aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-01-16Linux 3.2.37v3.2.37Ben Hutchings
2013-01-16aoe: do not call bdi_init after blk_alloc_queueEd Cashin
commit 0a41409c518083133e79015092585d68915865be upstream. blk_alloc_queue has already done a bdi_init, so do not bdi_init again in aoeblk_gdalloc. The extra call causes list corruption in the per-CPU backing dev info stats lists. Affected users see console WARNINGs about list_del corruption on percpu_counter_destroy when doing "rmmod aoe" or "aoeflush -a" when AoE targets have been detected and initialized by the system. The patch below applies to v3.6.11, with its v47 aoe driver. It is expected to apply to all currently maintained stable kernels except 3.7.y. A related but different fix has been posted for 3.7.y. References: RedHat bugzilla ticket with original report https://bugzilla.redhat.com/show_bug.cgi?id=853064 LKML discussion of bug and fix http://thread.gmane.org/gmane.linux.kernel/1416336/focus=1416497 Reported-by: Josh Boyer <jwboyer@redhat.com> Signed-off-by: Ed Cashin <ecashin@coraid.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16ACPI : do not use Lid and Sleep button for S5 wakeupZhang Rui
commit b7e383046c2c7c13ad928cd7407eafff758ddd4b upstream. When system enters power off, the _PSW of Lid device is enabled. But this may cause the system to reboot instead of power off. A proper way to fix this is to always disable lid wakeup capability for S5. References: https://bugzilla.kernel.org/show_bug.cgi?id=35262 Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16RDMA/nes: Fix for terminate timer crashTatyana Nikolova
commit 7bfcfa51c35cdd2d37e0d70fc11790642dd11fb3 upstream. The terminate timer needs to be initialized just once. Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16RDMA/nes: Fix for crash when registering zero length MR for CQTatyana Nikolova
commit 7d9c199a55200c9b9fcad08e150470d02fb385be upstream. Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16mvsas: Fix oops when ata commond timeout.Jianpeng Ma
commit 95ab000388974d8ffef8257306b4be6e8778b768 upstream. Kernel message follows: [ 511.712011] sd 11:0:0:0: [sdf] command ffff8800a4e81400 timed out [ 511.712022] sas: Enter sas_scsi_recover_host busy: 1 failed: 1 [ 511.712024] sas: trying to find task 0xffff8800a4d24c80 [ 511.712026] sas: sas_scsi_find_task: aborting task 0xffff8800a4d24c80 [ 511.712029] drivers/scsi/mvsas/mv_sas.c 1631:mvs_abort_task() mvi=ffff8800b5300000 task=ffff8800a4d24c80 slot=ffff8800b5325038 slot_idx=x0 [ 511.712035] BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 [ 511.712040] IP: [<ffffffff815f8c0c>] _raw_spin_lock_irqsave+0xc/0x30 [ 511.712047] PGD 0 [ 511.712049] Oops: 0002 [#1] SMP [ 511.712052] Modules linked in: mvsas libsas scsi_transport_sas raid456 async_pq async_xor xor async_memcpy async_raid6_recov raid6_pq async_tx [last unloaded: mvsas] [ 511.712062] CPU 3 [ 511.712066] Pid: 7322, comm: scsi_eh_11 Not tainted 3.5.0+ #106 To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M. [ 511.712068] RIP: 0010:[<ffffffff815f8c0c>] [<ffffffff815f8c0c>] _raw_spin_lock_irqsave+0xc/0x30 [ 511.712073] RSP: 0018:ffff880098d3bcb0 EFLAGS: 00010086 [ 511.712074] RAX: 0000000000000286 RBX: 0000000000000058 RCX: 00000000000000c3 [ 511.712076] RDX: 0000000000000100 RSI: 0000000000000046 RDI: 0000000000000058 [ 511.712078] RBP: ffff880098d3bcb0 R08: 000000000000000a R09: 0000000000000000 [ 511.712080] R10: 00000000000004e8 R11: 00000000000004e7 R12: ffff8800a4d24c80 [ 511.712082] R13: 0000000000000050 R14: ffff8800b5325038 R15: ffff8800a4eafe00 [ 511.712084] FS: 0000000000000000(0000) GS:ffff8800bdb80000(0000) knlGS:0000000000000000 [ 511.712086] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 511.712088] CR2: 0000000000000058 CR3: 00000000a4ce6000 CR4: 00000000000407e0 [ 511.712090] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 511.712091] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 511.712093] Process scsi_eh_11 (pid: 7322, threadinfo ffff880098d3a000, task ffff8800a61dde40) [ 511.712095] Stack: [ 511.712096] ffff880098d3bce0 ffffffff81060683 ffff880000000000 0000000000000000 [ 511.712099] ffff8800a4d24c80 ffff8800b5300000 ffff880098d3bcf0 ffffffffa0076a88 [ 511.712102] ffff880098d3bd50 ffffffffa0079bb5 ffff880000000000 ffff880000000018 [ 511.712106] Call Trace: [ 511.712110] [<ffffffff81060683>] complete+0x23/0x60 [ 511.712115] [<ffffffffa0076a88>] mvs_tmf_timedout+0x18/0x20 [mvsas] [ 511.712119] [<ffffffffa0079bb5>] mvs_slot_complete+0x765/0x7d0 [mvsas] [ 511.712125] [<ffffffffa005a17d>] sas_scsi_recover_host+0x55d/0xdb0 [libsas] [ 511.712128] [<ffffffff8106d600>] ? idle_balance+0xe0/0x130 [ 511.712133] [<ffffffff813b150c>] scsi_error_handler+0xcc/0x470 [ 511.712136] [<ffffffff815f7ad0>] ? __schedule+0x370/0x730 [ 511.712139] [<ffffffff8105f728>] ? __wake_up_common+0x58/0x90 [ 511.712142] [<ffffffff813b1440>] ? scsi_eh_get_sense+0x110/0x110 [ 511.712146] [<ffffffff810571be>] kthread+0x8e/0xa0 [ 511.712150] [<ffffffff816015f4>] kernel_thread_helper+0x4/0x10 [ 511.712153] [<ffffffff81057130>] ? flush_kthread_work+0x120/0x120 [ 511.712156] [<ffffffff816015f0>] ? gs_change+0xb/0xb [ 511.712157] Code: 8a 00 01 00 00 89 d0 f0 66 0f b1 0f 66 39 d0 0f 94 c0 0f b6 c0 5d c3 0f 1f 84 00 00 00 00 00 55 48 89 e5 9c 58 fa ba 00 01 00 00 <f0> 66 0f c1 17 0f b6 ce 38 d1 74 11 0f 1f 84 00 00 00 00 00 f3 [ 511.712191] RIP [<ffffffff815f8c0c>] _raw_spin_lock_irqsave+0xc/0x30 [ 511.712194] RSP <ffff880098d3bcb0> [ 511.712196] CR2: 0000000000000058 [ 511.712198] ---[ end trace a781c7b1e65db92c ]--- Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16tcp: RFC 5961 5.2 Blind Data Injection Attack MitigationEric Dumazet
