aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-04-14Linux 3.13.10v3.13.10Greg Kroah-Hartman
2014-04-14crypto: ghash-clmulni-intel - use C implementation for setkey()Ard Biesheuvel
commit 8ceee72808d1ae3fb191284afc2257a2be964725 upstream. The GHASH setkey() function uses SSE registers but fails to call kernel_fpu_begin()/kernel_fpu_end(). Instead of adding these calls, and then having to deal with the restriction that they cannot be called from interrupt context, move the setkey() implementation to the C domain. Note that setkey() does not use any particular SSE features and is not expected to become a performance bottleneck. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: H. Peter Anvin <hpa@linux.intel.com> Fixes: 0e1227d356e9b (crypto: ghash - Add PCLMULQDQ accelerated implementation) Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14m68k: Skip futex_atomic_cmpxchg_inatomic() testFinn Thain
commit e571c58f313d35c56e0018470e3375ddd1fd320e upstream. Skip the futex_atomic_cmpxchg_inatomic() test in futex_init(). It causes a fatal exception on 68030 (and presumably 68020 also). Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1403061006440.5525@nippy.intranet Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14futex: Allow architectures to skip futex_atomic_cmpxchg_inatomic() testHeiko Carstens
commit 03b8c7b623c80af264c4c8d6111e5c6289933666 upstream. If an architecture has futex_atomic_cmpxchg_inatomic() implemented and there is no runtime check necessary, allow to skip the test within futex_init(). This allows to get rid of some code which would always give the same result, and also allows the compiler to optimize a couple of if statements away. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Finn Thain <fthain@telegraphics.com.au> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Link: http://lkml.kernel.org/r/20140302120947.GA3641@osiris Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [geert: Backported to v3.10..v3.13] Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14ARC: [nsimosci] Unbork consoleVineet Gupta
commit 61fb4bfc010b0d2940f7fd87acbce6a0f03217cb upstream. Despite the switch to right UART driver (prev patch), serial console still doesn't work due to missing CONFIG_SERIAL_OF_PLATFORM Also fix the default cmdline in DT to not refer to out-of-tree ARC framebuffer driver for console. Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Francois Bedard <Francois.Bedard@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14ARC: [nsimosci] Change .dts to use generic 8250 UARTMischa Jonker
commit 6eda477b3c54b8236868c8784e5e042ff14244f0 upstream. The Synopsys APB DW UART has a couple of special features that are not in the System C model. In 3.8, the 8250_dw driver didn't really use these features, but from 3.9 onwards, the 8250_dw driver has become incompatible with our model. Signed-off-by: Mischa Jonker <mjonker@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Francois Bedard <Francois.Bedard@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14powernow-k6: reorder frequenciesMikulas Patocka
commit 22c73795b101597051924556dce019385a1e2fa0 upstream. This patch reorders reported frequencies from the highest to the lowest, just like in other frequency drivers. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14powernow-k6: correctly initialize default parametersMikulas Patocka
commit d82b922a4acc1781d368aceac2f9da43b038cab2 upstream. The powernow-k6 driver used to read the initial multiplier from the powernow register. However, there is a problem with this: * If there was a frequency transition before, the multiplier read from the register corresponds to the current multiplier. * If there was no frequency transition since reset, the field in the register always reads as zero, regardless of the current multiplier that is set using switches on the mainboard and that the CPU is running at. The zero value corresponds to multiplier 4.5, so as a consequence, the powernow-k6 driver always assumes multiplier 4.5. For example, if we have 550MHz CPU with bus frequency 100MHz and multiplier 5.5, the powernow-k6 driver thinks that the multiplier is 4.5 and bus frequency is 122MHz. The powernow-k6 driver then sets the multiplier to 4.5, underclocking the CPU to 450MHz, but reports the current frequency as 550MHz. There is no reliable way how to read the initial multiplier. I modified the driver so that it contains a table of known frequencies (based on parameters of existing CPUs and some common overclocking schemes) and sets the multiplier according to the frequency. If the frequency is unknown (because of unusual overclocking or underclocking), the user must supply the bus speed and maximum multiplier as module parameters. This patch should be backported to all stable kernels. If it doesn't apply cleanly, change it, or ask me to change it. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14powernow-k6: disable cache when changing frequencyMikulas Patocka
