aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-09-28drm/msm: Odd PTR_ERR usageThomas Meyer
The variable priv->kms is not initialized yet. Found by "scripts/coccinelle/tests/odd_ptr_err.cocci". PTR_ERR should access the value just tested by IS_ERR. Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
2013-09-22Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: - some small fixes for msm and exynos - a regression revert affecting nouveau users with old userspace - intel pageflip deadlock and gpu hang fixes, hsw modesetting hangs * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (22 commits) Revert "drm: mark context support as a legacy subsystem" drm/i915: Don't enable the cursor on a disable pipe drm/i915: do not update cursor in crtc mode set drm/exynos: fix return value check in lowlevel_buffer_allocate() drm/exynos: Fix address space warnings in exynos_drm_fbdev.c drm/exynos: Fix address space warning in exynos_drm_buf.c drm/exynos: Remove redundant OF dependency drm/msm: drop unnecessary set_need_resched() drm/i915: kill set_need_resched drm/msm: fix potential NULL pointer dereference drm/i915/dvo: set crtc timings again for panel fixed modes drm/i915/sdvo: Robustify the dtd<->drm_mode conversions drm/msm: workaround for missing irq drm/msm: return -EBUSY if bo still active drm/msm: fix return value check in ERR_PTR() drm/msm: fix cmdstream size check drm/msm: hangcheck harder drm/msm: handle read vs write fences drm/i915/sdvo: Fully translate sync flags in the dtd->mode conversion drm/i915: Use proper print format for debug prints ...
2013-09-22Merge branch 'for-3.12/core' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block IO fixes from Jens Axboe: "After merge window, no new stuff this time only a collection of neatly confined and simple fixes" * 'for-3.12/core' of git://git.kernel.dk/linux-block: cfq: explicitly use 64bit divide operation for 64bit arguments block: Add nr_bios to block_rq_remap tracepoint If the queue is dying then we only call the rq->end_io callout. This leaves bios setup on the request, because the caller assumes when the blk_execute_rq_nowait/blk_execute_rq call has completed that the rq->bios have been cleaned up. bio-integrity: Fix use of bs->bio_integrity_pool after free blkcg: relocate root_blkg setting and clearing block: Convert kmalloc_node(...GFP_ZERO...) to kzalloc_node(...) block: trace all devices plug operation
2013-09-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "These are mostly bug fixes and a two small performance fixes. The most important of the bunch are Josef's fix for a snapshotting regression and Mark's update to fix compile problems on arm" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (25 commits) Btrfs: create the uuid tree on remount rw btrfs: change extent-same to copy entire argument struct Btrfs: dir_inode_operations should use btrfs_update_time also btrfs: Add btrfs: prefix to kernel log output btrfs: refuse to remount read-write after abort Btrfs: btrfs_ioctl_default_subvol: Revert back to toplevel subvolume when arg is 0 Btrfs: don't leak transaction in btrfs_sync_file() Btrfs: add the missing mutex unlock in write_all_supers() Btrfs: iput inode on allocation failure Btrfs: remove space_info->reservation_progress Btrfs: kill delay_iput arg to the wait_ordered functions Btrfs: fix worst case calculator for space usage Revert "Btrfs: rework the overcommit logic to be based on the total size" Btrfs: improve replacing nocow extents Btrfs: drop dir i_size when adding new names on replay Btrfs: replay dir_index items before other items Btrfs: check roots last log commit when checking if an inode has been logged Btrfs: actually log directory we are fsync()'ing Btrfs: actually limit the size of delalloc range Btrfs: allocate the free space by the existed max extent size when ENOSPC ...
