the UAS driver causes problems and has been asked to be not built into any of the major distributions. To prevent users from running into problems with it, and for distros that were not notified, just mark the whole thing as broken. Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17USB: cp210x: add Virtenio Preon32 device idMarkus Becker
commit 356fe44f4b8ece867bdb9876b1854d7adbef9de2 upstream. Signed-off-by: Markus Becker <mab@comnets.uni-bremen.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17usb: ftdi_sio: fixup BeagleBone A5+ quirkPeter Korsgaard
commit 1a88d5eee2ef2ad1d3c4e32043e9c4c5347d4fc1 upstream. BeagleBone A5+ devices ended up getting shipped with the 'BeagleBone/XDS100V2' product string, and not XDS100 like it was agreed, so adjust the quirk to match. For details, see the thread on the beagle list: https://groups.google.com/forum/#!msg/beagleboard/zrFPew9_Wvo/ibWr1-eE8JwJ Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17USB: ftdi_sio: Add support for Newport AGILIS motor driversMartin Teichmann
commit d7e14b375b40c04cd735b115713043b69a2c68ac upstream. The Newport AGILIS model AG-UC8 compact piezo motor controller (http://search.newport.com/?q=*&x2=sku&q2=AG-UC8) is yet another device using an FTDI USB-to-serial chip. It works fine with the ftdi_sio driver when adding options ftdi-sio product=0x3000 vendor=0x104d to modprobe.d. udevadm reports "Newport" as the manufacturer, and "Agilis" as the product name. Signed-off-by: Martin Teichmann <lkb.teichmann@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17USB: option: blacklist network interface on Huawei E173Bjørn Mork
commit f36446cf9bbebaa03a80d95cfeeafbaf68218249 upstream. The Huawei E173 will normally appear as 12d1:1436 in Linux. But the modem has another mode with different device ID and a slightly different set of descriptors. This is the mode used by Windows like this: 3Modem: USB\VID_12D1&PID_140C&MI_00\6&3A1D2012&0&0000 Networkcard: USB\VID_12D1&PID_140C&MI_01\6&3A1D2012&0&0001 Appli.Inter: USB\VID_12D1&PID_140C&MI_02\6&3A1D2012&0&0002 PC UI Inter: USB\VID_12D1&PID_140C&MI_03\6&3A1D2012&0&0003 All interfaces have the same ff/ff/ff class codes in this mode. Blacklisting the network interface to allow it to be picked up by the network driver. Reported-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17USB: add new zte 3g-dongle's pid to option.cli.rui27@zte.com.cn
commit 31b6a1048b7292efff8b5b53ae3d9d29adde385e upstream. Signed-off-by: Rui li <li.rui27@zte.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17x86: hpet: Fix masking of MSI interruptsJan Beulich
commit 6acf5a8c931da9d26c8dd77d784daaf07fa2bff0 upstream. HPET_TN_FSB is not a proper mask bit; it merely toggles between MSI and legacy interrupt delivery. The proper mask bit is HPET_TN_ENABLE, so use both bits when (un)masking the interrupt. Signed-off-by: Jan Beulich <jbeulich@suse.com> Link: http://lkml.kernel.org/r/5093E09002000078000A60E6@nat28.tlf.novell.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17floppy: destroy floppy workqueue before cleaning up the queueJiri Kosina
commit eac7cc52c6b410e542af431b2ee93f3d7dbfb6af upstream. We need to first destroy the floppy_wq workqueue before cleaning up the queue. Otherwise we might race with still pending work with the workqueue, but all the block queue already gone. This might lead to various oopses, such as CPU 0 Pid: 6, comm: kworker/u:0 Not tainted 3.7.0-rc4 #1 Bochs Bochs RIP: 0010:[<ffffffff8134eef5>] [<ffffffff8134eef5>] blk_peek_request+0xd5/0x1c0 RSP: 0000:ffff88000dc7dd88 EFLAGS: 00010092 RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88000f602688 RSI: ffffffff81fd95d8 RDI: 6b6b6b6b6b6b6b6b RBP: ffff88000dc7dd98 R08: ffffffff81fd95c8 R09: 0000000000000000 R10: ffffffff81fd9480 R11: 0000000000000001 R12: 6b6b6b6b6b6b6b6b R13: ffff88000dc7dfd8 R14: ffff88000dc7dfd8 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffffff81e21000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 0000000001e11000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process