aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-02-02pda_power: various cleanupsAnton Vorontsov
- handle spurious interrupts correctly; - get rid of pda_power_supplies array, use two variables instead; - factor out psy_changed() function, it will be used for polling. Signed-off-by: Anton Vorontsov <cbou@mail.ru>
2008-02-02apm_power: support using VOLTAGE_* properties for apm calculationsDmitry Baryshkov
It's pretty dummy, but useful for batteries for which we can only get voltages. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Anton Vorontsov <cbou@mail.ru>
2008-02-02pda_power: add suspend/resume supportDmitry Baryshkov
Add suspend/resume/wakeup support for pda_power. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Anton Vorontsov <cbou@mail.ru>
2008-02-02power_supply: add few more values and propsDmitry Baryshkov
Add LiMn (one of the most common for small non-rechargable batteries) battery technology and voltage_min/_max properties support. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Anton Vorontsov <cbou@mail.ru>
2008-02-02pda_power: only register available psuDmitry Baryshkov
Currently pda-power adds both ac and usb power supply units. This patch fixes it so that psu are added only if they are enabled. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Anton Vorontsov <cbou@mail.ru>
2008-02-02power: fix incorrect unregistration in power_supply_create_attrs error pathAndres Salomon
In power_supply_create_attrs(), we create static attributes as referenced by power_supply_static_attrs[i]. After that, if we fail, we unregister via power_supply_static_attrs[psy->properties[i]]. This is incorrect, as psy->properties has absolutely no bearing on static attribs. This patch fixes it to unregister the correct attrib. Another line which was unnecessarily line wrapped is also unwrapped. Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-02power: remove POWER_SUPPLY_PROP_CAPACITY_LEVELAndres Salomon
The CAPACITY_LEVEL stuff defines various levels of charge; however, what is the difference between them? What differentiates between HIGH and NORMAL, LOW and CRITICAL, etc? As it appears that these are fairly arbitrary, we end up making such policy decisions in the kernel (or in hardware). This is the sort of decision that should be made in userspace, not in the kernel. If the hardware does not support _CAPACITY and it cannot be easily calculated, then perhaps the driver should register a custom CAPACITY_LEVEL attribute; however, userspace should not become accustomed to looking for such a thing, and we should certainly not encourage drivers to provide CAPACITY_LEVEL stubs. The following removes support for POWER_SUPPLY_PROP_CAPACITY_LEVEL. The OLPC battery driver is the only driver making use of this, so it's removed from there as well. Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-02[BATTERY] power_supply_leds: use kasprintfAkinobu Mita
Use kasprintf instead of kmalloc()-strcpy()-strcat(). Cc: Anton Vorontsov <cbou@mail.ru> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Anton Vorontsov <cbou@mail.ru>
2008-02-02[BATTERY] Every file should include the headers containing the prototypes ↵Adrian Bunk
for its global functions. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Anton Vorontsov <cbou@mail.ru>
2008-02-02x86: fix bootup crash in native_read_tsc()Ingo Molnar
fix bootup crash in native_read_tsc() that was reported on an Athlon-XP and bisected. The correct feature boundary for X86_FEATURE_MFENCE_RDTSC is not XMM but XMM2. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (100 commits) ide: move hwif_register() call out of ide_probe_port() ide: factor out code for tuning devices from ide_probe_port() ide: move handling of I/O resources out of ide_probe_port() ide: make probe_hwif() return an error value ide: use ide_remove_port_from_hwgroup in init_irq() ide: prepare init_irq() for using ide_remove_port_from_hwgroup() ide: factor out code removing port from hwgroup from ide_unregister() ide: I/O resources are released too early in ide_unregister() ide: cleanup ide_system_bus_speed() ide: remove needless zeroing of hwgroup fields from init_irq() ide: remove unused ide_hwgroup_t fields ide_platform: remove struct hwif_prop ide: remove hwif->present manipulations from hwif_init() ide: move wait_hwif_ready() documentation in the right place ide: fix handling of busy I/O resources in probe_hwif() <linux/hdsmart.h> is not used by kernel code ide: don't include <linux/hdsmart.h> ide-floppy: cleanup header ide: update/add my Copyrights ide: delete filenames/versions from comments ...
