aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-01-17SUNRPC: Ensure that we free the rpc_task after cleanups are doneTrond Myklebust
commit c6567ed1402c55e19b012e66a8398baec2a726f3 upstream. This patch ensures that we free the rpc_task after the cleanup callbacks are done in order to avoid a deadlock problem that can be triggered if the callback needs to wait for another workqueue item to complete. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Weston Andros Adamson <dros@netapp.com> Cc: Tejun Heo <tj@kernel.org> Cc: Bruce Fields <bfields@fieldses.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17SUNRPC: continue run over clients list on PipeFS event instead of breakStanislav Kinsbursky
commit cd6c5968582a273561464fe6b1e8cc8214be02df upstream. There are SUNRPC clients, which program doesn't have pipe_dir_name. These clients can be skipped on PipeFS events, because nothing have to be created or destroyed. But instead of breaking in case of such a client was found, search for suitable client over clients list have to be continued. Otherwise some clients could not be covered by PipeFS event handler. Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17mtd: nand: gpmi: reset BCH earlier, too, to avoid NAND startup problemsWolfram Sang
commit 6f2a6a52560ad8d85710aabd92b7a3239b3a6b07 upstream. It could happen (1 out of 100 times) that NAND did not start up correctly after warm rebooting, so the kernel could not find the UBI or DMA timed out due to a stalled BCH. When resetting BCH together with GPMI, the issue could not be observed anymore (after 10000+ reboots). We probably need the consistent state already before sending any command to NAND, even when no ECC is needed. I chose to keep the extra reset for BCH when changing the flash layout to be on the safe side. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17mtd cs553x_nand: Initialise ecc.strength before nand_scan()Nathan Williams
commit d1f3b65d2d6fdb4bf0edd4b67e86e191af48daee upstream. Loading cs553x_nand with Hynix H27U1G8F2BTR NAND flash causes this bug: kernel BUG at drivers/mtd/nand/nand_base.c:3345! invalid opcode: 0000 [#1] Modules linked in: cs553x_nand(+) vfat fat usb_storage ehci_hcd usbcore usb_comr Pid: 436, comm: modprobe Not tainted 3.6.7 #1 EIP: 0060:[<c118d205>] EFLAGS: 00010296 CPU: 0 EIP is at nand_scan_tail+0x64c/0x69c EAX: 00000034 EBX: cea6ed98 ECX: 00000000 EDX: 00000000 ESI: cea6ec00 EDI: cea6ec00 EBP: 20000000 ESP: cdd17e48 DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 CR0: 8005003b CR2: 0804e119 CR3: 0d850000 CR4: 00000090 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 Process modprobe (pid: 436, ti=cdd16000 task=cdd1c320 task.ti=cdd16000) Stack: c12e962c c118f7ef 00000003 cea6ed98 d014b25c 20000000 fffff007 00000001 00000000 cdd53b00 d014b000 c1001021 cdd53b00 d01493c0 cdd53b00 cdd53b00 d01493c0 c1047f83 d014b4a0 00000000 cdd17f9c ce4be454 cdd17f48 cdd1c320 Call Trace: [<c118f7ef>] ? nand_scan+0x1b/0x4d [<d014b25c>] ? init_module+0x25c/0x2de [cs553x_nand] [<d014b000>] ? 0xd014afff [<c1001021>] ? do_one_initcall+0x21/0x111 [<c1047f83>] ? sys_init_module+0xe4/0x1261 [<c1031207>] ? task_work_run+0x36/0x43 [<c1265ced>] ? syscall_call+0x7/0xb Code: fa ff ff c7 86 d8 00 00 00 01 00 00 00 e9 5f fc ff ff 68 f8 26 2e c1 e8 a7 EIP: [<c118d205>] nand_scan_tail+0x64c/0x69c SS:ESP 0068:cdd17e48 Initialising ecc.strength before the call to nand_scan() fixes this. Signed-off-by: Nathan Williams <nathan@traverse.com.au> Acked-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17ext4: fix possible use after free with metadata csumTheodore Ts'o
commit aeb1e5d69a5be592e86a926be73efb38c55af404 upstream. Commit fa77dcfafeaa introduces block bitmap checksum calculation into ext4_new_inode() in the case that block group was uninitialized. However we brelse() the bitmap buffer before we attempt to checksum it so we have no guarantee that the buffer is still there. Fix this by releasing the buffer after the possible checksum computation. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Acked-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17ext4: fix memory leak in ext4_xattr_set_acl()'s error pathEugene Shatokhin
commit 24ec19b0ae83a385ad9c55520716da671274b96c upstream. In ext4_xattr_set_acl(), if ext4_journal_start() returns an error, posix_acl_release() will not be called for 'acl' which may result in a memory leak. This patch fixes that. Reviewed-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Eugene Shatokhin <eugene.shatokhin@rosalab.ru> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17mfd: Only unregister platform devices allocated by the mfd coreCharles Keepax
commit b9fbb62eb61452d728c39b2e5020739c575aac53 upstream. mfd_remove_devices would iterate over all devices sharing a parent with an mfd device regardless of whether they were allocated by the mfd core or not. This especially caused problems when the device structure was not contained within a platform_device, because to_platform_device is used on each device pointer. This patch defines a device_type for mfd devices and checks this is present from mfd_remove_devices_fn before processing the device. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Tested-by: Peter Tyser <ptyser@xes-inc.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17mfd: wm8994: Add support for WM1811 rev EMark Brown
