aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-11-26crypto: cryptd - disable softirqs in cryptd_queue_worker to prevent data ↵Jussi Kivilinna
corruption commit 9efade1b3e981f5064f9db9ca971b4dc7557ae42 upstream. cryptd_queue_worker attempts to prevent simultaneous accesses to crypto workqueue by cryptd_enqueue_request using preempt_disable/preempt_enable. However cryptd_enqueue_request might be called from softirq context, so add local_bh_disable/local_bh_enable to prevent data corruption and panics. Bug report at http://marc.info/?l=linux-crypto-vger&m=134858649616319&w=2 v2: - Disable software interrupts instead of hardware interrupts Reported-by: Gurucharan Shetty <gurucharan.shetty@gmail.com> Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-26cifs: Do not lookup hashed negative dentry in cifs_atomic_openSachin Prabhu
commit 3798f47aa276b332c30da499cb4df4577e2f8872 upstream. We do not need to lookup a hashed negative directory since we have already revalidated it before and have found it to be fine. This also prevents a crash in cifs_lookup() when it attempts to rehash the already hashed negative lookup dentry. The patch has been tested using the reproducer at https://bugzilla.redhat.com/show_bug.cgi?id=867344#c28 Reported-by: Vit Zahradka <vit.zahradka@tiscali.cz> Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-26cifs: fix potential buffer overrun in cifs.idmap handling codeJeff Layton
commit 36960e440ccf94349c09fb944930d3bfe4bc473f upstream. The userspace cifs.idmap program generally works with the wbclient libs to generate binary SIDs in userspace. That program defines the struct that holds these values as having a max of 15 subauthorities. The kernel idmapping code however limits that value to 5. When the kernel copies those values around though, it doesn't sanity check the num_subauths value handed back from userspace or from the server. It's possible therefore for userspace to hand us back a bogus num_subauths value (or one that's valid, but greater than 5) that could cause the kernel to walk off the end of the cifs_sid->sub_auths array. Fix this by defining a new routine for copying sids and using that in all of the places that copy it. If we end up with a sid that's longer than expected then this approach will just lop off the "extra" subauths, but that's basically what the code does today already. Better approaches might be to fix this code to reject SIDs with >5 subauths, or fix it to handle the subauths array dynamically. At the same time, change the kernel to check the length of the data returned by userspace. If it's shorter than struct cifs_sid, reject it and return -EIO. If that happens we'll end up with fields that are basically uninitialized. Long term, it might make sense to redefine cifs_sid using a flexarray at the end, to allow for variable-length subauth lists, and teach the code to handle the case where the subauths array being passed in from userspace is shorter than 5 elements. Note too, that I don't consider this a security issue since you'd need a compromised cifs.idmap program. If you have that, you can do all sorts of nefarious stuff. Still, this is probably reasonable for stable. Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-26virtio: Don't access index after unregister.Cornelia Huck
commit 237242bddc99041e15a4ca51b8439657cadaff17 upstream. Virtio wants to release used indices after the corresponding virtio device has been unregistered. However, virtio does not hold an extra reference, giving up its last reference with device_unregister(), making accessing dev->index afterwards invalid. I actually saw problems when testing my (not-yet-merged) virtio-ccw code: - device_add virtio-net,id=xxx -> creates device virtio<n> with n>0 - device_del xxx -> deletes virtio<n>, but calls ida_simple_remove with an index of 0 - device_add virtio-net,id=xxx -> tries to add virtio0, which is still in use... So let's save the index we want to release before calling device_unregister(). Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Acked-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-26module: fix out-by-one error in kallsymsRusty Russell