2013-09-22cfq: explicitly use 64bit divide operation for 64bit argumentsAnatol Pomozov
'samples' is 64bit operant, but do_div() second parameter is 32. do_div silently truncates high 32 bits and calculated result is invalid. In case if low 32bit of 'samples' are zeros then do_div() produces kernel crash. Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-09-21Merge tag 'nfs-for-3.12-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client bugfix from Trond Myklebust: "Fix a regression due to incorrect sharing of gss auth caches" * tag 'nfs-for-3.12-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: RPCSEC_GSS: fix crash on destroying gss auth
2013-09-21block: Add nr_bios to block_rq_remap tracepointJun'ichi Nomura
Adding the number of bios in a remapped request to 'block_rq_remap' tracepoint. Request remapper clones bios in a request to track the completion status of each bio. So the number of bios can be useful information for investigation. Related discussions: http://www.redhat.com/archives/dm-devel/2013-August/msg00084.html http://www.redhat.com/archives/dm-devel/2013-September/msg00024.html Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-09-21Btrfs: create the uuid tree on remount rwJosef Bacik
Users have been complaining of the uuid tree stuff warning that there is no uuid root when trying to do snapshot operations. This is because if you mount -o ro we will not create the uuid tree. But then if you mount -o rw,remount we will still not create it and then any subsequent snapshot/subvol operations you try to do will fail gloriously. Fix this by creating the uuid_root on remount rw if it was not already there. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-09-21btrfs: change extent-same to copy entire argument structMark Fasheh
btrfs_ioctl_file_extent_same() uses __put_user_unaligned() to copy some data back to it's argument struct. Unfortunately, not all architectures provide __put_user_unaligned(), so compiles break on them if btrfs is selected. Instead, just copy the whole struct in / out at the start and end of operations, respectively. Signed-off-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-09-21Btrfs: dir_inode_operations should use btrfs_update_time alsoGuangyu Sun
Commit 2bc5565286121d2a77ccd728eb3484dff2035b58 (Btrfs: don't update atime on RO subvolumes) ensures that the access time of an inode is not updated when the inode lives in a read-only subvolume. However, if a directory on a read-only subvolume is accessed, the atime is updated. This results in a write operation to a read-only subvolume. I believe that access times should never be updated on read-only subvolumes. To reproduce: # mkfs.btrfs -f /dev/dm-3 (...) # mount /dev/dm-3 /mnt # btrfs subvol create /mnt/sub Create subvolume '/mnt/sub' # mkdir /mnt/sub/dir # echo "abc" > /mnt/sub/dir/file # btrfs subvol snapshot -r /mnt/sub /mnt/rosnap Create a readonly snapshot of '/mnt/sub' in '/mnt/rosnap' # stat /mnt/rosnap/dir File: `/mnt/rosnap/dir' Size: 8 Blocks: 0 IO Block: 4096 directory Device: 16h/22d Inode: 257 Links: 1 Access: (0755/drwxr-xr-x) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2013-09-11 07:21:49.389157126 -0400 Modify: 2013-09-11 07:22:02.330156079 -0400 Change: 2013-09-11 07:22:02.330156079 -0400 # ls /mnt/rosnap/dir file # stat /mnt/rosnap/dir File: `/mnt/rosnap/dir' Size: 8 Blocks: 0 IO Block: 4096 directory Device: 16h/22d Inode: 257 Links: 1 Access: (0755/drwxr-xr-x) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2013-09-11 07:22:56.797151670 -0400 Modify: 2013-09-11 07:22:02.330156079 -0400 Change: 2013-09-11 07:22:02.330156079 -0400 Reported-by: Koen De Wit <koen.de.wit@oracle.com> Signed-off-by: Guangyu Sun <guangyu.sun@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-09-21btrfs: Add btrfs: prefix to kernel log outputFrank Holton
The kernel log entries for device label %s and device fsid %pU are missing the btrfs: prefix. Add those here. Signed-off-by: Frank Holton <fholton@gmail.com> Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-09-21btrfs: refuse to remount read-write after abortDavid Sterba
It's still possible to flip the filesystem into RW mode after it's remounted RO due to an abort. There are lots of places that check for the superblock error bit and will not write data, but we should not let the filesystem appear read-write. Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-09-21Btrfs: btrfs_ioctl_default_subvol: Revert back to toplevel subvolume when ↵chandan
arg is 0 This patch makes it possible to set BTRFS_FS_TREE_OBJECTID as the default subvolume by passing a subvolume id of 0. Signed-off-by: chandan <chandan@linux.vnet.ibm.com> Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-09-21Btrfs: don't leak transaction in btrfs_sync_file()Filipe David Borba Manana
In btrfs_sync_file(), if the call to btrfs_log_dentry_safe() returns a negative error (for e.g. -ENOMEM via btrfs_log_inode()), we would return without ending/freeing the transaction. Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-09-21Btrfs: add the missing mutex unlock in write_all_supers()Stefan Behrens