commit fee546ce8cfd9dea1f53175f627e17ef5ff05df4 upstream. This is supported identically to the previous revisions. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17target/tcm_fc: fix the lockdep warning due to inconsistent lock stateYi Zou
commit 9f4ad44b264f8bb61ffdd607148215566568430d upstream. The lockdep warning below is in theory correct but it will be in really weird rare situation that ends up that deadlock since the tcm fc session is hashed based the rport id. Nonetheless, the complaining below is about rcu callback that does the transport_deregister_session() is happening in softirq, where transport_register_session() that happens earlier is not. This triggers the lockdep warning below. So, just fix this to make lockdep happy by disabling the soft irq before calling transport_register_session() in ft_prli. BTW, this was found in FCoE VN2VN over two VMs, couple of create and destroy would get this triggered. v1: was enforcing register to be in softirq context which was not righ. See, http://www.spinics.net/lists/target-devel/msg03614.html v2: following comments from Roland&Nick (thanks), it seems we don't have to do transport_deregister_session() in rcu callback, so move it into ft_sess_free() but still do kfree() of the corresponding ft_sess struct in rcu callback to make sure the ft_sess is not freed till the rcu callback. ... [ 1328.370592] scsi2 : FCoE Driver [ 1328.383429] fcoe: No FDMI support. [ 1328.384509] host2: libfc: Link up on port (000000) [ 1328.934229] host2: Assigned Port ID 00a292 [ 1357.232132] host2: rport 00a393: Remove port [ 1357.232568] host2: rport 00a393: Port sending LOGO from Ready state [ 1357.233692] host2: rport 00a393: Delete port [ 1357.234472] host2: rport 00a393: work event 3 [ 1357.234969] host2: rport 00a393: callback ev 3 [ 1357.235979] host2: rport 00a393: Received a LOGO response closed [ 1357.236706] host2: rport 00a393: work delete [ 1357.237481] [ 1357.237631] ================================= [ 1357.238064] [ INFO: inconsistent lock state ] [ 1357.238450] 3.7.0-rc7-yikvm+ #3 Tainted: G O [ 1357.238450] --------------------------------- [ 1357.238450] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 1357.238450] ksoftirqd/0/3 [HC0[0]:SC1[1]:HE0:SE0] takes: [ 1357.238450] (&(&se_tpg->session_lock)->rlock){+.?...}, at: [<ffffffffa01eacd4>] transport_deregister_session+0x41/0x148 [target_core_mod] [ 1357.238450] {SOFTIRQ-ON-W} state was registered at: [ 1357.238450] [<ffffffff810834f5>] mark_held_locks+0x6d/0x95 [ 1357.238450] [<ffffffff8108364a>] trace_hardirqs_on_caller+0x12d/0x197 [ 1357.238450] [<ffffffff810836c1>] trace_hardirqs_on+0xd/0xf [ 1357.238450] [<ffffffff8149caba>] _raw_spin_unlock_irq+0x2d/0x45 [ 1357.238450] [<ffffffffa01e8d10>] __transport_register_session+0xb8/0x122 [target_core_mod] [ 1357.238450] [<ffffffffa01e8dbe>] transport_register_session+0x44/0x5a [target_core_mod] [ 1357.238450] [<ffffffffa018e32c>] ft_prli+0x1e3/0x275 [tcm_fc] [ 1357.238450] [<ffffffffa0160e8d>] fc_rport_recv_req+0x95e/0xdc5 [libfc] [ 1357.238450] [<ffffffffa015be88>] fc_lport_recv_els_req+0xc4/0xd5 [libfc] [ 1357.238450] [<ffffffffa015c778>] fc_lport_recv_req+0x12f/0x18f [libfc] [ 1357.238450] [<ffffffffa015a6d7>] fc_exch_recv+0x8ba/0x981 [libfc] [ 1357.238450] [<ffffffffa0176d7a>] fcoe_percpu_receive_thread+0x47a/0x4e2 [fcoe] [ 1357.238450] [<ffffffff810549f1>] kthread+0xb1/0xb9 [ 1357.238450] [<ffffffff814a40ec>] ret_from_fork+0x7c/0xb0 [ 1357.238450] irq event stamp: 275411 [ 1357.238450] hardirqs last enabled at (275410): [<ffffffff810bb6a0>] rcu_process_callbacks+0x229/0x42a [ 1357.238450] hardirqs last disabled at (275411): [<ffffffff8149c2f7>] _raw_spin_lock_irqsave+0x22/0x8e [ 1357.238450] softirqs last enabled at (275394): [<ffffffff8103d669>] __do_softirq+0x246/0x26f [ 1357.238450] softirqs last disabled at (275399): [<ffffffff8103d6bb>] run_ksoftirqd+0x29/0x62 [ 1357.238450] [ 1357.238450] other info that might help us debug this: [ 1357.238450] Possible unsafe locking scenario: [ 1357.238450] [ 1357.238450] CPU0 [ 1357.238450] ---- [ 1357.238450] lock(&(&se_tpg->session_lock)->rlock); [ 1357.238450] <Interrupt> [ 1357.238450] lock(&(&se_tpg->session_lock)->rlock); [ 1357.238450] [ 1357.238450] *** DEADLOCK *** [ 1357.238450] [ 1357.238450] no locks held by ksoftirqd/0/3. [ 1357.238450] [ 1357.238450] stack backtrace: [ 1357.238450] Pid: 3, comm: ksoftirqd/0 Tainted: G O 3.7.0-rc7-yikvm+ #3 [ 1357.238450] Call Trace: [ 1357.238450] [<ffffffff8149399a>] print_usage_bug+0x1f5/0x206 [ 1357.238450] [<ffffffff8100da59>] ? save_stack_trace+0x2c/0x49 [ 1357.238450] [<ffffffff81082aae>] ? print_irq_inversion_bug.part.14+0x1ae/0x1ae [ 1357.238450] [<ffffffff81083336>] mark_lock+0x106/0x258 [ 1357.238450] [<ffffffff81084e34>] __lock_acquire+0x2e7/0xe53 [ 1357.238450] [<ffffffff8102903d>] ? pvclock_clocksource_read+0x48/0xb4 [ 1357.238450] [<ffffffff810ba6a3>] ? rcu_process_gp_end+0xc0/0xc9 [ 1357.238450] [<ffffffffa01eacd4>] ? transport_deregister_session+0x41/0x148 [target_core_mod] [ 1357.238450] [<ffffffff81085ef1>] lock_acquire+0x119/0x143 [ 1357.238450] [<ffffffffa01eacd4>] ? transport_deregister_session+0x41/0x148 [target_core_mod] [ 1357.238450] [<ffffffff8149c329>] _raw_spin_lock_irqsave+0x54/0x8e [ 