commit 59ef28b1f14899b10d6b2682c7057ca00a9a3f47 upstream. Masaki found and patched a kallsyms issue: the last symbol in a module's symtab wasn't transferred. This is because we manually copy the zero'th entry (which is always empty) then copy the rest in a loop starting at 1, though from src[0]. His fix was minimal, I prefer to rewrite the loops in more standard form. There are two loops: one to get the size, and one to copy. Make these identical: always count entry 0 and any defined symbol in an allocated non-init section. This bug exists since the following commit was introduced. module: reduce symbol table for loaded modules (v2) commit: 4a4962263f07d14660849ec134ee42b63e95ea9a LKML: http://lkml.org/lkml/2012/10/24/27 Reported-by: Masaki Kimura <masaki.kimura.kz@hitachi.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-26fanotify: fix missing breakEric Paris
commit 848561d368751a1c0f679b9f045a02944506a801 upstream. Anders Blomdell noted in 2010 that Fanotify lost events and provided a test case. Eric Paris confirmed it was a bug and posted a fix to the list https://groups.google.com/forum/?fromgroups=#!topic/linux.kernel/RrJfTfyW2BE but never applied it. Repeated attempts over time to actually get him to apply it have never had a reply from anyone who has raised it So apply it anyway Signed-off-by: Alan Cox <alan@linux.intel.com> Reported-by: Anders Blomdell <anders.blomdell@control.lth.se> Cc: Eric Paris <eparis@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-26PCI/PM: Fix proc config reg access for D3cold and bridge suspendingHuang Ying
commit b3c32c4f9565f93407921c0d8a4458042eb8998e upstream. In https://bugzilla.kernel.org/show_bug.cgi?id=48981 Peter reported that /proc/bus/pci/??/??.? does not work for 3.6. This is because the device configuration space registers are not accessible if the corresponding parent bridge is suspended or the device is put into D3cold state. This is the same as /sys/bus/pci/devices/0000:??:??.?/config access issue. So the function used to solve sysfs issue is used to solve this issue. This patch moves pci_config_pm_runtime_get()/_put() from pci/pci-sysfs.c to pci/pci.c and makes them extern so they can be used by both the sysfs and proc paths. [bhelgaas: changelog, references, reporters] Reference: https://bugzilla.kernel.org/show_bug.cgi?id=48981 Reference: https://bugzilla.kernel.org/show_bug.cgi?id=49031 Reported-by: Forrest Loomis <cybercyst@gmail.com> Reported-by: Peter <lekensteyn@gmail.com> Reported-by: Micael Dias <kam1kaz3@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-26PCI/PM: Resume device before shutdownHuang Ying
commit 3ff2de9ba1a2e22e548979dbcd46e999b22c93d8 upstream. Some actions during shutdown need device to be in D0 state, such as MSI shutdown etc, so resume device before shutdown. Without this patch, a device may not be enumerated after a kexec because the corresponding bridge is not in D0, so that configuration space of the device is not accessible. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-26mac80211: call skb_dequeue/ieee80211_free_txskb instead of __skb_queue_purgeFelix Fietkau
commit 1f98ab7fef48a2968f37f422c256c9fbd978c3f0 upstream. Fixes more wifi status skb leaks, leading to hostapd/wpa_supplicant hangs. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-26mac80211: don't send null data packet when not associatedJohannes Berg
commit 20f544eea03db4b498942558b882d463ce575c3e upstream. On resume or firmware recovery, mac80211 sends a null data packet to see if the AP is still around and hasn't disconnected us. However, it always does this even if it wasn't even connected before, leading to a warning in the new channel context code. Fix this by checking that it's associated. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-26mac80211: sync acccess to tx_filtered/ps_tx_buf queuesArik Nemtsov
commit 987c285c2ae2e4e32aca3a9b3252d28171c75711 upstream. These are accessed without a lock when ending STA PSM. If the sta_cleanup timer accesses these lists at the same time, we might crash. This may fix some mysterious crashes we had during ieee80211_sta_ps_deliver_wakeup. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-26xfs: drop buffer io reference when a bad bio is builtDave Chinner
