| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
In clip_mkip(), skb->dev is dereferenced after clip_push(),
which frees up skb.
Advisory: AD_LAB-06009 (<adlab@venustech.com.cn>).
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
Add a modeline for the Philips 200W display. aty128fb does not do DDC, it
picks 1920x1440 or similar. It works ok with nvidiafb because it can ask
for DDC data.
mode "1680x1050-60"
# D: 146.028 MHz, H: 65.191 kHz, V: 59.863 Hz
geometry 1680 1050 1680 1050 16
timings 6848 280 104 30 3 176 6
hsync high
vsync high
rgba 5/11,6/5,5/0,0/0
endmode
hwinfo --monitor
20: None 00.0: 10000 Monitor
[Created at monitor.206]
Unique ID: rdCR.pzUFTofo1S4
Parent ID: 002j.bJRsY88eNSC
Hardware Class: monitor
Model: "PHILIPS Philips 200W"
Vendor: PHL "PHILIPS"
Device: eisa 0x0832 "Philips 200W"
Serial ID: "VN 016596"
Resolution: 720x400@70Hz
Resolution: 640x480@60Hz
Resolution: 640x480@67Hz
Resolution: 640x480@72Hz
Resolution: 640x480@75Hz
Resolution: 800x600@56Hz
Resolution: 800x600@60Hz
Resolution: 800x600@72Hz
Resolution: 800x600@75Hz
Resolution: 832x624@75Hz
Resolution: 1024x768@60Hz
Resolution: 1024x768@70Hz
Resolution: 1024x768@75Hz
Resolution: 1280x1024@75Hz
Resolution: 1152x864@70Hz
Resolution: 1152x864@75Hz
Resolution: 1280x960@60Hz
Resolution: 1280x1024@60Hz
Resolution: 1680x1050@60Hz
Size: 433x271 mm
Driver Info #0:
Max. Resolution: 1680x1050
Vert. Sync Range: 56-85 Hz
Hor. Sync Range: 30-93 kHz
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #5 (VGA compatible controller)
Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
Don't program the GMAC to reject flow control packets.
This maybe the cause of some of the transmit hangs.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
Fix support for fiber based devices. Needed to keep track of PMD type to
add workaround in setup. Add support for gigabit half duplex fiber.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
Several code paths assume an additional 16 bytes of header padding
on the receive path. Use dev_alloc_skb to get that padding.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
Backport the budget driver DISEQC instability fix.
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
Backport fix to artec USB DVB devices
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
The budget-av needs this GPIO set low for most cards to work.
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
ULE (Unidirectional Lightweight Encapsulation RFC 4326) decapsulation
code has a bug that allows an attacker to send a malformed ULE packet
with SNDU length of 0 and bring down the receiving machine. This patch
fix the bug and has been tested on version 2.6.17.11. This bug is 100%
reproducible and the modified source code (GPL) used to produce this bug
will be posted on http://nrg.cs.usm.my/downloads.htm shortly. The
kernel will produce a dump during CRC32 checking on faulty ULE packet.
Signed-off-by: Ang Way Chuang <wcang@nrg.cs.usm.my>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
This patch fixes RTNLGRP_IPV6_IFINFO netlink notifications. Issue
pointed out by Patrick McHardy <kaber@trash.net>.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
When found, it is obvious. nfds calculated when allocating fdsets is
rewritten by calculation of size of fdtable, and when we are unlucky, we
try to free fdsets of wrong size.
Found due to OpenVZ resource management (User Beancounters).
Signed-off-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: Kirill Korotaev <dev@openvz.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
|
|
Keys on Yealink based phones will not function properly when using the
generic HID driver. This patch prevents the generic HID code from
grabbing the device before the regular yealink driver can get a grip on
it.
Signed-off-by: Henk Vergonet <Henk.Vergonet@gmail.com>
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
This patch fixes a memory leak and a kernel oops when trying to unload
the driver, due to an unbalanced cleanup.
Thanks Ivar Jensen for spotting my mistake.
Signed-off-by: Henk Vergonet <henk.vergonet@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
There is a race between call_usermodehelper_keys, __call_usermodehelper
and wait_for_helper. It should only happen if preemption is enabled or
on a virtualized system.
If the cpu is preempted or put to sleep by the hypervisor in
__call_usermodehelper between the creation of the wait_for_helper
thread and the second check on sub_info->wait, the whole execution
of wait_for_helper including the complete call and the continuation
after the wait_for_completion in call_usermodehelper_keys can have
happened before __call_usermodehelper checks sub_info->wait for the
second time. Since sub_info can already have been clobbered,
sub_info->wait could be zero and complete is called a second time
with an invalid argument. This has happened on s390. It took me only
three days to find out ..
Thanks to Arnd Bergmann for his help to spot this bug.
Kenneth Lee also sent the same patch independently.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
This patch fixes a bug in the handling of 'ignore' module parameters of I2C
client drivers.
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
This patch
- works around a bug in the I2C bridge that makes the initialization
of the TDA10046 fail on recent LifeView cards
- puts the AGC output to tristate in sleep mode. This is necessary for
recent hybrid cards that switch the AGC via tristateing.
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Acked-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
Currently, the code in lib/idr.c uses a bare spin_lock(&idp->lock) to do
internal locking. This is a nasty trap for code that might call idr
functions from different contexts; for example, it seems perfectly
reasonable to call idr_get_new() from process context and idr_remove() from
interrupt context -- but with the current locking this would lead to a
potential deadlock.
The simplest fix for this is to just convert the idr locking to use
spin_lock_irqsave().
In particular, this fixes a very complicated locking issue detected by
lockdep, involving the ib_ipoib driver's priv->lock and dev->_xmit_lock,
which get involved with the ib_sa module's query_idr.lock.