[ Upstream commit 354e4aa391ed50a4d827ff6fc11e0667d0859b25 ] RFC 5961 5.2 [Blind Data Injection Attack].[Mitigation] All TCP stacks MAY implement the following mitigation. TCP stacks that implement this mitigation MUST add an additional input check to any incoming segment. The ACK value is considered acceptable only if it is in the range of ((SND.UNA - MAX.SND.WND) <= SEG.ACK <= SND.NXT). All incoming segments whose ACK value doesn't satisfy the above condition MUST be discarded and an ACK sent back. Move tcp_send_challenge_ack() before tcp_ack() to avoid a forward declaration. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Jerry Chu <hkchu@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16tcp: tcp_replace_ts_recent() should not be called from tcp_validate_incoming()Eric Dumazet
[ Upstream commit bd090dfc634ddd711a5fbd0cadc6e0ab4977bcaf ] We added support for RFC 5961 in latest kernels but TCP fails to perform exhaustive check of ACK sequence. We can update our view of peer tsval from a frame that is later discarded by tcp_ack() This makes timestamps enabled sessions vulnerable to injection of a high tsval : peers start an ACK storm, since the victim sends a dupack each time it receives an ACK from the other peer. As tcp_validate_incoming() is called before tcp_ack(), we should not peform tcp_replace_ts_recent() from it, and let callers do it at the right time. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Nandita Dukkipati <nanditad@google.com> Cc: H.K. Jerry Chu <hkchu@google.com> Cc: Romain Francoise <romain@orebokech.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16tcp: refine SYN handling in tcp_validate_incomingEric Dumazet
[ Upstream commit e371589917011efe6ff8c7dfb4e9e81934ac5855 ] Followup of commit 0c24604b68fc (tcp: implement RFC 5961 4.2) As reported by Vijay Subramanian, we should send a challenge ACK instead of a dup ack if a SYN flag is set on a packet received out of window. This permits the ratelimiting to work as intended, and to increase correct SNMP counters. Suggested-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Vijay Subramanian <subramanian.vijay@gmail.com> Cc: Kiran Kumar Kella <kkiran@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16tcp: implement RFC 5961 4.2Eric Dumazet
[ Upstream commit 0c24604b68fc7810d429d6c3657b6f148270e528 ] Implement the RFC 5691 mitigation against Blind Reset attack using SYN bit. Section 4.2 of RFC 5961 advises to send a Challenge ACK and drop incoming packet, instead of resetting the session. Add a new SNMP counter to count number of challenge acks sent in response to SYN packets. (netstat -s | grep TCPSYNChallenge) Remove obsolete TCPAbortOnSyn, since we no longer abort a TCP session because of a SYN flag. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Kiran Kumar Kella <kkiran@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16tcp: implement RFC 5961 3.2Eric Dumazet
[ Upstream commit 282f23c6ee343126156dd41218b22ece96d747e3 ] Implement the RFC 5691 mitigation against Blind Reset attack using RST bit. Idea is to validate incoming RST sequence, to match RCV.NXT value, instead of previouly accepted window : (RCV.NXT <= SEG.SEQ < RCV.NXT+RCV.WND) If sequence is in window but not an exact match, send a "challenge ACK", so that the other part can resend an RST with the appropriate sequence. Add a new sysctl, tcp_challenge_ack_limit, to limit number of challenge ACK sent per second. Add a new SNMP counter to count number of challenge acks sent. (netstat -s | grep TCPChallengeACK) Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Kiran Kumar Kella <kkiran@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16net: sched: integer overflow fixStefan Hasko
[ Upstream commit d2fe85da52e89b8012ffad010ef352a964725d5f ] Fixed integer overflow in function htb_dequeue Signed-off-by: Stefan Hasko <hasko.stevo@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16inet: Fix kmemleak in tcp_v4/6_syn_recv_sock and dccp_v4/6_request_recv_sockChristoph Paasch