commit e20e1d0ac02308e2211306fc67abcd0b2668fb8b upstream. I found out that a system with k6-3+ processor is unstable during network server load. The system locks up or the network card stops receiving. The reason for the instability is the CPU frequency scaling. During frequency transition the processor is in "EPM Stop Grant" state. The documentation says that the processor doesn't respond to inquiry requests in this state. Consequently, coherency of processor caches and bus master devices is not maintained, causing the system instability. This patch flushes the cache during frequency transition. It fixes the instability. Other minor changes: * u64 invalue changed to unsigned long because the variable is 32-bit * move the logic to set the multiplier to a separate function powernow_k6_set_cpu_multiplier * preserve lower 5 bits of the powernow port instead of 4 (the voltage field has 5 bits) * mask interrupts when reading the multiplier, so that the port is not open during other activity (running other kernel code with the port open shouldn't cause any misbehavior, but we should better be safe and keep the port closed) This patch should be backported to all stable kernels. If it doesn't apply cleanly, change it, or ask me to change it. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14rds: prevent dereference of a NULL device in rds_iw_laddr_checkSasha Levin
[ Upstream commit bf39b4247b8799935ea91d90db250ab608a58e50 ] Binding might result in a NULL device which is later dereferenced without checking. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14isdnloop: several buffer overflowsDan Carpenter
[ Upstream commit 7563487cbf865284dcd35e9ef5a95380da046737 ] There are three buffer overflows addressed in this patch. 1) In isdnloop_fake_err() we add an 'E' to a 60 character string and then copy it into a 60 character buffer. I have made the destination buffer 64 characters and I'm changed the sprintf() to a snprintf(). 2) In isdnloop_parse_cmd(), p points to a 6 characters into a 60 character buffer so we have 54 characters. The ->eazlist[] is 11 characters long. I have modified the code to return if the source buffer is too long. 3) In isdnloop_command() the cbuf[] array was 60 characters long but the max length of the string then can be up to 79 characters. I made the cbuf array 80 characters long and changed the sprintf() to snprintf(). I also removed the temporary "dial" buffer and changed it to use "p" directly. Unfortunately, we pass the "cbuf" string from isdnloop_command() to isdnloop_writecmd() which truncates anything over 60 characters to make it fit in card->omsg[]. (It can accept values up to 255 characters so long as there is a '\n' character every 60 characters). For now I have just fixed the memory corruption bug and left the other problems in this driver alone. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14isdnloop: Validate NUL-terminated strings from user.YOSHIFUJI Hideaki
[ Upstream commit 77bc6bed7121936bb2e019a8c336075f4c8eef62 ] Return -EINVAL unless all of user-given strings are correctly NUL-terminated. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14net: vxlan: fix crash when interface is created with no groupMike Rapoport
[ Upstream commit 5933a7bbb5de66482ea8aa874a7ebaf8e67603c4 ] If the vxlan interface is created without explicit group definition, there are corner cases which may cause kernel panic. For instance, in the following scenario: node A: $ ip link add dev vxlan42 address 2c:c2:60:00:10:20 type vxlan id 42 $ ip addr add dev vxlan42 10.0.0.1/24 $ ip link set up dev vxlan42 $ arp -i vxlan42 -s 10.0.0.2 2c:c2:60:00:01:02 $ bridge fdb add dev vxlan42 to 2c:c2:60:00:01:02 dst <IPv4 address> $ ping 10.0.0.2 node B: $ ip link add dev vxlan42 address 2c:c2:60:00:01:02 type vxlan id 42 $ ip addr add dev vxlan42 10.0.0.2/24 $ ip link set up dev vxlan42 $ arp -i vxlan42 -s 10.0.0.1 2c:c2:60:00:10:20 node B crashes: vxlan42: 2c:c2:60:00:10:20 migrated from 4011:eca4:c0a8:6466:c0a8:6415:8e09:2118 to (invalid address) vxlan42: 2c:c2:60:00:10:20 migrated from 4011:eca4:c0a8:6466:c0a8:6415:8e09:2118 to (invalid address) BUG: unable to handle kernel NULL pointer dereference at 0000000000000046 IP: [<ffffffff8143c459>] ip6_route_output+0x58/0x82 PGD 7bd89067 PUD 7bd4e067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.14.0-rc8-hvx-xen-00019-g97a5221-dirty #154 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff88007c774f50 ti: ffff88007c79c000 task.ti: ffff88007c79c000 RIP: 0010:[<ffffffff8143c459>] [<ffffffff8143c459>] ip6_route_output+0x58/0x82 RSP: 0018:ffff88007fd03668 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffffff8186a000 RCX: 0000000000000040 RDX: 0000000000000000 RSI: ffff88007b0e4a80 RDI: ffff88007fd03754 RBP: ffff88007fd03688 R08: ffff88007b0e4a80 R09: 0000000000000000 R10: 0200000a0100000a R11: 0001002200000000 R12: ffff88007fd03740 R13: ffff88007b0e4a80 R14: ffff88007b0e4a80 R15: ffff88007bba0c50 FS: 0000000000000000(0000) GS:ffff88007fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000046 CR3: 000000007bb60000 CR4: 00000000000006e0 Stack: 0000000000000000 ffff88007fd037a0 ffffffff8186a000 ffff88007fd03740 ffff88007fd036c8 ffffffff814320bb 0000000000006e49 ffff88007b8b7360 ffff88007bdbf200 ffff88007bcbc000 ffff88007b8b7000 ffff88007b8b7360 Call Trace: <IRQ> [<ffffffff814320bb>] ip6_dst_lookup_tail+0x2d/0xa4 [<ffffffff814322a5>] ip6_dst_lookup+0x10/0x12 [<ffffffff81323b4e>] vxlan_xmit_one+0x32a/0x68c [<ffffffff814a325a>] ? _raw_spin_unlock_irqrestore+0x12/0x14 [<ffffffff8104c551>] ? lock_timer_base.isra.23+0x26/0x4b [<ffffffff8132451a>] vxlan_xmit+0x66a/0x6a8 [<ffffffff8141a365>] ? ipt_do_table+0x35f/0x37e [<ffffffff81204ba2>] ? selinux_ip_postroute+0x41/0x26e [<ffffffff8139d0c1>] dev_hard_start_xmit+0x2ce/0x3ce [<ffffffff8139d491>] __dev_queue_xmit+0x2d0/0x392 [<ffffffff813b380f>] ? eth_header+0x28/0xb5 [<ffffffff8139d569>] dev_queue_xmit+0xb/0xd [<ffffffff813a5aa6>] neigh_resolve_output+0x134/0x152 [<ffffffff813db741>] ip_finish_output2+0x236/0x299 [<ffffffff813dc074>] ip_finish_output+0x98/0x9d [<ffffffff813dc749>] ip_output+0x62/0x67 [<ffffffff813da9f2>] dst_output+0xf/0x11 [<ffffffff813dc11c>] ip_local_out+0x1b/0x1f [<ffffffff813dcf1b>] ip_send_skb+0x11/0x37 [<ffffffff813dcf70>] ip_push_pending_frames+0x2f/0x33 [<ffffffff813ff732>] icmp_push_reply+0x106/0x115 [<ffffffff813ff9e4>] icmp_reply+0x142/0x164 [<ffffffff813ffb3b>] icmp_echo.part.16+0x46/0x48 [<ffffffff813c1d30>] ? nf_iterate+0x43/0x80 [<ffffffff813d8037>] ? xfrm4_policy_check.constprop.11+0x52/0x52 [<ffffffff813ffb62>] icmp_echo+0x25/0x27 [<ffffffff814005f7>] icmp_rcv+0x1d2/0x20a [<ffffffff813d8037>] ? xfrm4_policy_check.constprop.11+0x52/0x52 [<ffffffff813d810d>] ip_local_deliver_finish+0xd6/0x14f [<ffffffff813d8037>] ? xfrm4_policy_check.constprop.11+0x52/0x52 [<ffffffff813d7fde>] NF_HOOK.constprop.10+0x4c/0x53 [<ffffffff813d82bf>] ip_local_deliver+0x4a/0x4f [<ffffffff813d7f7b>] ip_rcv_finish+0x253/0x26a [<ffffffff813d7d28>] ? inet_add_protocol+0x3e/0x3e [<ffffffff813d7fde>] NF_HOOK.constprop.10+0x4c/0x53 [<ffffffff813d856a>] ip_rcv+0x2a6/0x2ec [<ffffffff8139a9a0>] __netif_receive_skb_core+0x43e/0x478 [<ffffffff812a346f>] ? virtqueue_poll+0x16/0x27 [<ffffffff8139aa2f>] __netif_receive_skb+0x55/0x5a [<ffffffff8139aaaa>] process_backlog+0x76/0x12f [<ffffffff8139add8>] net_rx_action+0xa2/0x1ab [<ffffffff81047847>] __do_softirq+0xca/0x1d1 [<ffffffff81047ace>] irq_exit+0x3e/0x85 [<ffffffff8100b98b>] do_IRQ+0xa9/0xc4 [<ffffffff814a37ad>] common_interrupt+0x6d/0x6d <EOI> [<ffffffff810378db>] ? native_safe_halt+0x6/0x8 [<ffffffff810110c7>] default_idle+0x9/0xd [<ffffffff81011694>] arch_cpu_idle+0x13/0x1c [<ffffffff8107480d>] cpu_startup_entry+0xbc/0x137 [<ffffffff8102e741>] start_secondary+0x1a0/0x1a5 Code: 24 14 e8 f1 e5 01 00 31 d2 a8 32 0f 95 c2 49 8b 44 24 2c 49 0b 44 24 24 74 05 83 ca 04 eb 1c 4d 85 ed 74 17 49 8b 85 a8 02 00 00 <66> 8b 40 46 66 c1 e8 07 83 e0 07 c1 e0 03 09 c2 4c 89 e6 48 89 RIP [<ffffffff8143c459>] ip6_route_output+0x58/0x82 RSP <ffff88007fd03668> CR2: 0000000000000046 ---[ end trace 4612329caab37efd ]--- When vxlan interface is created without explicit group definition, the default_dst protocol family is initialiazed to AF_UNSPEC and the driver assumes IPv4 configuration. On the other side, the default_dst protocol family is used to differentiate between IPv4 and IPv6 cases and, since, AF_UNSPEC != AF_INET, the processing takes the IPv6 path. Making the IPv4 assumption explicit by settting default_dst protocol family to AF_INET4 and preventing mixing of IPv4 and IPv6 addresses in snooped fdb entries fixes the corner case crashes. Signed-off-by: Mike Rapoport <mike.rapoport@ravellosystems.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14Call efx_set_channels() before efx->type->dimension_resources()Daniel Pieczko
[ Upstream commit 52ad762b85ed7947ec9eff6b036eb985352f6874 ] When using the "separate_tx_channels=1" module parameter, the TX queues are initially numbered starting from the first TX-only channel number (after all the RX-only channels). efx_set_channels() renumbers the queues so that they are indexed from zero. On EF10, the TX queues need to be relabelled in this way before calling the dimension_resources NIC type operation, otherwise the TX queue PIO buffers can be linked to the wrong VIs when using "separate_tx_channels=1". Added comments to explain UC/WC mappings for PIO buffers Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14xen-netback: disable rogue vif in kthread contextWei Liu
[ Upstream commit e9d8b2c2968499c1f96563e6522c56958d5a1d0d ] When netback discovers frontend is sending malformed packet it will disables the interface which serves that frontend. However disabling a network interface involving taking a mutex which cannot be done in softirq context, so we need to defer this process to kthread context. This patch does the following: 1. introduce a flag to indicate the interface is disabled. 2. check that flag in TX path, don't do any work if it's true. 3. check that flag in RX path, turn off that interface if it's true. The reason to disable it in RX path is because RX uses kthread. After this change the behavior of netback is still consistent -- it won't do any TX work for a rogue frontend, and the interface will be eventually turned off. Also change a "continue" to "break" after xenvif_fatal_tx_err, as it doesn't make sense to continue processing packets if frontend is rogue. This is a fix for XSA-90. Reported-by: Török Edwin <edwin@etorok.net> Signed-off-by: Wei Liu <wei.liu2@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14netlink: don't compare the nul-termination in nla_strcmpPablo Neira
