aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-06-11Blackfin RTC drivers: update MAINTAINERS informationMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Cc: Alessandro Zummo <a.zummo@towertech.it>
2007-06-11Blackfin serial driver: decouple PARODD and CMSPAR checking from PARENBMike Frysinger
as the termios info does not stipulate that the former are dependent on the latter Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin serial driver: actually implement the break_ctl() functionMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin serial driver: ignore framing and parity errorsMike Frysinger
if we get a break signal, we want to ignore framing and parity errors because those will always be set (by nature of the signal) Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin serial driver: hook up our UARTs STP bit with userspaces CMSPARMike Frysinger
so we can now do spaced/marked parity Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin arch: move HI/LO macros into blackfin.h and punt the rest of ↵Mike Frysinger
macros.h as it includes VDSP macros we never use Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin arch: redo our linker script a bitMike Frysinger
- we can start taking advantages of defines in asm-generic/vmlinux.lds.h - move our L1 relocated sections into init so it gets freed after relocation Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-14Blackfin arch: make sure we initialize our L1 Data B section properly based ↵Mike Frysinger
on the linked kernel Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-14Blackfin arch: fix bug can not wakeup from sleep via push buttonsMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin arch: add support for Alon Bar-Lev's dynamic kernel command-lineMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin arch: add missing gpio.h header to fix compiling in some pm ↵Michael Hennerich
configurations Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin arch: As Mike pointed out range goes form m..MAX_BLACKFIN_GPIO -1Michael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin arch: fix spelling typo in outputMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-14Blackfin arch: try to split up functions like this into smaller units ↵Aubrey Li
according to LKML review Signed-off-by: Aubrey Li <aubrey.li@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin arch: add proper ENDPROC()Mike Frysinger
add proper ENDPROC() to close out assembly functions so size/type is set properly in the final ELF image Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin arch: move more of our startup code to .init so it can be freed ↵Mike Frysinger
once we are up and running Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin arch: unify differences between our diff head.S files -- no ↵Mike Frysinger
functional changes Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin arch: update defconfigsMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin arch: scrub old console definesMike Frysinger
since they arent respected anymore (use console=) and just confuse people Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin arch: fixup Blackfin MAINTIANERS team member listBryan Wu
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-14Blackfin arch: implement a basic /proc/sram file for L1 allocation visibilityMike Frysinger
implement a basic /proc/sram file for L1 allocation visibility until we can rewrite the entire L1 allocator (which would include a proper mechanism) Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin arch: mark our memory init functions with __init so they get freed ↵Mike Frysinger
after init Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin arch: all symbols were offset by 4k, since we didn't have the ↵Robin Getz
__text label. Bug tracker: http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3231 Singed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-14Blackfin arch: fix bug ad1836 fails to build properly for BF533-EZKITRoy Huang
bug log here: http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3166 Signed-off-by: Roy Huang <roy.huang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin arch: spelling fixesSimon Arlott
Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin arch: DMA code minor naming convention fixAubrey Li
Signed-off-by: Aubrey Li <aubrey.li@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi>
2007-06-11Blackfin arch: remove defconfig fileMike Frysinger
Since we have board-specific defconfigs and the default is set to BF537-STAMP, we no longer need this one Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: move input-polldev to drivers/input Input: i8042 - add ULI EV4873 to noloop list Input: i8042 - add ASUS P65UP5 to the noloop list Input: usbtouchscreen - fix fallout caused by move from drivers/usb
2007-06-13mmc: get back read-only switch functionPierre Ossman
Somehow the code to read the read-only switch of SD cards got lost in the reorganisation. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-06-13mmc-omap: fix sd response type 6 vs. 1Ragner Magalhaes
Ignoring OMAP_MMC_STAT_CARD_ERR, treating it as if the command completed correctly. Signed-off-by: Ragner Magalhaes <ragner.magalhaes@indt.org.br> Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-06-13Input: move input-polldev to drivers/inputDmitry Torokhov
To work around deficiences in Kconfig that allows to "select" a symbol without automatically selecting all dependencies for that symbol move input-polldev from drivers/input/misc to drivers/input thus removing extra dependency on CONFIG_INPUT_MISC. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-06-12Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (89 commits) myri10ge: update driver version myri10ge: report when the link partner is running in Myrinet mode myri10ge: limit the number of recoveries NetXen: Fix link status messages Revert "[netdrvr e100] experiment with doing RX in a similar manner to eepro100" [PATCH] libertas: convert libertas_mpp into anycast_mask [PATCH] libertas: actually send mesh frames to mesh netdev [PATCH] libertas: deauthenticate from AP in channel switch [PATCH] libertas: pull current channel from firmware on mesh autostart [PATCH] libertas: reduce SSID and BSSID mixed-case abuse [PATCH] libertas: remove WPA_SUPPLICANT structure [PATCH] libertas: remove structure WLAN_802_11_SSID and libertas_escape_essid [PATCH] libertas: tweak association debug output [PATCH] libertas: fix big-endian associate command. [PATCH] libertas: don't byte-swap firmware version number. It's a byte array. [PATCH] libertas: more endianness fixes, in tx.c this time [PATCH] libertas: More endianness fixes. [PATCH] libertas: first pass at fixing up endianness issues [PATCH] libertas: sparse fixes [PATCH] libertas: fix character set in README ...