[ Upstream commit e337e24d6624e74a558aa69071e112a65f7b5758 ] If in either of the above functions inet_csk_route_child_sock() or __inet_inherit_port() fails, the newsk will not be freed: unreferenced object 0xffff88022e8a92c0 (size 1592): comm "softirq", pid 0, jiffies 4294946244 (age 726.160s) hex dump (first 32 bytes): 0a 01 01 01 0a 01 01 02 00 00 00 00 a7 cc 16 00 ................ 02 00 03 01 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff8153d190>] kmemleak_alloc+0x21/0x3e [<ffffffff810ab3e7>] kmem_cache_alloc+0xb5/0xc5 [<ffffffff8149b65b>] sk_prot_alloc.isra.53+0x2b/0xcd [<ffffffff8149b784>] sk_clone_lock+0x16/0x21e [<ffffffff814d711a>] inet_csk_clone_lock+0x10/0x7b [<ffffffff814ebbc3>] tcp_create_openreq_child+0x21/0x481 [<ffffffff814e8fa5>] tcp_v4_syn_recv_sock+0x3a/0x23b [<ffffffff814ec5ba>] tcp_check_req+0x29f/0x416 [<ffffffff814e8e10>] tcp_v4_do_rcv+0x161/0x2bc [<ffffffff814eb917>] tcp_v4_rcv+0x6c9/0x701 [<ffffffff814cea9f>] ip_local_deliver_finish+0x70/0xc4 [<ffffffff814cec20>] ip_local_deliver+0x4e/0x7f [<ffffffff814ce9f8>] ip_rcv_finish+0x1fc/0x233 [<ffffffff814cee68>] ip_rcv+0x217/0x267 [<ffffffff814a7bbe>] __netif_receive_skb+0x49e/0x553 [<ffffffff814a7cc3>] netif_receive_skb+0x50/0x82 This happens, because sk_clone_lock initializes sk_refcnt to 2, and thus a single sock_put() is not enough to free the memory. Additionally, things like xfrm, memcg, cookie_values,... may have been initialized. We have to free them properly. This is fixed by forcing a call to tcp_done(), ending up in inet_csk_destroy_sock, doing the final sock_put(). tcp_done() is necessary, because it ends up doing all the cleanup on xfrm, memcg, cookie_values, xfrm,... Before calling tcp_done, we have to set the socket to SOCK_DEAD, to force it entering inet_csk_destroy_sock. To avoid the warning in inet_csk_destroy_sock, inet_num has to be set to 0. As inet_csk_destroy_sock does a dec on orphan_count, we first have to increase it. Calling tcp_done() allows us to remove the calls to tcp_clear_xmit_timer() and tcp_cleanup_congestion_control(). A similar approach is taken for dccp by calling dccp_done(). This is in the kernel since 093d282321 (tproxy: fix hash locking issue when using port redirection in __inet_inherit_port()), thus since version >= 2.6.37. Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16sparc: huge_ptep_set_* functions need to call set_huge_pte_at()Dave Kleikamp
[ Upstream commit 6cb9c3697585c47977c42c5cc1b9fc49247ac530 ] Modifying the huge pte's requires that all the underlying pte's be modified. Version 2: added missing flush_tlb_page() Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16ftrace: Do not function trace inlined functionsSteven Rostedt
commit 45959ee7aa645815a5ce303a0ea1e48a21e67c6a upstream. When gcc inlines a function, it does not mark it with the mcount prologue, which in turn means that inlined functions are not traced by the function tracer. But if CONFIG_OPTIMIZE_INLINING is set, then gcc is allowed not to inline a function that is marked inline. Depending on the options and the compiler, a function may or may not be traced by the function tracer, depending on whether gcc decides to inline a function or not. This has caused several problems in the pass becaues gcc is not always consistent with what it decides to inline between different gcc versions. Some places should not be traced (like paravirt native_* functions) and these are mostly marked as inline. When gcc decides not to inline the function, and if that function should not be traced, then the ftrace function tracer will suddenly break when it use to work fine. This becomes even harder to debug when different versions of gcc will not inline that function, making the same kernel and config work for some gcc versions and not work for others. By making all functions marked inline to not be traced will remove the ambiguity that gcc adds when it comes to tracing functions marked inline. All gcc versions will be consistent with what functions are traced and having volatile working code will be removed. Note, only the inline macro when CONFIG_OPTIMIZE_INLINING is set needs to have notrace added, as the attribute __always_inline will force the function to be inlined and then not traced. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16Revert: "rt2x00: Don't let mac80211 send a BAR when an AMPDU subframe fails"Stanislaw Gruszka
commit ab9d6e4ffe192427ce9e93d4f927b0faaa8a941e upstream. This revert: commit be03d4a45c09ee5100d3aaaedd087f19bc20d01f Author: Andreas Hartmann <andihartmann@01019freenet.de> Date: Tue Apr 17 00:25:28 2012 +0200 rt2x00: Don't let mac80211 send a BAR when an AMPDU subframe fails To fix problem workaround by above commit use IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL flag (see change log for "mac80211: introduce IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL" patch). Resolve: https://bugzilla.kernel.org/show_bug.cgi?id=42828 Bisected-by: Francisco Pina Martins <f.pinamartins@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16mac80211: introduce IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAILStanislaw Gruszka
commit 5b632fe85ec82e5c43740b52e74c66df50a37db3 upstream. Commit f0425beda4d404a6e751439b562100b902ba9c98 "mac80211: retry sending failed BAR frames later instead of tearing down aggr" caused regression on rt2x00 hardware (connection hangs). This regression was fixed by commit be03d4a45c09ee5100d3aaaedd087f19bc20d01 "rt2x00: Don't let mac80211 send a BAR when an AMPDU subframe fails". But the latter commit caused yet another problem reported in https://bugzilla.kernel.org/show_bug.cgi?id=42828#c22 After long discussion in this thread: http://mid.gmane.org/20121018075615.GA18212@redhat.com and testing various alternative solutions, which failed on one or other setup, we have no other good fix for the issues like just revert both mentioned earlier commits. To do not affect other hardware which benefit from commit f0425beda4d404a6e751439b562100b902ba9c98, instead of reverting it, introduce flag that when used will restore mac80211 behaviour before the commit. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> [replaced link with mid.gmane.org that has message-id] Signed-off-by: Johannes Berg <johannes.berg@intel.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16rt2x00: Don't let mac80211 send a BAR when an AMPDU subframe failsAndreas Hartmann
