aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-07-25ata: use module_pci_driverAxel Lin
This patch converts the drivers in drivers/ata/* to use module_pci_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Mikael Pettersson <mikpe@it.uu.se> Cc: Mark Lord <kernel@teksavvy.com> Cc: Jeremy Higdon <jeremy@sgi.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-25drivers/ata/pata_pcmcia.c: adjust suspicious bit operationJulia Lawall
IO_DATA_PATH_WIDTH_8 is 0, so a bit-and with it is always false. The value IO_DATA_PATH_WIDTH covers the bits of the IO_DATA_PATH constants, so first pick those bits and then make the test using !=. This problem was found using Coccinelle (http://coccinelle.lip6.fr/). Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-25pata_imx: Convert to clk_prepare_enable/clk_disable_unprepareFabio Estevam
With the new i.mx clock framework, we need to use clk_prepare_enable/clk_disable_unprepare. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-25ahci: Enable SB600 64bit DMA on MSI K9AGM2 (MS-7327) v2Mark Nelson
Like e65cc194f7628ecaa02462f22f42fb09b50dcd49 (ahci: Enable SB600 64bit DMA on MSI K9A2 Platinum) and 3c4aa91f21f65b7b40bdfb015eacbcb8453ccae2 (ahci: Enable SB600 64bit DMA on Asus M3A), this patch enables 64bit DMA for the AHCI SATA controller of another board that has the SB600 southbridge. In this case though we're enabling 64bit DMA for another MSI motherboard, the K9AGM2 or MS-7327. It is new enough that all of the BIOS releases since the initial release (1.0 from 2007-02-09) work correctly with 64bit DMA enabled. Signed-off-by: Mark Nelson <mdnelson8@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-25[libata] Prevent interface errors with Seagate FreeAgent GoFlexDaniel J Blueman
When using my Seagate FreeAgent GoFlex eSATAp external disk enclosure, interface errors are always seen until 1.5Gbps is negotiated [1]. This occurs using any disk in the enclosure, and when the disk is connected directly with a generic passive eSATAp cable, we see stable 3Gbps operation as expected. Blacklist 3Gbps mode to avoid dataloss and the ~30s delay bus reset and renegotiation incurs. Signed-off-by: Daniel J Blueman <daniel@quora.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-25drivers/acpi/glue: revert accidental license-related 6b66d95895c bitsJeff Garzik
Commit 6b66d95895c149cbc04d4fac5a2f5477c543a8ae should not have changed EXPORT_SYMBOL_GPL to EXPORT_SYMBOL. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-25libata-acpi: add missing inlines in libata.hLin Ming
Adds inline for ata_acpi_unregister/ata_acpi_bind/ata_acpi_unbind in drivers/ata/libata.h for !CONFIG_ATA_ACPI to fix below warnings. warning: 'ata_acpi_unregister' defined but not used [-Wunused-function] warning: 'ata_acpi_bind' defined but not used [-Wunused-function] warning: 'ata_acpi_unbind' defined but not used [-Wunused-function] Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-06-29libata: tell scsi layer device supports runtime power offAaron Lu
If ATA device supports "Device Attention", then tell scsi layer that the device supports runtime power off. Signed-off-by: Aaron Lu <aaron.lu@amd.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-06-29libata: detect Device Attention supportLin Ming
Add a new flag ATA_DFLAG_DA to indicate that device supports "Device Attention". Acked-by: Aaron Lu <aaron.lu@amd.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-06-29libata-acpi: register/unregister device to/from power resourceLin Ming
Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-06-29libata-acpi: add ata port runtime D3Cold supportLin Ming
ATA port may support runtime D3Cold state, for example, Zero-power ODD case. This patch adds wakeup notifier and enable/disable run_wake during supend/resume. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-06-29libata-acpi: set acpi state for SATA portLin Ming
Currently, ata_acpi_set_state() only sets acpi sate for IDE port. Remove this limitation. Acked-by: Aaron Lu <aaron.lu@amd.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-06-29libata: migrate ACPI code over to new bindingsMatthew Garrett