The BUG() was replaced by btrfs_error() and return -EIO with the patch "get rid of one BUG() in write_all_supers()", but the missing mutex_unlock() was overlooked. The 0-DAY kernel build service from Intel reported the missing unlock which was found by the coccinelle tool: fs/btrfs/disk-io.c:3422:2-8: preceding lock on line 3374 Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-09-21Btrfs: iput inode on allocation failureJosef Bacik
We don't do the iput when we fail to allocate our delayed delalloc work in __start_delalloc_inodes, fix this. Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-09-21Btrfs: remove space_info->reservation_progressJosef Bacik
This isn't used for anything anymore, just remove it. Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-09-21Btrfs: kill delay_iput arg to the wait_ordered functionsJosef Bacik
This is a left over of how we used to wait for ordered extents, which was to grab the inode and then run filemap flush on it. However if we have an ordered extent then we already are holding a ref on the inode, and we just use btrfs_start_ordered_extent anyway, so there is no reason to have an extra ref on the inode to start work on the ordered extent. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-09-21Btrfs: fix worst case calculator for space usageJosef Bacik
Forever ago I made the worst case calculator say that we could potentially split into 3 blocks for every level on the way down, which isn't right. If we split we're only going to get two new blocks, the one we originally cow'ed and the new one we're going to split. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-09-21Revert "Btrfs: rework the overcommit logic to be based on the total size"Josef Bacik
This reverts commit 70afa3998c9baed4186df38988246de1abdab56d. It is causing performance issues and wasn't actually correct. There were problems with the way we flushed delalloc and that was the real cause of the early enospc. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-09-21Btrfs: improve replacing nocow extentsJosef Bacik
Various people have hit a deadlock when running btrfs/011. This is because when replacing nocow extents we will take the i_mutex to make sure nobody messes with the file while we are replacing the extent. The problem is we are already holding a transaction open, which is a locking inversion, so instead we need to save these inodes we find and then process them outside of the transaction. Further we can't just lock the inode and assume we are good to go. We need to lock the extent range and then read back the extent cache for the inode to make sure the extent really still points at the physical block we want. If it doesn't we don't have to copy it. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-09-21Btrfs: drop dir i_size when adding new names on replayJosef Bacik
So if we have dir_index items in the log that means we also have the inode item as well, which means that the inode's i_size is correct. However when we process dir_index'es we call btrfs_add_link() which will increase the directory's i_size for the new entry. To fix this we need to just set the dir items i_size to 0, and then as we find dir_index items we adjust the i_size. btrfs_add_link() will do it for new entries, and if the entry already exists we can just add the name_len to the i_size ourselves. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-09-21Btrfs: replay dir_index items before other itemsJosef Bacik
A user reported a bug where his log would not replay because he was getting -EEXIST back. This was because he had a file moved into a directory that was logged. What happens is the file had a lower inode number, and so it is processed first when replaying the log, and so we add the inode ref in for the directory it was moved to. But then we process the directories DIR_INDEX item and try to add the inode ref for that inode and it fails because we already added it when we replayed the inode. To solve this problem we need to just process any DIR_INDEX items we have in the log first so this all is taken care of, and then we can replay the rest of the items. With this patch my reproducer can remount the file system properly instead of erroring out. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-09-21Btrfs: check roots last log commit when checking if an inode has been loggedJosef Bacik
Liu introduced a local copy of the last log commit for an inode to make sure we actually log an inode even if a log commit has already taken place. In order to make sure we didn't relog the same inode multiple times he set this local copy to the current trans when we log the inode, because usually we log the inode and then sync the log. The exception to this is during rename, we will relog an inode if the name changed and it is already in the log. The problem with this is then we go to sync the inode, and our check to see if the inode has already been logged is tripped and we don't sync the log. To fix this we need to _also_ check against the roots last log commit, because it could be less than what is in our local copy of the log commit. This fixes a bug where we rename a file into a directory and then fsync the directory and then on remount the directory is no longer there. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-09-21Btrfs: actually log directory we are fsync()'ingJosef Bacik