commit d69043c42d8c6414fa28ad18d99973aa6c1c2e24 upstream. Error handling in xfs_buf_ioapply_map() does not handle IO reference counts correctly. We increment the b_io_remaining count before building the bio, but then fail to decrement it in the failure case. This leads to the buffer never running IO completion and releasing the reference that the IO holds, so at unmount we can leak the buffer. This leak is captured by this assert failure during unmount: XFS: Assertion failed: atomic_read(&pag->pag_ref) == 0, file: fs/xfs/xfs_mount.c, line: 273 This is not a new bug - the b_io_remaining accounting has had this problem for a long, long time - it's just very hard to get a zero length bio being built by this code... Further, the buffer IO error can be overwritten on a multi-segment buffer by subsequent bio completions for partial sections of the buffer. Hence we should only set the buffer error status if the buffer is not already carrying an error status. This ensures that a partial IO error on a multi-segment buffer will not be lost. This part of the problem is a regression, however. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-26libata-acpi: Fix NULL ptr derference in ata_acpi_dev_handleAaron Lu
commit 60817a680b1bd3341b6909fab7d8a1fcc3a78369 upstream. commit 6b66d95895c149cbc04d4fac5a2f5477c543a8ae didn't handle SATA PMP case in ata_acpi_bind_device and will cause a NULL ptr dereference when user attached a SATA drive to the PMP port. Fix this by checking PMP support. This bug is reported by Dan van der Ster in the following bugzilla page: https://bugzilla.kernel.org/show_bug.cgi?id=48211 Reported-by: Dan van der Ster <dan@vanderster.com> Tested-by: Dan van der Ster <dan@vanderster.com> Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Tested-by: Simon <tangouniform@sbcglobal.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-26mm: bugfix: set current->reclaim_state to NULL while returning from kswapd()Takamori Yamaguchi
commit b0a8cc58e6b9aaae3045752059e5e6260c0b94bc upstream. In kswapd(), set current->reclaim_state to NULL before returning, as current->reclaim_state holds reference to variable on kswapd()'s stack. In rare cases, while returning from kswapd() during memory offlining, __free_slab() and freepages() can access the dangling pointer of current->reclaim_state. Signed-off-by: Takamori Yamaguchi <takamori.yamaguchi@jp.sony.com> Signed-off-by: Aaditya Kumar <aaditya.kumar@ap.sony.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17Linux 3.6.7v3.6.7Greg Kroah-Hartman
2012-11-17ALSA: usb-audio: Fix mutex deadlock at disconnectionTakashi Iwai
commit 10e44239f67d0b6fb74006e61a7e883b8075247a upstream. The recent change for USB-audio disconnection race fixes introduced a mutex deadlock again. There is a circular dependency between chip->shutdown_rwsem and pcm->open_mutex, depicted like below, when a device is opened during the disconnection operation: A. snd_usb_audio_disconnect() -> card.c::register_mutex -> chip->shutdown_rwsem (write) -> snd_card_disconnect() -> pcm.c::register_mutex -> pcm->open_mutex B. snd_pcm_open() -> pcm->open_mutex -> snd_usb_pcm_open() -> chip->shutdown_rwsem (read) Since the chip->shutdown_rwsem protection in the case A is required only for turning on the chip->shutdown flag and it doesn't have to be taken for the whole operation, we can reduce its window in snd_usb_audio_disconnect(). Reported-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17ALSA: Fix card refcount unbalanceTakashi Iwai
commit 8bb4d9ce08b0a92ca174e41d92c180328f86173f upstream. There are uncovered cases whether the card refcount introduced by the commit a0830dbd isn't properly increased or decreased: - OSS PCM and mixer success paths - When lookup function gets NULL This patch fixes these places. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=50251 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17xfs: fix buffer shudown reference count mismatchDave Chinner
commit 03b1293edad462ad1ad62bcc5160c76758e450d5 upstream. When we shut down the filesystem, we have to unpin and free all the buffers currently active in the CIL. To do this we unpin and remove them in one operation as a result of a failed iclogbuf write. For buffers, we do this removal via a simultated IO completion of after marking the buffer stale. At the time we do this, we have two references to the buffer - the active LRU reference and the buf log item. The LRU reference is removed by marking the buffer stale, and the active CIL reference is by the xfs_buf_iodone() callback that is run by xfs_buf_do_callbacks() during ioend processing (via the bp->b_iodone callback). However, ioend processing requires one more reference - that of the IO that it is completing. We don't have this reference, so we free the buffer prematurely and use it after it is freed. For buffers marked with XBF_ASYNC, this leads to assert failures in xfs_buf_rele() on debug kernels because the b_hold count is zero. Fix this by making sure we take the necessary IO reference before starting IO completion processing on the stale buffer, and set the XBF_ASYNC flag to ensure that IO completion processing removes all the active references from the buffer to ensure it is fully torn down. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17xfs: fix reading of wrapped log dataDave Chinner