Now that we have the ability to directly glue the ACPI namespace to the driver model in libata, we don't need the custom code to handle the same thing. Remove it and migrate the functions over to the new code. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Holger Macht <holger@homac.de> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-06-29libata: bind the Linux device tree to the ACPI device treeMatthew Garrett
Associate the ACPI device tree and libata devices. This patch uses the generic ACPI glue framework to do so. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Holger Macht <holger@homac.de> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-06-29[SCSI] add wrapper to access and set scsi_bus_type in struct acpi_bus_typeHolger Macht
For being able to bind ata devices against acpi devices, scsi_bus_type needs to be set as bus in struct acpi_bus_type. So add wrapper to scsi_lib to accomplish that. Signed-off-by: Holger Macht <holger@homac.de> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-06-28Merge tag 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon changes from Guenter Roeck: "Just e-mail address updates" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: Update my e-mail address hwmon: (applesmc) correct email address for Jesper Juhl
2012-06-28Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds
Pull watchdog fixes from Wim Van Sebroeck: "This fixes: - the WDIOC_GETSTATUS return value - the unregister of all NMI events on exit - the loading of the iTCO_wdt driver after the conversion to the lpc_ich mfd model." * git://www.linux-watchdog.org/linux-watchdog: watchdog: core: fix WDIOC_GETSTATUS return value watchdog: hpwdt: Unregister NMI events on exit. watchdog: iTCO_wdt: add platform driver module alias
2012-06-28Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull UDF fixes from Jan Kara: "Make UDF more robust in presence of corrupted filesystem" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: Fortify loading of sparing table udf: Avoid run away loop when partition table length is corrupted udf: Use 'ret' instead of abusing 'i' in udf_load_logicalvol()
2012-06-28Merge tag 'upstream-3.5-rc5' of git://git.infradead.org/linux-ubifsLinus Torvalds
Pull ubi/ubifs fixes from Artem Bityutskiy: "Fix the debugfs regression - we never enable it because incorrect 'IS_ENABLED()' macro usage: should be 'IS_ENABLED(CONFIG_DEBUG_FS)', but we had 'IS_ENABLED(DEBUG_FS)'. Also fix incorrect assertion." * tag 'upstream-3.5-rc5' of git://git.infradead.org/linux-ubifs: UBI: correct usage of IS_ENABLED() UBIFS: correct usage of IS_ENABLED() UBIFS: fix assertion
2012-06-28watchdog: core: fix WDIOC_GETSTATUS return valueWim Van Sebroeck
In commit 7a87982420e5e126bfefeb42232d1fd92052794e we added a wrapper for the WDIOC_GETSTATUS ioctl call. The code results however in a different behaviour: it returns an error if the driver doesn't support the status operation. This is not according to the API that says that when we don't support the status operation, that we just should return a 0 value. Only when the device isn't there anymore, we should return an error. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-06-28watchdog: hpwdt: Unregister NMI events on exit.Mingarelli, Thomas
This patch is to unregister for NMI events upon exit. Also we are now making the default setting for allow_kdump enabled. Signed-off-by: Thomas Mingarelli <thomas.mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-06-28watchdog: iTCO_wdt: add platform driver module aliasJan Beulich
The recent conversion of iTCO_wdt resulted in the driver no longer getting loaded automatically, since it no longer has a MODULE_DEVICE_TABLE() included. As the lpc_ich driver now creates a platform device, auto-loading can easily be done by having a respective module alias in place. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Aaron Sierra <asierra@xes-inc.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-06-28Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Nearly all intel, one missing license header in nouveau, nothing majorly earth shattering." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: Revert "drm/i915: allow PCH PWM override on IVB" drm/nouveau: add license header to prime. drm/i915: Fix eDP blank screen after S3 resume on HP desktops drm/i915: rip out the PM_IIR WARN