If you just create a directory and then fsync that directory and then pull the power plug you will come back up and the directory will not be there. That is because we won't actually create directories if we've logged files inside of them since they will be created on replay, but in this check we will set our logged_trans of our current directory if it happens to be a directory, making us think it doesn't need to be logged. Fix the logic to only do this to parent directories. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-09-21Btrfs: actually limit the size of delalloc rangeJosef Bacik
So forever we have had this thing to limit the amount of delalloc pages we'll setup to be written out to 128mb. This is because we have to lock all the pages in this range, so anything above this gets a bit unweildly, and also without a limit we'll happily allocate gigantic chunks of disk space. Turns out our check for this wasn't quite right, we wouldn't actually limit the chunk we wanted to write out, we'd just stop looking for more space after we went over the limit. So if you do a giant 20gb dd on my box with lots of ram I could get 2gig extents. This is fine normally, except when you go to relocate these extents and we can't find enough space to relocate these moster extents, since we have to be able to allocate exactly the same sized extent to move it around. So fix this by actually enforcing the limit. With this patch I'm no longer seeing giant 1.5gb extents. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-09-21Btrfs: allocate the free space by the existed max extent size when ENOSPCMiao Xie
By the current code, if the requested size is very large, and all the extents in the free space cache are small, we will waste lots of the cpu time to cut the requested size in half and search the cache again and again until it gets down to the size the allocator can return. In fact, we can know the max extent size in the cache after the first search, so we needn't cut the size in half repeatedly, and just use the max extent size directly. This way can save lots of cpu time and make the performance grow up when there are only fragments in the free space cache. According to my test, if there are only 4KB free space extents in the fs, and the total size of those extents are 256MB, we can reduce the execute time of the following test from 5.4s to 1.4s. dd if=/dev/zero of=<testfile> bs=1MB count=1 oflag=sync Changelog v2 -> v3: - fix the problem that we skip the block group with the space which is less than we need. Changelog v1 -> v2: - address the problem that we return a wrong start position when searching the free space in a bitmap. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-09-21btrfs: add lockdep and tracing annotations for uuid treeDavid Sterba
Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-09-21btrfs: show compiled-in config features at module load timeStefan Behrens
We want to know if there are debugging features compiled in, this may affect performance. The message is printed before the sanity checks. (This commit message is a copy of David Sterba's commit message when he introduced btrfs_print_info()). Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-09-21Btrfs: more efficient inode tree replace operationFilipe David Borba Manana
Instead of removing the current inode from the red black tree and then add the new one, just use the red black tree replace operation, which is more efficient. Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Reviewed-by: Zach Brown <zab@redhat.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-09-21Btrfs: do not add replace target to the alloc_listIlya Dryomov
If replace was suspended by the umount, replace target device is added to the fs_devices->alloc_list during a later mount. This is obviously wrong. ->is_tgtdev_for_dev_replace is supposed to guard against that, but ->is_tgtdev_for_dev_replace is (and can only ever be) initialized *after* everything is opened and fs_devices lists are populated. Fix this by checking the devid instead: for replace targets it's always equal to BTRFS_DEV_REPLACE_DEVID. Cc: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-09-21Btrfs: fixup error handling in btrfs_reloc_cowJosef Bacik
If we failed to actually allocate the correct size of the extent to relocate we will end up in an infinite loop because we won't return an error, we'll just move on to the next extent. So fix this up by returning an error, and then fix all the callers to return an error up the stack rather than BUG_ON()'ing. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-09-21Merge tag 'v3.11' into for-linusChris Mason
Linux 3.11