commit 6ce377afd1755eae5c93410ca9a1121dfead7b87 upstream. Commit 4439647 ("xfs: reset buffer pointers before freeing them") in 3.0-rc1 introduced a regression when recovering log buffers that wrapped around the end of log. The second part of the log buffer at the start of the physical log was being read into the header buffer rather than the data buffer, and hence recovery was seeing garbage in the data buffer when it got to the region of the log buffer that was incorrectly read. Reported-by: Torsten Kaiser <just.for.lkml@googlemail.com> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17GFS2: Test bufdata with buffer locked and gfs2_log_lock heldBenjamin Marzinski
commit 96e5d1d3adf56f1c7eeb07258f6a1a0a7ae9c489 upstream. In gfs2_trans_add_bh(), gfs2 was testing if a there was a bd attached to the buffer without having the gfs2_log_lock held. It was then assuming it would stay attached for the rest of the function. However, without either the log lock being held of the buffer locked, __gfs2_ail_flush() could detach bd at any time. This patch moves the locking before the test. If there isn't a bd already attached, gfs2 can safely allocate one and attach it before locking. There is no way that the newly allocated bd could be on the ail list, and thus no way for __gfs2_ail_flush() to detach it. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17drm/radeon/si: add some missing regs to the VM reg checkerAlex Deucher
commit f418b88aad0c42b4caf4d79a0cf8d14a5d0a2284 upstream. This register is needed for streamout to work properly. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17drm/radeon/cayman: add some missing regs to the VM reg checkerAlex Deucher
commit 860fe2f05fa2eacac84368e23547ec8cf3cc6652 upstream. These regs were being wronly rejected leading to rendering issues. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=56876 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17drm/vmwgfx: Fix a case where the code would BUG when trying to pin GMR memoryThomas Hellstrom
commit afcc87aa6a233e52df73552dc1dc9ae3881b7cc8 upstream. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Dmitry Torokhov <dtor@vmware.com> Cc: linux-graphics-maintainer@vmware.com Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17drm/vmwgfx: Fix hibernation device resetThomas Hellstrom
commit 95e8f6a21996c4cc2c4574b231c6e858b749dce3 upstream. The device would not reset properly when resuming from hibernation. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Dmitry Torokhov <dtor@vmware.com> Cc: linux-graphics-maintainer@vmware.com Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17mmc: sdhci: fix NULL dereference in sdhci_request() tuningChris Ball
commit 14efd957209461bbdf285bf0d67e931955d04a4c upstream. Commit 473b095a72a9 ("mmc: sdhci: fix incorrect command used in tuning") introduced a NULL dereference at resume-time if an SD 3.0 host controller raises the SDHCI_NEEDS_TUNING flag while no card is inserted. Seen on an OLPC XO-4 with sdhci-pxav3, but presumably affects other controllers too. Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17mmc: sh_mmcif: fix use after freeGuennadi Liakhovetski
commit a0d28ba01ebd048b4ba418142b37f5cf80e6d156 upstream. A recent commit "mmc: sh_mmcif: fix clock management" has introduced a use after free bug in sh_mmcif.c: in sh_mmcif_remove() the call to mmc_free_host() frees private driver data, therefore using it afterwards is a bug. Revert that hunk. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17futex: Handle futex_pi OWNER_DIED take over correctlyThomas Gleixner