2012-06-28Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds
Pull SuperH fixes from Paul Mundt. * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: sh: Convert sh_clk_mstp32_register to sh_clk_mstp_register sh: kfr2r09: fix compile breakage
2012-06-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking update from David Miller: 1) Pairing and deadlock fixes in bluetooth from Johan Hedberg. 2) Add device IDs for AR3011 and AR3012 bluetooth chips. From Giancarlo Formicuccia and Marek Vasut. 3) Fix wireless regulatory deadlock, from Eliad Peller. 4) Fix full TX ring panic in bnx2x driver, from Eric Dumazet. 5) Revert the two commits that added skb_orphan_try(), it causes erratic bonding behavior with UDP clients and the gains it used to give are mostly no longer happening due to how BQL works. From Eric Dumazet. 6) It took two tries, but Thomas Graf fixed a problem wherein we registered ipv6 routing procfs files before their backend data were initialized properly. 7) Fix max GSO size setting in be2net, from Sarveshwar Bandi. 8) PHY device id mask is wrong for KSZ9021 and KS8001 chips, fix from Jason Wang. 9) Fix use of stale SKB data pointer after skb_linearize() call in batman-adv, from Antonio Quartulli. 10) Fix memory leak in IXGBE due to missing __GFP_COMP, from Alexander Duyck. 11) Fix probing of Gobi devices in qmi_wwan usbnet driver, from Bjørn Mork. 12) Fix suspend/resume and open failure handling in usbnet from Ming Lei. 13) Attempt to fix device r8169 hangs for certain chips, from Francois Romieu. 14) Fix advancement of RX dirty pointer in some situations in sh_eth driver, from Yoshihiro Shimoda. 15) Attempt to fix restart of IPV6 routing table dumps when there is an intervening table update. From Eric Dumazet. 16) Respect security_inet_conn_request() return value in ipv6 TCP. From Neal Cardwell. 17) Add another iPAD device ID to ipheth driver, from Davide Gerhard. 18) Fix access to freed SKB in l2tp_eth_dev_xmit(), and fix l2tp lockdep splats, from Eric Dumazet. 19) Make sure all bridge devices, regardless of whether they were created via netlink or ioctls, have their rtnetlink ops hooked up. From Thomas Graf and Stephen Hemminger. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits) 9p: fix min_t() casting in p9pdu_vwritef() can: flexcan: use be32_to_cpup to handle the value of dt entry xen/netfront: teardown the device before unregistering it. bridge: Assign rtnl_link_ops to bridge devices created via ioctl (v2) vhost: use USER_DS in vhost_worker thread ixgbe: Do not pad FCoE frames as this can cause issues with FCoE DDP net: l2tp_eth: use LLTX to avoid LOCKDEP splats mac802154: add missed braces net: l2tp_eth: fix l2tp_eth_dev_xmit race net/mlx4_en: Release QP range in free_resources net/mlx4: Use single completion vector after NOP failure net/mlx4_en: Set correct port parameters during device initialization ipheth: add support for iPad caif-hsi: Add missing return in error path caif-hsi: Bugfix - Piggyback'ed embedded CAIF frame lost caif: Clear shutdown mask to zero at reconnect. tcp: heed result of security_inet_conn_request() in tcp_v6_conn_request() ipv6: fib: fix fib dump restart batman-adv: fix race condition in TT full-table replacement batman-adv: only drop packets of known wifi clients ...
2012-06-28udf: Fortify loading of sparing tableJan Kara
Add sanity checks when loading sparing table from disk to avoid accessing unallocated memory or writing to it. Signed-off-by: Jan Kara <jack@suse.cz>
2012-06-28udf: Avoid run away loop when partition table length is corruptedJan Kara
Check provided length of partition table so that (possibly maliciously) corrupted partition table cannot cause accessing data beyond current buffer. Signed-off-by: Jan Kara <jack@suse.cz>