2007-06-12Merge branch 'master' into upstream-fixesJeff Garzik
2007-06-12Merge branch 'libertas-fixes' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2007-06-12Merge branch 'libertas' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2007-06-12sysfs: fix race condition around sd->s_dentry, take#2Tejun Heo
Allowing attribute and symlink dentries to be reclaimed means sd->s_dentry can change dynamically. However, updates to the field are unsynchronized leading to race conditions. This patch adds sysfs_lock and use it to synchronize updates to sd->s_dentry. Due to the locking around ->d_iput, the check in sysfs_drop_dentry() is complex. sysfs_lock only protect sd->s_dentry pointer itself. The validity of the dentry is protected by dcache_lock, so whether dentry is alive or not can only be tested while holding both locks. This is minimal backport of sysfs_drop_dentry() rewrite in devel branch. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-12sysfs: fix condition check in sysfs_drop_dentry()Tejun Heo
The condition check doesn't make much sense as it basically always succeeds. This causes NULL dereferencing on certain cases. It seems that parentheses are put in the wrong place. Fix it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-12sysfs: store sysfs inode nrs in s_ino to avoid readdir oopsesEric Sandeen
Backport of ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.22-rc1/2.6.22-rc1-mm1/broken-out/gregkh-driver-sysfs-allocate-inode-number-using-ida.patch For regular files in sysfs, sysfs_readdir wants to traverse sysfs_dirent->s_dentry->d_inode->i_ino to get to the inode number. But, the dentry can be reclaimed under memory pressure, and there is no synchronization with readdir. This patch follows Tejun's scheme of allocating and storing an inode number in the new s_ino member of a sysfs_dirent, when dirents are created, and retrieving it from there for readdir, so that the pointer chain doesn't have to be traversed. Tejun's upstream patch uses a new-ish "ida" allocator which brings along some extra complexity; this -stable patch has a brain-dead incrementing counter which does not guarantee uniqueness, but because sysfs doesn't hash inodes as iunique expects, uniqueness wasn't guaranteed today anyway. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-12myri10ge: update driver versionBrice Goglin
Update myri10ge driver version to 1.3.1-1.248. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-12myri10ge: report when the link partner is running in Myrinet modeBrice Goglin
Since Myri-10G boards may also run in Myrinet mode instead of Ethernet, add a message when we detect that the link partner is not running in the right mode. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-12myri10ge: limit the number of recoveriesBrice Goglin
Limit the number of recoveries from a NIC hw watchdog reset to 1 by default. It enables detection of defective NICs immediately since these memory parity errors are expected to happen very rarely (less than once per century*NIC). Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-12NetXen: Fix link status messagesMithlesh Thukral
NetXen: Fix incorrect link status even with switch turned OFF. NetXen driver failed to accurately indicate when a link is up or down. This was encountered during failover testing, when the first port indicated that the link was up even when the 10G switch it was assigned to in the Bladecenter was turned off completely. Signed-off by: Wen Xiong <wenxiong@us.ibm.com> Signed-off by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-12Revert "[netdrvr e100] experiment with doing RX in a similar manner to eepro100"Jeff Garzik
This reverts commit d52df4a35af569071fda3f4eb08e47cc7023f094. This patch attempted to fix e100 for non-cache coherent memory architectures by using the cb style code that eepro100 had and using the EL and s bits from the RFD list. Unfortunately the hardware doesn't work exactly like this and therefore this patch actually breaks e100. Reverting the change brings it back to the previously known good state for 2.6.22. The pending rewrite in progress to this code can then be safely merged later. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-12[PATCH] libertas: convert libertas_mpp into anycast_maskLuis Carlos
With firmware 5.220.11.p5, this allows to specify the anycast addresses the device will listen to. The anycast address range is C0:27:C0:27:C0:XX where XX goes from 00 to 1F (or 0 to 31 in dec). The value to write on anycast_mask will specify which addresses the device listens to. Bits in a 32 bit int are numbered from 0 (least significative bit) to 31. A specific address ending in YY will be listened to if bit YY in the value is set to one. Examples: 0x00000000 : do not listen to any anycast address 0xFFFFFFFF : listen to every anycast address from :00 to :1F 0x00000013 : listen to anycast addresses :00, :01 and :04 Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-12[PATCH] libertas: actually send mesh frames to mesh netdevDan Williams
Found by Luis; got broken during module split. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-12[PATCH] libertas: deauthenticate from AP in channel switchLuis Carlos Cobo Rus
This avoids channel mismatch between driver and firmware in case we change channel while associated to an AP. Signed-off-by: Luis Carlos Cobo Rus <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-12[PATCH] libertas: pull current channel from firmware on mesh autostartLuis Carlos Cobo Rus
Signed-off-by: Luis Carlos Cobo Rus <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-12Input: i8042 - add ULI EV4873 to noloop listDmitry Torokhov
The box does not implement AUX LOOP command properly and so we can't test for AUX IRQ delivery so blacklist it via DMI and assume that AUX port is present. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-06-12Input: i8042 - add ASUS P65UP5 to the noloop listDmitry Torokhov
This board does not raise AUX IRQ in response to AUX LOOP command which interferes with our test for proper AUX IRQ wiring. Put it in the blacklist and assume mouse is present. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-06-12Input: usbtouchscreen - fix fallout caused by move from drivers/usbOndrej Zary
During the move from drivers/usb/input into drivers/input/touchscreen Kconfig variables were shuffled a bit to use a new namespace (CONFIG_TOUCHSCREEN) while usbtouchscreen was still using old ones. Also noticed by Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-19 06:09:56 +0000