aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-10-02ASoC: omap: Use single hw_params callback in sdp3430 and zoom2Jarkko Nikula
There is no need to use two hw_params callbacks in sdp3430 and zoom2 as thet are now identical. Use instead the same snd_soc_ops structure and hw_params callback for both DAI links. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-02ASoC: omap: Convert bunch of machine drivers to use init time DAI formatJarkko Nikula
Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-02ASoC: omap-mcbsp: Prepare for init time DAI format settingJarkko Nikula
Before commit 75d9ac4 ("ASoC: Allow DAI formats to be specified in the dai_link") expectation for omap-mcbsp was that snd_soc_dai_set_fmt is to be called first in machine hw_params callback before other CPU DAI functions. Thus it was enough that only omap_mcbsp_dai_set_dai_fmt cleared the mcbsp->regs structure. [Note that this was pure convention, it's always been OK to set things on init -- broonie] Now this doesn't hold anymore since machine drivers can set the DAI format only once on init time and thus mcbsp->regs may get out of sync when other CPU DAI functions are modifying them dynamically with different values between the calls. Therefore clear the accessed mcbsp->regs bits and bitfields in other functions too. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-30ASoC: tlv320aic3x: Use driver_data field of struct i2c_device_id to identify ↵Axel Lin
models Save model information in driver_data so we can simplify the implementation. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-30ASoC: twl6040: Simplify code in out_drv_event for pending work checkPeter Ujfalusi
Instead of checking, if the work is pending, it is safer to cancel the pending work, or wait till the scheduled work finishes. This way we can avoid modifying the variables used by the work function. Since we know that no work is pending, we can remove the two additional checks in POST_PMU, and PRE_PMD for non pending works. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-30ASoC: twl6040: Shift 2 identifies the HS output in out_drv_eventPeter Ujfalusi
None of the driver handled by out_drv_event have it's power bit shifted by 3. Remove the case for shift 3, and also add comment for the cases. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-30ASoC: twl6040: correct loop counters for HS/HF ramp codePeter Ujfalusi
The Headset gain range is 0 - 0xf (4 bit resolution) The Handsfree gain range is 0 - 0x1d (5 bit resolution, 0x1e, and 0x1f values are invalid) Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-30ASoC: twl6040: One workqueue should be enoughPeter Ujfalusi
It is a bit overkill to have three (3) separate workqueue for a single driver. We can manage things with one workqueue nicely. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-30ASoC: omap-mcbsp: Fix FS polarity for LEFT_J, DSP_A and DSP_B formatsJarkko Nikula
Commit 75d9ac4 ("ASoC: Allow DAI formats to be specified in the dai_link") changed DAI format flag values and we cannot simply invert anymore e.g. frame-sync with ^= SND_SOC_DAIFMT_NB_IF (which was anyway misuse) as there is no anymore fixed bit position for bit-clock or frame-sync inversion. Fix this by relying only on DAI format flag values passed to us and by not making any assumption on individual bit positions. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-30ASoC: sn95031: Do not use static variable for channel_indexAxel Lin
No reason to use static variable for channel_index. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-30ASoC: Add missed regulator_unregister_notifier and regulator_bulk_free in ↵Axel Lin
wm8995_remove Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-30ASoC: Remove unused "control_data" field of struct aic3x_privAxel Lin
The control_data field is used to initialize the codec's control_data field, but since this is also done by the snd-soc-cache core, the redundant assignment can be removed and the field can be dropped. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-30ASoC: sdp4430: Fix string for FM input nameUjfalusi, Peter
The name contains invalid valid character (/), which causes problems when trying to create the debugfs directory structure: ASoC: Failed to create Aux/FM Stereo In debugfs file Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-30ASoC: Davinci: Fix FS polarity for I2S formatJarkko Nikula
Commit 75d9ac4 ("ASoC: Allow DAI formats to be specified in the dai_link") changed DAI format flag values and we cannot simply invert anymore e.g. frame-sync with ^= SND_SOC_DAIFMT_NB_IF (which was anyway misuse) as there is no anymore fixed bit position for bit-clock or frame-sync inversion. Fix this by relying only on DAI format flag values passed to us and by not making any assumption on individual bit positions Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Vaibhav Bedia <vaibhav.bedia@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-30ASoC: Remove unused "control_data" field of struct cs4271_privateAxel Lin