commit be03d4a45c09ee5100d3aaaedd087f19bc20d01f upstream. There are connection stalls or very poor throughputs with rt2800 hardware using 802.11n in AP mode since patch "mac80211: retry sending failed BAR frames later instead of tearing down aggr"[1][2]. Since rt2800 hardware is not able to correctly report the tx status of BAR frames, this patch removes as workaround the existing error handling on AP side, which lets mac80211 send a BAR when an AMPDU subframe fails. As a result, most wifi clients (aside from Intel STAs on Windows) instead will timeout now the reorder buffer and request the lost frame again. The correct solution would be, to tear down BA session on AP side. This patch was born on the basis of "[RFT] rt2x00: Tear down BA session on QoS frame failure"[3]. Thanks to Helmut Schaa for his support! [1] http://thread.gmane.org/gmane.linux.kernel.wireless.general/83297/focus=83304 [2] http://git.kernel.org/?p=linux/kernel/git/linville/wireless-testing.git;a=commit;h=f0425beda4d404a6e751439b562100b902ba9c98 [3] http://thread.gmane.org/gmane.linux.drivers.rt2x00.user/569 Signed-off-by: Andreas Hartmann <andihartmann@01019freenet.de> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16epoll: prevent missed events on EPOLL_CTL_MODEric Wong
commit 128dd1759d96ad36c379240f8b9463e8acfd37a1 upstream. EPOLL_CTL_MOD sets the interest mask before calling f_op->poll() to ensure events are not missed. Since the modifications to the interest mask are not protected by the same lock as ep_poll_callback, we need to ensure the change is visible to other CPUs calling ep_poll_callback. We also need to ensure f_op->poll() has an up-to-date view of past events which occured before we modified the interest mask. So this barrier also pairs with the barrier in wq_has_sleeper(). This should guarantee either ep_poll_callback or f_op->poll() (or both) will notice the readiness of a recently-ready/modified item. This issue was encountered by Andreas Voellmy and Junchang(Jason) Wang in: http://thread.gmane.org/gmane.linux.kernel/1408782/ Signed-off-by: Eric Wong <normalperson@yhbt.net> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andreas Voellmy <andreas.voellmy@yale.edu> Tested-by: "Junchang(Jason) Wang" <junchang.wang@yale.edu> Cc: netdev@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16udf: don't increment lenExtents while writing to a holeNamjae Jeon
commit fb719c59bdb4fca86ee1fd1f42ab3735ca12b6b2 upstream. Incrementing lenExtents even while writing to a hole is bad for performance as calls to udf_discard_prealloc and udf_truncate_tail_extent would not return from start if isize != lenExtents Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16drivers/rtc/rtc-vt8500.c: fix handling of data passed in struct rtc_timeTony Prisk
commit 2f90b68309683f2c5765a1b04ca23d71e51f1494 upstream. tm_mon is 0..11, whereas vt8500 expects 1..12 for the month field, causing invalid date errors for January, and causing the day field to roll over incorrectly. The century flag is only handled in vt8500_rtc_read_time, but not set in vt8500_rtc_set_time. This patch corrects the behaviour of the century flag. Signed-off-by: Edgar Toernig <froese@gmx.de> Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16drivers/rtc/rtc-vt8500.c: correct handling of CR_24H bitfieldTony Prisk
commit 532db570e5181abc8f4f7bfa6c77c69ec2240198 upstream. Control register bitfield for 12H/24H mode is handled incorrectly. Setting CR_24H actually enables 12H mode. This patch renames the define and changes the initialization code to correctly set 24H mode. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Cc: Edgar Toernig <froese@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16mm: limit mmu_gather batching to fix soft lockups on !CONFIG_PREEMPTMichal Hocko