1357.238450] [<ffffffffa01eacd4>] ? transport_deregister_session+0x41/0x148 [target_core_mod] [ 1357.238450] [<ffffffffa01eacd4>] transport_deregister_session+0x41/0x148 [target_core_mod] [ 1357.238450] [<ffffffff810bb6a0>] ? rcu_process_callbacks+0x229/0x42a [ 1357.238450] [<ffffffffa018ddc5>] ft_sess_rcu_free+0x17/0x24 [tcm_fc] [ 1357.238450] [<ffffffffa018ddae>] ? ft_sess_free+0x1b/0x1b [tcm_fc] [ 1357.238450] [<ffffffff810bb6d7>] rcu_process_callbacks+0x260/0x42a [ 1357.238450] [<ffffffff8103d55d>] __do_softirq+0x13a/0x26f [ 1357.238450] [<ffffffff8149b34e>] ? __schedule+0x65f/0x68e [ 1357.238450] [<ffffffff8103d6bb>] run_ksoftirqd+0x29/0x62 [ 1357.238450] [<ffffffff8105c83c>] smpboot_thread_fn+0x1a5/0x1aa [ 1357.238450] [<ffffffff8105c697>] ? smpboot_unregister_percpu_thread+0x47/0x47 [ 1357.238450] [<ffffffff810549f1>] kthread+0xb1/0xb9 [ 1357.238450] [<ffffffff8149b49d>] ? wait_for_common+0xbb/0x10a [ 1357.238450] [<ffffffff81054940>] ? __init_kthread_worker+0x59/0x59 [ 1357.238450] [<ffffffff814a40ec>] ret_from_fork+0x7c/0xb0 [ 1357.238450] [<ffffffff81054940>] ? __init_kthread_worker+0x59/0x59 [ 1417.440099] rport-2:0-0: blocked FC remote port time out: removing rport Signed-off-by: Yi Zou <yi.zou@intel.com> Cc: Open-FCoE <devel@open-fcoe.org> Cc: Nicholas A. Bellinger <nab@risingtidesystems.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17libata: fix Null pointer dereference on disk errorXiaotian Feng
commit 26cd4d65deba587f3cf2329b6869ce02bcbe68ec upstream. Following oops were observed when disk error happened: [ 4272.896937] sd 0:0:0:0: [sda] Unhandled error code [ 4272.896939] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 4272.896942] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 5a de a7 00 00 08 00 [ 4272.896951] end_request: I/O error, dev sda, sector 5955239 [ 4291.574947] BUG: unable to handle kernel NULL pointer dereference at (null) [ 4291.658305] IP: [] ahci_activity_show+0x1/0x40 [ 4291.730090] PGD 76dbbc067 PUD 6c4fba067 PMD 0 [ 4291.783408] Oops: 0000 [#1] SMP [ 4291.822100] last sysfs file: /sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/sw_activity [ 4291.934235] CPU 9 [ 4291.958301] Pid: 27942, comm: hwinfo ...... ata_scsi_find_dev could return NULL, so ata_scsi_activity_{show,store} should check if atadev is NULL. Signed-off-by: Xiaotian Feng <dannyfeng@tencent.com> Cc: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17libata: set dma_mode to 0xff in resetAaron Lu
commit 5416912af75de9cba5d1c75b99a7888b0bbbd2fb upstream. ata_device->dma_mode's initial value is zero, which is not a valid dma mode, but ata_dma_enabled will return true for this value. This patch sets dma_mode to 0xff in reset function, so that ata_dma_enabled will not return true for this case, or it will cause problem for pata_acpi. The corrsponding bugzilla page is at: https://bugzilla.kernel.org/show_bug.cgi?id=49151 Reported-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Aaron Lu <aaron.lu@intel.com> Tested-by: Szymon Janc <szymon@janc.net.pl> Tested-by: Dutra Julio <dutra.julio@gmail.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17sata_promise: fix hardreset lockdep errorMikael Pettersson
commit 3100d49d3cd236443faae9d81137c81b22d36003 upstream. sata_promise's pdc_hard_reset_port() needs to serialize because it flips a port-specific bit in controller register that's shared by all ports. The code takes the ata host lock for this, but that's broken because an interrupt may arrive on our irq during the hard reset sequence, and that too will take the ata host lock. With lockdep enabled a big nasty warning is seen. Fixed by adding private state to the ata host structure, containing a second lock used only for serializing the hard reset sequences. This eliminated the lockdep warnings both on my test rig and on the original reporter's machine. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Tested-by: Adko Branil <adkobranil@yahoo.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17iscsit: use GFP_ATOMIC under spin lockWei Yongjun
commit 3c989d7603872bf878840f7ce3ea49b73bea4c6c upstream. The function iscsit_build_conn_drop_async_message() is called from iscsit_close_connection() with spin lock 'sess->conn_lock' held, so we should use GFP_ATOMIC instead of GFP_KERNEL. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17SCSI: qla2xxx: Test and clear FCPORT_UPDATE_NEEDED atomically.David Jeffery
commit a394aac88506159e047630fc90dc2242568382d8 upstream. When the qla2xxx driver loses access to multiple, remote ports, there is a race condition which can occur which will keep the request stuck on a scsi request queue indefinitely. This bad state occurred do to a race condition with how the FCPORT_UPDATE_NEEDED bit is set in qla2x00_schedule_rport_del(), and how it is cleared in qla2x00_do_dpc(). The problem port has its drport pointer set, but it has never been processed by the driver to inform the fc transport that the port has been lost. qla2x00_schedule_rport_del() sets drport, and then sets the FCPORT_UPDATE_NEEDED bit. In qla2x00_do_dpc(), the port lists are walked and any drport pointer is handled and the fc transport informed of the port loss, then the FCPORT_UPDATE_NEEDED bit is cleared. This leaves a race where the dpc thread is processing one port removal, another port removal is marked with a call to qla2x00_schedule_rport_del(), and the dpc thread clears the bit for both removals, even though only the first removal was actually handled. Until another event occurs to set FCPORT_UPDATE_NEEDED, the later port removal is never finished and qla2xxx stays in a bad state which causes requests to become stuck on request queues. This patch updates the driver to test and clear FCPORT_UPDATE_NEEDED atomically. This ensures the port state changes are processed and not lost. Signed-off-by: David Jeffery <djeffery@redhat.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17SCSI: prevent stack buffer overflow in host_resetSasha Levin
