aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-03-25ceph: flush msgr_wq during mds_client shutdownSage Weil
The release method for mds connections uses a backpointer to the mds_client, so we need to flush the workqueue of any pending work (and ceph_connection references) prior to freeing the mds_client. This fixes an oops easily triggered under UML by while true ; do mount ... ; umount ... ; done Also fix an outdated comment: the flush in ceph_destroy_client only flushes OSD connections out. This bug is basically an artifact of the ceph -> ceph+libceph conversion. Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-22rbd: use watch/notify for changes in rbd headerYehuda Sadeh
Send notifications when we change the rbd header (e.g. create a snapshot) and wait for such notifications. This allows synchronizing the snapshot creation between different rbd clients/rools. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-22libceph: add lingering request and watch/notify event frameworkYehuda Sadeh
Lingering requests are requests that are sent to the OSD normally but tracked also after we get a successful request. This keeps the OSD connection open and resends the original request if the object moves to another OSD. The OSD can then send notification messages back to us if another client initiates a notify. This framework will be used by RBD so that the client gets notification when a snapshot is created by another node or tool. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-21rbd: update email address in DocumentationSage Weil
Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-21ceph: rename dentry_release -> d_release, fix commentSage Weil
Just for consistency's sake. Fix obsolete comment too. Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-21ceph: add request to the tail of unsafe write listHenry C Chang
In sync_write_wait(), we assume that the newest request is at the tail of unsafe write list. We should maintain the semantics here. Signed-off-by: Henry C Chang <henry_c_chang@tcloudcomputing.com> Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-21ceph: remove request from unsafe list if it is canceled/timed outHenry C Chang
This fixes the list corruption warning like this: ------------[ cut here ]------------ WARNING: at lib/list_debug.c:30 __list_add+0x68/0x81() Hardware name: X8DTU list_add corruption. prev->next should be next (ffff880618931250), but was (null). (prev=ffff880c188b9130). Modules linked in: nfsd lockd nfs_acl auth_rpcgss exportfs ceph libceph libcrc32c sunrpc ipv6 fuse igb i2c_i801 ioatdma i2c_core iTCO_wdt iTCO_vendor_support joydev dca serio_raw usb_storage [last unloaded: scsi_wait_scan] Pid: 10977, comm: smbd Tainted: G W 2.6.32.23-170.Elaster.xendom0.fc12.x86_64 #1 Call Trace: [<ffffffff8105753c>] warn_slowpath_common+0x7c/0x94 [<ffffffff810575ab>] warn_slowpath_fmt+0x41/0x43 [<ffffffff812351a3>] __list_add+0x68/0x81 [<ffffffffa014799d>] ceph_aio_write+0x614/0x8a2 [ceph] [<ffffffff8111d2a0>] do_sync_write+0xe8/0x125 [<ffffffff81075a1f>] ? autoremove_wake_function+0x0/0x39 [<ffffffff811f21ec>] ? selinux_file_permission+0x5c/0xb3 [<ffffffff811e8521>] ? security_file_permission+0x16/0x18 [<ffffffff8111d864>] vfs_write+0xae/0x10b [<ffffffff8111d91b>] sys_pwrite64+0x5a/0x76 [<ffffffff81012d32>] system_call_fastpath+0x16/0x1b ---[ end trace 08573eb9f07ff6f4 ]--- Signed-off-by: Henry C Chang <henry_c_chang@tcloudcomputing.com> Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-21ceph: move readahead default to fs/ceph from libcephSage Weil
Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-21ceph: add ino32 mount optionYehuda Sadeh
The ino32 mount option forces the ceph fs to report 32 bit ino values. This is useful for 64 bit kernels with 32 bit userspace. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2011-03-21ceph: update common header filesYehuda Sadeh
This updates the common header files used by the different ceph related modules. Specifically it adds definitions required by the rbd watch/notify feature. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2011-03-21ceph: remove debugfs debug cruftSage Weil
Whoops! Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-21libceph: fix osd request queuing on osdmap updatesSage Weil
If we send a request to osd A, and the request's pg remaps to osd B and then back to A in quick succession, we need to resend the request to A. The old code was only calling kick_requests after processing all incremental maps in a message, so it was very possible to not resend a request that needed to be resent. This would make the osd eventually time out (at least with the current default of osd timeouts enabled). The correct approach is to scan requests on every map incremental. This patch refactors the kick code in a few ways: - all requests are either on req_lru (in flight), req_unsent (ready to send), or req_notarget (currently map to no up osd) - mapping always done by map_request (previous map_osds) - if the mapping changes, we requeue. requests are resent only after all map incrementals are processed. - some osd reset code is moved out of kick_requests into a separate function - the "kick this osd" functionality is moved to kick_osd_requests, as it is unrelated to scanning for request->pg->osd mapping changes Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-15ceph: preserve I_COMPLETE across renameSage Weil