[ Upstream commit 8b7b932434f5eee495b91a2804f5b64ebb2bc835 ] nla_strcmp compares the string length plus one, so it's implicitly including the nul-termination in the comparison. int nla_strcmp(const struct nlattr *nla, const char *str) { int len = strlen(str) + 1; ... d = memcmp(nla_data(nla), str, len); However, if NLA_STRING is used, userspace can send us a string without the nul-termination. This is a problem since the string comparison will not match as the last byte may be not the nul-termination. Fix this by skipping the comparison of the nul-termination if the attribute data is nul-terminated. Suggested by Thomas Graf. Cc: Florian Westphal <fw@strlen.de> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14ipv6: some ipv6 statistic counters failed to disable bhHannes Frederic Sowa
[ Upstream commit 43a43b6040165f7b40b5b489fe61a4cb7f8c4980 ] After commit c15b1ccadb323ea ("ipv6: move DAD and addrconf_verify processing to workqueue") some counters are now updated in process context and thus need to disable bh before doing so, otherwise deadlocks can happen on 32-bit archs. Fabio Estevam noticed this while while mounting a NFS volume on an ARM board. As a compensation for missing this I looked after the other *_STATS_BH and found three other calls which need updating: 1) icmp6_send: ip6_fragment -> icmpv6_send -> icmp6_send (error handling) 2) ip6_push_pending_frames: rawv6_sendmsg -> rawv6_push_pending_frames -> ... (only in case of icmp protocol with raw sockets in error handling) 3) ping6_v6_sendmsg (error handling) Fixes: c15b1ccadb323ea ("ipv6: move DAD and addrconf_verify processing to workqueue") Reported-by: Fabio Estevam <festevam@gmail.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14xen-netback: remove pointless clause from if statementPaul Durrant
[ Upstream commit 0576eddf24df716d8570ef8ca11452a9f98eaab2 ] This patch removes a test in start_new_rx_buffer() that checks whether a copy operation is less than MAX_BUFFER_OFFSET in length, since MAX_BUFFER_OFFSET is defined to be PAGE_SIZE and the only caller of start_new_rx_buffer() already limits copy operations to PAGE_SIZE or less. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Sander Eikelenboom <linux@eikelenboom.it> Reported-By: Sander Eikelenboom <linux@eikelenboom.it> Tested-By: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14tcp: fix get_timewait4_sock() delay computation on 64bitEric Dumazet
[ Upstream commit e2a1d3e47bb904082b758dec9d07edf241c45d05 ] It seems I missed one change in get_timewait4_sock() to compute the remaining time before deletion of IPV4 timewait socket. This could result in wrong output in /proc/net/tcp for tm->when field. Fixes: 96f817fedec4 ("tcp: shrink tcp6_timewait_sock by one cache line") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14vhost: validate vhost_get_vq_desc return valueMichael S. Tsirkin
[ Upstream commit a39ee449f96a2cd44ce056d8a0a112211a9b1a1f ] vhost fails to validate negative error code from vhost_get_vq_desc causing a crash: we are using -EFAULT which is 0xfffffff2 as vector size, which exceeds the allocated size. The code in question was introduced in commit 8dd014adfea6f173c1ef6378f7e5e7924866c923 vhost-net: mergeable buffers support CVE-2014-0055 Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14vhost: fix total length when packets are too shortMichael S. Tsirkin
[ Upstream commit d8316f3991d207fe32881a9ac20241be8fa2bad0 ] When mergeable buffers are disabled, and the incoming packet is too large for the rx buffer, get_rx_bufs returns success. This was intentional in order for make recvmsg truncate the packet and then handle_rx would detect err != sock_len and drop it. Unfortunately we pass the original sock_len to recvmsg - which means we use parts of iov not fully validated. Fix this up by detecting this overrun and doing packet drop immediately. CVE-2014-0077 Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14vlan: Set hard_header_len according to available accelerationVlad Yasevich
[ Upstream commit fc0d48b8fb449ca007b2057328abf736cb516168 ] Currently, if the card supports CTAG acceleration we do not account for the vlan header even if we are configuring an 8021AD vlan. This may not be best since we'll do software tagging for 8021AD which will cause data copy on skb head expansion Configure the length based on available hw offload capabilities and vlan protocol. CC: Patrick McHardy <kaber@trash.net> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14usbnet: include wait queue head in device structureOliver Neukum