2012-06-28udf: Use 'ret' instead of abusing 'i' in udf_load_logicalvol()Jan Kara
Signed-off-by: Jan Kara <jack@suse.cz>
2012-06-28Merge branches 'sh/urgent' and 'sh/trivial' into sh-fixes-for-linusPaul Mundt
2012-06-28sh: Convert sh_clk_mstp32_register to sh_clk_mstp_registerNobuhiro Iwamatsu
sh_clk_mstp32_register is deprecated. This convert to sh_clk_mstp_register. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-06-28sh: kfr2r09: fix compile breakageGuennadi Liakhovetski
Fix compile breakage caused by commit aa82f9fcd0062782dcbe29a2c820ba7c04dbe572 Author: Paul Mundt <lethal@linux-sh.org> sh: kfr2r09 evt2irq migration. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-06-27Merge branch 'for-davem' of git://gitorious.org/linux-can/linux-canDavid S. Miller
Marc Kleine-Budde says: ==================== here's a patch intended for v3.5, targeting net/master. Hui Wang has found and fixed an endianness problem in the device tree handling in the flexcan driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-279p: fix min_t() casting in p9pdu_vwritef()Dan Carpenter
I don't think we're actually likely to hit this limit but if we do then the comparison should be done as size_t. The original code is equivalent to: len = strlen(sptr) % USHRT_MAX; Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27Merge tag 'usb-3.5-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg Kroah-Hartman: "Here are some small USB gadget bugfixes, and a few new USB device ids added to some drivers for the 3.5-rc5 release. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'usb-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: CP210x Add 10 Device IDs USB: option: Add USB ID for Novatel Ovation MC551 usb: phy: Fix Kconfig dependency for Phy drivers usb-storage: revert commit afff07e61a52 (Add 090c:1000 to unusal-devs) SCSI & usb-storage: add try_rc_10_first flag usb: musb: host: release dma channels if no active io usb: gadget: lpc32xx_udc: fix build error with debugfs enabled usb: otg: twl6030-usb: Fix twl writes USB: option: add id for Cellient MEN-200 usb: dwc3: fix giveback of queued request in ep_dequeue usb: gadget: Complete fsl qe/udc driver conversion
2012-06-27Merge tag 'sound-3.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Here you find quite a few changes for HD-audio and a copule of quirk additions for USB-audio. All reasonably small and/or trivial." * tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Fix power-map regression for HP dv6 & co ALSA: hda - Initialize caches at codec reconfiguration ALSA: hda - Fix memory leaks at module unload ALSA: hda - Fix memory leaks in Realtek & Conexant codec parsers ALSA: hda - Add Realtek ALC280 codec support ALSA: hda - Remove obsoleted CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS ASoC: wm8994: remove duplicate code ALSA: usb-audio: add BOSS GT-100 support ALSA: HDA: Add inverted internal mic quirk for Lenovo S205 ALSA: hda - Fix ALC272X codec detection ALSA: snd_usb_audio: ignore ctrl errors on QuickCam Pro for Notebooks ALSA: snd_usb_audio: ignore ctrl errors on QuickCam E3500
2012-06-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull a m68knommu fix from Greg Ungerer: "It contains a single fix for breakage using the Freescale FEC eth driver on ColdFire CPUs." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: define a local devm_clk_get() function
2012-06-27Merge tag 'mmc-fixes-for-3.5-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC fixes from Chris Ball: - omap_hsmmc: Using AUTO_CMD12 (enabled by default in 3.5-rc1) has been found to cause data corruption on the BeagleBoard, but no other OMAP boards so far. Revert the patch until there's a root cause explanation that makes sense, at which point we might decide to use a blacklist or whitelist. - mmc_block: Fix incorrect data timeouts for the case of multiblock (ACMD22) writes for block-addressed cards. * tag 'mmc-fixes-for-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: Revert "mmc: omap_hsmmc: Enable Auto CMD12" mmc: block: fix the data timeout issue with ACMD22