d_move puts the renamed dentry at the end of d_subdirs, screwing with our cached dentry directory offsets. We were just clearing I_COMPLETE to avoid any possibility of trouble. However, assigning the renamed dentry an offset at the end of the directory (to match it's new d_subdirs position) is sufficient to maintain correct behavior and hold onto I_COMPLETE. This is especially important for workloads like rsync, which renames files into place. Before, we would lose I_COMPLETE and do MDS lookups for each file. With this patch we only talk to the MDS on create and rename. Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-15libceph: Fix base64-decoding when input ends in newline.Tommi Virtanen
It used to return -EINVAL because it thought the end was not aligned to 4 bytes. Clean up superfluous src < end test in if, the while itself guarantees that. Signed-off-by: Tommi Virtanen <tommi.virtanen@dreamhost.com> Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-14Linux 2.6.38v2.6.38Linus Torvalds
2011-03-14Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300 * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300: MN10300: atomic_read() should ensure it emits a load MN10300: The SMP_ICACHE_INV_FLUSH_RANGE IPI command does not exist MN10300: Proper use of macros get_user() in the case of incremented pointers
2011-03-14Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (26 commits) MIPS: Alchemy: Fix reset for MTX-1 and XXS1500 MIPS: MTX-1: Make au1000_eth probe all PHY addresses MIPS: Jz4740: Add HAVE_CLK MIPS: Move idle task creation to work queue MIPS, Perf-events: Use unsigned delta for right shift in event update MIPS, Perf-events: Work with the new callchain interface MIPS, Perf-events: Fix event check in validate_event() MIPS, Perf-events: Work with the new PMU interface MIPS, Perf-events: Work with irq_work MIPS: Fix always CONFIG_LOONGSON_UART_BASE=y MIPS: Loongson: Fix potentially wrong string handling MIPS: Fix GCC-4.6 'set but not used' warning in arch/mips/mm/init.c MIPS: Fix GCC-4.6 'set but not used' warning in ieee754int.h MIPS: Remove unused code from arch/mips/kernel/syscall.c MIPS: Fix GCC-4.6 'set but not used' warning in signal*.c MIPS: MSP: Fix MSP71xx bpci interrupt handler return value MIPS: Select R4K timer lib for all MSP platforms MIPS: Loongson: Remove ad-hoc cmdline default MIPS: Clear the correct flag in sysmips(MIPS_FIXADE, ...). MIPS: Add an unreachable return statement to satisfy buggy GCCs. ...
2011-03-14Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: ce4100: Set pci ops via callback instead of module init x86/mm: Fix pgd_lock deadlock x86/mm: Handle mm_fault_error() in kernel space x86: Don't check for BIOS corruption in first 64K when there's no need to
2011-03-14Revert "oom: oom_kill_process: fix the child_points logic"Linus Torvalds
This reverts the parent commit. I hate doing that, but it's generating some discussion ("half of it is right"), and since I am planning on doing the 2.6.38 release later today we can punt it to stable if required. Let's not rock the boat right now. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-14oom: oom_kill_process: fix the child_points logicOleg Nesterov
oom_kill_process() starts with victim_points == 0. This means that (most likely) any child has more points and can be killed erroneously. Also, "children has a different mm" doesn't match the reality, we should check child->mm != t->mm. This check is not exactly correct if t->mm == NULL but this doesn't really matter, oom_kill_task() will kill them anyway. Note: "Kill all processes sharing p->mm" in oom_kill_task() is wrong too. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-14MIPS: Alchemy: Fix reset for MTX-1 and XXS1500Florian Fainelli
Since commit 32fd6901 (MIPS: Alchemy: get rid of common/reset.c) Alchemy-based boards use their own reset function. For MTX-1 and XXS1500, the reset function pokes at the BCSR.SYSTEM_RESET register, but this does not work. According to Bruno Randolf, this was not tested when written. Previously, the generic au1000_restart() routine called the board specific reset function, which for MTX-1 and XXS1500 did not work, but finally made a jump to the reset vector, which really triggers a system restart. Fix reboot for both targets by jumping to the reset vector. Signed-off-by: Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2093/ Acked-by: Bruno Randolf <br1@einfach.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS: MTX-1: Make au1000_eth probe all PHY addressesFlorian Fainelli