commit 072f19b4bea31cdd482d79f805413f2f9ac9e233 upstream. store_host_reset() has tried to re-invent the wheel to compare sysfs strings. Unfortunately it did so poorly and never bothered to check the input from userspace before overwriting stack with it, so something simple as: echo "WoopsieWoopsie" > /sys/devices/pseudo_0/adapter0/host0/scsi_host/host0/host_reset would result in: [ 316.310101] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffff81f5bac7 [ 316.310101] [ 316.320051] Pid: 6655, comm: sh Tainted: G W 3.7.0-rc5-next-20121114-sasha-00016-g5c9d68d-dirty #129 [ 316.320051] Call Trace: [ 316.340058] pps pps0: PPS event at 1352918752.620355751 [ 316.340062] pps pps0: capture assert seq #303 [ 316.320051] [<ffffffff83b3856b>] panic+0xcd/0x1f4 [ 316.320051] [<ffffffff81f5bac7>] ? store_host_reset+0xd7/0x100 [ 316.320051] [<ffffffff8110b996>] __stack_chk_fail+0x16/0x20 [ 316.320051] [<ffffffff81f5bac7>] store_host_reset+0xd7/0x100 [ 316.320051] [<ffffffff81e55bb3>] dev_attr_store+0x13/0x30 [ 316.320051] [<ffffffff812f7db1>] sysfs_write_file+0x101/0x170 [ 316.320051] [<ffffffff8127acc8>] vfs_write+0xb8/0x180 [ 316.320051] [<ffffffff8127ae80>] sys_write+0x50/0xa0 [ 316.320051] [<ffffffff83c03418>] tracesys+0xe1/0xe6 Fix this by uninventing whatever was going on there and just use sysfs_streq. Bug introduced by 29443691 ("[SCSI] scsi: Added support for adapter and firmware reset"). [jejb: added necessary const to prevent compile warnings] Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17SCSI: mvsas: fix undefined bit shiftXi Wang
commit beecadea1b8d67f591b13f7099559f32f3fd601d upstream. The macro bit(n) is defined as ((u32)1 << n), and thus it doesn't work with n >= 32, such as in mvs_94xx_assign_reg_set(): if (i >= 32) { mvi->sata_reg_set |= bit(i); ... } The shift ((u32)1 << n) with n >= 32 also leads to undefined behavior. The result varies depending on the architecture. This patch changes bit(n) to do a 64-bit shift. It also simplifies mv_ffc64() using __ffs64(), since invoking ffz() with ~0 is undefined. Signed-off-by: Xi Wang <xi.wang@gmail.com> Acked-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17SCSI: mvsas: Fix oops when ata commond timeout.Jianpeng Ma
commit 95ab000388974d8ffef8257306b4be6e8778b768 upstream. Kernel message follows: [ 511.712011] sd 11:0:0:0: [sdf] command ffff8800a4e81400 timed out [ 511.712022] sas: Enter sas_scsi_recover_host busy: 1 failed: 1 [ 511.712024] sas: trying to find task 0xffff8800a4d24c80 [ 511.712026] sas: sas_scsi_find_task: aborting task 0xffff8800a4d24c80 [ 511.712029] drivers/scsi/mvsas/mv_sas.c 1631:mvs_abort_task() mvi=ffff8800b5300000 task=ffff8800a4d24c80 slot=ffff8800b5325038 slot_idx=x0 [ 511.712035] BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 [ 511.712040] IP: [<ffffffff815f8c0c>] _raw_spin_lock_irqsave+0xc/0x30 [ 511.712047] PGD 0 [ 511.712049] Oops: 0002 [#1] SMP [ 511.712052] Modules linked in: mvsas libsas scsi_transport_sas raid456 async_pq async_xor xor async_memcpy async_raid6_recov raid6_pq async_tx [last unloaded: mvsas] [ 511.712062] CPU 3 [ 511.712066] Pid: 7322, comm: scsi_eh_11 Not tainted 3.5.0+ #106 To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M. [ 511.712068] RIP: 0010:[<ffffffff815f8c0c>] [<ffffffff815f8c0c>] _raw_spin_lock_irqsave+0xc/0x30 [ 511.712073] RSP: 0018:ffff880098d3bcb0 EFLAGS: 00010086 [ 511.712074] RAX: 0000000000000286 RBX: 0000000000000058 RCX: 00000000000000c3 [ 511.712076] RDX: 0000000000000100 RSI: 0000000000000046 RDI: 0000000000000058 [ 511.712078] RBP: ffff880098d3bcb0 R08: 000000000000000a R09: 0000000000000000 [ 511.712080] R10: 00000000000004e8 R11: 00000000000004e7 R12: ffff8800a4d24c80 [ 511.712082] R13: 0000000000000050 R14: ffff8800b5325038 R15: ffff8800a4eafe00 [ 511.712084] FS: 0000000000000000(0000) GS:ffff8800bdb80000(0000) knlGS:0000000000000000 [ 511.712086] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 511.712088] CR2: 0000000000000058 CR3: 00000000a4ce6000 CR4: 00000000000407e0 [ 511.712090] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 511.712091] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 511.712093] Process scsi_eh_11 (pid: 7322, threadinfo ffff880098d3a000, task ffff8800a61dde40) [ 511.712095] Stack: [ 511.712096] ffff880098d3bce0 ffffffff81060683 ffff880000000000 0000000000000000 [ 511.712099] ffff8800a4d24c80 ffff8800b5300000 ffff880098d3bcf0 ffffffffa0076a88 [ 511.712102] ffff880098d3bd50 ffffffffa0079bb5 ffff880000000000 ffff880000000018 [ 511.712106] Call Trace: [ 511.712110] [<ffffffff81060683>] complete+0x23/0x60 [ 511.712115] [<ffffffffa0076a88>] mvs_tmf_timedout+0x18/0x20 [mvsas] [ 511.712119] [<ffffffffa0079bb5>] mvs_slot_complete+0x765/0x7d0 [mvsas] [ 511.712125] [<ffffffffa005a17d>] sas_scsi_recover_host+0x55d/0xdb0 [libsas] [ 511.712128] [<ffffffff8106d600>] ? idle_balance+0xe0/0x130 [ 511.712133] [<ffffffff813b150c>] scsi_error_handler+0xcc/0x470 [ 511.712136] [<ffffffff815f7ad0>] ? __schedule+0x370/0x730 [ 511.712139] [<ffffffff8105f728>] ? __wake_up_common+0x58/0x90 [ 511.712142] [<ffffffff813b1440>] ? scsi_eh_get_sense+0x110/0x110 [ 511.712146] [<ffffffff810571be>] kthread+0x8e/0xa0 [ 511.712150] [<ffffffff816015f4>] kernel_thread_helper+0x4/0x10 [ 511.712153] [<ffffffff81057130>] ? flush_kthread_work+0x120/0x120 [ 511.712156] [<ffffffff816015f0>] ? gs_change+0xb/0xb [ 511.712157] Code: 8a 00 01 00 00 89 d0 f0 66 0f b1 0f 66 39 d0 0f 94 c0 0f b6 c0 5d c3 0f 1f 84 00 00 00 00 00 55 48 89 e5 9c 58 fa ba 00 01 00 00 <f0> 66 0f c1 17 0f b6 ce 38 d1 74 11 0f 1f 84 00 00 00 00 00 f3 [ 511.712191] RIP [<ffffffff815f8c0c>] _raw_spin_lock_irqsave+0xc/0x30 [ 511.712194] RSP <ffff880098d3bcb0> [ 511.712196] CR2: 0000000000000058 [ 511.712198] ---[ end trace a781c7b1e65db92c ]--- Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Cc: CAI Qian <caiqian@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17ASoC: sigmadsp: Fix endianness conversion issueLars-Peter Clausen
commit a3adb1432d7a3ad86bb17a1638e44414537e4118 upstream. The 'addr' field of the sigma_action struct is stored as big endian in the firmware file. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17firewire: net: Fix handling of fragmented multicast/broadcast packets.Stephan Gatzka
commit 9d2373420900a39f5212a3b289331aa3535b1000 upstream. This patch fixes both the transmit and receive portion of sending fragmented mutlicast and broadcast packets. The transmit section was broken because the offset for INTFRAG and LASTFRAG packets were just miscalculated by IEEE1394_GASP_HDR_SIZE (which was reserved with skb_push() in fwnet_send_packet). The receive section was broken because in fwnet_incoming_packet is a call to fwnet_peer_find_by_node_id(). Called with generation == -1 it will not find a peer and the partial datagrams are associated to a peer. [Stefan R: The fix to use context->card->generation is not perfect. It relies on the IR tasklet which processes packets from the prior bus generation to run before the self-ID-complete worklet which sets the current card generation. Alas, there is no simple way of a race-free implementation. Let's do it this way for now.] Signed-off-by: Stephan Gatzka <stephan.gatzka@gmail.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17ath9k_hw: Fix signal strength / channel noise reportingFelix Fietkau
commit b7c0c238898d200e80487516e2b67aba2a522cc0 upstream. While AR_PHY_CCA_NOM_VAL_* does contain the expected internal noise floor for a chip measured in clean air, it refers to the lowest expected reading. Depending on the frequency, this measurement can vary by about 6db, thus causing a higher reported channel noise and signal strength. Factor in the 6db offset when converting internal noisefloor to channel noise. This patch makes the reported values more accurate for all chips without affecting NF calibration behavior. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17ath9k: ar9003: fix OTP register offsets for AR9340Gabor Juhos
commit b3cd8021379306c0be6932e4d3b4b01efc681769 upstream. Trying to access the OTP memory on the AR9340 causes a data bus error like this: Data bus error, epc == 86e84164, ra == 86e84164 Oops[#1]: Cpu 0 $ 0 : 00000000 00000061 deadc0de 00000000 $ 4 : b8115f18 00015f18 00000007 00000004 $ 8 : 00000001 7c7c3c7c 7c7c7c7c 7c7c7c7c $12 : 7c7c3c7c 001f0041 00000000 7c7c7c3c $16 : 86ee0000 00015f18 00000000 00000007 $20 : 00000004 00000064 00000004 86d71c44 $24 : 00000000 86e6ca00 $28 : 86d70000 86d71b20 86ece0c0 86e84164 Hi : 00000000 Lo : 00000064 epc : 86e84164 ath9k_hw_wait+0x58/0xb0 [ath9k_hw] Tainted: G O ra : 86e84164 ath9k_hw_wait+0x58/0xb0 [ath9k_hw] Status: 1100d403 KERNEL EXL IE Cause : 4080801c PrId : 0001974c (MIPS 74Kc) Modules linked in: ath9k(O+) ath9k_common(O) ath9k_hw(O) ath(O) ar934x_nfc mac80211(O) usbcore usb_common scsi_mod nls_base nand nand_ecc nand_ids crc_ccitt cfg80211(O) compat(O) arc4 aes_generic crypto_blkcipher cryptomgr aead crypto_hash crypto_algapi ledtrig_timer ledtrig_default_on leds_gpio Process insmod (pid: 459, threadinfo=86d70000, task=87942140, tls=779ac440) Stack : 802fb500 000200da 804db150 804e0000 87816130 86ee0000 00010000 86d71b88 86d71bc0 00000004 00000003 86e9fcd0 80305300 0002c0d0 86e74c50 800b4c20 000003e8 00000001 00000000 86ee0000 000003ff 86e9fd64 80305300 80123938 fffffffc 00000004 000058bc 00000000 86ea0000 86ee0000 000001ff 878d6000 99999999 86e9fdc0 86ee0fcc 86e9e664 0000c0d0 86ee0000 0000700000007000 ... Call Trace: [<86e84164>] ath9k_hw_wait+0x58/0xb0 [ath9k_hw] [<86e9fcd0>] ath9k_hw_setup_statusring+0x16b8/0x1c7c [ath9k_hw] Code: 0000a812 0040f809 00000000 <00531024> 1054000b 24020001 0c05b5dc 2404000a 26520001 The cause of the error is that the OTP register offsets are different on the AR9340 than the actually used values. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17Revert "ath9k_hw: Update AR9003 high_power tx gain table"Felix Fietkau