2008-02-01ide: move hwif_register() call out of ide_probe_port()Bartlomiej Zolnierkiewicz
* Add BUG_ON(hwif->present) at the start of ide_probe_port(). * Move hwif_register() call (along with setting hwif->present) from ide_probe_port() to ide_device_add_all(). As a result the port will be registered with the device tree _after_: - probing both devices (if both are present) - port reset (if hwif->reset is set) - restoring local IRQs state and re-enabling port IRQ While at it: * Rename hwif_register() to ide_register_port(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: factor out code for tuning devices from ide_probe_port()Bartlomiej Zolnierkiewicz
* Factor out code for tuning devices from ide_probe_port() to ide_port_tune_devices(). * Move ide_port_tune_devices() call from ide_probe_port() to ide_device_add_all(). There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: move handling of I/O resources out of ide_probe_port()Bartlomiej Zolnierkiewicz
Reserve/release I/O resources in ide_device_add_all() instead of ide_probe_port(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: make probe_hwif() return an error valueBartlomiej Zolnierkiewicz
Make probe_hwif() return an error value. While at it: * Remove comment about MAX_DRIVES == 2 limitation (it is not special to probe_hwif(), it is a general assumption taken by a lot of IDE code). * Rename probe_hwif() to ide_probe_port(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: use ide_remove_port_from_hwgroup in init_irq()Bartlomiej Zolnierkiewicz
There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: prepare init_irq() for using ide_remove_port_from_hwgroup()Bartlomiej Zolnierkiewicz
* BUG_ON() early if 'hwif->next == hwif' and there is a 'match' hwgroup. * Remove printk() for impossible condition and add a BUG_ON(hwgroup->drive) to match code in ide_unregister(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: factor out code removing port from hwgroup from ide_unregister()Bartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: I/O resources are released too early in ide_unregister()Bartlomiej Zolnierkiewicz
Release I/O resources after releasing DMA. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: cleanup ide_system_bus_speed()Bartlomiej Zolnierkiewicz
Use the facts that: * When ide_init() is called 'system_bus_speed' always equals zero. * system_bus_clock() is never called before ide_init(). and: * Move printk() from ide_system_bus_speed() to ide_init(). * Don't assign 'system_bus_speed' in ide_system_bus_speed(). * Don't call ide_system_bus_speed() in system_bus_clock(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: remove needless zeroing of hwgroup fields from init_irq()Bartlomiej Zolnierkiewicz
Since kmalloc_node() is called with __GFP_ZERO flag there is no need to explicitly zero hwgroup fields. While at it: * Use 'hwif' instead of 'hwif->drives[0].hwif' for kmalloc_node() call. * Fix whitespace damage. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: remove unused ide_hwgroup_t fieldsBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide_platform: remove struct hwif_propBartlomiej Zolnierkiewicz
* Remove 'if (hwif != hwif_prop.hwif)' check from plat_ide_remove() (pdev->dev.driver_data and hwif_prop.hwif are set at the same time in plat_ide_probe() and are identical). * Use hwif->index for ide_unregister() in plat_ide_remove(). * Use local variables instead of hwif_prop.plat_ide[_alt]_mapbase in plat_ide_probe() and remove no longer needed struct hwif_prop. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: remove hwif->present manipulations from hwif_init()Bartlomiej Zolnierkiewicz
* Call hwif_init() only if hwif->present is set. * If hwif_init() fails clear hwif->present. * Remove hwif->present manipulations from hwif_init(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: move wait_hwif_ready() documentation in the right placeBartlomiej Zolnierkiewicz
* Move wait_hwif_ready() documentation before this function. * Fix trailing whitespaces. * s/wait-for-busy/wait-for-non-busy/ * Remove no longer valid comment about the current code behavior. * Docbook-ize it. * Rename wait_hwif_ready() to ide_port_wait_ready(). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: fix handling of busy I/O resources in probe_hwif()Bartlomiej Zolnierkiewicz
