aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-03-10NFC: llcp: Service Name Lookup SDRES aggregationThierry Escande
This modifies the way SDRES PDUs are sent back. If multiple SDREQs are received within a single SNL PDU, all SDRES replies are sent packed in one SNL PDU too. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-10NFC: Add missing type policies for netlink attributesThierry Escande
Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-10NFC: llcp: Remove redundant printkSamuel Ortiz
We already have a pr_debug for that. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-10NFC: llcp: Use socket specific link parameters before the local onesSamuel Ortiz
If the socket link options are set, use them before the local one. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-10NFC: llcp: Implement socket optionsSamuel Ortiz
Some LLCP services (e.g. the validation ones) require some control over the LLCP link parameters like the receive window (RW) or the MIU extension (MIUX). This can only be done through socket options. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-10NFC: llcp: Rename socket rw and miu fieldsSamuel Ortiz
They really are remote peer parameters, and we need to distinguish them from the local ones as we'll modify the latter with socket options. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-10NFC: microread: Fix MEI build failureSamuel Ortiz
The mei_device field should be called device, not mei_device. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-08mwifiex: fix potential null dereference 'mef_entry'Bing Zhao
drivers/net/wireless/mwifiex/cfg80211.c:2357 mwifiex_cfg80211_suspend() error: potential null dereference 'mef_entry' (kzalloc returns null) Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-08mwifiex: Trigger a card reset on reaching tx_timeout thresholdAshok Nagarajan
tx_timeout doesn't always lead to a cmd_timeout. There are occurrences where cmd_timeout never gets triggered for a long time and we encounter a kernel crash. In this patch, we track the consecutive timeouts (tx_timeout_cnt). When tx_timeout_cnt exceeds the threshold, trigger a card reset thereby avoiding a kernel crash. Signed-off-by: Ashok Nagarajan <asnagarajan@chromium.org> Signed-off-by: Paul Stewart <pstew@chromium.org> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-08rndis_wlan: update email addressJussi Kivilinna
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-08Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2013-03-08Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-03-06mwifiex: add WOWLAN supportAmitkumar Karwar
Currently 'magic-packet' and 'patterns' options in 'iw wowlan' command are supported. Appropriate packet filters for wowlan are configured in firmware based on provided patterns and/or magic-packet option. For examples, wake-on ARP request for 192.168.0.100: iw phy0 wowlan enable patterns ff:ff:ff:ff:ff:ff 20+08:06 46+c0:a8:00:64 wake-on RX packets sent from IP address 192.168.0.88: iw phy0 wowlan enable patterns 34+c0:a8:00:58 wake-on RX packets with TCP destination port 80 iw phy0 wowlan enable patterns 44+50 wake-on MagicPacket: iw phy0 wowlan enable magic-packet wake-on MagicPacket or patterns: iw phy0 wowlan enable magic-packet patterns 12+00:11:22:33:44:55 18+00:50:43:21 wake-on IPv4 multicast packets: iw phy0 wowlan enable patterns 01:00:5e wake-on IPv6 multicast packets: iw phy0 wowlan enable patterns 33:33 disable all wowlan options iw phy0 wowlan disable Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06mwifiex: add "ethtool wol" command supportAmitkumar Karwar
Host sleep wakeup condition is configured using this command. Supports Wake-on: pumb For examples: wake-on any unicast packets: ethtool -s mlan0 wol u wake-on multicast/broadcast packet: ethtool -s mlan0 wol mb wake-on unicast packets and MAC events: ethtool -s mlan0 wol pu wake-on unicast/multicast/broadcast packets and MAC events: ethtool -s mlan0 wol pmbu disable all wake-on options: ethtool -s mlan0 wol d Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06mwifiex: shorten the host sleep configuration macro namesAmitkumar Karwar
As we are adding a few more macros in this category in next patch, this cleanup work is required. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06mwifiex: modify skb->truesize for PCIE RxAvinash Patil
We allocate SKB buffers of 4K size to make sure that we process RX AMSDU of 4K. So when skb->len is lesser than 4K; we should modify skb->truesize. This resolves an issue where kernel has allocated packets with 2K assumption and starts dropping packets for large size data transfer. This fix is already present for USB; extend it to PCIE. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06mwifiex: avoid [-Wmaybe-uninitialized] warnings in pcie.cBing Zhao