2012-06-27Merge tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linuxLinus Torvalds
Pull clk common framework fixes from Mike Turquette: "This contains three NULL pointer fixes and two device regression fixups. Two NULL pointer dereferences were in the common clk core due to lack of sanity checking and the third NPD was in the mxs-specific clock code due to incorrect use of __initdata. The device regressions were the result of improper data: a wrong string name for matching DT data broke the SPEAr ethernet controller and another string matching problem in the mxs clock data resulted in a broken MMC controller." * tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux: clk: mxs: fix clock lookup after freeing init memory clk: mxs: fix ref_io clock definition clk: Check parent for NULL in clk_change_rate clk: Allow late cache allocation for clk->parents clk: SPEAr600: Fix ethernet clock name for DT based probing
2012-06-27chmod +x scripts/gfp-translateDave Jones
This script lacks an executable bit. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-27Merge branch 'drm-intel-fixes' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Daniel writes: "Two tiny patches and one revert: - Kill a bogus error message introduced in 3.4, further Bspec reading indicates that this is how the hw is supposed to work. - Reorder one backlight register restore, fixing broken backlight on some machines after resume. - Revert a hack from Jesse for ivb backlight control - it breaks the backlight controls on my shiny new ivb laptop." * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: Revert "drm/i915: allow PCH PWM override on IVB" drm/i915: Fix eDP blank screen after S3 resume on HP desktops drm/i915: rip out the PM_IIR WARN
2012-06-27Revert "drm/i915: allow PCH PWM override on IVB"Daniel Vetter
This reverts commit f82cfb6bcda164ef3a66b8c3fc549b1f9bdd09ad. This breaks the backlight controls on my IVB asus zenbook with an eDP panel. I guess the right fix would be to read this bit and use either the pch or the cpu register to frob the backlight values. But that is stuff for -next. Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-27UBI: correct usage of IS_ENABLED()Brian Norris
Commit "e9b4cf2 UBI: fix debugfs-less systems support" fixed one regression but introduced a different regression - the debugfs is now always compiled out. Root cause: IS_ENABLED() arguments should be used with the CONFIG_* prefix. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-06-27UBIFS: correct usage of IS_ENABLED()Brian Norris
Commit "818039c UBIFS: fix debugfs-less systems support" fixed one regression but introduced a different regression - the debugfs is now always compiled out. Root cause: IS_ENABLED() arguments should be used with the CONFIG_* prefix. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-06-27can: flexcan: use be32_to_cpup to handle the value of dt entryHui Wang
The freescale arm i.MX series platform can support this driver, and usually the arm cpu works in the little endian mode by default, while device tree entry value is stored in big endian format, we should use be32_to_cpup() to handle them, after modification, it can work well both on the le cpu and be cpu. Cc: stable <stable@vger.kernel.org> # v3.2+ Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Hui Wang <jason77.wang@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-06-27drm/nouveau: add license header to prime.Dave Airlie
Just forgot this when I posted it, and yes I'm the only person to have changed the file since. Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-27xen/netfront: teardown the device before unregistering it.Ian Campbell