[ Upstream commit 14a0d635d18d0fb552dcc979d6d25106e6541f2e ] This fixes a race which happens by freeing an object on the stack. Quoting Julius: > The issue is > that it calls usbnet_terminate_urbs() before that, which temporarily > installs a waitqueue in dev->wait in order to be able to wait on the > tasklet to run and finish up some queues. The waiting itself looks > okay, but the access to 'dev->wait' is totally unprotected and can > race arbitrarily. I think in this case usbnet_bh() managed to succeed > it's dev->wait check just before usbnet_terminate_urbs() sets it back > to NULL. The latter then finishes and the waitqueue_t structure on its > stack gets overwritten by other functions halfway through the > wake_up() call in usbnet_bh(). The fix is to just not allocate the data structure on the stack. As dev->wait is abused as a flag it also takes a runtime PM change to fix this bug. Signed-off-by: Oliver Neukum <oneukum@suse.de> Reported-by: Grant Grundler <grundler@google.com> Tested-by: Grant Grundler <grundler@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14virtio-net: correct error handling of virtqueue_kick()Jason Wang
[ Upstream commit 681daee2443291419c57cccb0671f5f94a839005 ] Current error handling of virtqueue_kick() was wrong in two places: - The skb were freed immediately when virtqueue_kick() fail during xmit. This may lead double free since the skb was not detached from the virtqueue. - try_fill_recv() returns false when virtqueue_kick() fail. This will lead unnecessary rescheduling of refill work. Actually, it's safe to just ignore the kick failure in those two places. So this patch fixes this by partially revert commit 67975901183799af8e93ec60e322f9e2a1940b9b. Fixes 67975901183799af8e93ec60e322f9e2a1940b9b (virtio_net: verify if virtqueue_kick() succeeded). Cc: Heinz Graalfs <graalfs@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14tg3: Do not include vlan acceleration features in vlan_featuresVlad Yasevich
[ Upstream commit 51dfe7b944998eaeb2b34d314f3a6b16a5fd621b ] Including hardware acceleration features in vlan_features breaks stacked vlans (Q-in-Q) by marking the bottom vlan interface as capable of acceleration. This causes one of the tags to be lost and the packets are sent with a sing vlan header. CC: Nithin Nayak Sujir <nsujir@broadcom.com> CC: Michael Chan <mchan@broadcom.com> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14ip_tunnel: Fix dst ref-count.Pravin B Shelar
[ Upstream commit fbd02dd405d0724a0f25897ed4a6813297c9b96f ] Commit 10ddceb22ba (ip_tunnel:multicast process cause panic due to skb->_skb_refdst NULL pointer) removed dst-drop call from ip-tunnel-recv. Following commit reintroduce dst-drop and fix the original bug by checking loopback packet before releasing dst. Original bug: https://bugzilla.kernel.org/show_bug.cgi?id=70681 CC: Xin Long <lucien.xin@gmail.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14tipc: fix spinlock recursion bug for failed subscriptionsErik Hugne
[ Upstream commit a5d0e7c037119484a7006b883618bfa87996cb41 ] If a topology event subscription fails for any reason, such as out of memory, max number reached or because we received an invalid request the correct behavior is to terminate the subscribers connection to the topology server. This is currently broken and produces the following oops: [27.953662] tipc: Subscription rejected, illegal request [27.955329] BUG: spinlock recursion on CPU#1, kworker/u4:0/6 [27.957066] lock: 0xffff88003c67f408, .magic: dead4ead, .owner: kworker/u4:0/6, .owner_cpu: 1 [27.958054] CPU: 1 PID: 6 Comm: kworker/u4:0 Not tainted 3.14.0-rc6+ #5 [27.960230] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [27.960874] Workqueue: tipc_rcv tipc_recv_work [tipc] [27.961430] ffff88003c67f408 ffff88003de27c18 ffffffff815c0207 ffff88003de1c050 [27.962292] ffff88003de27c38 ffffffff815beec5 ffff88003c67f408 ffffffff817f0a8a [27.963152] ffff88003de27c58 ffffffff815beeeb ffff88003c67f408 ffffffffa0013520 [27.964023] Call Trace: [27.964292] [<ffffffff815c0207>] dump_stack+0x45/0x56 [27.964874] [<ffffffff815beec5>] spin_dump+0x8c/0x91 [27.965420] [<ffffffff815beeeb>] spin_bug+0x21/0x26 [27.965995] [<ffffffff81083df6>] do_raw_spin_lock+0x116/0x140 [27.966631] [<ffffffff815c6215>] _raw_spin_lock_bh+0x15/0x20 [27.967256] [<ffffffffa0008540>] subscr_conn_shutdown_event+0x20/0xa0 [tipc] [27.968051] [<ffffffffa000fde4>] tipc_close_conn+0xa4/0xb0 [tipc] [27.968722] [<ffffffffa00101ba>] tipc_conn_terminate+0x1a/0x30 [tipc] [27.969436] [<ffffffffa00089a2>] subscr_conn_msg_event+0x1f2/0x2f0 [tipc] [27.970209] [<ffffffffa0010000>] tipc_receive_from_sock+0x90/0xf0 [tipc] [27.970972] [<ffffffffa000fa79>] tipc_recv_work+0x29/0x50 [tipc] [27.971633] [<ffffffff8105dbf5>] process_one_work+0x165/0x3e0 [27.972267] [<ffffffff8105e869>] worker_thread+0x119/0x3a0 [27.972896] [<ffffffff8105e750>] ? manage_workers.isra.25+0x2a0/0x2a0 [27.973622] [<ffffffff810648af>] kthread+0xdf/0x100 [27.974168] [<ffffffff810647d0>] ? kthread_create_on_node+0x1a0/0x1a0 [27.974893] [<ffffffff815ce13c>] ret_from_fork+0x7c/0xb0 [27.975466] [<ffffffff810647d0>] ? kthread_create_on_node+0x1a0/0x1a0 The recursion occurs when subscr_terminate tries to grab the subscriber lock, which is already taken by subscr_conn_msg_event. We fix this by checking if the request to establish a new subscription was successful, and if not we initiate termination of the subscriber after we have released the subscriber lock. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14netpoll: fix the skb check in pkt_is_nsLi RongQing
