aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-06-23leds: pca9532 - Indent using tabs, not spaces.Antonio Ospite
Indent using tabs, not spaces. Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Acked-by: Riku Voipio <riku.voipio@iki.fi> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-06-23leds: Remove an orphan Kconfig entryRichard Purdie
Remove an orphan Kconfig entry (LEDS_LP5521) Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-06-23leds: Further document parameters for blink_set()Mark Brown
The documentation for the parameters of blink_set() was a bit hard to find so put some where I'd expected to find it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-06-23leds: alix-leds2 fixed for Award BIOSTobias Mueller
Add initialisation of GPIO ports for compatibility with boards with Award BIOS (e.g. ALIX.3D3). Signed-off-by: Tobias Mueller <Tobias_Mueller@twam.info> Reviewed-by: Constantin Baranov <const@mimas.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-06-23leds: leds-gpio - fix a section mismatchZhenwen Xu
WARNING: drivers/leds/leds-gpio.o(.text+0x153): Section mismatch in reference from the function gpio_led_probe() to the function .devinit.text:create_gpio_led() The function gpio_led_probe() references the function __devinit create_gpio_led(). This is often because gpio_led_probe lacks a __devinit annotation or the annotation of create_gpio_led is wrong. Signed-off-by: Zhenwen Xu <helight.xu@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-06-23leds: add the sysfs interface into the leds-bd2802 driver for changing wave ↵Kim Kyuwon
pattern and led current. Allow the user application to change the wave pattern and led current by 'wave_pattern' and 'rgb_current' sysfs files. Signed-off-by: Kim Kyuwon <q1.kim@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-06-23leds: change the license informationKim Kyuwon
Change the license to 'GPL v2' Signed-off-by: Kim Kyuwon <q1.kim@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-06-23leds: fix led-bd2802 errors while resumingKim Kyuwon
LED_CORE_SUSPENDRESUME flag is not needed in the bd2802 driver, because all works for suspend/resume is done in bd2802_suspend and bd2802_suspend functions. And this patch allows bd2802 to be configured again when it resumes from suspend. Signed-off-by: Kim Kyuwon <q1.kim@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-06-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (27 commits) Blackfin: fix dma-mapping build errors Blackfin: hook up new perf_counter_open syscall Blackfin: drop BF535-specific text for exception 0x2A (unaligned instruction) Blackfin: fix early crash when booting on wrong cpu Blackfin: fix GPTMR0_CLOCKSOURCE dependency on BFIN_GPTIMERS Blackfin: drop unused ISP1760 port1_disable from board resources Blackfin: bf526-ezbrd: handle different SDRAM chips Blackfin: fix typo in TRAS define in mem_init.h header Blackfin: unify memory map headers Blackfin: stick the CPU name into boot image name Blackfin: update defconfigs Blackfin: decouple unrelated cache settings to get exact behavior Blackfin: update I-pipe patch level Blackfin: remove obsolete mcount support from I-pipe code Blackfin: allow CONFIG_TICKSOURCE_GPTMR0 with interrupt pipeline Blackfin: convert interrupt pipeline to irqflags Blackfin: allow people to select BF51x-0.1 silicon rev Blackfin: bf526-ezbrd: set SPI flash resources to SST device Blackfin: fix accidental reset in some boot modes Blackfin: abstract irq14 lowering in do_irq ...