commit 59fa6245192159ab5e1e17b8e31f15afa9cff4bf upstream. Siddhesh analyzed a failure in the take over of pi futexes in case the owner died and provided a workaround. See: http://sourceware.org/bugzilla/show_bug.cgi?id=14076 The detailed problem analysis shows: Futex F is initialized with PTHREAD_PRIO_INHERIT and PTHREAD_MUTEX_ROBUST_NP attributes. T1 lock_futex_pi(F); T2 lock_futex_pi(F); --> T2 blocks on the futex and creates pi_state which is associated to T1. T1 exits --> exit_robust_list() runs --> Futex F userspace value TID field is set to 0 and FUTEX_OWNER_DIED bit is set. T3 lock_futex_pi(F); --> Succeeds due to the check for F's userspace TID field == 0 --> Claims ownership of the futex and sets its own TID into the userspace TID field of futex F --> returns to user space T1 --> exit_pi_state_list() --> Transfers pi_state to waiter T2 and wakes T2 via rt_mutex_unlock(&pi_state->mutex) T2 --> acquires pi_state->mutex and gains real ownership of the pi_state --> Claims ownership of the futex and sets its own TID into the userspace TID field of futex F --> returns to user space T3 --> observes inconsistent state This problem is independent of UP/SMP, preemptible/non preemptible kernels, or process shared vs. private. The only difference is that certain configurations are more likely to expose it. So as Siddhesh correctly analyzed the following check in futex_lock_pi_atomic() is the culprit: if (unlikely(ownerdied || !(curval & FUTEX_TID_MASK))) { We check the userspace value for a TID value of 0 and take over the futex unconditionally if that's true. AFAICT this check is there as it is correct for a different corner case of futexes: the WAITERS bit became stale. Now the proposed change - if (unlikely(ownerdied || !(curval & FUTEX_TID_MASK))) { + if (unlikely(ownerdied || + !(curval & (FUTEX_TID_MASK | FUTEX_WAITERS)))) { solves the problem, but it's not obvious why and it wreckages the "stale WAITERS bit" case. What happens is, that due to the WAITERS bit being set (T2 is blocked on that futex) it enforces T3 to go through lookup_pi_state(), which in the above case returns an existing pi_state and therefor forces T3 to legitimately fight with T2 over the ownership of the pi_state (via pi_state->mutex). Probelm solved! Though that does not work for the "WAITERS bit is stale" problem because if lookup_pi_state() does not find existing pi_state it returns -ERSCH (due to TID == 0) which causes futex_lock_pi() to return -ESRCH to user space because the OWNER_DIED bit is not set. Now there is a different solution to that problem. Do not look at the user space value at all and enforce a lookup of possibly available pi_state. If pi_state can be found, then the new incoming locker T3 blocks on that pi_state and legitimately races with T2 to acquire the rt_mutex and the pi_state and therefor the proper ownership of the user space futex. lookup_pi_state() has the correct order of checks. It first tries to find a pi_state associated with the user space futex and only if that fails it checks for futex TID value = 0. If no pi_state is available nothing can create new state at that point because this happens with the hash bucket lock held. So the above scenario changes to: T1 lock_futex_pi(F); T2 lock_futex_pi(F); --> T2 blocks on the futex and creates pi_state which is associated to T1. T1 exits --> exit_robust_list() runs --> Futex F userspace value TID field is set to 0 and FUTEX_OWNER_DIED bit is set. T3 lock_futex_pi(F); --> Finds pi_state and blocks on pi_state->rt_mutex T1 --> exit_pi_state_list() --> Transfers pi_state to waiter T2 and wakes it via rt_mutex_unlock(&pi_state->mutex) T2 --> acquires pi_state->mutex and gains ownership of the pi_state --> Claims ownership of the futex and sets its own TID into the userspace TID field of futex F --> returns to user space This covers all gazillion points on which T3 might come in between T1's exit_robust_list() clearing the TID field and T2 fixing it up. It also solves the "WAITERS bit stale" problem by forcing the take over. Another benefit of changing the code this way is that it makes it less dependent on untrusted user space values and therefor minimizes the possible wreckage which might be inflicted. As usual after staring for too long at the futex code my brain hurts so much that I really want to ditch that whole optimization of avoiding the syscall for the non contended case for PI futexes and rip out the maze of corner case handling code. Unfortunately we can't as user space relies on that existing behaviour, but at least thinking about it helps me to preserve my mental sanity. Maybe we should nevertheless :) Reported-and-tested-by: Siddhesh Poyarekar <siddhesh.poyarekar@gmail.com> Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1210232138540.2756@ionos Acked-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17ipv6: send unsolicited neighbour advertisements to all-nodesHannes Frederic Sowa
[ Upstream commit 60713a0ca7fd6651b951cc1b4dbd528d1fc0281b ] As documented in RFC4861 (Neighbor Discovery for IP version 6) 7.2.6., unsolicited neighbour advertisements should be sent to the all-nodes multicast address. Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17af-packet: fix oops when socket is not presentEric Leblond