commit 53a59fc67f97374758e63a9c785891ec62324c81 upstream. Since commit e303297e6c3a ("mm: extended batches for generic mmu_gather") we are batching pages to be freed until either tlb_next_batch cannot allocate a new batch or we are done. This works just fine most of the time but we can get in troubles with non-preemptible kernel (CONFIG_PREEMPT_NONE or CONFIG_PREEMPT_VOLUNTARY) on large machines where too aggressive batching might lead to soft lockups during process exit path (exit_mmap) because there are no scheduling points down the free_pages_and_swap_cache path and so the freeing can take long enough to trigger the soft lockup. The lockup is harmless except when the system is setup to panic on softlockup which is not that unusual. The simplest way to work around this issue is to limit the maximum number of batches in a single mmu_gather. 10k of collected pages should be safe to prevent from soft lockups (we would have 2ms for one) even if they are all freed without an explicit scheduling point. This patch doesn't add any new explicit scheduling points because it relies on zap_pmd_range during page tables zapping which calls cond_resched per PMD. The following lockup has been reported for 3.0 kernel with a huge process (in order of hundreds gigs but I do know any more details). BUG: soft lockup - CPU#56 stuck for 22s! [kernel:31053] Modules linked in: af_packet nfs lockd fscache auth_rpcgss nfs_acl sunrpc mptctl mptbase autofs4 binfmt_misc dm_round_robin dm_multipath bonding cpufreq_conservative cpufreq_userspace cpufreq_powersave pcc_cpufreq mperf microcode fuse loop osst sg sd_mod crc_t10dif st qla2xxx scsi_transport_fc scsi_tgt netxen_nic i7core_edac iTCO_wdt joydev e1000e serio_raw pcspkr edac_core iTCO_vendor_support acpi_power_meter rtc_cmos hpwdt hpilo button container usbhid hid dm_mirror dm_region_hash dm_log linear uhci_hcd ehci_hcd usbcore usb_common scsi_dh_emc scsi_dh_alua scsi_dh_hp_sw scsi_dh_rdac scsi_dh dm_snapshot pcnet32 mii edd dm_mod raid1 ext3 mbcache jbd fan thermal processor thermal_sys hwmon cciss scsi_mod Supported: Yes CPU 56 Pid: 31053, comm: kernel Not tainted 3.0.31-0.9-default #1 HP ProLiant DL580 G7 RIP: 0010: _raw_spin_unlock_irqrestore+0x8/0x10 RSP: 0018:ffff883ec1037af0 EFLAGS: 00000206 RAX: 0000000000000e00 RBX: ffffea01a0817e28 RCX: ffff88803ffd9e80 RDX: 0000000000000200 RSI: 0000000000000206 RDI: 0000000000000206 RBP: 0000000000000002 R08: 0000000000000001 R09: ffff887ec724a400 R10: 0000000000000000 R11: dead000000200200 R12: ffffffff8144c26e R13: 0000000000000030 R14: 0000000000000297 R15: 000000000000000e FS: 00007ed834282700(0000) GS:ffff88c03f200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 000000000068b240 CR3: 0000003ec13c5000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process kernel (pid: 31053, threadinfo ffff883ec1036000, task ffff883ebd5d4100) Call Trace: release_pages+0xc5/0x260 free_pages_and_swap_cache+0x9d/0xc0 tlb_flush_mmu+0x5c/0x80 tlb_finish_mmu+0xe/0x50 exit_mmap+0xbd/0x120 mmput+0x49/0x120 exit_mm+0x122/0x160 do_exit+0x17a/0x430 do_group_exit+0x3d/0xb0 get_signal_to_deliver+0x247/0x480 do_signal+0x71/0x1b0 do_notify_resume+0x98/0xb0 int_signal+0x12/0x17 DWARF2 unwinder stuck at int_signal+0x12/0x17 Signed-off-by: Michal Hocko <mhocko@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16ACPI / scan: Do not use dummy HID for system bus ACPI nodesRafael J. Wysocki
commit 4f5f64cf0cc916220aaa055992e31195470cfe37 upstream. At one point acpi_device_set_id() checks if acpi_device_hid(device) returns NULL, but that never happens, so system bus devices with an empty list of PNP IDs are given the dummy HID ("device") instead of the "system bus HID" ("LNXSYBUS"). Fix the code to use the right check. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16SUNRPC: Ensure that we free the rpc_task after cleanups are doneTrond Myklebust
commit c6567ed1402c55e19b012e66a8398baec2a726f3 upstream. This patch ensures that we free the rpc_task after the cleanup callbacks are done in order to avoid a deadlock problem that can be triggered if the callback needs to wait for another workqueue item to complete. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Weston Andros Adamson <dros@netapp.com> Cc: Tejun Heo <tj@kernel.org> Cc: Bruce Fields <bfields@fieldses.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16nfs: fix null checking in nfs_get_option_str()Xi Wang
commit e25fbe380c4e3c09afa98bcdcd9d3921443adab8 upstream. The following null pointer check is broken. *option = match_strdup(args); return !option; The pointer `option' must be non-null, and thus `!option' is always false. Use `!*option' instead. The bug was introduced in commit c5cb09b6f8 ("Cleanup: Factor out some cut-and-paste code."). Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16video: mxsfb: fix crash when unblanking the displayLothar Waßmann
commit 6c1ecba8d84841277d68140ef485335d5be28485 upstream. The VDCTRL4 register does not provide the MXS SET/CLR/TOGGLE feature. The write in mxsfb_disable_controller() sets the data_cnt for the LCD DMA to 0 which obviously means the max. count for the LCD DMA and leads to overwriting arbitrary memory when the display is unblanked. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Acked-by: Juergen Beisert <jbe@pengutronix.de> Tested-by: Lauri Hintsala <lauri.hintsala@bluegiga.net> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16drm/nouveau: fix init with agpgart-uninorthAaro Koskinen
commit eda85d6ad490923152544fba0473798b6cc0edf6 upstream. Check that the AGP aperture can be mapped. This follows a similar change done for Radeon (commit 365048ff, drm/radeon: AGP memory is only I/O if the aperture can be mapped by the CPU.). The patch fixes the following error seen on G5 iMac: nouveau E[ DRM] failed to create kernel channel, -12 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=58806 Reviewed-by: Michel Dänzer <michel@daenzer.net> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Dave Airlie <airlied@redhat.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16drm/radeon: Properly handle DDC probe for DP bridgesNiels Ole Salscheider