kworker/u:0 (pid: 6, threadinfo ffff88000dc7c000, task ffff88000dc5ecc0) Stack: 0000000000000000 0000000000000000 ffff88000dc7ddb8 ffffffff8134efee ffff88000dc7ddb8 0000000000000000 ffff88000dc7dde8 ffffffff814aef3c ffffffff81e75d80 ffff88000dc0c640 ffff88000fbfb000 ffffffff814aed90 Call Trace: [<ffffffff8134efee>] blk_fetch_request+0xe/0x30 [<ffffffff814aef3c>] redo_fd_request+0x1ac/0x400 [<ffffffff814aed90>] ? start_motor+0x130/0x130 [<ffffffff8106b526>] process_one_work+0x136/0x450 [<ffffffff8106af65>] ? manage_workers+0x205/0x2e0 [<ffffffff8106bb6d>] worker_thread+0x14d/0x420 [<ffffffff8106ba20>] ? rescuer_thread+0x1a0/0x1a0 [<ffffffff8107075a>] kthread+0xba/0xc0 [<ffffffff810706a0>] ? __kthread_parkme+0x80/0x80 [<ffffffff818b553a>] ret_from_fork+0x7a/0xb0 [<ffffffff810706a0>] ? __kthread_parkme+0x80/0x80 Code: 0f 84 c0 00 00 00 83 f8 01 0f 85 e2 00 00 00 81 4b 40 00 00 80 00 48 89 df e8 58 f8 ff ff be fb ff ff ff fe ff ff <49> 8b 1c 24 49 39 dc 0f 85 2e ff ff ff 41 0f b6 84 24 28 04 00 RIP [<ffffffff8134eef5>] blk_peek_request+0xd5/0x1c0 RSP <ffff88000dc7dd88> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Tested-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17x86,AMD: Power driver support for AMD's family 16h processorsBoris Ostrovsky
commit 22e32f4f57778ebc6e17812fa3008361c05d64f9 upstream. Add family 16h PCI ID to AMD's power driver to allow it report power consumption on these processors. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@amd.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17mm: dmapool: use provided gfp flags for all dma_alloc_coherent() callsMarek Szyprowski
commit 387870f2d6d679746020fa8e25ef786ff338dc98 upstream. dmapool always calls dma_alloc_coherent() with GFP_ATOMIC flag, regardless the flags provided by the caller. This causes excessive pruning of emergency memory pools without any good reason. Additionaly, on ARM architecture any driver which is using dmapools will sooner or later trigger the following error: "ERROR: 256 KiB atomic DMA coherent pool is too small! Please increase it with coherent_pool= kernel parameter!". Increasing the coherent pool size usually doesn't help much and only delays such error, because all GFP_ATOMIC DMA allocations are always served from the special, very limited memory pool. This patch changes the dmapool code to correctly use gfp flags provided by the dmapool caller. Reported-by: Soeren Moch <smoch@web.de> Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Soeren Moch <smoch@web.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17drm/i915: do not default to 18 bpp for eDP if missing from VBTJani Nikula
commit 9a30a61f3516871c5c638fd7c025fbaa11ddf7fe upstream. commit 500a8cc466a24e2fbc4c86ef9c6467ae2ffdeb0c Author: Zhenyu Wang <zhenyuw@linux.intel.com> Date: Wed Jan 13 11:19:52 2010 +0800 drm/i915: parse eDP panel color depth from VBT block originally introduced parsing bpp for eDP from VBT, with a default of 18 bpp if the eDP BIOS data block is not present. Turns out that default seems to break the Macbook Pro with retina display, as noted in commit 4344b813f105a19f793f1fd93ad775b784648b95 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Aug 10 11:10:20 2012 +0200 drm/i915: ignore eDP bpc settings from vbt Since we can't ignore bpc settings from VBT completely after all, get rid of the default. Do not clamp eDP to 18 bpp by default if the eDP BDB is missing from VBT. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> [danvet: paste in the updated commit message from irc.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17drm/i915: do not ignore eDP bpc settings from vbtJani Nikula
commit 2f4f649a69a9eb51f6e98130e19dd90a260a4145 upstream. There are laptops out there that need the eDP bpc from VBT. This is effectively a revert of commit 4344b813f105a19f793f1fd93ad775b784648b95 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Aug 10 11:10:20 2012 +0200 drm/i915: ignore eDP bpc settings from vbt but putting the VBT check after the EDID check to see them both in dmesg if this clamps more than the EDID. We have enough history with bpc clamping to warrant the extra debug info. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=47641 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56401 Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17workqueue: convert BUG_ON()s in __queue_delayed_work() to WARN_ON_ONCE()sTejun Heo