[ Not applicable upstream commit, the code here has been removed upstream. ] Neighbor Solicitation is ipv6 protocol, so we should check skb->protocol with ETH_P_IPV6 Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Cc: WANG Cong <amwang@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14net: micrel : ks8851-ml: add vdd-supply supportNishanth Menon
[ Upstream commit ebf4ad955d3e26d4d2a33709624fc7b5b9d3b969 ] Few platforms use external regulator to keep the ethernet MAC supplied. So, request and enable the regulator for driver functionality. Fixes: 66fda75f47dc (regulator: core: Replace direct ops->disable usage) Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Suggested-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14ip6mr: fix mfc notification flagsNicolas Dichtel
[ Upstream commit f518338b16038beeb73e155e60d0f70beb9379f4 ] Commit 812e44dd1829 ("ip6mr: advertise new mfc entries via rtnl") reuses the function ip6mr_fill_mroute() to notify mfc events. But this function was used only for dump and thus was always setting the flag NLM_F_MULTI, which is wrong in case of a single notification. Libraries like libnl will wait forever for NLMSG_DONE. CC: Thomas Graf <tgraf@suug.ch> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14ipmr: fix mfc notification flagsNicolas Dichtel
[ Upstream commit 65886f439ab0fdc2dff20d1fa87afb98c6717472 ] Commit 8cd3ac9f9b7b ("ipmr: advertise new mfc entries via rtnl") reuses the function ipmr_fill_mroute() to notify mfc events. But this function was used only for dump and thus was always setting the flag NLM_F_MULTI, which is wrong in case of a single notification. Libraries like libnl will wait forever for NLMSG_DONE. CC: Thomas Graf <tgraf@suug.ch> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14rtnetlink: fix fdb notification flagsNicolas Dichtel
[ Upstream commit 1c104a6bebf3c16b6248408b84f91d09ac8a26b6 ] Commit 3ff661c38c84 ("net: rtnetlink notify events for FDB NTF_SELF adds and deletes") reuses the function nlmsg_populate_fdb_fill() to notify fdb events. But this function was used only for dump and thus was always setting the flag NLM_F_MULTI, which is wrong in case of a single notification. Libraries like libnl will wait forever for NLMSG_DONE. CC: Thomas Graf <tgraf@suug.ch> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14tcp: syncookies: do not use getnstimeofday()Eric Dumazet
[ Upstream commit 632623153196bf183a69686ed9c07eee98ff1bf8 ] While it is true that getnstimeofday() uses about 40 cycles if TSC is available, it can use 1600 cycles if hpet is the clocksource. Switch to get_jiffies_64(), as this is more than enough, and go back to 60 seconds periods. Fixes: 8c27bd75f04f ("tcp: syncookies: reduce cookie lifetime to 128 seconds") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14vxlan: fix nonfunctional neigh_reduce()David Stevens
[ Upstream commit 4b29dba9c085a4fb79058fb1c45a2f6257ca3dfa ] The VXLAN neigh_reduce() code is completely non-functional since check-in. Specific errors: 1) The original code drops all packets with a multicast destination address, even though neighbor solicitations are sent to the solicited-node address, a multicast address. The code after this check was never run. 2) The neighbor table lookup used the IPv6 header destination, which is the solicited node address, rather than the target address from the neighbor solicitation. So neighbor lookups would always fail if it got this far. Also for L3MISSes. 3) The code calls ndisc_send_na(), which does a send on the tunnel device. The context for neigh_reduce() is the transmit path, vxlan_xmit(), where the host or a bridge-attached neighbor is trying to transmit a neighbor solicitation. To respond to it, the tunnel endpoint needs to do a *receive* of the appropriate neighbor advertisement. Doing a send, would only try to send the advertisement, encapsulated, to the remote destinations in the fdb -- hosts that definitely did not do the corresponding solicitation. 4) The code uses the tunnel endpoint IPv6 forwarding flag to determine the isrouter flag in the advertisement. This has nothing to do with whether or not the target is a router, and generally won't be set since the tunnel endpoint is bridging, not routing, traffic. The patch below creates a proxy neighbor advertisement to respond to neighbor solicitions as intended, providing proper IPv6 support for neighbor reduction. Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14vxlan: fix potential NULL dereference in arp_reduce()David Stevens
[ Upstream commit 7346135dcd3f9b57f30a5512094848c678d7143e ] This patch fixes a NULL pointer dereference in the event of an skb allocation failure in arp_reduce(). Signed-Off-By: David L Stevens <dlstevens@us.ibm.com> Acked-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14net: cdc_ncm: fix control message orderingBjørn Mork