Fixes: [ 15.470311] WARNING: at /local/scratch/ianc/devel/kernels/linux/fs/sysfs/file.c:498 sysfs_attr_ns+0x95/0xa0() [ 15.470326] sysfs: kobject eth0 without dirent [ 15.470333] Modules linked in: [ 15.470342] Pid: 12, comm: xenwatch Not tainted 3.4.0-x86_32p-xenU #93 and [ 9.150554] BUG: unable to handle kernel paging request at 2b359000 [ 9.150577] IP: [<c1279561>] linkwatch_do_dev+0x81/0xc0 [ 9.150592] *pdpt = 000000002c3c9027 *pde = 0000000000000000 [ 9.150604] Oops: 0002 [#1] SMP [ 9.150613] Modules linked in: This is http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=675190 Reported-by: George Shuklin <george.shuklin@gmail.com> Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Tested-by: William Dauchy <wdauchy@gmail.com> Cc: stable@kernel.org Cc: 675190@bugs.debian.org Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-26bridge: Assign rtnl_link_ops to bridge devices created via ioctl (v2)stephen hemminger
This ensures that bridges created with brctl(8) or ioctl(2) directly also carry IFLA_LINKINFO when dumped over netlink. This also allows to create a bridge with ioctl(2) and delete it with RTM_DELLINK. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-26vhost: use USER_DS in vhost_worker threadJens Freimann
On some architectures address spaces are set up in a way that this is not necessary to work properly but on some others (like s390) it is. Make sure we operate on the user address space to allow copy_xxx_user() from the vhost_worker() thread by setting it explicitly before calling use_mm() and revert it after unuse_mm(). Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-26ixgbe: Do not pad FCoE frames as this can cause issues with FCoE DDPAlexander Duyck
FCoE target mode was experiencing issues due to the fact that we were sending up data frames that were padded to 60 bytes after the DDP logic had already stripped the frame down to 52 or 56 depending on the use of VLANs. This was resulting in the FCoE DDP logic having issues since it thought the frame still had data in it due to the padding. To resolve this, adding code so that we do not pad FCoE frames prior to handling them to the stack. CC: <stable@vger.kernel.org> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-26net: l2tp_eth: use LLTX to avoid LOCKDEP splatsEric Dumazet
Denys Fedoryshchenko reported a LOCKDEP issue with l2tp code. [ 8683.927442] ====================================================== [ 8683.927555] [ INFO: possible circular locking dependency detected ] [ 8683.927672] 3.4.1-build-0061 #14 Not tainted [ 8683.927782] ------------------------------------------------------- [ 8683.927895] swapper/0/0 is trying to acquire lock: [ 8683.928007] (slock-AF_INET){+.-...}, at: [<e0fc73ec>] l2tp_xmit_skb+0x173/0x47e [l2tp_core] [ 8683.928121] [ 8683.928121] but task is already holding lock: [ 8683.928121] (_xmit_ETHER#2){+.-...}, at: [<c02f062d>] sch_direct_xmit+0x36/0x119 [ 8683.928121] [ 8683.928121] which lock already depends on the new lock. [ 8683.928121] [ 8683.928121] [ 8683.928121] the existing dependency chain (in reverse order) is: [ 8683.928121] [ 8683.928121] -> #1 (_xmit_ETHER#2){+.-...}: [ 8683.928121] [<c015a561>] lock_acquire+0x71/0x85 [ 8683.928121] [<c034da2d>] _raw_spin_lock+0x33/0x40 [ 8683.928121] [<c0304e0c>] ip_send_reply+0xf2/0x1ce [ 8683.928121] [<c0317dbc>] tcp_v4_send_reset+0x153/0x16f [ 8683.928121] [<c0317f4a>] tcp_v4_do_rcv+0x172/0x194 [ 8683.928121] [<c031929b>] tcp_v4_rcv+0x387/0x5a0 [ 8683.928121] [<c03001d0>] ip_local_deliver_finish+0x13a/0x1e9 [ 8683.928121] [<c0300645>] NF_HOOK.clone.11+0x46/0x4d [ 8683.928121] [<c030075b>] ip_local_deliver+0x41/0x45 [ 8683.928121] [<c03005dd>] ip_rcv_finish+0x31a/0x33c [ 8683.928121] [<c0300645>] NF_HOOK.clone.11+0x46/0x4d [ 8683.928121] [<c0300960>] ip_rcv+0x201/0x23d [ 8683.928121] [<c02de91b>] __netif_receive_skb+0x329/0x378 [ 8683.928121] [<c02deae8>] netif_receive_skb+0x4e/0x7d [ 8683.928121] [<e08d5ef3>] rtl8139_poll+0x243/0x33d [8139too] [ 8683.928121] [<c02df103>] net_rx_action+0x90/0x15d [ 8683.928121] [<c012b2b5>] __do_softirq+0x7b/0x118 [ 8683.928121] [ 8683.928121] -> #0 (slock-AF_INET){+.-...