2009-06-22Merge git://git.infradead.org/~dwmw2/iommu-2.6.31Linus Torvalds
* git://git.infradead.org/~dwmw2/iommu-2.6.31: intel-iommu: Fix one last ia64 build problem in Pass Through Support VT-d: support the device IOTLB VT-d: cleanup iommu_flush_iotlb_psi and flush_unmaps VT-d: add device IOTLB invalidation support VT-d: parse ATSR in DMA Remapping Reporting Structure PCI: handle Virtual Function ATS enabling PCI: support the ATS capability intel-iommu: dmar_set_interrupt return error value intel-iommu: Tidy up iommu->gcmd handling intel-iommu: Fix tiny theoretical race in write-buffer flush. intel-iommu: Clean up handling of "caching mode" vs. IOTLB flushing. intel-iommu: Clean up handling of "caching mode" vs. context flushing. VT-d: fix invalid domain id for KVM context flush Fix !CONFIG_DMAR build failure introduced by Intel IOMMU Pass Through Support Intel IOMMU Pass Through Support Fix up trivial conflicts in drivers/pci/{intel-iommu.c,intr_remapping.c}
2009-06-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: new stack is no longer experimental firewire: net: better FIFO address range check and rcodes firewire: net: fix card driver reloading firewire: core: fix iso context shutdown on card removal firewire: core: fix DMA unmapping in iso buffer removal firewire: net: adjust net_device ops firewire: net: remove unused code firewire: net: allow for unordered unit discovery firewire: net: style changes firewire: net: add Kconfig item, rename driver firewire: add IPv4 support
2009-06-22NFS: Correct the NFS mount path when following a referralTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22NFS: Fix nfs_path() to always return a '/' at the beginning of the pathTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22NFSv4: Replace nfs4_path_walk() with VFS path lookup in a private namespaceTrond Myklebust
As noted in the previous patch, the NFSv4 client mount code currently has several limitations. If the mount path contains symlinks, or referrals, or even if it just contains a '..', then the client code in nfs4_path_walk() will fail with an error. This patch replaces the nfs4_path_walk()-based lookup with a helper function that sets up a private namespace to represent the namespace on the server, then uses the ordinary VFS and NFS path lookup code to walk down the mount path in that namespace. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22VFS: Add VFS helper functions for setting up private namespacesTrond Myklebust
The purpose of this patch is to improve the remote mount path lookup support for distributed filesystems such as the NFSv4 client. When given a mount command of the form "mount server:/foo/bar /mnt", the NFSv4 client is required to look up the filehandle for "server:/", and then look up each component of the remote mount path "foo/bar" in order to find the directory that is actually going to be mounted on /mnt. Following that remote mount path may involve following symlinks, crossing server-side mount points and even following referrals to filesystem volumes on other servers. Since the standard VFS path lookup code already supports walking paths that contain all these features (using in-kernel automounts for following referrals) we would like to be able to reuse that rather than duplicate the full path traversal functionality in the NFSv4 client code. This patch therefore defines a VFS helper function create_mnt_ns(), that sets up a temporary filesystem namespace and attaches a root filesystem to it. It exports the create_mnt_ns() and put_mnt_ns() function for use by filesystem modules. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22VFS: Uninline the function put_mnt_ns()Trond Myklebust
In order to allow modules to use it without having to export vfsmount_lock. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22mm/init: cpu_hotplug_init() must be initialized before SLABLinus Torvalds
SLAB uses get/put_online_cpus() which use a mutex which is itself only initialized when cpu_hotplug_init() is called. Currently we hang suring boot in SLAB due to doing that too late. Reported by James Bottomley and Sachin Sant (and possibly others). Debugged by Benjamin Herrenschmidt. This just removes the dynamic initialization of the data structures, and replaces it with a static one, avoiding this dependency entirely, and removing one unnecessary special initcall. Tested-by: Sachin Sant <sachinp@in.ibm.com> Tested-by: James Bottomley <James.Bottomley@HansenPartnership.com> Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22Blackfin: fix dma-mapping build errorsFUJITA Tomonori
The recent deprecation of dma_sync_{sg,single} ironically broke Blackfin systems. This is because we don't define dma_sync_sg_for_cpu at all, so until the DMA asm-generic conversion/cleanup is done after the next release, simply stub out the dma_sync_sg_for_{cpu,device} functions. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Blackfin: hook up new perf_counter_open syscallMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Blackfin: drop BF535-specific text for exception 0x2A (unaligned instruction)Yi Li
We don't support the BF535 at all, and the exception 0x2A text specific to it is pretty verbose and confusing (since the behavior is simply odd), so punt it to keep the noise down. Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Blackfin: fix early crash when booting on wrong cpuRobin Getz
Make sure we process the kernel command line before poking the hardware, so that we can process early printk. This helps ensure that if you boot a kernel configured for a different processor, something will be left in the log buffer. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Blackfin: fix GPTMR0_CLOCKSOURCE dependency on BFIN_GPTIMERSMike Frysinger
The GPTMR0_CLOCKSOURCE Kconfig option requires the gptimers framework, so make sure it is selected when this option is enabled. Reported-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Blackfin: drop unused ISP1760 port1_disable from board resourcesMike Frysinger
The port1 disable stuff was dropped from the USB ISP1760, so update the Blackfin boards accordingly. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Blackfin: bf526-ezbrd: handle different SDRAM chipsGraf Yang
The BF526-EZBRD changed SDRAM chips between board revisions, so create a timing table that can accommodate both. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Blackfin: fix typo in TRAS define in mem_init.h headerGraf Yang