drivers/net/wireless/mwifiex/pcie.c:1157:9: warning: 'desc2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/net/wireless/mwifiex/pcie.c:1048:31: note: 'desc2' was declared here drivers/net/wireless/mwifiex/pcie.c:1159:9: warning: 'desc' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/net/wireless/mwifiex/pcie.c:1047:32: note: 'desc' was declared here Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06mwifiex: fix [-Wunused-function] warnings on pcie suspend/resumeBing Zhao
drivers/net/wireless/mwifiex/pcie.c:204:12: warning: 'mwifiex_pcie_resume' defined but not used [-Wunused-function] drivers/net/wireless/mwifiex/pcie.c:166:12: warning: 'mwifiex_pcie_suspend' defined but not used [-Wunused-function] The suspend/resume handlers ought to be under CONFIG_PM directive. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06mwifiex: remove static forward declarations in pcie.cBing Zhao
move functions up just to avoid static forward declaration for mwifiex_pcie_resume. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06ath9k: Report rx-crc-errors in ethtool stats.Ben Greear
Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06ath9k: Report txerr-filtered errors in debugfs.Ben Greear
Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06b43: HT-PHY: make it BCMA-onlyRafał Miłecki
HT-PHY was found only on BCM4331 which is a BCMA-based chipset. This is reallly unlikely we will ever see HT-PHY on SSB thus make the whole code BCMA specific. This will allow us to call various BCMA-specific functions directly (without extra checks). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06ath9k_hw: Fix fixed antenna for AR9462Sujith Manoharan
When the RX chainmask is set to 0x2 for AR9462, certain values from chain1 have to be programmed for chain0 also. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06ath9k_hw: Update initvals for AR9462Sujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06ath9k_hw: Use helper functions to simplify HW resetSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06ath9k_hw: Remove CHANNEL_CW_INTSujith Manoharan
This flag is used for indicating channel interference and we currently do nothing with it, so remove it. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06brcmfmac: add parameter to brcmf_proto_hdrpush() for data offsetArend van Spriel
The function brcmf_proto_hdrpush() increases the header space and fills in the protocol header fields. One field is the data offset which is currently fixed to zero meaning the data follows right after the header. The parameter is added to determine the actual start of data. This will be used for firmware signalling. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06brcmutil: add dequeue function with filteringArend van Spriel
Adding a packet dequeue function that will return packets that pass the provided match function. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06brcmfmac: assure brcmf_txcomplete() is called in failure pathsArend van Spriel
For transmit packets the function brcmf_txcomplete() must be called. This should be done as well when for some reason the transmit fails to assure proper tx post processing. This patch fixes the code paths in brcmf_usb_tx() that forgot to do so. Reviewed-by: Piotr Haber <phaber@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06brcmfmac: release transmit packet in brcmf_txcomplete()Arend van Spriel
In the bus-specific driver code each call to brcmf_txcomplete() is following by a free of that packet. This patch moves that free to the brcmf_txcomplete() function. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06brcmfmac: add support for TLV based firmware signallingArend van Spriel
The firmware and host can exchange signals which are carried within the data packets. These are TLV based signals that are inserted before the actual data, ie. ethernet frame. This commit adds the new source module for this feature and enables RSSI signals from firmware. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06brcmutil: add macros for setting bitfields using mask/shift operationsArend van Spriel
Added inline functions to set bitfields in an unsigned integer variable. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06brcmfmac: increase required skbuff headroom for firmware signallingArend van Spriel
In preparation of firmware signalling feature additional headroom is needed to accommodate signalling protocol data between host and firmware. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06brcmfmac: remove null-pointer check in .sched_scan_start() callbackArend van Spriel
In brcmf_cfg80211_sched_scan_start() the request parameter was checked for being non-null. However, it never is so remove the check which gets rid of following smatch warning: drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c:2904 brcmf_cfg80211_sched_scan_start() warn: variable dereferenced before check 'request' (see line 2897) Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06brcmfmac: cleanup module information macrosArend van Spriel