It could be that I/O resources are busy because some other host driver has already claimed them so don't unregister the devices. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01<linux/hdsmart.h> is not used by kernel codeBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: don't include <linux/hdsmart.h>Bartlomiej Zolnierkiewicz
IDE doesn't need it. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-floppy: cleanup headerBorislav Petkov
Move ide-floppy historical changelog to Documentation/ide/ChangeLog.ide-floppy.1996-2002 Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: update/add my CopyrightsBartlomiej Zolnierkiewicz
The last years stuff and a trip down memory lane... Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: delete filenames/versions from commentsBartlomiej Zolnierkiewicz
Delete filenames/versions from comments. I'm leaving decisions about adding DRV_VERSION defines and MODULE_VERSION()-s to maintainers of the respective drivers. While at it: * Remove unused VERSION define from ide.c. * Remove unused/stale DRV_VERSION define from au1xxx-ide.c. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01au1xxx-ide/rapide: use hwif->index for ide_unregister()Bartlomiej Zolnierkiewicz
Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-pmac: macio resource freeing bugfixBartlomiej Zolnierkiewicz
Release DMA resource before zeroing pmif. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01au1xxx-ide: device tree bugfixBartlomiej Zolnierkiewicz
Add missing hw.dev setup (so hwif->gendev.parent will be set by ide_init_port_hw() to point to the parent device). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: use ide_build_sglist() and ide_destroy_dmatable() in non-PCI host driversBartlomiej Zolnierkiewicz
* Make ide_build_sglist() and ide_destroy_dmatable() available also when CONFIG_BLK_DEV_IDEDMA_PCI=n. * Use ide_build_sglist() and ide_destroy_dmatable() in {ics,au1xxx-}ide.c and remove no longer needed {ics,au}ide_build_sglist(). There should be no functionality changes caused by this patch. Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: switch to DMA-mapping APIBartlomiej Zolnierkiewicz
* pci_map_sg() -> dma_map_sg() in ide_build_sglist(). * pci_unmap_sg() -> dma_unmap_sg() in ide_destroy_dmatable(). There should be no functionality changes caused by this patch except for blackfin arch whose dma_[un]map_sg() implementation differs from pci_[un]map_sg() one (on s390 arch there is no PCI, on avr32 and h8300 archs PCI is currently unsupported, on m32r arch PCI support depends on BROKEN, on m68k arch PCI support depends on HADES which in turn depends on BROKEN, on all other archs dma_[un]map_sg() functionality matches with pci_[un]map_sg() one). blackfin behavior change was ack-ed by Bryan Wu. Cc: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01icside: use hwif->devBartlomiej Zolnierkiewicz
* Setup hwif->dev in icside_setup(). * Use hwif->dev instead of state->dev in icside_build_sglist(), icside_dma_end(), icside_dma_start() and icside_dma_setup(). * Remove no longer needed 'dev' field from struct icside_state. Cc: Russell King <rmk@arm.linux.org.uk> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01au1xxx-ide: use hwif->devBartlomiej Zolnierkiewicz
* Setup hwif->dev in au_ide_probe(). * Use hwif->dev instead of ahwif->dev in auide_build_sglist(), auide_build_dmatable(), auide_dma_end() and auide_ddma_init(). * Remove no longer needed 'dev' field from _auide_hwif type. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: keep pointer to struct device instead of struct pci_dev in ide_hwif_tBartlomiej Zolnierkiewicz
Keep pointer to struct device instead of struct pci_dev in ide_hwif_t. While on it: * Use *dev->dma_mask instead of pci_dev->dma_mask in ide_toggle_bounce(). There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: use ide_destroy_dmatable() instead of pci_unmap_sg() (take 2)Bartlomiej Zolnierkiewicz
Use ide_destroy_dmatable() in: * ide-dma.c::ide_build_dmatable() * sgiioc4.c::sgiioc4_build_dma_table() * pmac.c::pmac_ide_{build,destroy}_dmatable() There should be no functionality changes caused by this patch. v2: * pmac.c build fix from Andrew Morton. Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: remove BUG_ON() from ide_build_sglist()Bartlomiej Zolnierkiewicz
do_rw_taskfile() has been fixed to check the return value of ->dma_setup method so this BUG_ON() is no longer needed. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: fix ide_intr() for non-PCI devices and CONFIG_BLK_DEV_IDEPCI=yBartlomiej Zolnierkiewicz