[ Upstream commit ff0992e9036e9810e7cd45234fa32ca1e79750e2 ] This is a context modified revert of commit 6a9612e2cb22 ("net: cdc_ncm: remove ncm_parm field") which introduced a NCM specification violation, causing setup errors for some devices. These errors resulted in the device and host disagreeing about shared settings, with complete failure to communicate as the end result. The NCM specification require that many of the NCM specific control reuests are sent only while the NCM Data Interface is in alternate setting 0. Reverting the commit ensures that we follow this requirement. Fixes: 6a9612e2cb22 ("net: cdc_ncm: remove ncm_parm field") Reported-and-tested-by: Pasi Kärkkäinen <pasik@iki.fi> Reported-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14ipv6: ip6_append_data_mtu do not handle the mtu of the second fragment properlylucien
[ Upstream commit e367c2d03dba4c9bcafad24688fadb79dd95b218 ] In ip6_append_data_mtu(), when the xfrm mode is not tunnel(such as transport),the ipsec header need to be added in the first fragment, so the mtu will decrease to reserve space for it, then the second fragment come, the mtu should be turn back, as the commit 0c1833797a5a6ec23ea9261d979aa18078720b74 said. however, in the commit a493e60ac4bbe2e977e7129d6d8cbb0dd236be, it use *mtu = min(*mtu, ...) to change the mtu, which lead to the new mtu is alway equal with the first fragment's. and cannot turn back. when I test through ping6 -c1 -s5000 $ip (mtu=1280): ...frag (0|1232) ESP(spi=0x00002000,seq=0xb), length 1232 ...frag (1232|1216) ...frag (2448|1216) ...frag (3664|1216) ...frag (4880|164) which should be: ...frag (0|1232) ESP(spi=0x00001000,seq=0x1), length 1232 ...frag (1232|1232) ...frag (2464|1232) ...frag (3696|1232) ...frag (4928|116) so delete the min() when change back the mtu. Signed-off-by: Xin Long <lucien.xin@gmail.com> Fixes: 75a493e60ac4bb ("ipv6: ip6_append_data_mtu did not care about pmtudisc and frag_size") Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14ipv6: Avoid unnecessary temporary addresses being generatedHeiner Kallweit
[ Upstream commit ecab67015ef6e3f3635551dcc9971cf363cc1cd5 ] tmp_prefered_lft is an offset to ifp->tstamp, not now. Therefore age needs to be added to the condition. Age calculation in ipv6_create_tempaddr is different from the one in addrconf_verify and doesn't consider ADDRCONF_TIMER_FUZZ_MINUS. This can cause age in ipv6_create_tempaddr to be less than the one in addrconf_verify and therefore unnecessary temporary address to be generated. Use age calculation as in addrconf_modify to avoid this. Signed-off-by: Heiner Kallweit <heiner.kallweit@web.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14eth: fec: Fix lost promiscuous mode after reconnecting cableStefan Wahren
[ Upstream commit 84fe61821e4ebab6322eeae3f3c27f77f0031978 ] If the Freescale fec is in promiscuous mode and network cable is reconnected then the promiscuous mode get lost. The problem is caused by a too soon call of set_multicast_list to re-enable promisc mode. The FEC_R_CNTRL register changes are overwritten by fec_restart. This patch fixes this by moving the call behind the init of FEC_R_CNTRL register in fec_restart. Successful tested on a i.MX28 board. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14bonding: set correct vlan id for alb xmit pathdingtianhong
[ Upstream commit fb00bc2e6cd2046282ba4b03f4fe682aee70b2f8 ] The commit d3ab3ffd1d728d7ee77340e7e7e2c7cfe6a4013e (bonding: use rlb_client_info->vlan_id instead of ->tag) remove the rlb_client_info->tag, but occur some issues, The vlan_get_tag() will return 0 for success and -EINVAL for error, so the client_info->vlan_id always be set to 0 if the vlan_get_tag return 0 for success, so the client_info would never get a correct vlan id. We should only set the vlan id to 0 when the vlan_get_tag return error. Fixes: d3ab3ffd1d7 (bonding: use rlb_client_info->vlan_id instead of ->tag) CC: Ding Tianhong <dingtianhong@huawei.com> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14net: socket: error on a negative msg_namelenMatthew Leach
[ Upstream commit dbb490b96584d4e958533fb637f08b557f505657 ] When copying in a struct msghdr from the user, if the user has set the msg_namelen parameter to a negative value it gets clamped to a valid size due to a comparison between signed and unsigned values. Ensure the syscall errors when the user passes in a negative value. Signed-off-by: Matthew Leach <matthew.leach@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14bridge: multicast: enable snooping on general queries onlyLinus Lüssing
[ Upstream commit 20a599bec95a52fa72432b2376a2ce47c5bb68fb ] Without this check someone could easily create a denial of service by injecting multicast-specific queries to enable the bridge snooping part if no real querier issuing periodic general queries is present on the link which would result in the bridge wrongly shutting down ports for multicast traffic as the bridge did not learn about these listeners. With this patch the snooping code is enabled upon receiving valid, general queries only. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14bridge: multicast: add sanity check for general query destinationLinus Lüssing