We defined SDRAM_tRAS to TRAS_4, but then wrongly defined SDRAM_tRAS_num to 3. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Blackfin: unify memory map headersMike Frysinger
Many aspects of the Blackfin memory map is exactly the same across all variants. Rather than copy and paste all of these duplicated values in each header, unify all of these into the common Blackfin memory map header file. In the process, push down BF561 SMP specific stuff to the BF561 specific header to keep the noise down. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Blackfin: stick the CPU name into boot image nameRobin Getz
Rather than use "Linux" in the boot image name (as this is redundant -- the image type is already set to "linux"), use the CPU name. This makes it fairly obvious when a wrong image is accidentally booted. Otherwise there is no kernel output and you waste time scratching your head wondering wtf just happened. Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Blackfin: update defconfigsMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Blackfin: decouple unrelated cache settings to get exact behaviorJie Zhang
The current cache options don't really represent the hardware features. They end up setting different aspects of the hardware so that the end result is to turn on/off the cache. Unfortunately, when we hit cache problems with the hardware, it's difficult to test different settings to root cause the problem. The current settings also don't cleanly allow for different caching behaviors with different regions of memory. So split the configure options such that they properly reflect the settings that are applied to the hardware. Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Blackfin: update I-pipe patch levelPhilippe Gerum
Signed-off-by: Philippe Gerum <rpm@xenomai.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Blackfin: remove obsolete mcount support from I-pipe codePhilippe Gerum
Signed-off-by: Philippe Gerum <rpm@xenomai.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Blackfin: allow CONFIG_TICKSOURCE_GPTMR0 with interrupt pipelinePhilippe Gerum
Signed-off-by: Philippe Gerum <rpm@xenomai.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Blackfin: convert interrupt pipeline to irqflagsPhilippe Gerum
Signed-off-by: Philippe Gerum <rpm@xenomai.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Blackfin: allow people to select BF51x-0.1 silicon revMike Frysinger
Now that 0.1 of the BF51x is coming out, allow people to build for it. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Blackfin: bf526-ezbrd: set SPI flash resources to SST deviceGraf Yang
The BF526-EZBRD has a SST SPI flash on it, not a ST Micro. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Blackfin: fix accidental reset in some boot modesSonic Zhang
We read the SWRST (Software Reset) register to get at the last reset state, and then we may configure the DOUBLE_FAULT bit to control behavior when a double fault occurs. But if the lower bits of the register is already set (like UART boot mode on a BF54x), we inadvertently make the system reset by writing to the SYSTEM_RESET field at the same time. So make sure the lower 4 bits are always cleared. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Blackfin: abstract irq14 lowering in do_irqMike Frysinger
Split out the optional IRQ14 lowering code to further simplify the asm_do_IRQ() function and keep the ifdef nest under control. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Blackfin: simplify irq stack overflow checkingMike Frysinger
Take a page from x86 and abstract the stack checking out of the asm_do_IRQ() function so that the result is easier to digest. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Blackfin: only build show_interrupts() when procfs is enabledMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Blackfin: redo handling of bad irqsMike Frysinger
With the common IRQ code initializing much more of the irq_desc state, we can't blindly initialize it ourselves to the local bad_irq state. If we do, we end up wrongly clobbering many fields. So punt most of the bad irq code as the common layers will handle the default state, and simply call handle_bad_irq() directly when the IRQ we are processing is invalid. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Blackfin: update anomaly listsMike Frysinger
Update anomaly headers to match latest released anomaly sheets. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Blackfin: bf533-ezkit: add resources for FISP devicesMike Frysinger
The BF533-EZKIT has two Flash In-System Programming devices hooked up to the async memory bus, so add resources for the primary flashes and the SRAMs on the devices. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Blackfin: bf518f-ezbrd: update DSA resourcesMike Frysinger
The common DSA code changed structure layout, so update the BF518F-EZBRD resources accordingly. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Blackfin: unify memory region checks between kgdb and trapsMike Frysinger
The kgdb (in multiple places) and traps code developed pretty much identical checks for how to access different regions of the Blackfin memory map, but each wasn't 100%, so unify them to avoid duplication, bitrot, and bugs with edge cases. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: (63 commits) mtd: OneNAND: Allow setting of boundary information when built as module jffs2: leaking jffs2_summary in function jffs2_scan_medium mtd: nand: Fix memory leak on txx9ndfmc probe failure. mtd: orion_nand: use burst reads with double word accesses mtd/nand: s3c6400 support for s3c2410 driver [MTD] [NAND] S3C2410: Use DIV_ROUND_UP [MTD] [NAND] S3C2410: Deal with unaligned lengths in S3C2440 buffer read/write [MTD] [NAND] S3C2410: Allow the machine code to get the BBT table from NAND [MTD] [NAND] S3C2410: Added a kerneldoc for s3c2410_nand_set mtd: physmap_of: Add multiple regions and concatenation support mtd: nand: max_retries off by one in mxc_nand mtd: nand: s3c2410_nand_setrate(): use correct macros for 2412/2440 mtd: onenand: add bbt_wait & unlock_all as replaceable for some platform mtd: Flex-OneNAND support mtd: nand: add OMAP2/OMAP3 NAND driver mtd: maps: Blackfin async: fix memory leaks in probe/remove funcs mtd: uclinux: mark local stuff static mtd: uclinux: do not allow to be built as a module mtd: uclinux: allow systems to override map addr/size mtd: blackfin NFC: fix hang when using NAND on BF527-EZKITs ...