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
The pattern is set after trying to compute the prefix table, which tries
to use it. Initialize it before calling compute_prefix_tbl, make
compute_prefix_tbl consistently use only the data from struct ts_bm
and remove the now unnecessary arguments.
Signed-off-by: Michael Rash <mbr@cipherdyne.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Acked-by: David Miller <davem@davemloft.net>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
The via-velocity driver reports incorrect speed and link detected status
as viewed by ethtool (and probably other tools). This patch fixes those
incorrect reports and prettifies a long line.
Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
The patch fixes http://bugzilla.kernel.org/show_bug.cgi?id=6711
Signed-off-by: Roy Marples <uberlord@gentoo.org>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
This patch enables agpgart on a Via "PT880 Ultra" based motherboard
(Asus P4V800D-X). The PCI ID of the PT880 Ultra is 0x0308 instead of
0x0258 of the PT880.
The patched via-agp passes testgart.
Signed-off-by: Magnus Kessler <Magnus.Kessler@gmx.net>
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
From: Julien Tous <julien.tous@gmail.com>
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
Fixes inconsistent use of "uint32_t" vs. "u_int32_t".
Fix pfkeyv2 userspace builds.
Signed-off-by: Tushar Gohad <tgohad@mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
- Set outputs to tristate in sleep mode
- Reduce dangerously high firmware download speed with 16MHz xtal
- added tda827x configuration with GPIOs low
- added comments to stupid looking IIC reads that work around bugs in
the tda10046.
- some minor updates
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
based on drivers/media/common/ir-keymaps.c:ir_codes_flydvb
in Linus' tree.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
There seem to be many variants of this cards with different
feature sets. This entry supports
analog TV, CVBS and s-video input, FM radio and DVB-T
if they are supported by the hardware.
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
The .vmux entry needs to be 1 instead of 0
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
Added ID entries for the Genius VideoWonder DVB-T
and the LifeView FlyTV Platinum Gold
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
The saa7134 drivers uses request_firmware()
and thus needs to select FW_LOADER.
Signed-off-by: maximilian attems <maks@sternwelten.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
The device, Medion 7134, has two saa7134 chips on it, but only one of them
is functional in the current saa7134 driver.
This patch adds autodetection for the second, unsupported saa7134 chip,
as SAA7134_BOARD_MD7134_BRIDGE_2, and displays a message to the user
(in dmesg) indicating that the second chip isn't yet functional.
This is useful for users, since two instances of the saa7134 driver
will spawn. This patch will prevent confusion by warning the user that
only one of the chips on the board are functional.
There are other versions of the SAA7134_BOARD_MD7134 with only a single
saa7134 bridge/decoder -- those devices will not be affected by this patch.
Only devices containing the second chip will display the warning.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
There are already some supported devices that contain two
saa713x chips on-board, where only one of these chips is
currently functional in the driver.
We are already printing a warning message for the second
saa7134 decoder in SAA7134_BOARD_AVERMEDIA_A169_B. This
patch alters that case to make it generic, so that other
cards in the same situation can use it.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
- Added support for AVerMedia A169 Dual Analog tuner card
(dual saa7134 decoders - only 1 working right now)
- Added autodetection for both parts of the card.
It shows up like 2 cards, B1 and B
- Enabled tuner B1, SVIDEO on B1 and composite1 through SVIDEO,
FIXME: B is more or less dead at this point and I suspect the
FM-radio is on the B part of the board
Adrian Bunk:
slightly adapted to 2.6.16
Signed-off-by: Rickard Osser <ricky@osser.se>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
I have the same card with the same PCI id, but from KWorld.
The patch documents that this is the same card.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
- Corrected autodetection for saa7130 card:
subsystem: 1048:226c, board: ELSA EX-VISION 700TV
Signed-off-by: TAMUKI Shoichi <tamuki@linet.gr.jp>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
- Enable the tuv1236 tuner on the Kworld-ATSC110 card so that the
tuner can be identified when tuners.ko loads.
- With this change it is no longer necessary to remove and reload
the tuner module in order to get the tuv1236 identified.
- This code was copied from the ATI HDTV Wonder init routine (in cx88-cards.c)
which also uses the TUV1236D.
Signed-off-by: Curt Meyers <cmeyers@boilerbots.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
- There is no radio with this tuner card...
Thanks-to: Dwaine Garden <DwaineGarden@rogers.com>
- fixed capitalization in card name.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
- corrected composite input.
- verified s-video input.
Signed-off-by: Curt Meyers <cmeyers@boilerbots.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
- When tuning VSB, use ANT input
- When tuning QAM, use CABLE input
Signed-off-by: Curt Meyers <cmeyers@boilerbots.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
Signed-off-by: Andrew Burri <andrew.burri@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
Add support for ELSA EX-VISION 700TV, which is the ELSA Japan's
flagship model of the software encoding TV capture card.
All inputs (Television, Composite1 and S-Video) have been tested.
Signed-off-by: Tamuki Shoichi <tamuki@linet.gr.jp>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
This is an analog / digital hybrid card.
Signed-off-by: Peter Hartshorn <p3r@users.sourceforge.net>
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
Analog and DVB-T are working, Remote not yet.
This card is based on the new LifeView design, there should be many variants.
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
Additionally to the card support, this changeset adds the option
tda10046lifeview to get_dvb_firmware to download tda10046 firmware
from LifeView's site.
Signed-off-by: Giampiero Giancipoli <gianci@libero.it>
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net>
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
|
|
|
|
This prevents bad inode numbers from triggering errors in
ext2_get_inode.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
|