When au1000_eth probes the MII bus for PHY address, if we do not set au1000_eth platform data's phy_search_highest_address, the MII probing logic will exit early and will assume a valid PHY is found at address 0. For MTX-1, the PHY is at address 31, and without this patch, the link detection/speed/duplex would not work correctly. CC: stable@kernel.org Signed-off-by: Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2111/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS: Jz4740: Add HAVE_CLKMaurus Cuelenaere
Jz4740 supports the clock framework but doesn't have HAVE_CLK defined, so define it! Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> To: linux-mips@linux-mips.org To: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/2112/ Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS: Move idle task creation to work queueMaksim Rayskiy
To avoid forking usermode thread when creating an idle task, move fork_idle to a work queue. If kernel starts with maxcpus= option which does not bring all available cpus online at boot time, idle tasks for offline cpus are not created. If later offline cpus are hotplugged through sysfs, __cpu_up is called in the context of the user task, and fork_idle copies its non-zero mm pointer. This causes BUG() in per_cpu_trap_init. This also avoids issues with resource limits of the CPU writing to sysfs, containers, maybe others. Signed-off-by: Maksim Rayskiy <mrayskiy@broadcom.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2070/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS, Perf-events: Use unsigned delta for right shift in event updateDeng-Cheng Zhu
Leverage the commit for ARM by Will Deacon: - 446a5a8b1eb91a6990e5c8fe29f14e7a95b69132 ARM: 6205/1: perf: ensure counter delta is treated as unsigned Hardware performance counters on ARM are 32-bits wide but atomic64_t variables are used to represent counter data in the hw_perf_event structure. The armpmu_event_update function right-shifts a signed 64-bit delta variable and adds the result to the event count. This can lead to shifting in sign-bits if the MSB of the 32-bit counter value is set. This results in perf output such as: Performance counter stats for 'sleep 20': 18446744073460670464 cycles <-- 0xFFFFFFFFF12A6000 7783773 instructions # 0.000 IPC 465 context-switches 161 page-faults 1172393 branches 20.154242147 seconds time elapsed This patch ensures that the delta value is treated as unsigned so that the right shift sets the upper bits to zero. Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: a.p.zijlstra@chello.nl To: fweisbec@gmail.com To: will.deacon@arm.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: wuzhangjin@gmail.com Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: matt@console-pimps.org Cc: sshtylyov@mvista.com Patchwork: http://patchwork.linux-mips.org/patch/2015/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS, Perf-events: Work with the new callchain interfaceDeng-Cheng Zhu
This is the MIPS part of the following commits by Frederic Weisbecker: - f72c1a931e311bb7780fee19e41a89ac42cab50e perf: Factorize callchain context handling Store the kernel and user contexts from the generic layer instead of archs, this gathers some repetitive code. - 56962b4449af34070bb1994621ef4f0265eed4d8 perf: Generalize some arch callchain code - Most archs use one callchain buffer per cpu, except x86 that needs to deal with NMIs. Provide a default perf_callchain_buffer() implementation that x86 overrides. - Centralize all the kernel/user regs handling and invoke new arch handlers from there: perf_callchain_user() / perf_callchain_kernel() That avoid all the user_mode(), current->mm checks and so... - Invert some parameters in perf_callchain_*() helpers: entry to the left, regs to the right, following the traditional (dst, src). - 70791ce9ba68a5921c9905ef05d23f62a90bc10c perf: Generalize callchain_store() callchain_store() is the same on every archs, inline it in perf_event.h and rename it to perf_callchain_store() to avoid any collision. This removes repetitive code. - c1a65932fd7216fdc9a0db8bbffe1d47842f862c perf: Drop unappropriate tests on arch callchains Drop the TASK_RUNNING test on user tasks for callchains as this check doesn't seem to make any sense. Also remove the tests for !current that is not supposed to happen and current->pid as this should be handled at the generic level, with exclude_idle attribute. Reported-by: Wu Zhangjin <wuzhangjin@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: a.p.zijlstra@chello.nl To: will.deacon@arm.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: dengcheng.zhu@gmail.com Cc: matt@console-pimps.org Cc: sshtylyov@mvista.com Patchwork: http://patchwork.linux-mips.org/patch/2014/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS, Perf-events: Fix event check in validate_event()Deng-Cheng Zhu