commit 0a9069d34918659bc8a89e21e69e60b2b83291a3 upstream. DDC information can be accessed using AUX CH Fixes failure to probe monitors on some systems with DP bridge chips. agd5f: minor fixes Signed-off-by: Niels Ole Salscheider <niels_ole@salscheider-online.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16drm/radeon: add connector table for Mac G4 SilverAlex Deucher
commit cafa59b9011a7790be4ddd5979419259844a165d upstream. Apple cards do not provide data tables in the vbios so we have to hard code the connector parameters in the driver. Reported-by: Albrecht Dreß <albrecht.dress@arcor.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16drm/radeon: add connector table for SAM440ep embedded boardAlex Deucher
commit 6a556039e7823d27a0a7f7724d4d455053ea9253 upstream. RV250 found on ppc embedded boards. Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16powerpc: Add missing NULL terminator to avoid boot panic on PPC40xGabor Juhos
commit e6449c9b2d90c1bd9a5985bf05ddebfd1631cd6b upstream. The missing NULL terminator can cause a panic on PPC405 boards during boot: Linux/PowerPC load: console=ttyS0,115200 root=/dev/mtdblock1 rootfstype=squashfs,jffs2 noinitrd init=/etc/preinit Finalizing device tree... flat tree at 0x6a5160 bootconsole [udbg0] enabled Page fault in user mode with in_atomic() = 1 mm = (null) NIP = c0275f50 MSR = fffffffe Oops: Weird page fault, sig: 11 [#1] PowerPC 40x Platform Modules linked in: NIP: c0275f50 LR: c0275f60 CTR: c0280000 REGS: c0275eb0 TRAP: 636f7265 Not tainted (3.7.1) MSR: fffffffe <VEC,VSX,EE,PR,FP,ME,SE,BE,IR,DR,PMM,RI> CR: c06a6190 XER: 00000001 TASK = c02662a8[0] 'swapper' THREAD: c0274000 GPR00: c0275ec0 c000c658 c027c4bf 00000000 c0275ee0 c000a0ec c020a1a8 c020a1f0 GPR08: c020f631 c020f404 c025f078 c025f080 c0275f10 Call Trace: ---[ end trace 31fd0ba7d8756001 ]--- Kernel panic - not syncing: Attempted to kill the idle task! The panic happens since commit 9597abe00c1bab2aedce6b49866bf6d1e81c9eed (sections: fix section conflicts in arch/powerpc), however the root cause of this is that the NULL terminator were not added in commit a4f740cf33f7f6c164bbde3c0cdbcc77b0c4997c (of/flattree: Add of_flat_dt_match() helper function). Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16powerpc/vdso: Remove redundant locking in update_vsyscall_tz()Shan Hai
commit ce73ec6db47af84d1466402781ae0872a9e7873c upstream. The locking in update_vsyscall_tz() is not only unnecessary because the vdso code copies the data unproteced in __kernel_gettimeofday() but also introduces a hard to reproduce race condition between update_vsyscall() and update_vsyscall_tz(), which causes user space process to loop forever in vdso code. The following patch removes the locking from update_vsyscall_tz(). Locking is not only unnecessary because the vdso code copies the data unprotected in __kernel_gettimeofday() but also erroneous because updating the tb_update_count is not atomic and introduces a hard to reproduce race condition between update_vsyscall() and update_vsyscall_tz(), which further causes user space process to loop forever in vdso code. The below scenario describes the race condition, x==0 Boot CPU other CPU proc_P: x==0 timer interrupt update_vsyscall x==1 x++;sync settimeofday update_vsyscall_tz x==2 x++;sync x==3 sync;x++ sync;x++ proc_P: x==3 (loops until x becomes even) Because the ++ operator would be implemented as three instructions and not atomic on powerpc. A similar change was made for x86 in commit 6c260d58634 ("x86: vdso: Remove bogus locking in update_vsyscall_tz") Signed-off-by: Shan Hai <shan.hai@windriver.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16p54usb: add USBIDs for two more p54usb devicesChristian Lamparter
commit 4010fe21a315b4223c25376714c6a2b61b722e5c upstream. This patch adds USBIDs for: - DrayTek Vigor 530 - Zoom 4410a It also adds a note about Gemtek WUBI-100GW and SparkLAN WL-682 USBID conflict [WUBI-100GW is a ISL3886+NET2280 (LM86 firmare) solution, whereas WL-682 is a ISL3887 (LM87 firmware)] device. Source: <http://www.wikidevi.com/wiki/Intersil/p54/usb/windows> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16ath9k_hw: Fix RX gain initvals for AR9485Sujith Manoharan
commit a796a1dd5da9645ad77aa687d1a890ecd63ab5a6 upstream. Populate iniModesRxGain with the correct initvals array for AR9485 v1.1 Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> [bwh: Backported to 3.2: - Adjust context - INIT_INI_ARRAY takes additional size and columns arguments] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16p54usb: add USB ID for T-Com Sinus 154 data IITomasz Guszkowski
commit 3194b7fcdf6caea338b5d2c72d76fed80437649c upstream. Added USB ID for T-Com Sinus 154 data II. Signed-off-by: Tomasz Guszkowski <tsg@o2.pl> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16tmpfs mempolicy: fix /proc/mounts corrupting memoryHugh Dickins