2013-09-20Merge tag 'pm+acpi-3.12-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: 1) Four fixes for cpufreq regressions introduced by the changes that removed Device Tree parsing for CPU device nodes from cpufreq drivers from Sudeep KarkadaNagesha. 2) Two fixes for recent cpufreq regressions introduced by changes related to the preservation of sysfs attributes over system suspend/resume cycles from Viresh Kumar. 3) Fix for ACPI-based wakeup signaling in the PCI subsystem that fails to stop PME polling for devices put into the D3cold power state from Rafael J Wysocki. 4) Fix for bad interactions between cpufreq and udev on systems supporting intel_pstate where acpi-cpufreq is available as well from Yinghai Lu. * tag 'pm+acpi-3.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: return EEXIST instead of EBUSY for second registering PCI / ACPI / PM: Clear pme_poll for devices in D3cold on wakeup ARM: shmobile: change dev_id to cpu0 while registering cpu clock ARM: i.MX: change dev_id to cpu0 while registering cpu clock cpufreq: imx6q-cpufreq: assign cpu_dev correctly to cpu0 device cpufreq: cpufreq-cpu0: assign cpu_dev correctly to cpu0 device cpufreq: unlock correct rwsem while updating policy->cpu cpufreq: Clear policy->cpus bits in __cpufreq_remove_dev_finish()
2013-09-20Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull vhost updates from Michael Tsirkin: "vhost: minor changes on top of 3.12-rc1 This fixes module loading for vhost-scsi, and tweaks locking in vhost core a bit. Both of these are not exactly release blockers but it's early in the cycle so I think it's a good idea to apply them now" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost-scsi: whitespace tweak vhost/scsi: use vmalloc for order-10 allocation vhost: wake up worker outside spin_lock
2013-09-20CacheFiles: Don't try to dump the index key if the cookie has been clearedDavid Howells
Don't try to dump the index key that distinguishes an object if netfs data in the cookie the object refers to has been cleared (ie. the cookie has passed most of the way through __fscache_relinquish_cookie()). Since the netfs holds the index key, we can't get at it once the ->def and ->netfs_data pointers have been cleared - and a NULL pointer exception will ensue, usually just after a: CacheFiles: Error: Unexpected object collision error is reported. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-20CacheFiles: Fix memory leak in cachefiles_check_auxdata error pathsJosh Boyer
In cachefiles_check_auxdata(), we allocate auxbuf but fail to free it if we determine there's an error or that the data is stale. Further, assigning the output of vfs_getxattr() to auxbuf->len gives problems with checking for errors as auxbuf->len is a u16. We don't actually need to set auxbuf->len, so keep the length in a variable for now. We shouldn't need to check the upper limit of the buffer as an overflow there should be indicated by -ERANGE. While we're at it, fscache_check_aux() returns an enum value, not an int, so assign it to an appropriately typed variable rather than to ret. Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: David Howells <dhowells@redhat.com> cc: Hongyi Jia <jiayisuse@gmail.com> cc: Milosz Tanski <milosz@adfin.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-20lockref: use cmpxchg64 explicitly for lockless updatesWill Deacon
The cmpxchg() function tends not to support 64-bit arguments on 32-bit architectures. This could be either due to use of unsigned long arguments (like on ARM) or lack of instruction support (cmpxchgq on x86). However, these architectures may implement a specific cmpxchg64() function to provide 64-bit cmpxchg support instead. Since the lockref code requires a 64-bit cmpxchg and relies on the architecture selecting ARCH_USE_CMPXCHG_LOCKREF, move to using cmpxchg64 instead of cmpxchg and allow 32-bit architectures to make use of the lockless lockref implementation. Cc: Waiman Long <Waiman.Long@hp.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-20Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: cpufreq: return EEXIST instead of EBUSY for second registering ARM: shmobile: change dev_id to cpu0 while registering cpu clock ARM: i.MX: change dev_id to cpu0 while registering cpu clock cpufreq: imx6q-cpufreq: assign cpu_dev correctly to cpu0 device cpufreq: cpufreq-cpu0: assign cpu_dev correctly to cpu0 device cpufreq: unlock correct rwsem while updating policy->cpu cpufreq: Clear policy->cpus bits in __cpufreq_remove_dev_finish()
2013-09-20Merge branch 'acpi-pci'Rafael J. Wysocki
* acpi-pci: PCI / ACPI / PM: Clear pme_poll for devices in D3cold on wakeup
2013-09-20Merge tag 'arm64-stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64 Pull ARM64 fixes from Catalin Marinas: - Compat register fault reporting fix - Documentation clarification on tagged pointers - hwcap widened to 64-bit (user space already reading it as 64-bit) * tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: arm64: Widen hwcap to be 64 bit arm64: Correctly report LR and SP for compat tasks arm64: documentation: tighten up tagged pointer documentation arm64: Make do_bad_area() function static
2013-09-20arm64: Widen hwcap to be 64 bitSteve Capper
Under arm64 elf_hwcap is a 32 bit quantity, but it is stored in a 64 bit auxiliary ELF field and glibc reads hwcap as 64 bit. This patch widens elf_hwcap to be 64 bit. Signed-off-by: Steve Capper <steve.capper@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-09-20arm64: Correctly report LR and SP for compat tasksCatalin Marinas
When a task crashes and we print debugging information, ensure that compat tasks show the actual AArch32 LR and SP registers rather than the AArch64 ones. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-09-20arm64: documentation: tighten up tagged pointer documentationWill Deacon