Ignore events that are in off/error state or belong to a different PMU. This patch originates from the following commit for ARM by Will Deacon: - 65b4711ff513767341aa1915c822de6ec0de65cb ARM: 6352/1: perf: fix event validation The validate_event function in the ARM perf events backend has the following problems: 1.) Events that are disabled count towards the cost. 2.) Events associated with other PMUs [for example, software events or breakpoints] do not count towards the cost, but do fail validation, causing the group to fail. This patch changes validate_event so that it ignores events in the PERF_EVENT_STATE_OFF state or that are scheduled for other PMUs. Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: a.p.zijlstra@chello.nl To: fweisbec@gmail.com To: will.deacon@arm.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: wuzhangjin@gmail.com Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: dengcheng.zhu@gmail.com Cc: matt@console-pimps.org Cc: sshtylyov@mvista.com Cc: ddaney@caviumnetworks.com Patchwork: http://patchwork.linux-mips.org/patch/2013/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS, Perf-events: Work with the new PMU interfaceDeng-Cheng Zhu
This is the MIPS part of the following commits by Peter Zijlstra: - a4eaf7f14675cb512d69f0c928055e73d0c6d252 perf: Rework the PMU methods Replace pmu::{enable,disable,start,stop,unthrottle} with pmu::{add,del,start,stop}, all of which take a flags argument. The new interface extends the capability to stop a counter while keeping it scheduled on the PMU. We replace the throttled state with the generic stopped state. This also allows us to efficiently stop/start counters over certain code paths (like IRQ handlers). It also allows scheduling a counter without it starting, allowing for a generic frozen state (useful for rotating stopped counters). The stopped state is implemented in two different ways, depending on how the architecture implemented the throttled state: 1) We disable the counter: a) the pmu has per-counter enable bits, we flip that b) we program a NOP event, preserving the counter state 2) We store the counter state and ignore all read/overflow events For MIPSXX, the stopped state is implemented in the way of 1.b as above. - 33696fc0d141bbbcb12f75b69608ea83282e3117 perf: Per PMU disable Changes perf_disable() into perf_pmu_disable(). - 24cd7f54a0d47e1d5b3de29e2456bfbd2d8447b7 perf: Reduce perf_disable() usage Since the current perf_disable() usage is only an optimization, remove it for now. This eases the removal of the __weak hw_perf_enable() interface. - b0a873ebbf87bf38bf70b5e39a7cadc96099fa13 perf: Register PMU implementations Simple registration interface for struct pmu, this provides the infrastructure for removing all the weak functions. - 51b0fe39549a04858001922919ab355dee9bdfcf perf: Deconstify struct pmu sed -ie 's/const struct pmu\>/struct pmu/g' `git grep -l "const struct pmu\>"` Reported-by: Wu Zhangjin <wuzhangjin@gmail.com> Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: a.p.zijlstra@chello.nl To: fweisbec@gmail.com To: will.deacon@arm.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: wuzhangjin@gmail.com Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: dengcheng.zhu@gmail.com Cc: matt@console-pimps.org Cc: sshtylyov@mvista.com Cc: ddaney@caviumnetworks.com Patchwork: http://patchwork.linux-mips.org/patch/2012/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS, Perf-events: Work with irq_workDeng-Cheng Zhu
This is the MIPS part of the following commit by Peter Zijlstra: - e360adbe29241a0194e10e20595360dd7b98a2b3 irq_work: Add generic hardirq context callbacks Provide a mechanism that allows running code in IRQ context. It is most useful for NMI code that needs to interact with the rest of the system -- like wakeup a task to drain buffers. Perf currently has such a mechanism, so extract that and provide it as a generic feature, independent of perf so that others may also benefit. The IRQ context callback is generated through self-IPIs where possible, or on architectures like powerpc the decrementer (the built-in timer facility) is set to generate an interrupt immediately. Architectures that don't have anything like this get to do with a callback from the timer tick. These architectures can call irq_work_run() at the tail of any IRQ handlers that might enqueue such work (like the perf IRQ handler) to avoid undue latencies in processing the work. For MIPSXX, we need to call irq_work_run() at the tail of the perf IRQ handler as described above. Reported-by: Wu Zhangjin <wuzhangjin@gmail.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: fweisbec@gmail.com To: will.deacon@arm.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: matt@console-pimps.org Cc: sshtylyov@mvista.com, Patchwork: http://patchwork.linux-mips.org/patch/2011/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS: Fix always CONFIG_LOONGSON_UART_BASE=yYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2055/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS: Loongson: Fix potentially wrong string handlingStefan Weil