commit fc4b514f2727f74a4587c31db87e0e93465518c3 upstream. 8852aac25e ("workqueue: mod_delayed_work_on() shouldn't queue timer on 0 delay") unexpectedly uncovered a very nasty abuse of delayed_work in megaraid - it allocated work_struct, casted it to delayed_work and then pass that into queue_delayed_work(). Previously, this was okay because 0 @delay short-circuited to queue_work() before doing anything with delayed_work. 8852aac25e moved 0 @delay test into __queue_delayed_work() after sanity check on delayed_work making megaraid trigger BUG_ON(). Although megaraid is already fixed by c1d390d8e6 ("megaraid: fix BUG_ON() from incorrect use of delayed work"), this patch converts BUG_ON()s in __queue_delayed_work() to WARN_ON_ONCE()s so that such abusers, if there are more, trigger warning but don't crash the machine. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Xiaotian Feng <xtfeng@gmail.com> Signed-off-by: Shuah Khan <shuah.khan@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17edac: Fix the dimm filling for csrows-based layoutsMauro Carvalho Chehab
commit 24bef66e74d647aebd34e0bef7693512b7912029 upstream. The driver is currently filling data in a wrong way, on drivers for csrows-based memory controller, when the first layer is a csrow. This is not easily to notice, as, in general, memories are filed in dual, interleaved, symetric mode, as very few memory controllers support asymetric modes. While digging into a bug for i82795_edac driver, the asymetric mode there is now working, allowing us to fill the machine with 4x1GB ranks at channel 0, and 2x512GB at channel 1: Channel 0 ranks: EDAC DEBUG: i82975x_init_csrows: DIMM A0: from page 0x00000000 to 0x0003ffff (size: 0x00040000 pages) EDAC DEBUG: i82975x_init_csrows: DIMM A1: from page 0x00040000 to 0x0007ffff (size: 0x00040000 pages) EDAC DEBUG: i82975x_init_csrows: DIMM A2: from page 0x00080000 to 0x000bffff (size: 0x00040000 pages) EDAC DEBUG: i82975x_init_csrows: DIMM A3: from page 0x000c0000 to 0x000fffff (size: 0x00040000 pages) Channel 1 ranks: EDAC DEBUG: i82975x_init_csrows: DIMM B0: from page 0x00100000 to 0x0011ffff (size: 0x00020000 pages) EDAC DEBUG: i82975x_init_csrows: DIMM B1: from page 0x00120000 to 0x0013ffff (size: 0x00020000 pages) Instead of properly showing the memories as such, before this patch, it shows the memory layout as: +-----------------------------------+ | mc0 | | csrow0 | csrow1 | csrow2 | ----------+-----------------------------------+ channel1: | 1024 MB | 1024 MB | 512 MB | channel0: | 1024 MB | 1024 MB | 512 MB | ----------+-----------------------------------+ as if both channels were symetric, grouping the DIMMs on a wrong layout. After this patch, the memory is correctly represented. So, for csrows at layers[0], it shows: +-----------------------------------------------+ | mc0 | | csrow0 | csrow1 | csrow2 | csrow3 | ----------+-----------------------------------------------+ channel1: | 512 MB | 512 MB | 0 MB | 0 MB | channel0: | 1024 MB | 1024 MB | 1024 MB | 1024 MB | ----------+-----------------------------------------------+ For csrows at layers[1], it shows: +-----------------------+ | mc0 | | channel0 | channel1 | --------+-----------------------+ csrow3: | 1024 MB | 0 MB | csrow2: | 1024 MB | 0 MB | --------+-----------------------+ csrow1: | 1024 MB | 512 MB | csrow0: | 1024 MB | 512 MB | --------+-----------------------+ So, no matter of what comes first, the information between channel and csrow will be properly represented. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: CAI Qian <caiqian@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17i82975x_edac: Fix dimm label initialization