[ Upstream commit a3d744e995d2b936c500585ae39d99ee251c89b4 ] Due to a NULL dereference, the following patch is causing oops in normal trafic condition: commit c0de08d04215031d68fa13af36f347a6cfa252ca Author: Eric Leblond <eric@regit.org> Date:   Thu Aug 16 22:02:58 2012 +0000     af_packet: don't emit packet on orig fanout group This buggy patch was a feature fix and has reached most stable branches. When skb->sk is NULL and when packet fanout is used, there is a crash in match_fanout_group where skb->sk is accessed. This patch fixes the issue by returning false as soon as the socket is NULL: this correspond to the wanted behavior because the kernel as to resend the skb to all the listening socket in this case. Signed-off-by: Eric Leblond <eric@regit.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17net: inet_diag -- Return error code if protocol handler is missedCyrill Gorcunov
[ Upstream commit cacb6ba0f36ab14a507f4ee7697e8332899015d2 ] We've observed that in case if UDP diag module is not supported in kernel the netlink returns NLMSG_DONE without notifying a caller that handler is missed. This patch makes __inet_diag_dump to return error code instead. So as example it become possible to detect such situation and handle it gracefully on userspace level. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> CC: David Miller <davem@davemloft.net> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: Pavel Emelyanov <xemul@parallels.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17tcp-repair: Handle zero-length data put in rcv queuePavel Emelyanov
[ Upstream commit c454e6111d1ef4268fe98e87087216e51c2718c3 ] When sending data into a tcp socket in repair state we should check for the amount of data being 0 explicitly. Otherwise we'll have an skb with seq == end_seq in rcv queue, but tcp doesn't expect this to happen (in particular a warn_on in tcp_recvmsg shoots). Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Reported-by: Giorgos Mavrikas <gmavrikas@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17l2tp: fix oops in l2tp_eth_create() error pathTom Parkin
[ Upstream commit 789336360e0a2aeb9750c16ab704a02cbe035e9e ] When creating an L2TPv3 Ethernet session, if register_netdev() should fail for any reason (for example, automatic naming for "l2tpeth%d" interfaces hits the 32k-interface limit), the netdev is freed in the error path. However, the l2tp_eth_sess structure's dev pointer is left uncleared, and this results in l2tp_eth_delete() then attempting to unregister the same netdev later in the session teardown. This results in an oops. To avoid this, clear the session dev pointer in the error path. Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17drivers/net/ethernet/nxp/lpc_eth.c: Call mdiobus_unregister before mdiobus_freePeter Senna Tschudin
[ Upstream commit 57c10b61c84bfed68b1b317d6f507a392724b9c4 ] Based on commit b27393aecf66199f5ddad37c302d3e0cfadbe6c0 Calling mdiobus_free without calling mdiobus_unregister causes BUG_ON(). This patch fixes the issue. The semantic patch that found this issue(http://coccinelle.lip6.fr/): // <smpl> @@ expression E; @@ ... when != mdiobus_unregister(E); + mdiobus_unregister(E); mdiobus_free(E); // </smpl> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Tested-by: Roland Stigge <stigge@antcom.de> Tested-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17net: fix divide by zero in tcp algorithm illinoisJesper Dangaard Brouer
[ Upstream commit 8f363b77ee4fbf7c3bbcf5ec2c5ca482d396d664 ] Reading TCP stats when using TCP Illinois congestion control algorithm can cause a divide by zero kernel oops. The division by zero occur in tcp_illinois_info() at: do_div(t, ca->cnt_rtt); where ca->cnt_rtt can become zero (when rtt_reset is called) Steps to Reproduce: 1. Register tcp_illinois: # sysctl -w net.ipv4.tcp_congestion_control=illinois 2. Monitor internal TCP information via command "ss -i" # watch -d ss -i 3. Establish new TCP conn to machine Either it fails at the initial conn, or else it needs to wait for a loss or a reset. This is only related to reading stats. The function avg_delay() also performs the same divide, but is guarded with a (ca->cnt_rtt > 0) at its calling point in update_params(). Thus, simply fix tcp_illinois_info(). Function tcp_illinois_info() / get_info() is called without socket lock. Thus, eliminate any race condition on ca->cnt_rtt by using a local stack variable. Simply reuse info.tcpv_rttcnt, as its already set to ca->cnt_rtt. Function avg_delay() is not affected by this race condition, as its called with the socket lock. Cc: Petr Matousek <pmatouse@redhat.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17net: usb: Fix memory leak on Tx data pathHemant Kumar