}: [ 8683.928121] [<c0159f1b>] __lock_acquire+0x9a3/0xc27 [ 8683.928121] [<c015a561>] lock_acquire+0x71/0x85 [ 8683.928121] [<c034da2d>] _raw_spin_lock+0x33/0x40 [ 8683.928121] [<e0fc73ec>] l2tp_xmit_skb+0x173/0x47e [l2tp_core] [ 8683.928121] [<e0fe31fb>] l2tp_eth_dev_xmit+0x1a/0x2f [l2tp_eth] [ 8683.928121] [<c02e01e7>] dev_hard_start_xmit+0x333/0x3f2 [ 8683.928121] [<c02f064c>] sch_direct_xmit+0x55/0x119 [ 8683.928121] [<c02e0528>] dev_queue_xmit+0x282/0x418 [ 8683.928121] [<c031f4fb>] NF_HOOK.clone.19+0x45/0x4c [ 8683.928121] [<c031f524>] arp_xmit+0x22/0x24 [ 8683.928121] [<c031f567>] arp_send+0x41/0x48 [ 8683.928121] [<c031fa7d>] arp_process+0x289/0x491 [ 8683.928121] [<c031f4fb>] NF_HOOK.clone.19+0x45/0x4c [ 8683.928121] [<c031f7a0>] arp_rcv+0xb1/0xc3 [ 8683.928121] [<c02de91b>] __netif_receive_skb+0x329/0x378 [ 8683.928121] [<c02de9d3>] process_backlog+0x69/0x130 [ 8683.928121] [<c02df103>] net_rx_action+0x90/0x15d [ 8683.928121] [<c012b2b5>] __do_softirq+0x7b/0x118 [ 8683.928121] [ 8683.928121] other info that might help us debug this: [ 8683.928121] [ 8683.928121] Possible unsafe locking scenario: [ 8683.928121] [ 8683.928121] CPU0 CPU1 [ 8683.928121] ---- ---- [ 8683.928121] lock(_xmit_ETHER#2); [ 8683.928121] lock(slock-AF_INET); [ 8683.928121] lock(_xmit_ETHER#2); [ 8683.928121] lock(slock-AF_INET); [ 8683.928121] [ 8683.928121] *** DEADLOCK *** [ 8683.928121] [ 8683.928121] 3 locks held by swapper/0/0: [ 8683.928121] #0: (rcu_read_lock){.+.+..}, at: [<c02dbc10>] rcu_lock_acquire+0x0/0x30 [ 8683.928121] #1: (rcu_read_lock_bh){.+....}, at: [<c02dbc10>] rcu_lock_acquire+0x0/0x30 [ 8683.928121] #2: (_xmit_ETHER#2){+.-...}, at: [<c02f062d>] sch_direct_xmit+0x36/0x119 [ 8683.928121] [ 8683.928121] stack backtrace: [ 8683.928121] Pid: 0, comm: swapper/0 Not tainted 3.4.1-build-0061 #14 [ 8683.928121] Call Trace: [ 8683.928121] [<c034bdd2>] ? printk+0x18/0x1a [ 8683.928121] [<c0158904>] print_circular_bug+0x1ac/0x1b6 [ 8683.928121] [<c0159f1b>] __lock_acquire+0x9a3/0xc27 [ 8683.928121] [<c015a561>] lock_acquire+0x71/0x85 [ 8683.928121] [<e0fc73ec>] ? l2tp_xmit_skb+0x173/0x47e [l2tp_core] [ 8683.928121] [<c034da2d>] _raw_spin_lock+0x33/0x40 [ 8683.928121] [<e0fc73ec>] ? l2tp_xmit_skb+0x173/0x47e [l2tp_core] [ 8683.928121] [<e0fc73ec>] l2tp_xmit_skb+0x173/0x47e [l2tp_core] [ 8683.928121] [<e0fe31fb>] l2tp_eth_dev_xmit+0x1a/0x2f [l2tp_eth] [ 8683.928121] [<c02e01e7>] dev_hard_start_xmit+0x333/0x3f2 [ 8683.928121] [<c02f064c>] sch_direct_xmit+0x55/0x119 [ 8683.928121] [<c02e0528>] dev_queue_xmit+0x282/0x418 [ 8683.928121] [<c02e02a6>] ? dev_hard_start_xmit+0x3f2/0x3f2 [ 8683.928121] [<c031f4fb>] NF_HOOK.clone.19+0x45/0x4c [ 8683.928121] [<c031f524>] arp_xmit+0x22/0x24 [ 8683.928121] [<c02e02a6>] ? dev_hard_start_xmit+0x3f2/0x3f2 [ 8683.928121] [<c031f567>] arp_send+0x41/0x48 [ 8683.928121] [<c031fa7d>] arp_process+0x289/0x491 [ 8683.928121] [<c031f7f4>] ? __neigh_lookup.clone.20+0x42/0x42 [ 8683.928121] [<c031f4fb>] NF_HOOK.clone.19+0x45/0x4c [ 8683.928121] [<c031f7a0>] arp_rcv+0xb1/0xc3 [ 8683.928121] [<c031f7f4>] ? __neigh_lookup.clone.20+0x42/0x42 [ 8683.928121] [<c02de91b>] __netif_receive_skb+0x329/0x378 [ 8683.928121] [<c02de9d3>] process_backlog+0x69/0x130 [ 8683.928121] [<c02df103>] net_rx_action+0x90/0x15d [ 8683.928121] [<c012b2b5>] __do_softirq+0x7b/0x118 [ 8683.928121] [<c012b23a>] ? local_bh_enable+0xd/0xd [ 8683.928121] <IRQ> [<c012b4d0>] ? irq_exit+0x41/0x91 [ 8683.928121] [<c0103c6f>] ? do_IRQ+0x79/0x8d [ 8683.928121] [<c0157ea1>] ? trace_hardirqs_off_caller+0x2e/0x86 [ 8683.928121] [<c034ef6e>] ? common_interrupt+0x2e/0x34 [ 8683.928121] [<c0108a33>] ? default_idle+0x23/0x38 [ 8683.928121] [<c01091a8>] ? cpu_idle+0x55/0x6f [ 8683.928121] [<c033df25>] ? rest_init+0xa1/0xa7 [ 8683.928121] [<c033de84>] ? __read_lock_failed+0x14/0x14 [ 8683.928121] [<c0498745>] ? start_kernel+0x303/0x30a [ 8683.928121] [<c0498209>] ? repair_env_string+0x51/0x51 [ 8683.928121] [<c04980a8>] ? i386_start_kernel+0xa8/0xaf It appears that like most virtual devices, l2tp should be converted to LLTX mode. This patch takes care of statistics using atomic_long in both RX and TX paths, and fix a bug in l2tp_eth_dev_recv(), which was caching skb->data before a pskb_may_pull() call. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Denys Fedoryshchenko <denys@visp.net.lb> Cc: James Chapman <jchapman@katalix.com> Cc: Hong zhi guo <honkiko@gmail.com> Cc: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-25 03:54:48 +0000