commit f2a07f40dbc603c15f8b06e6ec7f768af67b424f upstream. Recently I suggested using "mount -o remount,mpol=local /tmp" in NUMA mempolicy testing. Very nasty. Reading /proc/mounts, /proc/pid/mounts or /proc/pid/mountinfo may then corrupt one bit of kernel memory, often in a page table (causing "Bad swap" or "Bad page map" warning or "Bad pagetable" oops), sometimes in a vm_area_struct or rbnode or somewhere worse. "mpol=prefer" and "mpol=prefer:Node" are equally toxic. Recent NUMA enhancements are not to blame: this dates back to 2.6.35, when commit e17f74af351c "mempolicy: don't call mpol_set_nodemask() when no_context" skipped mpol_parse_str()'s call to mpol_set_nodemask(), which used to initialize v.preferred_node, or set MPOL_F_LOCAL in flags. With slab poisoning, you can then rely on mpol_to_str() to set the bit for node 0x6b6b, probably in the next page above the caller's stack. mpol_parse_str() is only called from shmem_parse_options(): no_context is always true, so call it unused for now, and remove !no_context code. Set v.nodes or v.preferred_node or MPOL_F_LOCAL as mpol_to_str() might expect. Then mpol_to_str() can ignore its no_context argument also, the mpol being appropriately initialized whether contextualized or not. Rename its no_context unused too, and let subsequent patch remove them (that's not needed for stable backporting, which would involve rejects). I don't understand why MPOL_LOCAL is described as a pseudo-policy: it's a reasonable policy which suffers from a confusing implementation in terms of MPOL_PREFERRED with MPOL_F_LOCAL. I believe this would be much more robust if MPOL_LOCAL were recognized in switch statements throughout, MPOL_F_LOCAL deleted, and MPOL_PREFERRED use the (possibly empty) nodes mask like everyone else, instead of its preferred_node variant (I presume an optimization from the days before MPOL_LOCAL). But that would take me too long to get right and fully tested. Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16cifs: adjust sequence number downward after signing NT_CANCEL requestJeff Layton
commit 31efee60f489c759c341454d755a9fd13de8c03d upstream. When a call goes out, the signing code adjusts the sequence number upward by two to account for the request and the response. An NT_CANCEL however doesn't get a response of its own, it just hurries the server along to get it to respond to the original request more quickly. Therefore, we must adjust the sequence number back down by one after signing a NT_CANCEL request. Reported-by: Tim Perry <tdparmor-sambabugs@yahoo.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com> [bwh: Backported to 3.2: adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16mm: Fix PageHead when !CONFIG_PAGEFLAGS_EXTENDEDChristoffer Dall
commit ad4b3fb7ff9940bcdb1e4cd62bd189d10fa636ba upstream. Unfortunately with !CONFIG_PAGEFLAGS_EXTENDED, (!PageHead) is false, and (PageHead) is true, for tail pages. If this is indeed the intended behavior, which I doubt because it breaks cache cleaning on some ARM systems, then the nomenclature is highly problematic. This patch makes sure PageHead is only true for head pages and PageTail is only true for tail pages, and neither is true for non-compound pages. [ This buglet seems ancient - seems to have been introduced back in Apr 2008 in commit 6a1e7f777f61: "pageflags: convert to the use of new macros". And the reason nobody noticed is because the PageHead() tests are almost all about just sanity-checking, and only used on pages that are actual page heads. The fact that the old code returned true for tail pages too was thus not really noticeable. - Linus ] Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu> Acked-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Will Deacon <Will.Deacon@arm.com> Cc: Steve Capper <Steve.Capper@arm.com> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16PCI: Reduce Ricoh 0xe822 SD card reader base clock frequency to 50MHzAndy Lutomirski
commit 812089e01b9f65f90fc8fc670d8cce72a0e01fbb upstream. Otherwise it fails like this on cards like the Transcend 16GB SDHC card: mmc0: new SDHC card at address b368 mmcblk0: mmc0:b368 SDC 15.0 GiB mmcblk0: error -110 sending status command, retrying mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb0 Tested on my Lenovo x200 laptop. [bhelgaas: changelog] Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Chris Ball <cjb@laptop.org> CC: Manoj Iyer <manoj.iyer@canonical.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16ext4: do not try to write superblock on ro remount w/o journalMichael Tokarev
commit d096ad0f79a782935d2e06ae8fb235e8c5397775 upstream. When a journal-less ext4 filesystem is mounted on a read-only block device (blockdev --setro will do), each remount (for other, unrelated, flags, like suid=>nosuid etc) results in a series of scary messages from kernel telling about I/O errors on the device. This is becauese of the following code ext4_remount(): if (sbi->s_journal == NULL) ext4_commit_super(sb, 1); at the end of remount procedure, which forces writing (flushing) of a superblock regardless whenever it is dirty or not, if the filesystem is readonly or not, and whenever the device itself is readonly or not. We only need call ext4_commit_super when the file system had been previously mounted read/write. Thanks to Eric Sandeen for help in diagnosing this issue. Signed-off-By: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16hwmon: (lm73} Detect and report i2c bus errorsChris Verges