The output of modinfo shows a bit of strangeness because module information macros are used in multiple source files: license: Dual BSD/GPL description: Broadcom 802.11 wireless LAN fullmac driver. author: Broadcom Corporation firmware: brcm/brcmfmac-sdio.txt firmware: brcm/brcmfmac-sdio.bin firmware: brcm/brcmfmac43236b.bin license: Dual BSD/GPL description: Broadcom 802.11n wireless LAN fullmac usb driver. author: Broadcom Corporation This patch cleans it up. Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06brcmfmac: make debug module parameter more clearArend van Spriel
The module parameter definition for brcmf_msg_level has been reworked to a named module parameter with description so modinfo is a bit more informative: parm: debug:level of debug output (int) Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06brcmfmac: introduce tracepoints for message loggingArend van Spriel
Inspired by tracing functionality added by Seth Forshee in the brcmsmac driver, this patch adds similar functionality to brcmfmac. Reviewed-by: Piotr Haber <phaber@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06brcmsmac: radio on led supportPiotr Haber
Add support for radio on led indicator. Control led via BCMA gpio driver. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Piotr Haber <phaber@broadcom.com> [arend@broadcom.com: modify Makefile for conditional compile led.c] Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06mwl8k: Load 8764 firmware imageNishant Sarmukadam
This differs from legacy chips i.e. a 8764 loads firmware image without a helper image b Check interrupt status register for download complete indication. Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06mwl8k: Adding support for 8764 4x4 APNishant Sarmukadam
The patch does the following:- a Add entry in the PCIe table b Add firmware support with API versioning c Reuse most of the 8366 code d Make 8764 specific changes where 8764 differs from 8366 e.g. structure definitions. Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06ath6kl: small cleanup in ath6kl_htc_pipe_rx_complete()Dan Carpenter
It's harmless, but Smatch complains if we use "htc_hdr->eid" before doing the bounds check. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06drivers/net/wireless/ath/wil6210: Makefile, only -Werror when no -W* in ↵Chen Gang
EXTRA_CFLAGS When make with EXTRA_CFLAGS=-W, it will report error. so give a check in Makefile. Signed-off-by: Chen Gang <gang.chen@asianux.com> Acked-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06ath9k: simplify ATH_EP_RNDBob Copeland
Remove the embedded branch to make the ATH_EP_RND macro a little clearer. The new version also generates better code, saving 24 bytes of text: text data bss dec hex filename 87858 1641 24 89523 15db3 ath9k_orig.ko 87834 1641 24 89499 15d9b ath9k_new.ko Although neither version handles negative values particularly well, the lone caller clamps all negative values to zero anyway. I have verified that the results are the same for the range of possible positive rssi values. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06ray_cs: read past the end of the arrayDan Carpenter
"translate" should either be set or disabled. We also use it an offset into the framing[] array when we're generating the proc file. Framing looks like this: static const char *framing[] = { "Encapsulation", "Translation" } So when we're setting translate we need to restrict the values to either 1 or 0 or it can an out of bounds read. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06b43: define BCMA wireless specific PLLsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06bcma: implement disabling PLLsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06wil6210: convert to use simple_open()Wei Yongjun
This removes an open coded simple_open() function and replaces file operations references to the function with simple_open() instead. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06ath5k: cleanup channel to eprom_mode functionJiri Slaby
Stop returning negative values from ath5k_eeprom_mode_from_channel. Yell loudly about that case in that function instead and return the default/zero/mode A. This cleans up the callers, but needs to pass ah down to ath5k_eeprom_mode_from_channel for ATH5K_WARN. For that purpose we also need the declaration to be moved to ath5k.h. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06rndis_wlan: Remove redundant NULL check before kfreeSyam Sidhardhan
kfree on a NULL pointer is a no-op. Signed-off-by: Syam Sidhardhan <s.syam@samsung.com> Acked-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06brcmsmac: export firmware version to ethtoolHauke Mehrtens
This exports the firmware version in use to userspace through ethtool. root@OpenWrt:/# ethtool -i wlan0 firmware-version: 610.812 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>