The control_data field is used to initialize the codec's control_data field, but since this is also done by the snd-soc-cache core, the redundant assignment can be removed and the field can be dropped. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-30ASoC: Remove unused function check_vdac_to_outmix from rt5631Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-30ASoC: Staticise non-exported symbols in rt5631Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-29ASoC: Fix a bug in WM8962 DSP_A and DSP_B settingsSusan Gao
Signed-off-by: Susan Gao <sgao@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmico.com> Cc: stable@kernel.org
2011-09-29ASoC: tlv320dac33: Add guarding parentheses to macrosAxel Lin
Put parentheses around macro argument uses. This avoids pitfalls for the programmer, where the argument expansion does not give the expected result, for example: SAMPLES_TO_US(substream->runtime->rate, dac33->uthr - DAC33_MODE7_MARGIN + 1); Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-28ASoC: Also count neighbour checks for suppliesMark Brown
Missed when the stat was originally added. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-28ASoC: Use dai_fmt in speyside_wm8962Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-28ASoC: Allow DAI formats to be specified in the dai_linkMark Brown
For almost all machines the DAI format is a constant, always set to the same thing. This means that not only should we normally set it on init rather than in hw_params() (where it has been for historical reasons) we should also allow users to configure this by setting a variable in the dai_link structure. The combination of these two will make many machine drivers even more data driven. Implement a new dai_fmt field in the dai_link doing just that. Since 0 is a valid value for many format flags and we need to be able to tell if the field is actually set also add one to all the values used to configure formats. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-28ASoC: adau1701: Fix prototype for adau1701_set_sysclkAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-28ASoC: Remove unused "control_data" field of struct ak4671_privAxel Lin
The control_data field is used to initialize the codec's control_data field, but since this is also done by the snd-soc-cache core, the redundant assignment can be removed and the field can be dropped. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-28ASoC: Remove unused "control_data" field of struct max98095_privAxel Lin
The control_data field is used to initialize the codec's control_data field, but since this is also done by the snd-soc-cache core, the redundant assignment can be removed and the field can be dropped. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-28ASoC: Remove unused "control_data" field of struct max98088_privAxel Lin
The control_data field is used to initialize the codec's control_data field, but since this is also done by the snd-soc-cache core, the redundant assignment can be removed and the field can be dropped. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-28ASoC: Remove unused "control_data" field of struct cs42l51_privateAxel Lin
The control_data field is used to initialize the codec's control_data field, but since this is also done by the snd-soc-cache core, the redundant assignment can be removed and the field can be dropped. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-28ASoC: Remove unused "control_data" field of struct cs4270_privateAxel Lin
The control_data field is used to initialize the codec's control_data field, but since this is also done by the snd-soc-cache core, the redundant assignment can be removed and the field can be dropped. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-28ASoC: Remove unused "control_data" field of struct alc5623_privAxel Lin
The control_data field is used to initialize the codec's control_data field, but since this is also done by the snd-soc-cache core, the redundant assignment can be removed and the field can be dropped. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-28ASoC: adau1701: Initialize codec->control_data before using itAxel Lin
Currently codec->control_data is not initialized before calling process_sigma_firmware(codec->control_data, ADAU1701_FIRMWARE). Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-28ASoC: Fix setting adau1373_dai->master for SND_SOC_DAIFMT_CBS_CFSAxel Lin
In the case of SND_SOC_DAIFMT_CBS_CFS, adau1373_dai->master should be false. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-27ASoC: Remove unused "control_data" field of struct wm8904_privAxel Lin
The control_data field is used to initialize the codec's control_data field, but since this is also done by the snd-soc-cache core, the redundant assignment can be removed and the field can be dropped. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-27ASoC: Remove unused "control_data" field of struct wm9090_privAxel Lin
The control_data field is used to initialize the codec's control_data field, but since this is also done by the snd-soc-cache core, the redundant assignment can be removed and the field can be dropped. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-27ASoC: Remove unused "control_data" field of struct wm9081_privAxel Lin