This error was reported by cppcheck: arch/mips/loongson/common/machtype.c:56: error: Dangerous usage of 'str' (strncpy doesn't always 0-terminate it) If strncpy copied MACHTYPE_LEN bytes, the destination string str was not terminated. The patch adds one more byte to str and makes sure that this byte is always 0. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Cc: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Arnaud Patard <apatard@mandriva.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/2053/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS: Fix GCC-4.6 'set but not used' warning in arch/mips/mm/init.cDavid Daney
Under some combinations of CONFIG_*, lastpfn in page_is_ram is 'set but not used'. Mark it as __maybe_unused to quiet the warning/error. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2033/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS: Fix GCC-4.6 'set but not used' warning in ieee754int.hDavid Daney
GCC-4.6 can find more unused code than previous versions could. In the case of arch/mips/math-emu/ieee754int.h, the COMPXSP and COMPXDP macros are used in several places, but a couple of them leave xs unused. The easiest thing to do is mark it as __maybe_unused to quiet the warning. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2032/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS: Remove unused code from arch/mips/kernel/syscall.cDavid Daney
The variable arg3 in _sys_sysmips() is unused. Remove it. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2034/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS: Fix GCC-4.6 'set but not used' warning in signal*.cDavid Daney
GCC-4.6 can find more unused code than previous versions could. In the case of protected_restore_fp_context{,32}, the variable tmp is really used. Its use is tricky in that we really care about the side effects of the __put_user() calls. So we must mark tmp with __maybe_unused to quiet the warning. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2035/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS: MSP: Fix MSP71xx bpci interrupt handler return valueAnoop P A
Signed-off-by: Anoop P A <anoop.pa@gmail.com> To: Ben Hutchings <ben@decadent.org.uk> To: linux-mips@linux-mips.org To: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1804/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS: Select R4K timer lib for all MSP platformsAnoop P A
Signed-off-by: Anoop P A <anoop.pa@gmail.com> To: linux-mips@linux-mips.org To: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1803/ Tested-by: Shane McDonald <mcdonald.shane@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS: Loongson: Remove ad-hoc cmdline defaultRobert Millan
Loongson builds have an ad-hoc cmdline default of "console=ttyS0,115200 root=/dev/hda1". These settings come from a vendor; I remember builds from Lemote branch requiring a "console=tty" override in order to get a working console. At least on Yeeloong, they're particularly useless: there's no external serial port, and the IDE drive is now recognised as /dev/sda. Signed-off-by: Robert Millan <rmh@gnu.org> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1759/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS: Clear the correct flag in sysmips(MIPS_FIXADE, ...).Stefan Oberhumer
The sysmips(MIPS_FIXADE, ...) case contains an obvious copy-and-paste error in the handling of the TIF_LOGADE flag. Fix that Patchwork: https://patchwork.linux-mips.org/patch/1997/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS: Add an unreachable return statement to satisfy buggy GCCs.David Daney
It was reported that GCC-4.3.3 (with CodeSourcery extensions) fails without this. Reported-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2010/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS, Tracing: Fix set_graph_function of function graph tracerWu Zhangjin
trace.func should be set to the recorded ip of the mcount calling site in the __mcount_loc section to filter the function entries configured through the tracing/set_graph_function interface, but before, this is set to the self_ra(the return address of mcount), which has made set_graph_function not work as expected. This fixes it via calculating the right recorded ip in the __mcount_loc section and assign it to trace.func. Reported-by: Zhiping Zhong <xzhong86@163.com> Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Steven Rostedt <srostedt@redhat.com> Cc: Sergei Shtylyov <sshtylyov@mvista.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2017/ Signed-off-by: Ralf Baechle <ralf@duck.linux-mips.net>
2011-03-14MIPS, Tracing: Clean up ftrace_make_nop()Wu Zhangjin
This moves the comments out of ftrace_make_nop() and cleans it. At the same time, a macro MCOUNT_OFFSET_INSNS is defined for sharing with the next patch. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Steven Rostedt <srostedt@redhat.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2008/ Signed-off-by: Ralf Baechle <ralf@duck.linux-mips.net>