'hwif->pci_dev && !hwif->pci_dev->vendor' condition is never true, check for 'hwif->chipset != ide_pci' instead. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01piix: remove stale commentsBartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: add IDE_HFLAG_NO_DSC host flagBartlomiej Zolnierkiewicz
* Add IDE_HFLAG_NO_DSC host flag for hosts that doesn't support DSC overlap. * Set it in aec62xx (for ATP850UF only) and hpt34x host drivers. * Convert ide-tape device driver to check for IDE_HFLAG_NO_DSC flag. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: add IDE_HFLAG_CLEAR_SIMPLEX host flagBartlomiej Zolnierkiewicz
* Rename 'simplex_stat' variable to 'dma_stat' in ide_get_or_set_dma_base(). * Factor out code for forcing host out of "simplex" mode from ide_get_or_set_dma_base() to ide_pci_clear_simplex() helper. * Add IDE_HFLAG_CLEAR_SIMPLEX host flag and set it in alim15x3 (for M5229), amd74xx (for AMD 7409), cmd64x (for CMD643), generic (for Netcell) and serverworks (for CSB5) host drivers. * Make ide_get_or_set_dma_base() test for IDE_HFLAG_CLEAR_SIMPLEX host flag instead of checking dev->device (BTW the code was buggy because it didn't check for dev->vendor, luckily none of these PCI Device IDs was used by some other vendor for PCI IDE controller). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01amd74xx: remove amd_ide_chips tableBartlomiej Zolnierkiewicz
* Remove no longer needed assertion from amd74xx_probe(). * Factor out cable detection for AMD7409 to amd7409_cable_detect() and for chipsets >= AMD7411 to amd7411_cable_detect(). * Use dev->vendor and dev->device instead of amd_config->udma_mask when selecting cable detection method and checking for broken FIFO support in init_chipset_amd74xx(). * Remove no longer needed AMD_BAD_FIFO define. * Add 'swdma' parameter for setting .swdma_mask to DECLARE_AMD_DEV() macro. * Add 'udma' parameter for setting .udma_mask to DECLARE_{AMD,NV}_DEV() macro. * Keep a copy of a current amd74xx_chipsets[] entry in amd74xx_probe() in order to fix ->swdma_mask on early AMD7409 revisions and ->udma_mask on Serenade mainboards. * Remove no longer needed fixups from init_chipset_amd74xx() and AMD_CHECK_{SWDMA,SERENADE} defines. * Move printing banner message from init_chipset_amd74xx() to amd74xx_probe(), also remove incorrect comment while at it. * Use hwif->ultra_mask instead of amd_config->udma_mask in amd_set_drive(). * Add 'udma_mask' argument to amd_set_speed() and pass UDMA mask from amd_set_drive() instead of using amd_config->udma_mask. * Move amd_config->base from AMD_* defines to users of these defines and add 0x40 the defined values. Then add amd_offset() inline helper for selecting offset from 0x40 base (needed for nVidia controllers) and finally use it in amd_set_speed(), amd7411_cable_detect() and init_chipset_amd74xx() instead of amd_config->base. * Remove no longer needed AMD_BAD_SWDMA define, ->{swdma,ultra}_mask setup from init_hwif_amd74xx(), amd_{config,chipset} variables and amd_ide_chips table. * Fix init_chipset_amd74xx() comment. * Bump driver version. There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: ide_setup_dma() assumes 8 portsSergei Shtylyov
According to http://marc.info/?l=linux-ide&m=114346138611631, the drivers must always register 8 DMA ports with ide_setup_dma(), so its last argument is not needed. While at it, kill some useless parens in that function... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01trm290: cannot call ide_setup_dma()Sergei Shtylyov
The TRM-290 chip is *not* SFF-8038i compatible and therefore can *not* call ide_setup_dma() -- fix this and also cleanup the code a bit... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: move the remaining cdrom.c ioctl handling code to ide-cd_ioctl.cBorislav Petkov
There should be no functional changes from this. Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-{floppy,tape}: remove debug code for dumping identify dataBartlomiej Zolnierkiewicz
IDE core supports dumping raw identify data in hdparm friendly format now so verbose identify dumping in ide-{floppy,tape}.c device drivers (done iff IDE{FLOPPY,TAPE}_DEBUG_INFO is defined to '1' and it is '0' by default) is no longer nedeed. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-22 02:56:00 +0000