commit 9c170e068636deb3e3f96114034bb711675f0faa upstream. This reverts commit f74b9d365ddd33a375802b064f96a5d0e99af7c0. Turns out reverting commit a240dc7b3c7463bd60cf0a9b2a90f52f78aae0fd "ath9k_hw: Updated AR9003 tx gain table for 5GHz" was not enough to bring the tx power back to normal levels on devices like the Buffalo WZR-HP-G450H, this one needs to be reverted as well. This revert improves tx power by ~10 db on that device Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: rmanohar@qca.qualcomm.com Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17mm: use aligned zone start for pfn_to_bitidx calculationLaura Abbott
commit c060f943d0929f3e429c5d9522290584f6281d6e upstream. The current calculation in pfn_to_bitidx assumes that (pfn - zone->zone_start_pfn) >> pageblock_order will return the same bit for all pfn in a pageblock. If zone_start_pfn is not aligned to pageblock_nr_pages, this may not always be correct. Consider the following with pageblock order = 10, zone start 2MB: pfn | pfn - zone start | (pfn - zone start) >> page block order ---------------------------------------------------------------- 0x26000 | 0x25e00 | 0x97 0x26100 | 0x25f00 | 0x97 0x26200 | 0x26000 | 0x98 0x26300 | 0x26100 | 0x98 This means that calling {get,set}_pageblock_migratetype on a single page will not set the migratetype for the full block. Fix this by rounding down zone_start_pfn when doing the bitidx calculation. For our use case, the effects of this bug were mostly tied to the fact that CMA allocations would either take a long time or fail to happen. Depending on the driver using CMA, this could result in anything from visual glitches to application failures. Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Acked-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17mm: compaction: fix echo 1 > compact_memory return error issueJason Liu
commit 7964c06d66c76507d8b6b662bffea770c29ef0ce upstream. when run the folloing command under shell, it will return error sh/$ echo 1 > /proc/sys/vm/compact_memory sh/$ sh: write error: Bad address After strace, I found the following log: ... write(1, "1\n", 2) = 3 write(1, "", 4294967295) = -1 EFAULT (Bad address) write(2, "echo: write error: Bad address\n", 31echo: write error: Bad address ) = 31 This tells system return 3(COMPACT_COMPLETE) after write data to compact_memory. The fix is to make the system just return 0 instead 3(COMPACT_COMPLETE) from sysctl_compaction_handler after compaction_nodes finished. Signed-off-by: Jason Liu <r64343@freescale.com> Suggested-by: David Rientjes <rientjes@google.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17MIPS: Fix poweroff failure when HOTPLUG_CPU configured.Huacai Chen
commit 8add1ecb81f541ef2fcb0b85a5470ad9ecfb4a84 upstream. When poweroff machine, kernel_power_off() call disable_nonboot_cpus(). And if we have HOTPLUG_CPU configured, disable_nonboot_cpus() is not an empty function but attempt to actually disable the nonboot cpus. Since system state is SYSTEM_POWER_OFF, play_dead() won't be called and thus disable_nonboot_cpus() hangs. Therefore, we make this patch to avoid poweroff failure. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Hongliang Tao <taohl@lemote.com> Signed-off-by: Hua Yan <yanh@lemote.com> Cc: Yong Zhang <yong.zhang@windriver.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/4211/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17s390/cio: fix pgid reserved checkSebastian Ott
commit d99e79ec5574fc556c988f613ed6175f6de66f4a upstream. The check to whom a device is reserved is done by checking the path state of the affected channel paths. If it turns out that one path is flagged as reserved by someone else the whole device is marked as such. However the meaning of the RESVD_ELSE bit is that the addressed device is reserved to a different pathgroup (and not reserved to a different LPAR). If we do this test on a path which is currently not a member of the pathgroup we could erroneously mark the device as reserved to someone else. To fix this collect the reserved state for all potential members of the pathgroup and only mark the device as reserved if all of those potential members have the RESVD_ELSE bit set. Acked-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17KVM: Fix user memslot overlap checkAlex Williamson
commit 5419369ed6bd4cf711fdda5e52a5999b940413f5 upstream. Prior to memory slot sorting this loop compared all of the user memory slots for overlap with new entries. With memory slot sorting, we're just checking some number of entries in the array that may or may not be user slots. Instead, walk all the slots with kvm_for_each_memslot, which has the added benefit of terminating early when we hit the first empty slot, and skip comparison to private slots. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17powerpc: Add missing NULL terminator to avoid boot panic on PPC40xGabor Juhos