commit 0602934f302e016e2ea5dc6951681bfac77455ef upstream. If an LM73 device does not exist on an I2C bus, attempts to communicate with the device result in an error code returned from the i2c read/write functions. The current lm73 driver casts that return value from a s32 type to a s16 type, then converts it to a temperature in celsius. Because negative temperatures are valid, it is difficult to distinguish between an error code printed to the response buffer and a negative temperature recorded by the sensor. The solution is to evaluate the return value from the i2c functions before performing any temperature calculations. If the i2c function did not succeed, the error code should be passed back through the virtual file system layer instead of being printed into the response buffer. Before: $ cat /sys/class/hwmon/hwmon0/device/temp1_input -46 After: $ cat /sys/class/hwmon/hwmon0/device/temp1_input cat: read error: No such device or address Signed-off-by: Chris Verges <kg4ysn@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16jbd2: fix assertion failure in jbd2_journal_flush()Jan Kara
commit d7961c7fa4d2e3c3f12be67e21ba8799b5a7238a upstream. The following race is possible between start_this_handle() and someone calling jbd2_journal_flush(). Process A Process B start_this_handle(). if (journal->j_barrier_count) # false if (!journal->j_running_transaction) { #true read_unlock(&journal->j_state_lock); jbd2_journal_lock_updates() jbd2_journal_flush() write_lock(&journal->j_state_lock); if (journal->j_running_transaction) { # false ... wait for committing trans ... write_unlock(&journal->j_state_lock); ... write_lock(&journal->j_state_lock); if (!journal->j_running_transaction) { # true jbd2_get_transaction(journal, new_transaction); write_unlock(&journal->j_state_lock); goto repeat; # eventually blocks on j_barrier_count > 0 ... J_ASSERT(!journal->j_running_transaction); # fails We fix the race by rechecking j_barrier_count after reacquiring j_state_lock in exclusive mode. Reported-by: yjwsignal@empal.com Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16ext4: check dioread_nolock on remountJan Kara
commit 261cb20cb2f0737a247aaf08dff7eb065e3e5b66 upstream. Currently we allow enabling dioread_nolock mount option on remount for filesystems where blocksize < PAGE_CACHE_SIZE. This isn't really supported so fix the bug by moving the check for blocksize != PAGE_CACHE_SIZE into parse_options(). Change the original PAGE_SIZE to PAGE_CACHE_SIZE along the way because that's what we are really interested in. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16i915: ensure that VGA plane is disabledKrzysztof Mazur
commit 0fde901f1ddd2ce0e380a6444f1fb7ca555859e9 upstream. Some broken systems (like HP nc6120) in some cases, usually after LID close/open, enable VGA plane, making display unusable (black screen on LVDS, some strange mode on VGA output). We used to disable VGA plane only once at startup. Now we also check, if VGA plane is still disabled while changing mode, and fix that if something changed it. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=57434 Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> [bwh: Backported to 3.2: intel_modeset_setup_hw_state() does not exist, so call i915_redisable_vga() directly from intel_lid_notify()] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-16ext4: fix extent tree corruption caused by hole punchForrest Liu
commit c36575e663e302dbaa4d16b9c72d2c9a913a9aef upstream. When depth of extent tree is greater than 1, logical start value of interior node is not correctly updated in ext4_ext_rm_idx. Signed-off-by: Forrest Liu <forrestl@synology.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Ashish Sangwan <ashishsangwan2@gmail.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-03Linux 3.2.36v3.2.36Ben Hutchings
2013-01-03ramoops: fix use of rounddown_pow_of_two()Marco Stornelli
commit fdb5950754eb3dedb9fea7c8828d3e51d9dbc3f7 upstream. The return value of rounddown_pow_of_two wasn't evaluated, so the operation was a no-op. Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com> Reported-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-03staging: vt6656: 64bit fixes: vCommandTimerWait change calculation of timer.Malcolm Priestley
commit 70e227790d4ee4590023d8041a3485f8053593fc upstream. The timer appears to run too fast/race on 64 bit systems. Using msecs_to_jiffies seems to cause a deadlock on 64 bit. A calculation of (MSecond * HZ) / 1000 appears to run satisfactory. Change BSSIDInfoCount to u32. After this patch the driver can be successfully connect on little endian 64/32 bit systems. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-01-03staging: vt6656: 64bit fixes: key.c/h change unsigned long to u32Malcolm Priestley
commit c0d05b305b00c698b0a8c1b3d46c9380bce9db45 upstream. Fixes long issues. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-24 10:25:03 +0000