[ Upstream commit 39707c2a3ba5011038b363f84d37c8a98d2d9db1 ] Driver anchors the tx urbs and defers the urb submission if a transmit request comes when the interface is suspended. Anchoring urb increments the urb reference count. These deferred urbs are later accessed by calling usb_get_from_anchor() for submission during interface resume. usb_get_from_anchor() unanchors the urb but urb reference count remains same. This causes the urb reference count to remain non-zero after usb_free_urb() gets called and urb never gets freed. Hence call usb_put_urb() after anchoring the urb to properly balance the reference count for these deferred urbs. Also, unanchor these deferred urbs during disconnect, to free them up. Signed-off-by: Hemant Kumar <hemantk@codeaurora.org> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17ipv6: Set default hoplimit as zero.Li RongQing
[ Upstream commit 14edd87dc67311556f1254a8f29cf4dd6cb5b7d1 ] Commit a02e4b7dae4551(Demark default hoplimit as zero) only changes the hoplimit checking condition and default value in ip6_dst_hoplimit, not zeros all hoplimit default value. Keep the zeroing ip6_template_metrics[RTAX_HOPLIMIT - 1] to force it as const, cause as a37e6e344910(net: force dst_default_metrics to const section) Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17net: fix secpath kmemleakEric Dumazet
[ Upstream commit 3d861f661006606bf159fd6bd973e83dbf21d0f9 ] Mike Kazantsev found 3.5 kernels and beyond were leaking memory, and tracked the faulty commit to a1c7fff7e18f59e ("net: netdev_alloc_skb() use build_skb()") While this commit seems fine, it uncovered a bug introduced in commit bad43ca8325 ("net: introduce skb_try_coalesce()), in function kfree_skb_partial()"): If head is stolen, we free the sk_buff, without removing references on secpath (skb->sp). So IPsec + IP defrag/reassembly (using skb coalescing), or TCP coalescing could leak secpath objects. Fix this bug by calling skb_release_head_state(skb) to properly release all possible references to linked objects. Reported-by: Mike Kazantsev <mk.fraggod@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Bisected-by: Mike Kazantsev <mk.fraggod@gmail.com> Tested-by: Mike Kazantsev <mk.fraggod@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17tcp: fix FIONREAD/SIOCINQEric Dumazet
[ Upstream commit a3374c42aa5f7237e87ff3b0622018636b0c847e ] tcp_ioctl() tries to take into account if tcp socket received a FIN to report correct number bytes in receive queue. But its flaky because if the application ate the last skb, we return 1 instead of 0. Correct way to detect that FIN was received is to test SOCK_DONE. Reported-by: Elliot Hughes <enh@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17netlink: use kfree_rcu() in netlink_release()Eric Dumazet
[ Upstream commit 6d772ac5578f711d1ce7b03535d1c95bffb21dff ] On some suspend/resume operations involving wimax device, we have noticed some intermittent memory corruptions in netlink code. Stéphane Marchesin tracked this corruption in netlink_update_listeners() and suggested a patch. It appears netlink_release() should use kfree_rcu() instead of kfree() for the listeners structure as it may be used by other cpus using RCU protection. netlink_release() must set to NULL the listeners pointer when it is about to be freed. Also have to protect netlink_update_listeners() and netlink_has_listeners() if listeners is NULL. Add a nl_deref_protected() lockdep helper to properly document which locks protects us. Reported-by: Jonathan Kliegman <kliegs@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Stéphane Marchesin <marcheu@google.com> Cc: Sam Leffler <sleffler@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17ipv4: Fix flushing of cached routing informationsSteffen Klassert
[ Upstream commit 13d82bf50dce632355fcccafa4fe44a9b5e706d8 ] Currently we can not flush cached pmtu/redirect informations via the ipv4_sysctl_rtcache_flush sysctl. We need to check the rt_genid of the old route and reset the nh exeption if the old route is expired when we bind a new route to a nh exeption. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17sctp: fix call to SCTP_CMD_PROCESS_SACK in sctp_cmd_interpreter()Zijie Pan