commit e6449c9b2d90c1bd9a5985bf05ddebfd1631cd6b upstream. The missing NULL terminator can cause a panic on PPC405 boards during boot: Linux/PowerPC load: console=ttyS0,115200 root=/dev/mtdblock1 rootfstype=squashfs,jffs2 noinitrd init=/etc/preinit Finalizing device tree... flat tree at 0x6a5160 bootconsole [udbg0] enabled Page fault in user mode with in_atomic() = 1 mm = (null) NIP = c0275f50 MSR = fffffffe Oops: Weird page fault, sig: 11 [#1] PowerPC 40x Platform Modules linked in: NIP: c0275f50 LR: c0275f60 CTR: c0280000 REGS: c0275eb0 TRAP: 636f7265 Not tainted (3.7.1) MSR: fffffffe <VEC,VSX,EE,PR,FP,ME,SE,BE,IR,DR,PMM,RI> CR: c06a6190 XER: 00000001 TASK = c02662a8[0] 'swapper' THREAD: c0274000 GPR00: c0275ec0 c000c658 c027c4bf 00000000 c0275ee0 c000a0ec c020a1a8 c020a1f0 GPR08: c020f631 c020f404 c025f078 c025f080 c0275f10 Call Trace: ---[ end trace 31fd0ba7d8756001 ]--- Kernel panic - not syncing: Attempted to kill the idle task! The panic happens since commit 9597abe00c1bab2aedce6b49866bf6d1e81c9eed (sections: fix section conflicts in arch/powerpc), however the root cause of this is that the NULL terminator were not added in commit a4f740cf33f7f6c164bbde3c0cdbcc77b0c4997c (of/flattree: Add of_flat_dt_match() helper function). Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17powerpc/vdso: Remove redundant locking in update_vsyscall_tz()Shan Hai
commit ce73ec6db47af84d1466402781ae0872a9e7873c upstream. The locking in update_vsyscall_tz() is not only unnecessary because the vdso code copies the data unproteced in __kernel_gettimeofday() but also introduces a hard to reproduce race condition between update_vsyscall() and update_vsyscall_tz(), which causes user space process to loop forever in vdso code. The following patch removes the locking from update_vsyscall_tz(). Locking is not only unnecessary because the vdso code copies the data unprotected in __kernel_gettimeofday() but also erroneous because updating the tb_update_count is not atomic and introduces a hard to reproduce race condition between update_vsyscall() and update_vsyscall_tz(), which further causes user space process to loop forever in vdso code. The below scenario describes the race condition, x==0 Boot CPU other CPU proc_P: x==0 timer interrupt update_vsyscall x==1 x++;sync settimeofday update_vsyscall_tz x==2 x++;sync x==3 sync;x++ sync;x++ proc_P: x==3 (loops until x becomes even) Because the ++ operator would be implemented as three instructions and not atomic on powerpc. A similar change was made for x86 in commit 6c260d58634 ("x86: vdso: Remove bogus locking in update_vsyscall_tz") Signed-off-by: Shan Hai <shan.hai@windriver.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17powerpc: Fix CONFIG_RELOCATABLE=y CONFIG_CRASH_DUMP=n buildAnton Blanchard
commit 11ee7e99f35ecb15f59b21da6a82d96d2cd3fcc8 upstream. If we build a kernel with CONFIG_RELOCATABLE=y CONFIG_CRASH_DUMP=n, the kernel fails when we run at a non zero offset. It turns out we were incorrectly wrapping some of the relocatable kernel code with CONFIG_CRASH_DUMP. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17bcma: mips: fix clearing device IRQRafał Miłecki
commit cbbc0138efe1dcd5426b8fc5d87741f5057aee72 upstream. We were using wrong IRQ number so clearing wasn't working at all. Depending on a platform this could result in a one device having two interrupts assigned. On BCM4706 this resulted in all IRQs being broken. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17ath5k: fix tx path skb leaksFelix Fietkau
commit 596ab5ec3bf10a22be30d7cb1d903a4b83fd607c upstream. ieee80211_free_txskb() needs to be used instead of dev_kfree_skb_any for tx packets passed to the driver from mac80211 Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17regulator: wm831x: Set the new rather than old value for DVS VSELMark Brown
commit 13ae633cf729b0ecb677b75b04886ff8fada8fad upstream. Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11Linux 3.4.25v3.4.25Greg Kroah-Hartman
2013-01-11can: Do not call dev_put if restart timer is running upon closeAlexander Stein
commit ab48b03ec9ae1840a1e427e2375bd0d9d554b4ed upstream. If the restart timer is running due to BUS-OFF and the device is disconnected an dev_put will decrease the usage counter to -1 thus blocking the interface removal, resulting in the following dmesg lines repeating every 10s: can: notifier: receive list not found for dev can0 can: notifier: receive list not found for dev can0 can: notifier: receive list not found for dev can0 unregister_netdevice: waiting for can0 to become free. Usage count = -1 Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11HID: Add Apple wireless keyboard 2011 ANSI to special driver listBen Hutchings
commit f9af7b9edccb87d4d80b58687ab63e58f3b64c4c upstream. Commit 0a97e1e9f9a6 ('HID: apple: Add Apple wireless keyboard 2011 ANSI PID') did not update the special driver list in hid-core.c, so hid-generic may still bind to this device. Reported-by: Ari Pollak <ari@scvngr.com> References: http://bugs.debian.org/694546 Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11mm: limit mmu_gather batching to fix soft lockups on !CONFIG_PREEMPTMichal Hocko