Commit d50240a5f6ce ("arm64: mm: permit use of tagged pointers at EL0") added support for tagged pointers in userspace, but the corresponding update to Documentation/ contained some imprecise statements. This patch fixes up some minor ambiguities in the text, hopefully making it more clear about exactly what the kernel expects from user virtual addresses. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-09-20arm64: Make do_bad_area() function staticCatalin Marinas
This function is only called from arch/arm64/mm/fault.c. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-09-19Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A set of fixes for ARM platforms for 3.12. Among them: - A fix for build breakage in the MTD subsystem for some PXA devices. David Woodhouse has this patch in his for-next branch but has not been responding to our requests to send it up so here it is. I should have amended the commit message to describe the build failure for CONFIG_OF=n setups, but forgot and now it's down in the stack of commits. - Added device-tree for the BeagleBone Black. Turns out people have been using the older "regualar" bone DT for the newer boards, and there's risk of damaging hardware that way. - Misc DT and regular fixes for OMAP. - Fix to make the ST-Ericsson "snowball" boards boot with multi_v7_defconfig, and enable one of the ST-E reference boards on the same config. - Kconfig cleanup for u300 to hide submenus when the platform isn't enabled. - Enable ARM_ATAG_DTB_COMPAT to let firmware override command line when booting with an appended devicetree on non-DT-enabled firmware (needed to boot snowball)" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits) ARM: multi_v7: add HREFv60 to multi_v7 defconfig ARM: OMAP2+: mux: fix trivial typo in name ARM: OMAP4 SMP: Corrected a typo fucntions to functions ARM: OMAP4: cpuidle: fix: call cpu_cluster_pm_exit conditionally mailbox: remove unnecessary platform_set_drvdata() ARM: mach-omap2: gpmc: Fix warning when CONFIG_ARM_LPAE=y ARM: OMAP: fix return value check in omap_device_build_from_dt() ARM: OMAP4: Fix clock_get error for GPMC during boot ARM: sa1100: collie.c: fall back to jedec_probe flash detection ARM: u300: hide submenus ARM: dts: igep00x0: Add pinmux configuration for MCBSP2 ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for blaze ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for pandaboard mtd: nand: pxa3xx: Remove unneeded ifdef CONFIG_OF ARM: multi_v7_defconfig: enable ARM_ATAG_DTB_COMPAT ARM: ux500: disable outer cache debug ARM: dts: OMAP5: fix ocp2scp DTS data ARM: dts: OMAP5: fix reg property size ARM: dts: am335x-bone*: add DT for BeagleBone Black ARM: dts: omap3-beagle-xm: fix string error in compatible property ...
2013-09-20Merge branch 'msm-fixes-3.12' of ↵Dave Airlie
git://people.freedesktop.org/~robclark/linux into drm-fixes A couple small msm fixes. Plus drop of set_need_resched(). * 'msm-fixes-3.12' of git://people.freedesktop.org/~robclark/linux: drm/msm: drop unnecessary set_need_resched() drm/msm: fix potential NULL pointer dereference drm/msm: workaround for missing irq drm/msm: return -EBUSY if bo still active drm/msm: fix return value check in ERR_PTR() drm/msm: fix cmdstream size check drm/msm: hangcheck harder drm/msm: handle read vs write fences
2013-09-20Merge branch 'exynos-drm-fixes' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes Just small fixes, and code cleanups. * 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: fix return value check in lowlevel_buffer_allocate() drm/exynos: Fix address space warnings in exynos_drm_fbdev.c drm/exynos: Fix address space warning in exynos_drm_buf.c drm/exynos: Remove redundant OF dependency
2013-09-20Merge tag 'drm-intel-fixes-2013-09-19' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Some more dealock fixes around pageflips and gpu hangs, fixes for hsw hangs when doing modesets/dpms. And a few minor things to rectify issues with our modeset state tracking which the checker spotted. * tag 'drm-intel-fixes-2013-09-19' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: Don't enable the cursor on a disable pipe drm/i915: do not update cursor in crtc mode set drm/i915: kill set_need_resched drm/i915/dvo: set crtc timings again for panel fixed modes drm/i915/sdvo: Robustify the dtd<->drm_mode conversions drm/i915/sdvo: Fully translate sync flags in the dtd->mode conversion drm/i915: Use proper print format for debug prints drm/i915: fix wait_for_pending_flips vs gpu hang deadlock drm/i915: Track pfit enable state separately from size
2013-09-20cpufreq: return EEXIST instead of EBUSY for second registeringYinghai Lu
On systems that support intel_pstate, acpi_cpufreq fails to load, and udev keeps trying until trace gets filled up and kernel crashes. The root cause is driver return ret from cpufreq_register_driver(), because when some other driver takes over before, it will return EBUSY and then udev will keep trying ... cpufreq_register_driver() should return EEXIST instead so that the system can boot without appending intel_pstate=disable and still use intel_pstate. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>