[ Upstream commit f6e80abeab928b7c47cc1fbf53df13b4398a2bec ] Bug introduced by commit edfee0339e681a784ebacec7e8c2dc97dc6d2839 (sctp: check src addr when processing SACK to update transport state) Signed-off-by: Zijie Pan <zijie.pan@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17ALSA: Avoid endless sleep after disconnectTakashi Iwai
commit 0914f7961babbf28aaa2f19b453951fb4841c03f upstream. When disconnect callback is called, each component should wake up sleepers and check card->shutdown flag for avoiding the endless sleep blocking the proper resource release. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17ALSA: Add a reference counter to card instanceTakashi Iwai
commit a0830dbd4e42b38aefdf3fb61ba5019a1a99ea85 upstream. For more strict protection for wild disconnections, a refcount is introduced to the card instance, and let it up/down when an object is referred via snd_lookup_*() in the open ops. The free-after-last-close check is also changed to check this refcount instead of the empty list, too. Reported-by: Matthieu CASTET <matthieu.castet@parrot.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17ALSA: usb-audio: Fix races at disconnection in mixer_quirks.cTakashi Iwai
commit 888ea7d5ac6815ba16b3b3a20f665a92c7af6724 upstream. Similar like the previous commit, cover with chip->shutdown_rwsem and chip->shutdown checks. Reported-by: Matthieu CASTET <matthieu.castet@parrot.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17ALSA: usb-audio: Use rwsem for disconnect protectionTakashi Iwai
commit 34f3c89fda4fba9fe689db22253ca8db2f5e6386 upstream. Replace mutex with rwsem for codec->shutdown protection so that concurrent accesses are allowed. Also add the protection to snd_usb_autosuspend() and snd_usb_autoresume(), too. Reported-by: Matthieu CASTET <matthieu.castet@parrot.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17ALSA: usb-audio: Fix races at disconnectionTakashi Iwai
commit 978520b75f0a1ce82b17e1e8186417250de6d545 upstream. Close some races at disconnection of a USB audio device by adding the chip->shutdown_mutex and chip->shutdown check at appropriate places. The spots to put bandaids are: - PCM prepare, hw_params and hw_free - where the usb device is accessed for communication or get speed, in mixer.c and others; the device speed is now cached in subs->speed instead of accessing to chip->dev The accesses in PCM open and close don't need the mutex protection because these are already handled in the core PCM disconnection code. The autosuspend/autoresume codes are still uncovered by this patch because of possible mutex deadlocks. They'll be covered by the upcoming change to rwsem. Also the mixer codes are untouched, too. These will be fixed in another patch, too. Reported-by: Matthieu CASTET <matthieu.castet@parrot.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17ALSA: PCM: Fix some races at disconnectionTakashi Iwai
commit 9b0573c07f278e9888c352aa9724035c75784ea0 upstream. Fix races at PCM disconnection: - while a PCM device is being opened or closed - while the PCM state is being changed without lock in prepare, hw_params, hw_free ops Reported-by: Matthieu CASTET <matthieu.castet@parrot.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17hwmon: (w83627ehf) Force initial bank selectionJean Delvare
commit 3300fb4f88688029fff8dfb9ec0734f6e4cba3e7 upstream. Don't assume bank 0 is selected at device probe time. This may not be the case. Force bank selection at first register access to guarantee that we read the right registers upon driver loading. Signed-off-by: Jean Delvare <khali@linux-fr.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17drm: set dev_mapping before calling drm_open_helperIlija Hadzic
commit fdb40a08ef7bc970899c3a1f471165f9c22763a1 upstream. Some drivers (specifically vmwgfx) look at dev_mapping in their open hook, so we have to set dev->dev_mapping earlier in the process. Reference: http://lists.freedesktop.org/archives/dri-devel/2012-October/029420.html Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Reported-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17drm: restore open_count if drm_setup failsIlija Hadzic
commit 0f1cb1bd94a9c967cd4ad3de51cfdabe61eb5dcc upstream. If drm_setup (called at first open) fails, the whole open call has failed, so we should not keep the open_count incremented. Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2025-04-11 19:43:26 +0000