2011-03-14MIPS, Tracing: Clean up prepare_ftrace_return()Wu Zhangjin
The old prepare_ftrace_return() for MIPS is confused and have introduced some problem. This patch cleans up the names of the arguments, variables and related functions. For MIPS, the 2nd argument of prepare_ftrace_return() is not really the 'selfpc' described in ftrace-design.txt but instead it is the self return address. This did break the compatibility of the generic interface but really reduced one unneeded calculation for to get the current function name, the parent return address and the self return address are enough, no need to tranform the self return address to the self address. But set_graph_function of function graph tracer is an exception, it does need the 2nd argument of prepare_ftrace_return() as 'selfpc', for it will use 'selfpc' to match user's configuration of function graph entries, but in reality, it doesn't need the 'selfpc' but the recorded ip address of the mcount calling site in the __mcount_loc section. So, the 2nd argument of prepare_ftrace_return() is not important, the real requirement is the right recorded ip address should be calculated and assign to trace.func, this will be fixed in the next patches. Reported-by: Zhiping Zhong <xzhong86@163.com> Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Steven Rostedt <srostedt@redhat.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2007/ Signed-off-by: Ralf Baechle <ralf@duck.linux-mips.net>
2011-03-14MIPS, Tracing: Substitute in_kernel_space() for in_module()Wu Zhangjin
The old in_module() may not work in some situations(e.g. when module & kernel are in the same address space when CONFIG_MAPPED_KERNEL=y), The in_kernel_space() is more generic and it is also easy to be implemented via cloning the existing core_kernel_text(), so, replace the in_module() with in_kernel_space(). Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Steven Rostedt <srostedt@redhat.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2005/ Signed-off-by: Ralf Baechle <ralf@duck.linux-mips.net>
2011-03-14MIPS, Tracing: Speed up function graph tracerWu Zhangjin
This simply moves the "ip-=4" statement down to the end of the do { ... } while (...); loop, which reduces one unneeded subtration and the subsequent memory loading and comparison. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Steven Rostedt <srostedt@redhat.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2006/ Signed-off-by: Ralf Baechle <ralf@duck.linux-mips.net>
2011-03-14MIPS: Replace deprecated spinlock initializationThomas Gleixner
SPIN_LOCK_UNLOCK is deprecated. Use the lockdep capable variant instead. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2025/ Signed-off-by: Ralf Baechle <ralf@duck.linux-mips.net>
2011-03-14Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6Linus Torvalds
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: NFS: NFSROOT should default to "proto=udp" nfs4: remove duplicated #include NFSv4: nfs4_state_mark_reclaim_nograce() should be static NFSv4: Fix the setlk error handler NFSv4.1: Fix the handling of the SEQUENCE status bits NFSv4/4.1: Fix nfs4_schedule_state_recovery abuses NFSv4.1 reclaim complete must wait for completion NFSv4: remove duplicate clientid in struct nfs_client NFSv4.1: Retry CREATE_SESSION on NFS4ERR_DELAY sunrpc: Propagate errors from xs_bind() through xs_create_sock() (try3-resend) Fix nfs_compat_user_ino64 so it doesn't cause problems if bit 31 or 63 are set in fileid nfs: fix compilation warning nfs: add kmalloc return value check in decode_and_add_ds SUNRPC: Remove resource leak in svc_rdma_send_error() nfs: close NFSv4 COMMIT vs. CLOSE race SUNRPC: Close a race in __rpc_wait_for_completion_task()
2011-03-14Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon: fix problem with changing active VRAM size. (v2)
2011-03-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: watchdog: hpwdt: eliminate section mismatch warning watchdog: w83697ug_wdt: Fix set bit 0 to activate GPIO2 watchdog: sch311x_wdt: fix printk condition watchdog: sch311x_wdt: Fix LDN active check watchdog: cpwd: Fix buffer-overflow
2011-03-14Fix corrupted OSF partition table parsingTimo Warns
The kernel automatically evaluates partition tables of storage devices. The code for evaluating OSF partitions contains a bug that leaks data from kernel heap memory to userspace for certain corrupted OSF partitions. In more detail: for (i = 0 ; i < le16_to_cpu(label->d_npartitions); i++, partition++) { iterates from 0 to d_npartitions - 1, where d_npartitions is read from the partition table without validation and partition is a pointer to an array of at most 8 d_partitions. Add the proper and obvious validation. Signed-off-by: Timo Warns <warns@pre-sense.de> Cc: stable@kernel.org [ Changed the patch trivially to not repeat the whole le16_to_cpu() thing, and to use an explicit constant for the magic value '8' ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-22 10:49:35 +0000