commit 53a59fc67f97374758e63a9c785891ec62324c81 upstream. Since commit e303297e6c3a ("mm: extended batches for generic mmu_gather") we are batching pages to be freed until either tlb_next_batch cannot allocate a new batch or we are done. This works just fine most of the time but we can get in troubles with non-preemptible kernel (CONFIG_PREEMPT_NONE or CONFIG_PREEMPT_VOLUNTARY) on large machines where too aggressive batching might lead to soft lockups during process exit path (exit_mmap) because there are no scheduling points down the free_pages_and_swap_cache path and so the freeing can take long enough to trigger the soft lockup. The lockup is harmless except when the system is setup to panic on softlockup which is not that unusual. The simplest way to work around this issue is to limit the maximum number of batches in a single mmu_gather. 10k of collected pages should be safe to prevent from soft lockups (we would have 2ms for one) even if they are all freed without an explicit scheduling point. This patch doesn't add any new explicit scheduling points because it relies on zap_pmd_range during page tables zapping which calls cond_resched per PMD. The following lockup has been reported for 3.0 kernel with a huge process (in order of hundreds gigs but I do know any more details). BUG: soft lockup - CPU#56 stuck for 22s! [kernel:31053] Modules linked in: af_packet nfs lockd fscache auth_rpcgss nfs_acl sunrpc mptctl mptbase autofs4 binfmt_misc dm_round_robin dm_multipath bonding cpufreq_conservative cpufreq_userspace cpufreq_powersave pcc_cpufreq mperf microcode fuse loop osst sg sd_mod crc_t10dif st qla2xxx scsi_transport_fc scsi_tgt netxen_nic i7core_edac iTCO_wdt joydev e1000e serio_raw pcspkr edac_core iTCO_vendor_support acpi_power_meter rtc_cmos hpwdt hpilo button container usbhid hid dm_mirror dm_region_hash dm_log linear uhci_hcd ehci_hcd usbcore usb_common scsi_dh_emc scsi_dh_alua scsi_dh_hp_sw scsi_dh_rdac scsi_dh dm_snapshot pcnet32 mii edd dm_mod raid1 ext3 mbcache jbd fan thermal processor thermal_sys hwmon cciss scsi_mod Supported: Yes CPU 56 Pid: 31053, comm: kernel Not tainted 3.0.31-0.9-default #1 HP ProLiant DL580 G7 RIP: 0010: _raw_spin_unlock_irqrestore+0x8/0x10 RSP: 0018:ffff883ec1037af0 EFLAGS: 00000206 RAX: 0000000000000e00 RBX: ffffea01a0817e28 RCX: ffff88803ffd9e80 RDX: 0000000000000200 RSI: 0000000000000206 RDI: 0000000000000206 RBP: 0000000000000002 R08: 0000000000000001 R09: ffff887ec724a400 R10: 0000000000000000 R11: dead000000200200 R12: ffffffff8144c26e R13: 0000000000000030 R14: 0000000000000297 R15: 000000000000000e FS: 00007ed834282700(0000) GS:ffff88c03f200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 000000000068b240 CR3: 0000003ec13c5000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process kernel (pid: 31053, threadinfo ffff883ec1036000, task ffff883ebd5d4100) Call Trace: release_pages+0xc5/0x260 free_pages_and_swap_cache+0x9d/0xc0 tlb_flush_mmu+0x5c/0x80 tlb_finish_mmu+0xe/0x50 exit_mmap+0xbd/0x120 mmput+0x49/0x120 exit_mm+0x122/0x160 do_exit+0x17a/0x430 do_group_exit+0x3d/0xb0 get_signal_to_deliver+0x247/0x480 do_signal+0x71/0x1b0 do_notify_resume+0x98/0xb0 int_signal+0x12/0x17 DWARF2 unwinder stuck at int_signal+0x12/0x17 Signed-off-by: Michal Hocko <mhocko@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11drivers/rtc/rtc-vt8500.c: fix handling of data passed in struct rtc_timeTony Prisk
commit 2f90b68309683f2c5765a1b04ca23d71e51f1494 upstream. tm_mon is 0..11, whereas vt8500 expects 1..12 for the month field, causing invalid date errors for January, and causing the day field to roll over incorrectly. The century flag is only handled in vt8500_rtc_read_time, but not set in vt8500_rtc_set_time. This patch corrects the behaviour of the century flag. Signed-off-by: Edgar Toernig <froese@gmx.de> Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11drivers/rtc/rtc-vt8500.c: correct handling of CR_24H bitfieldTony Prisk
commit 532db570e5181abc8f4f7bfa6c77c69ec2240198 upstream. Control register bitfield for 12H/24H mode is handled incorrectly. Setting CR_24H actually enables 12H mode. This patch renames the define and changes the initialization code to correctly set 24H mode. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Cc: Edgar Toernig <froese@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11CRIS: fix I/O macrosCorey Minyard
commit c24bf9b4cc6a0f330ea355d73bfdf1dae7e63a05 upstream. The inb/outb macros for CRIS are broken from a number of points of view, missing () around parameters and they have an unprotected if statement in them. This was breaking the compile of IPMI on CRIS and thus I was being annoyed by build regressions, so I fixed them. Plus I don't think they would have worked at all, since the data values were missing "&" and the outsl had a "3" instead of a "4" for the size. From what I can tell, this stuff is not used at all, so this can't be any more broken than it was before, anyway. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Mikael Starvik <starvik@axis.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11lib: atomic64: Initialize locks statically to fix early usersStephen Boyd
commit fcc16882ac4532aaa644bff444f0c5d6228ba71e upstream. The atomic64 library uses a handful of static spin locks to implement atomic 64-bit operations on architectures without support for atomic 64-bit instructions. Unfortunately, the spinlocks are initialized in a pure initcall and that is too late for the vfs namespace code which wants to use atomic64 operations before the initcall is run. This became a problem as of commit 8823c079ba71: "vfs: Add setns support for the mount namespace". This leads to BUG messages such as: BUG: spinlock bad magic on CPU#0, swapper/0/0 lock: atomic64_lock+0x240/0x400, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 do_raw_spin_lock+0x158/0x198 _raw_spin_lock_irqsave+0x4c/0x58 atomic64_add_return+0x30/0x5c alloc_mnt_ns.clone.14+0x44/0xac create_mnt_ns+0xc/0x54 mnt_init+0x120/0x1d4 vfs_caches_init+0xe0/0x10c start_kernel+0x29c/0x300 coming out early