[ Upstream commit 9ed973cc40c588abeaa58aea0683ea665132d11d ] General IGMP and MLD queries are supposed to have the multicast link-local all-nodes address as their destination according to RFC2236 section 9, RFC3376 section 4.1.12/9.1, RFC2710 section 8 and RFC3810 section 5.1.15. Without this check, such malformed IGMP/MLD queries can result in a denial of service: The queries are ignored by most IGMP/MLD listeners therefore they will not respond with an IGMP/MLD report. However, without this patch these malformed MLD queries would enable the snooping part in the bridge code, potentially shutting down the according ports towards these hosts for multicast traffic as the bridge did not learn about these listeners. Reported-by: Jan Stancek <jstancek@redhat.com> Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14tcp: tcp_release_cb() should release socket ownershipEric Dumazet
[ Upstream commit c3f9b01849ef3bc69024990092b9f42e20df7797 ] Lars Persson reported following deadlock : -000 |M:0x0:0x802B6AF8(asm) <-- arch_spin_lock -001 |tcp_v4_rcv(skb = 0x8BD527A0) <-- sk = 0x8BE6B2A0 -002 |ip_local_deliver_finish(skb = 0x8BD527A0) -003 |__netif_receive_skb_core(skb = 0x8BD527A0, ?) -004 |netif_receive_skb(skb = 0x8BD527A0) -005 |elk_poll(napi = 0x8C770500, budget = 64) -006 |net_rx_action(?) -007 |__do_softirq() -008 |do_softirq() -009 |local_bh_enable() -010 |tcp_rcv_established(sk = 0x8BE6B2A0, skb = 0x87D3A9E0, th = 0x814EBE14, ?) -011 |tcp_v4_do_rcv(sk = 0x8BE6B2A0, skb = 0x87D3A9E0) -012 |tcp_delack_timer_handler(sk = 0x8BE6B2A0) -013 |tcp_release_cb(sk = 0x8BE6B2A0) -014 |release_sock(sk = 0x8BE6B2A0) -015 |tcp_sendmsg(?, sk = 0x8BE6B2A0, ?, ?) -016 |sock_sendmsg(sock = 0x8518C4C0, msg = 0x87D8DAA8, size = 4096) -017 |kernel_sendmsg(?, ?, ?, ?, size = 4096) -018 |smb_send_kvec() -019 |smb_send_rqst(server = 0x87C4D400, rqst = 0x87D8DBA0) -020 |cifs_call_async() -021 |cifs_async_writev(wdata = 0x87FD6580) -022 |cifs_writepages(mapping = 0x852096E4, wbc = 0x87D8DC88) -023 |__writeback_single_inode(inode = 0x852095D0, wbc = 0x87D8DC88) -024 |writeback_sb_inodes(sb = 0x87D6D800, wb = 0x87E4A9C0, work = 0x87D8DD88) -025 |__writeback_inodes_wb(wb = 0x87E4A9C0, work = 0x87D8DD88) -026 |wb_writeback(wb = 0x87E4A9C0, work = 0x87D8DD88) -027 |wb_do_writeback(wb = 0x87E4A9C0, force_wait = 0) -028 |bdi_writeback_workfn(work = 0x87E4A9CC) -029 |process_one_work(worker = 0x8B045880, work = 0x87E4A9CC) -030 |worker_thread(__worker = 0x8B045880) -031 |kthread(_create = 0x87CADD90) -032 |ret_from_kernel_thread(asm) Bug occurs because __tcp_checksum_complete_user() enables BH, assuming it is running from softirq context. Lars trace involved a NIC without RX checksum support but other points are problematic as well, like the prequeue stuff. Problem is triggered by a timer, that found socket being owned by user. tcp_release_cb() should call tcp_write_timer_handler() or tcp_delack_timer_handler() in the appropriate context : BH disabled and socket lock held, but 'owned' field cleared, as if they were running from timer handlers. Fixes: 6f458dfb4092 ("tcp: improve latencies of timer triggered events") Reported-by: Lars Persson <lars.persson@axis.com> Tested-by: Lars Persson <lars.persson@axis.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14skbuff: skb_segment: orphan frags before copyingMichael S. Tsirkin
[ Upstream commit 1fd819ecb90cc9b822cd84d3056ddba315d3340f ] skb_segment copies frags around, so we need to copy them carefully to avoid accessing user memory after reporting completion to userspace through a callback. skb_segment doesn't normally happen on datapath: TSO needs to be disabled - so disabling zero copy in this case does not look like a big deal. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14skbuff: skb_segment: s/fskb/list_skb/Michael S. Tsirkin
[ Upstream commit 1a4cedaf65491e66e1e55b8428c89209da729209 ] fskb is unrelated to frag: it's coming from frag_list. Rename it list_skb to avoid confusion. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14skbuff: skb_segment: s/skb/head_skb/Michael S. Tsirkin
[ Upstream commit df5771ffefb13f8af5392bd54fd7e2b596a3a357 ] rename local variable to make it easier to tell at a glance that we are dealing with a head skb. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14skbuff: skb_segment: s/skb_frag/frag/Michael S. Tsirkin
[ Upstream commit 4e1beba12d094c6c761ba5c49032b9b9e46380e8 ] skb_frag can in fact point at either skb or fskb so rename it generally "frag". Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14skbuff: skb_segment: s/frag/nskb_frag/Michael S. Tsirkin
[ Upstream commit 8cb19905e9287a93ce7c2cbbdf742a060b00e219 ] frag points at nskb, so name it appropriately Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14vlan: Set correct source MAC address with TX VLAN offload enabledPeter Boström
[ Upstream commit dd38743b4cc2f86be250eaf156cf113ba3dd531a ] With TX VLAN offload enabled the source MAC address for frames sent using the VLAN interface is currently set to the address of the real interface. This is wrong since the VLAN interface may be configured with a different address. The bug was introduced in commit 2205369a314e12fcec4781cc73ac9c08fc2b47de ("vlan: Fix header ops passthru when doing TX VLAN offload."). This patch sets the source address before calling the create function of the real interface. Signed-off-by: Peter Boström <peter.bostrom@netrounds.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-28 12:58:48 +0000