The control_data field is used to initialize the codec's control_data field, but since this is also done by the snd-soc-cache core, the redundant assignment can be removed and the field can be dropped. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-27ASoC: Remove unused "control_data" field of struct wm8978_privAxel Lin
The control_data field is used to initialize the codec's control_data field, but since this is also done by the snd-soc-cache core, the redundant assignment can be removed and the field can be dropped. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-27ASoC: Remove unused "control_data" field of struct wm8960_privAxel Lin
The control_data field is used to initialize the codec's control_data field, but since this is also done by the snd-soc-cache core, the redundant assignment can be removed and the field can be dropped. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-27ASoC: Remove unused "control_data" field of struct wm8940_privAxel Lin
The control_data field is used to initialize the codec's control_data field, but since this is also done by the snd-soc-cache core, the redundant assignment can be removed and the field can be dropped. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-27ASoC: Add device ID for WM9093 to WM9090 driverMark Brown
The WM9093 is an enhanced version of the WM9093. Add the device ID to the driver, further patches will add support for the additional features in the WM9093. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-27ASoC: Add DRC control for WM8996Karl Tsou
Signed-off-by: Karl Tsou <karl@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-27ASoC: ssm2602: Support setting the oscillator and the clock output stateLars-Peter Clausen
Currently the oscillator is always enabled and the clock output is always disabled. This patch adds support for controlling the oscillator and clock output state through snd_soc_dai_set_sysclk. Which makes it possible to disable or enable them dynamically according to the requirements of the board on which the CODEC is used. This patch also slightly modifies the behavior as to when the oscillator is going to be disabled in low-power states. Previously it would only be disabled in BIAS_OFF, now it is also going to be disabled in BIAS_STANDBY, since no components which depend on it should be active in this state. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-27ASoC: ssm2602: Set initial bias level to standbyLars-Peter Clausen
Set the initial bias level to standby during CODEC probe instead of leaving the CODEC powered off. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-27ASoC: Staticise sst_platform_daiAxel Lin
It is not used outside this driver so no need to make the symbol global. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-27ASoC: Remove unused fields in struct mfld_mc_privateAxel Lin
Both *socdev and *codec of struct mfld_mc_private are not being used in this driver, remove it. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-27Merge branch 'for-3.1' into for-3.2Mark Brown
2011-09-27ASoC: ssm2602: Re-enable oscillator after suspendLars-Peter Clausen
Currently the the internal oscillator is powered down when entering BIAS_OFF state, but not re-enabled when going back to BIAS_STANDBY. As a result the CODEC will stop working after suspend if the internal oscillator is used to generate the sysclock signal. This patch fixes it by clearing the appropriate bit in the power down register when the CODEC is re-enabled. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-09-26ASoC: twl6040: No need to change delay during HF rampPeter Ujfalusi
The Handsfree gain have 2dB steps all the way, so there is no reason to have different delays as we approaching to the end of the scale. The comment was also wrong, since we have 0dB at 0x3 raw, at 16 the gain is -26dB. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-26ASoC: twl6040: No need to change delay during HS rampPeter Ujfalusi
The Headset gain have 2dB steps all the way, so there is no reason to have different delays as we approaching to the end of the scale. The comment was also wrong, since we have 0dB at 0x0 raw at one end of the range, and not in the middle. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-26ASoC: twl6040: Move the delayed_work for HS detection under twl6040_jack_dataPeter Ujfalusi
The delayed_work named 'delayed_work' is for the headset detection, so move it to the twl6040_jack_data struct. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-26ASoC: twl6040: Move delayed_work struct inside twl6040_output for HS/HFPeter Ujfalusi
The delayed works for the output can be moved within the twl6040_output struct (from the twl6040_data) to be better organized. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-26ASoC: twl6040: Combine the custom volsw get, and put functionsPeter Ujfalusi
We can manage with one set of get, and put function for the gain controls we need to handle with custom code due to the shadowing of the register. For both get, and put function we can call decide based on the mc->rreg value, if we need to call the volsw, or the vlosw_2r variant (in 2r case rreg is not 0). Handling of the shadow values are the same for both type of controls. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-28 22:19:38 +0000