2009-06-22Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (49 commits) [ARM] idle: clean up pm_idle calling, obey hlt_counter [ARM] S3C: Fix gpio-config off-by-one bug [ARM] S3C64XX: add to_irq() support for EINT() GPIO [ARM] S3C64XX: clock.c: fix typo in usb-host clock ctrlbit [ARM] S3C64XX: fix HCLK gate defines [ARM] Update mach-types [ARM] wire up rt_tgsigqueueinfo and perf_counter_open OMAP2 clock/powerdomain: off by 1 error in loop timeout comparisons OMAP3 SDRC: set FIXEDDELAY when disabling SDRC DLL OMAP3: Add support for DPLL3 divisor values higher than 2 OMAP3 SRAM: convert SRAM code to use macros rather than magic numbers OMAP3 SRAM: add more comments on the SRAM code OMAP3 clock/SDRC: program SDRC_MR register during SDRC clock change OMAP3 clock: add a short delay when lowering CORE clk rate OMAP3 clock: initialize SDRC timings at kernel start OMAP3 clock: remove wait for DPLL3 M2 clock to stabilize [ARM] Add old Feroceon support to compressed/head.S [ARM] 5559/1: Limit the stack unwinding caused by a kthread exit [ARM] 5558/1: Add extra checks to ARM unwinder to avoid tracing corrupt stacks [ARM] 5557/1: Discard some ARM.ex*.*exit.text sections when !HOTPLUG or !HOTPLUG_CPU ...
2009-06-22[ARM] idle: clean up pm_idle calling, obey hlt_counterRussell King
pm_idle is used by infrastructure (eg, cpuidle) which expects architectures to call it in a certain way. Arrange for ARM to follow x86's lead on this and call pm_idle() with interrupts already disabled. However, we expect pm_idle() to enable interrupts before it returns. Also, OMAP wants to be able to disable hlt-ing, so allow hlt_counter to prevent all calls to pm_idle. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-22MN10300: Fix the vmlinux ldscriptDavid Howells
Fix the MN10300 vmlinux ldscript. It needs to use various macros from asm-generic/vmlinux.lds.h to correctly include all that it needs to. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22LDSCRIPT: Name INIT_RAM_FS consistentlyDavid Howells
In asm-generic/vmlinux.lds.h, name INIT_RAM_FS consistently, no matter the setting of CONFIG_BLK_DEV_INITRD. This corrects: commit ef53dae8658cf0e93d380983824a661067948d87 Author: Sam Ravnborg <sam@ravnborg.org> Date: Sun Jun 7 20:46:37 2009 +0200 Subject: Improve vmlinux.lds.h support for arch specific linker scripts Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22Merge branch 'for-2.6.31' of git://fieldses.org/git/linux-nfsdLinus Torvalds
* 'for-2.6.31' of git://fieldses.org/git/linux-nfsd: (60 commits) SUNRPC: Fix the TCP server's send buffer accounting nfsd41: Backchannel: minorversion support for the back channel nfsd41: Backchannel: cleanup nfs4.0 callback encode routines nfsd41: Remove ip address collision detection case nfsd: optimise the starting of zero threads when none are running. nfsd: don't take nfsd_mutex twice when setting number of threads. nfsd41: sanity check client drc maxreqs nfsd41: move channel attributes from nfsd4_session to a nfsd4_channel_attr struct NFS: kill off complicated macro 'PROC' sunrpc: potential memory leak in function rdma_read_xdr nfsd: minor nfsd_vfs_write cleanup nfsd: Pull write-gathering code out of nfsd_vfs_write nfsd: track last inode only in use_wgather case sunrpc: align cache_clean work's timer nfsd: Use write gathering only with NFSv2 NFSv4: kill off complicated macro 'PROC' NFSv4: do exact check about attribute specified knfsd: remove unreported filehandle stats counters knfsd: fix reply cache memory corruption knfsd: reply cache cleanups ...